Timeline
11/24/11:
- 22:23 Changeset [12641] by
- fixed bug
- 16:04 Changeset [12640] by
- same as gainfit.C but makes a 3-Gaussian fit over a amplitude spectrum
- 15:53 Changeset [12639] by
- Fixed a compiler warning.
- 15:51 Changeset [12638] by
- Some little improvement to command descriptions.
- 15:50 Changeset [12637] by
- fMjd now Unix time.
- 15:50 Changeset [12636] by
- Adapted writing of TSTART and TSTOP to fMjd in the data logger now being unix time.
- 15:49 Changeset [12635] by
- Adapted handling of rate scan service.
- 15:45 Changeset [12634] by
- Initialize the trigger counters to zero.
- 08:39 Changeset [12633] by
- added check if /daq is mounted
- 08:38 Changeset [12632] by
- added new values, rearranged checks
- 08:38 Changeset [12631] by
- added output of df -h
11/23/11:
- 14:21 Changeset [12630] by
- Removed an obsolete fGeomCam; make sure that everything is initialized properly
- 14:18 Changeset [12629] by
- Make the result of the noise alculation valid, so that it can directly be used on the tasklist.
- 14:17 Changeset [12628] by
- Make sure that no name for the mapping can be given; print the name in the error message; Get the runtype from the header; Use PCTime as a fallback to UnixTimePC
- 14:15 Changeset [12627] by
- Do not print the mapping table of the header by default.
- 14:13 Changeset [12626] by
- Return the dfeault constructor rather then 0, to allow using of the template for string
- 14:09 Changeset [12625] by
- Added possibility to return mean and rms in GetPixelContant
- 14:05 Changeset [12624] by
- Rotated camera by 90 deg
- 05:42 Changeset [12623] by
- added new version of start and stop time
- 05:41 Changeset [12622] by
- added logging
- 05:40 Changeset [12621] by
- added some logging
11/22/11:
- 23:58 Changeset [12620] by
- Removed some stray endl in messages.
- 23:52 Changeset [12619] by
- Implemented writing to the header whether a corresponding drs-calib file should exist.
- 23:39 Changeset [12618] by
- Implemented Time::UnixDate and use this instead of UnixTime when writing TSTART and TSTOP in FITS header -- units there are days not seconds.
- 23:02 Changeset [12617] by
- Removed some debug output.
- 14:13 Changeset [12616] by
- Changed TSTART/TSTOP according to match the latest changes in the raw data header.
- 14:10 Changeset [12615] by
- Some fixed to the latest changes.
- 13:44 Changeset [12614] by
- 13:27 Changeset [12613] by
- Implemented TSTART and TSTOP as integral and fractional part of Unix times (seee MJDREF) and DAT-OBS and DATE-END as the start and stop human readable time stamp
- 13:27 Changeset [12612] by
- Set the file format back to kCalib if the thrid drs calibration run is reset
- 13:20 Changeset [12611] by
- Added MJDREF and TIMEUNIT to header.
- 07:59 Changeset [12610] by
- added pyscripts folder to tools added fsc3.py, fscvolt1.py for plotting voltages and temperature added paux.py for running on a set of data files
- 06:18 Changeset [12609] by
- added new information and checks
- 02:22 Changeset [12608] by
- added new databases to backup list
11/21/11:
- 22:15 Changeset [12607] by
- this file is cited as an example in the README and hence I added it here, but its maintained version will be put into another place (I think of tools/python)
- 22:11 Changeset [12606] by
- various updates of the contents and the form, not finished
- 17:55 Changeset [12605] by
- Implemented counters for the different trigger types and time of first and last event.
- 14:54 Changeset [12604] by
- added fana2.C, a working version of fana.C
- 13:27 Changeset [12603] by
- Plotter for the fact pointing.
- 13:26 Changeset [12602] by
- First FACT pointing model
- 13:24 Changeset [12601] by
- First fact tpoints.
- 13:11 Changeset [12600] by
- Display the first point correctly
- 13:10 Changeset [12599] by
- Added a command to set the LED brightness in FACT; changed the units of the errors in FACT; make use of the 'real' MJD in the report; added the pdo3 status to the end of the report
- 13:08 Changeset [12598] by
- Implemented a new class MTcpIpFact using a duplex communication for FACT
- 13:06 Changeset [12597] by
- Replaced MTcpIpIO by MTcpIpFact for FACT
- 13:03 Changeset [12596] by
- Removed the zenith angle position correction for FACT
- 13:02 Changeset [12595] by
- Added some more output. Fill fCosy->fMJD and update nominal RaDec during tracking; changed the control loop parameters and the position alignment for FACT
- 12:57 Changeset [12594] by
- Skip starguider mode for FACT
- 12:56 Changeset [12593] by
- Made the fTPoint public to allow the FACT Cosy to access it.
- 12:55 Changeset [12592] by
- Added the MJD for transmission with the reports
- 12:54 Changeset [12591] by
- Changed the starguider command to make it work with FACT; added the WM_LEDS to be able to set the FACT LED voltages; added the status to the reports; make stat1 and stat2 two bytes long when updating the GUI
- 11:33 Changeset [12590] by
- Removed special fact status -- unified already in MCosy.cc
- 11:31 Changeset [12589] by
- Added possibility to track celestial objects; adapted status bit pattern for pdo3 for FACT
- 11:24 Changeset [12588] by
- Added new ReadSocket code for FACT SPS... should be used in MAGIC SPS, too.
- 11:17 Changeset [12587] by
- Added sending the command to set the FACT Led voltages
- 11:16 Changeset [12586] by
- Added a missing output in case there are zombies in the network.
- 09:02 Changeset [12585] by
- Updated to v19r26.
- 06:58 Changeset [12584] by
- added (script to check aux data files and fill information into database)
- 06:57 Changeset [12583] by
- added (script to check raw data files and fill information into database)
- 06:56 Changeset [12582] by
- changed to take into account the current and the 3 previous nights
- 04:05 Changeset [12581] by
- GetDrsOffset.C initial commit
- 02:07 Changeset [12580] by
- ingnore root dependency files *.d now
- 01:47 Changeset [12579] by
- GetN(const string &key) produces now decent error output in case of not found key
- 01:26 Changeset [12578] by
- remove Maxima Below accepts negative thresholds now
11/20/11:
- 07:14 Changeset [12577] by
- adapted times of crons
- 07:13 Changeset [12576] by
- changed to new structure (nfs mount of disk); bugfix
- 07:11 Changeset [12575] by
- included algorithm to make sure that only finished files are zipped
- 01:59 Changeset [12574] by
- comment
- 00:43 Changeset [12573] by
- FACT Pseudorandom trigger generator code initial commit
- 00:11 Changeset [12572] by
- fixed typo
11/19/11:
- 23:41 Changeset [12571] by
- Fixed more option description.
- 23:40 Changeset [12570] by
- Fixed some option description.
- 06:06 Changeset [12569] by
- changed time for zip cron
- 06:05 Changeset [12568] by
- added cron to copy db backup
- 06:02 Changeset [12567] by
- added (script to backup LP DB in Wue)
- 04:56 Changeset [12566] by
- changed MAILTO
- 04:56 Changeset [12565] by
- minor changes
- 04:55 Changeset [12564] by
- added (crontab file for fact_opr on fact-viewer)
- 03:49 Changeset [12563] by
- added (script to rsync raw data to Wuerzburg for backup)
- 03:48 Changeset [12562] by
- added (script to rsync auxiliary data to Wuerzburg for backup)
- 03:45 Changeset [12561] by
- minor changes
- 02:27 Changeset [12560] by
- adapted times for rsync and diskcheck scripts
- 02:25 Changeset [12559] by
- implemented bwlimit between 18h and 8h
- 02:24 Changeset [12558] by
- changed limit to 200 GB
11/18/11:
- 20:36 Changeset [12557] by
- changed such that only last night is rsynced
- 18:22 Changeset [12556] by
- ...now has most propable Single peak in one Histogram with Landau-fit
- 15:07 Changeset [12555] by
- Added the UNIX start-time to the report.
- 04:27 Changeset [12554] by
- bufix
- 02:18 Changeset [12553] by
- adapted times for disk usage check
- 02:06 Changeset [12552] by
- bugfix
11/17/11:
- 17:54 Changeset [12551] by
- added warning in case of time difference larger than 1 second
- 17:32 Changeset [12550] by
- added (cronjob file for gui)
- 17:30 Changeset [12549] by
- added new scripts
- 17:28 Changeset [12548] by
- added (script to check disk usage on data taking machines)
- 17:25 Changeset [12547] by
- added (script to zip raw data on data)
- 17:25 Changeset [12546] by
- added (scripts to rsync raw and aux files from daq to data)
- 15:00 Changeset [12545] by
- added export of Overlay Maximum into histogram
- 04:04 Changeset [12544] by
- added MAILTO
11/16/11:
- 23:03 Changeset [12543] by
- Added file.
- 22:58 Changeset [12542] by
- Start the calibration even when the voltage is off
- 22:02 Changeset [12541] by
- Added drivectrl.
- 21:55 Changeset [12540] by
- Fixed a bug which could cause crahses when a transmission is interrupted at the moment the connection is opened and e.g. the bias crate is not yet switched on.
- 18:37 Changeset [12539] by
- Adapted run-type names
- 15:53 Changeset [12538] by
- moved the flush from every row entry to every minute
- 15:44 Changeset [12537] by
- added services descriptions
- 12:09 Changeset [12536] by
- added flushing of nightly files after each row
- 10:24 Changeset [12535] by
- fixed a poorly dealt with closing of files once a day. Should be better now
- 03:58 Changeset [12534] by
- Improved some log message
- 00:37 Changeset [12533] by
- Fixed query to not get deleted entries from teh database.
- 00:27 Changeset [12532] by
- Added a drive status dim service.
- 00:25 Changeset [12531] by
- Fixed the number of lines expected from a GPAD map file.
- 00:22 Changeset [12530] by
- Removed a stray whitespace
- 00:19 Changeset [12529] by
- The CRAEATOR of all programs is not datalogger
- 00:18 Changeset [12528] by
- Removed some obsolete fad commands; fixed some signal/slot names; some resizing
11/15/11:
- 20:54 Changeset [12527] by
- faster abort in case of wrong ROI calib file
- 19:27 Changeset [12526] by
- Added descriptions for some states.
- 19:26 Changeset [12525] by
- Included rate control into the mcp status.
- 14:10 Changeset [12524] by
- Removed a compiler warning.
- 14:10 Changeset [12523] by
- Added widgets for the control of the file format.
- 14:09 Changeset [12522] by
- Added a new service FILE_FORMAT to distribute the file format currently switched on; added controlos and displays to set and see the file format.
- 11:56 Changeset [12521] by
- supports new DRS calibration and new fits open methods
- 02:47 Changeset [12520] by
- Do not swap the package length... for some unknown reasons this also doesn't work an produce crashes.
11/14/11:
- 23:54 Changeset [12519] by
- this way of subtracting TriggerOffset minimizes the mean and rms
- 20:06 Changeset [12518] by
- works now with the current DrsCalibration.C and openXXXFits.c
- 19:39 Changeset [12517] by
- should work now ...
- 19:38 Changeset [12516] by
- missing semicolon
- 19:15 Changeset [12515] by
- default value for verbosity Level
- 19:14 Changeset [12514] by
- try with new calibration
- 19:14 Changeset [12513] by
- next try
- 17:07 Changeset [12512] by
- debugged typo
- 16:05 Changeset [12511] by
- tried to prepare for all ROIs and added a lot of comments
- 14:45 Changeset [12510] by
- Removed + and - from fits column names.
- 09:11 Changeset [12509] by
- trying to generalize fits file opening
- 05:45 Changeset [12508] by
- 1st step towards calibrating all ROIs
11/13/11:
- 18:06 Changeset [12507] by
- Removed the GAPD voltage from the PixelMap and implemented a BiasMap class instead wich content are read from a special file containing the nominal voltages and the offsets.
- 16:50 Changeset [12506] by
- Moved more variable declarations into the for loops, improved log-messages, removed some compiler warnings.
- 15:42 Changeset [12505] by
- Do not change rates if a ratescan is in progress.
- 15:39 Changeset [12504] by
- Stop the rate scan if the trigger rate is zero.
11/12/11:
- 16:10 Changeset [12503] by
- Make sure that we don't get exceptions from old drs calib files without time marker channels (NTM)
- 01:34 Changeset [12502] by
- runnable with just the first 3 parameters
- 01:27 Changeset [12501] by
- Implemented commands and buttons to start a drs calibration and to reset the secondary baseline.
- 01:26 Changeset [12500] by
- Some fixes to the new AddT to make it compile.
- 01:26 Changeset [12499] by
- Implemented commands and buttons to start a drs calibration and to reset the secondary baseline.
- 01:25 Changeset [12498] by
- Implemented commands and buttons to start a drs calibration and to reset the secondary baseline.
11/11/11:
- 03:29 Changeset [12497] by
- Changed the behaviour of the MCP reset button; added disable of ratescan controls
- 03:27 Changeset [12496] by
- Changed some rate scan widget names.
- 03:21 Changeset [12495] by
- Removed some obsolete calls to Reverse; correctly treat the fDNA
- 03:20 Changeset [12494] by
- Correctly scale the reference clock value; write DNA as hex value because 64bit values didn't work.
- 03:18 Changeset [12493] by
- Updated an error message and a fixed a problem with non-array columns.
- 02:48 Changeset [12492] by
- Removed hacked byte swapping from debugHead
- 02:47 Changeset [12491] by
- Fixed byte swapping after data reception; moved all counters into the for-loop scope thanks to switching to stdc in the configure.ac
- 01:51 Changeset [12490] by
- Set C to STDC
- 00:51 Changeset [12489] by
- Fixed some mistakes in the new algorithmsin gotNewRun and runOpen
- 00:48 Changeset [12488] by
- Added a warning in case no rates.
- 00:47 Changeset [12487] by
- Preliminary version of a time calibration algorithm
11/10/11:
- 12:49 Changeset [12486] by
- 04:33 Changeset [12485] by
- Extreme memory swapping
- 00:19 Changeset [12484] by
- Commented RUN because it should be identical to RUNID; removed the RUNTYPE and renamed TYPE to RUNTYPE; shortened and improved some descriptions
- 00:18 Changeset [12483] by
- Changed the ORGIN from ISDC to FACT
11/09/11:
- 22:48 Changeset [12482] by
- display the average of all pixels in the pixel curve
- 22:38 Changeset [12481] by
- Moved the RunDescription to HeadersFAD; added a new set which stores which runs are supposed to be opened; pipe the RunDescription in runOpen to Open
- 22:25 Changeset [12480] by
- adapted black-white listing to new requested behaviour
- 21:56 Changeset [12479] by
- Write the run-numbers to position 1,2,3 instead of 0,1,2; 0 is now used for the roi
- 21:53 Changeset [12478] by
- Added RunDescription as argument to Open
- 21:51 Changeset [12477] by
- Moved RunDescription to HeadersFAD, added it as a second argument to Open and write the run-type to the header.
- 21:48 Changeset [12476] by
- Changed the order of the first four uint32_t in the drs calibration
- 21:47 Changeset [12475] by
- Write ROI at the beginning of fStats so that we can skip it when writing the data correctly; added RunDescription to Open
- 19:55 Changeset [12474] by
- close runs when new ones arrive in event builder
- 17:02 Changeset [12473] by
- force gl1.0 and indirect rendering
- 16:48 Changeset [12472] by
- Updated the DRS calibration and added the display of the ROI
- 16:44 Changeset [12471] by
- Changed the Apply function to support the time marker channels; added the time marker channels to reading the FITS file; removed some old obsolete comments; adapted AddAbs and others to the usage of any other ROI than 1024
- 16:42 Changeset [12470] by
- Adapted the length of the fDimDrsCalibration format; added a proper error message if the path for InitRunNumber doesn't exist.
- 16:39 Changeset [12469] by
- Added the time marker channels to the DRS calibration; added the roi for the secondary baseline calculation; added the roi to the dim service; adapted the fStats handling accordingly.
- 16:31 Changeset [12468] by
- Updated mainly the length check for the DRS calibration.
- 13:10 Changeset [12467] by
- Newest version from the mcore directory. Fixed the bug in the PrintColumns()-function. The only other change I found was the renaming of ___err___ and ___all___ (before without _).
- 12:48 Changeset [12466] by
- Fixed the PrintKeys() bug, the function works now as expected. Changes: line 295-303 '!=' replaced by '=='.
- 02:58 Changeset [12465] by
- I am so tired2
- 02:55 Changeset [12464] by
- I am so tired
- 02:05 Changeset [12463] by
- check
- 02:01 Changeset [12462] by
- check
- 01:54 Changeset [12461] by
- unchecked calibrated data check box
- 01:12 Changeset [12460] by
- added double check before releasing memory
- 00:42 Changeset [12459] by
- fixed horrible roi checking
- 00:11 Changeset [12458] by
- Fixed a problem with the startup.
- 00:10 Changeset [12457] by
- A few small fixes, a more strict condition to find outliers, changed default rate to 75Hz
11/08/11:
- 23:53 Changeset [12456] by
- Do only go from configuring to configured if FTM is configured.
- 23:52 Changeset [12455] by
- Reordered some stuff; added the ROI to the DRS calibration informations.
- 23:47 Changeset [12454] by
- Added the number of cells per channel
- 19:58 Changeset [12453] by
- set TM channels to zero if not required (for DRS calib consistency)
- 14:19 Changeset [12452] by
- set unused TM channels mem to zero
11/07/11:
- 22:14 Changeset [12451] by
- removed setting roiTM to zero
- 18:38 Changeset [12450] by
- added columns descriptions for ftmctrl
- 12:27 Changeset [12449] by
- removed variable selectsize from functions and set size of select box depending on fMode
- 12:04 Changeset [12448] by
- updated size of select box for edit mode
- 12:04 Changeset [12447] by
- updated factDN
- 12:03 Changeset [12446] by
- updated size of select boxes for progs and keys
- 12:02 Changeset [12445] by
- changed sorting of po list to fix bug in compare
- 12:01 Changeset [12444] by
- updated size of select box; direct load of po list with click on program for edit mode
- 04:43 Changeset [12443] by
- added comments into fits files
- 03:21 Changeset [12442] by
- added autostart option
- 03:01 Changeset [12441] by
- Added a counter to skip the first rate report - for stability reasons.
- 03:01 Changeset [12440] by
- Fixed a wrong number in the RATE_CONTROL states.
- 00:15 Changeset [12439] by
- Changed the default rate scaling from 0 to 10 in the Rates tab
- 00:05 Changeset [12438] by
- Do not check the Socket state and the BusyOn flag in the header when comparing it with the configuration, otherwise it will fail as soon as this is set as new configuration.
- 00:04 Changeset [12437] by
- Added some more member functions to make debugging easier.
- 00:03 Changeset [12436] by
- Add 1 to fPrescaling in DimDynamicData to get a proper scale.
- 00:02 Changeset [12435] by
- First working version of a whole-camera-setup.
- 00:02 Changeset [12434] by
- Implemented starting of the rate control.
- 00:00 Changeset [12433] by
- Allow SET_THRESHOLD also in state configured to allow the ratecontrol to adapt the rates.
- 00:00 Changeset [12432] by
- Implemented correct rate control states.
11/06/11:
- 19:22 Changeset [12431] by
- added an extra safety check when removing services
- 18:32 Changeset [12430] by
- added writing of separate TM channels
- 18:10 Changeset [12429] by
- Added many more options and the possibility to control the global camera rate.
- 18:09 Changeset [12428] by
- Added the controlling of the rate control.
- 18:09 Changeset [12427] by
- Added rate control.
- 17:21 Changeset [12426] by
- removed cout
- 17:05 Changeset [12425] by
- updated viewer
- 17:04 Changeset [12424] by
- updated viewer
- 03:03 Changeset [12423] by
- Fixed some missing STL includes.
- 02:43 Changeset [12422] by
- fixed the fix of the fix
- 02:41 Changeset [12421] by
- Do not throw an exception if a server is deleted which is not in the list.
- 02:39 Changeset [12420] by
- fixed the fix
- 02:33 Changeset [12419] by
- changed closing behaviour of corrupted files
- 02:30 Changeset [12418] by
- Print a proper error message if rename() fails.
- 02:15 Changeset [12417] by
- Send a last current update request after the calibration is finished to make sure the gui gets an update.
- 02:15 Changeset [12416] by
- Stop the event update when the fEventStop is checked; enable the Calibrate button in the feedback tab only in its allowed state.
- 02:14 Changeset [12415] by
- Added the fFeedbackCalibrate button.
- 02:12 Changeset [12414] by
- Some simplifications; Added the Calibration button in the Feedback tab; Enabled the Stop button in the Events tab
- 02:10 Changeset [12413] by
- fixed a bug when detecting corrupted files
- 01:00 Changeset [12412] by
- Changed the coordinates such that the camera turns around its center not around pixel 0
11/05/11:
- 21:55 Changeset [12411] by
- Added new run-types
- 21:47 Changeset [12410] by
- added correct Rois extraction to event builder
- 21:39 Changeset [12409] by
- added PixelMap to sources of viewer
- 21:31 Changeset [12408] by
- removed debug messaged
- 21:17 Changeset [12407] by
- Fixed the group() memeber function
- 21:16 Changeset [12406] by
- Added the bias supply calibration coming from the feedback to the gui
- 21:14 Changeset [12405] by
- Replaced START_RUN by START_TRIGGER
- 21:13 Changeset [12404] by
- Fixed the run-times in minutes
- 21:13 Changeset [12403] by
- Replaced START_RUN by START_TRIGGER
- 21:12 Changeset [12402] by
- Replaced START_RUN by START_TRIGGER
- 21:12 Changeset [12401] by
- Fixed the verbose screen output
- 21:12 Changeset [12400] by
- Replaced START_RUN and STOP_RUN by START_TRIGFGER and STOP_TRIGGER
- 21:04 Changeset [12399] by
- Added the possibility to calibrate the offset of the currents of the bias supply
- 21:03 Changeset [12398] by
- Fixed so that all ROI of all ch9 are set correctly.
- 20:34 Changeset [12397] by
- turned camera
- 20:30 Changeset [12396] by
- turned camera
- 19:43 Changeset [12395] by
- added separate TM display, and remove TMs from RMS calculation
- 17:43 Changeset [12394] by
- Fixed the clearing of the rate-scan display
- 13:36 Changeset [12393] by
- removed typos and unused varaibles
- 13:32 Changeset [12392] by
- tidied up tpeak.C and put an entry into README.txt
- 10:53 Changeset [12391] by
- initial commit of flightpulser.C with an additional method in zerosearch.C and an entry in README.txt
11/04/11:
- 23:59 Changeset [12390] by
- fixed various things with the viewer
- 22:34 Changeset [12389] by
- short description of gainfit.C
- 22:28 Changeset [12388] by
- initial commit gainfit.C see README.txt
- 21:38 Changeset [12387] by
- added entry for fpeak_cfd.C ... gainfit will follow soon
- 21:28 Changeset [12386] by
- deleted
- 21:26 Changeset [12385] by
- corrected typo in filename
- 21:23 Changeset [12384] by
- adjusted to the changes in DrsCalibration.C and zerosearch.C
- 21:22 Changeset [12383] by
- Now the first 12 and the last 12 slices wil be removed from Ameas
- 21:21 Changeset [12382] by
- changed name of function, which removes Region, where the Maximum is found near the edge of the Region ... this most probably is not a real peak.
- 20:25 Changeset [12381] by
- adjusted to the new OpenDataFile() method
- 20:20 Changeset [12380] by
- garbage collection; deleted intermediate vector NextNeighbors; TODO how to check if everything is still alright?
- 20:18 Changeset [12379] by
- moved spike removal out of this file
- 19:58 Changeset [12378] by
- moved SpikeRemoval methods into dedicated files
- 19:14 Changeset [12377] by
- Fixed a command description and improved some log message.
- 19:12 Changeset [12376] by
- Removed the fFadLedRoi
- 19:12 Changeset [12375] by
- Removed the obsolete fFadLedRoi and enabled the widet which allows setting the roi for ch9
- 19:06 Changeset [12374] by
- Set the region of interest for channel 9 in addition, enabled the RoiCh9 controls.
- 19:03 Changeset [12373] by
- Changed name of pixel map for the time being.
- 17:30 Changeset [12372] by
- implemented chunk allocation of memory. Not optimal yet, but at least fadctrl uses one the amount it is supposed to use
- 15:12 Changeset [12371] by
- produces TH2F with an amplitude spektrum for all pixels
- 13:06 Changeset [12370] by
- added method to remove peaks, which sit on a falling edge of another peak
- 12:45 Changeset [12369] by
- cleaned up a bit ...still needs testing
- 12:44 Changeset [12368] by
- added another Function to open a Datafile ... see example use in fpeak_cfd.C
- 12:43 Changeset [12367] by
- drs calibration function 'getValue()' of Werner and another implementation
11/03/11:
- 13:58 Changeset [12366] by
- This a modified Version of dNeises fpeak, which produces a overlay-histogram of all darkcount-peaks
11/02/11:
- 15:58 Changeset [12365] by
- More comments in calscope_batch, and exclude spikes in the peakfinderscope.
- 15:19 Changeset [12364] by
- New version which is easier to use (by first getting the full calibrated event with FCalibrateEvent). Unfortunately a bit slower...
- 14:45 Changeset [12363] by
- This program plots all calibrated events of a file when pressing ENTER to continue, a to abort.
- 13:50 Changeset [12362] by
- New version of the calscope-script which is easier to adapt. The included file TPKplotevent was dropped for the FCalibrateEvent.C, which takes an event and returns an array with the DRS-calibrated pipeline.
- 12:43 Changeset [12361] by
- added zipscript, changed paths for rsync
- 05:35 Changeset [12360] by
- Do not check if waiting for answer in ExpertReste if this is a OC reset
- 05:34 Changeset [12359] by
- Added DRIVE_CONTROL led
- 05:34 Changeset [12358] by
- Simplified fad tab; added drive led
11/01/11:
- 15:46 Changeset [12357] by
- starting point for gain fit
- 14:59 Changeset [12356] by
- adjusted fbsl for ISDC cluster .. I basically renamed a few variables and generally tidied up a bit ... not sure what actually helped... maybe its still not solved.
- 04:36 Changeset [12355] by
- 04:35 Changeset [12354] by
- Added ratecontrol.
10/31/11:
- 21:25 Changeset [12353] by
- Removed an obsolete comment block
- 20:00 Changeset [12352] by
- Adapted output of filenames.
- 19:02 Changeset [12351] by
- Set some fixed control loop parameters as determined in Zurich; output also the state of the FSC
- 18:56 Changeset [12350] by
- Do directly set the new reference in SetReference.
- 18:55 Changeset [12349] by
- Removed the warning in case of double delete... so far no problems weere encountered.
- 18:53 Changeset [12348] by
- Use the connection to the DNS as the IP address to get the Local IP.
- 18:53 Changeset [12347] by
- Make the FEEDBACK receive the data all the time for a combined control of temp and amplitude
- 18:52 Changeset [12346] by
- Do not use statvfs in SetCurrentFolder.
- 18:51 Changeset [12345] by
- Display N/40 in decimal
- 17:41 Changeset [12344] by
- Removed obsolete DataCalib.h and DataCalib.cc from viewer.
- 14:52 Changeset [12343] by
- Moved some common code between MARS and FACT++ to DrsCalib.h as new class DrsCalibration; renamed CalibData to DrsCalibrate.
- 02:07 Changeset [12342] by
- Improved output; removed obsolste ?: operators.
- 00:11 Changeset [12341] by
- Fixed tha calculation of the average ethernet rate; removed min and max and removed the obsolete widgets from the Event builder tab.
- 00:10 Changeset [12340] by
- Unified FAD and EvtBuilder tab as much as possible.
- 00:01 Changeset [12339] by
- Renamed default pixel map file.
10/30/11:
- 23:56 Changeset [12338] by
- Renamed option ramp-time to ramp-delay
- 23:29 Changeset [12337] by
- Removed stray debug output.
- 22:38 Changeset [12336] by
- For the time being go back to idle when a new run was successfully started.
- 22:36 Changeset [12335] by
- Improved class reference.
- 22:36 Changeset [12334] by
- Renamed kTakingData to kTriggerOn
- 22:35 Changeset [12333] by
- Added GetNumFilesOpen and IncreaseRunNumber.
- 22:34 Changeset [12332] by
- Replaced kTakingData by kTriggerOn
- 22:34 Changeset [12331] by
- Added the state kWritingData and avoid that run-numbers can be decreased manually.
- 22:33 Changeset [12330] by
- Added state kWritingData.
- 22:32 Changeset [12329] by
- Changed the 'define all' and 'define err' in a way that it is less disturbing
- 22:31 Changeset [12328] by
- Renamed FTM::kTakingData to FTM::kTriggerOn
- 03:43 Changeset [12327] by
- replaces PCTime by UnixTimeUTC
- 03:41 Changeset [12326] by
- Removed comments; replaced code in Apply by ApplyCh; fixed the problem that the DRS calibration data was assumed to be of size roi/ch instead of 1024/ch
10/29/11:
- 22:31 Changeset [12325] by
- Show VoltageOff as a red bar in the status LED
- 21:48 Changeset [12324] by
- Fixed some litle stuff in the new ratescan tab.
- 21:37 Changeset [12323] by
- Added the possibility to change the step size and maximum during a ratescan.
- 20:57 Changeset [12322] by
- Allow eversything in fact++.rc
10/28/11:
- 22:23 Changeset [12321] by
- adapted paths for raw and aux data
- 21:49 Changeset [12320] by
- Do not set negative axis ranges in handleRateScan.
- 21:45 Changeset [12319] by
- Switch control off when voltage off.
- 20:28 Changeset [12318] by
- updated ldaphost
- 20:24 Changeset [12317] by
- bugfix for updating string
- 19:58 Changeset [12316] by
- Removed invalid characters from Dim descriptions
- 19:58 Changeset [12315] by
- Make sure that the default option gets touched even it is finally not needed.
- 19:57 Changeset [12314] by
- Stop startinga run if datalogger went into error state.
- 19:56 Changeset [12313] by
- Added an option to disable whole patches. fixed scaling factor in instaniation of Drim TriggerRates.
- 19:55 Changeset [12312] by
- Fixed a workaround.
- 19:54 Changeset [12311] by
- Fixed writing of the data.
- 11:37 Changeset [12310] by
- fixed a blur display bug
- 05:36 Changeset [12309] by
- First woring and tested version.
- 05:35 Changeset [12308] by
- Added specilized template to make sure we do not have to convert floats to ints
10/27/11:
- 22:14 Changeset [12307] by
- added '#define HAVE_ZLIB'
- 22:04 Changeset [12306] by
- added removeMaximaAbove method
- 21:36 Changeset [12305] by
- adjusted use of zerosearch() method ... this method doesn't return ints anymore, but struct Region see Region.h
- 21:35 Changeset [12304] by
- added symmetric sliding average filter
- 17:10 Changeset [12303] by
- Save spectra of gainanalysis to the file gainspectra.root.
- 16:45 Changeset [12302] by
- added clean destruction of qwt objects
- 16:35 Changeset [12301] by
- moved double click to single click
- 16:30 Changeset [12300] by
- added RMS tab and fixed time for old format
- 16:07 Changeset [12299] by
- Include #define HAVE_ZLIB for compressed data files.
- 16:00 Changeset [12298] by
- added fbsl.C ...extract baseline data
- 14:42 Changeset [12297] by
- added RMS tab
- 13:20 Changeset [12296] by
- added cron to rsync auxiliary and rawdata
- 04:59 Changeset [12295] by
- Addec code for the rate scan tab display
- 04:59 Changeset [12294] by
- Added sending of Dim services.
- 04:58 Changeset [12293] by
- Added controls for rate scan tab.
- 04:58 Changeset [12292] by
- Added tab for RateScans
- 01:21 Changeset [12291] by
- Use new features of trigger rate service.
- 00:20 Changeset [12290] by
- Included EnablePatch and a default constructor for the trigger rates.
- 00:11 Changeset [12289] by
- Store trigger rates for later display
10/26/11:
- 23:23 Changeset [12288] by
- Addec ontrols for N/4
- 23:20 Changeset [12287] by
- Adapted format string for TRIGGER_RATES
- 23:19 Changeset [12286] by
- Fixed a misspelled class name.
- 23:19 Changeset [12285] by
- Removed stray debug output.
- 23:03 Changeset [12284] by
- Added elapsed time and on time to DrimTriggerRate
- 23:01 Changeset [12283] by
- Display N/4 logic threshold
- 23:00 Changeset [12282] by
- Added some N/4 controls
- 19:44 Changeset [12281] by
- Added the most simple spike removal to the display -- sould be possible to switch it off.
- 19:43 Changeset [12280] by
- Added the most simple spike removal before the statistics for the eventdisplay (maxima, etc) are calculated.
- 19:42 Changeset [12279] by
- Added some more output in case the previous answer was not yet recived; reset the ramping state when a new connection was established; do not reset voltages if we were previously connected.
- 19:41 Changeset [12278] by
- Added a very simple spike removal algorithm.
- 11:41 Changeset [12277] by
- fixed the handling of columns names in the datalogger
- 11:00 Changeset [12276] by
- Moved declaration of parread_tmp to the other declarations of read parameters of the fit.
- 10:53 Changeset [12275] by
- Added more comments. Questions please to tpk@phys.ethz.ch.
10/25/11:
- 21:33 Changeset [12274] by
- Allow that UnixTimeUTC is missing.
- 21:32 Changeset [12273] by
- Implemented feedback controls
- 20:06 Changeset [12272] by
- Exchanged some values whcih were obviously exhanged
- 19:59 Changeset [12271] by
- Added the possibility to apply a global offset to the temperature controlled feedback values
- 19:51 Changeset [12270] by
- Added the possibility to switch off the update interval.
- 19:50 Changeset [12269] by
- Fixed wiritng the fits header.
- 19:49 Changeset [12268] by
- Fixed the output in the txt-file.
- 19:49 Changeset [12267] by
- Replaced the int16_t for dac by a uint16_t
- 19:48 Changeset [12266] by
- Disabled some broken sensor widgets by default
- 14:03 Changeset [12265] by
- removed needless include statement
- 14:02 Changeset [12264] by
- whitespaces
- 14:02 Changeset [12263] by
- a better example than fpeak_discri.C ... at least I hope so
- 13:55 Changeset [12262] by
- makes use of the new discriminators
- 13:53 Changeset [12261] by
- whitespaces only
- 13:52 Changeset [12260] by
- I case you want to see real raw data
- 13:52 Changeset [12259] by
- discriminator does now return vector<Region>
- 13:51 Changeset [12258] by
- zerosearch does now return vector<Region>
- 13:50 Changeset [12257] by
- vector<Region> are returned by most of my discriminators
- 13:50 Changeset [12256] by
- added zipped fits file support
- 13:49 Changeset [12255] by
- i know its wrong ... but i can't work without these files...
Note:
See TracTimeline
for information about the timeline view.
