Timeline



11/24/11:

22:23 Changeset [12641] by Daniela Dorner
fixed bug
16:04 Changeset [12640] by Jens Buss
same as gainfit.C but makes a 3-Gaussian fit over a amplitude spectrum
15:53 Changeset [12639] by tbretz
Fixed a compiler warning.
15:51 Changeset [12638] by tbretz
Some little improvement to command descriptions.
15:50 Changeset [12637] by tbretz
fMjd now Unix time.
15:50 Changeset [12636] by tbretz
Adapted writing of TSTART and TSTOP to fMjd in the data logger now being unix time.
15:49 Changeset [12635] by tbretz
Adapted handling of rate scan service.
15:45 Changeset [12634] by tbretz
Initialize the trigger counters to zero.
08:39 Changeset [12633] by Daniela Dorner
added check if /daq is mounted
08:38 Changeset [12632] by Daniela Dorner
added new values, rearranged checks
08:38 Changeset [12631] by Daniela Dorner
added output of df -h

11/23/11:

14:21 Changeset [12630] by tbretz
Removed an obsolete fGeomCam; make sure that everything is initialized properly
14:18 Changeset [12629] by tbretz
Make the result of the noise alculation valid, so that it can directly be used on the tasklist.
14:17 Changeset [12628] by tbretz
Make sure that no name for the mapping can be given; print the name in the error message; Get the runtype from the header; Use PCTime as a fallback to UnixTimePC
14:15 Changeset [12627] by tbretz
Do not print the mapping table of the header by default.
14:13 Changeset [12626] by tbretz
Return the dfeault constructor rather then 0, to allow using of the template for string
14:09 Changeset [12625] by tbretz
Added possibility to return mean and rms in GetPixelContant
14:05 Changeset [12624] by tbretz
Rotated camera by 90 deg
05:42 Changeset [12623] by Daniela Dorner
added new version of start and stop time
05:41 Changeset [12622] by Daniela Dorner
added logging
05:40 Changeset [12621] by Daniela Dorner
added some logging

11/22/11:

23:58 Changeset [12620] by tbretz
Removed some stray endl in messages.
23:52 Changeset [12619] by tbretz
Implemented writing to the header whether a corresponding drs-calib file should exist.
23:39 Changeset [12618] by tbretz
Implemented Time::UnixDate and use this instead of UnixTime when writing TSTART and TSTOP in FITS header -- units there are days not seconds.
23:02 Changeset [12617] by tbretz
Removed some debug output.
14:13 Changeset [12616] by tbretz
Changed TSTART/TSTOP according to match the latest changes in the raw data header.
14:10 Changeset [12615] by tbretz
Some fixed to the latest changes.
13:44 Changeset [12614] by tbretz
13:27 Changeset [12613] by tbretz
Implemented TSTART and TSTOP as integral and fractional part of Unix times (seee MJDREF) and DAT-OBS and DATE-END as the start and stop human readable time stamp
13:27 Changeset [12612] by tbretz
Set the file format back to kCalib if the thrid drs calibration run is reset
13:20 Changeset [12611] by tbretz
Added MJDREF and TIMEUNIT to header.
07:59 Changeset [12610] by lusterma
added pyscripts folder to tools added fsc3.py, fscvolt1.py for plotting voltages and temperature added paux.py for running on a set of data files
06:18 Changeset [12609] by Daniela Dorner
added new information and checks
02:22 Changeset [12608] by Daniela Dorner
added new databases to backup list

11/21/11:

22:15 Changeset [12607] by lusterma
this file is cited as an example in the README and hence I added it here, but its maintained version will be put into another place (I think of tools/python)
22:11 Changeset [12606] by lusterma
various updates of the contents and the form, not finished
17:55 Changeset [12605] by tbretz
Implemented counters for the different trigger types and time of first and last event.
14:54 Changeset [12604] by lusterma
added fana2.C, a working version of fana.C
13:27 Changeset [12603] by tbretz
Plotter for the fact pointing.
13:26 Changeset [12602] by tbretz
First FACT pointing model
13:24 Changeset [12601] by tbretz
First fact tpoints.
13:11 Changeset [12600] by tbretz
Display the first point correctly
13:10 Changeset [12599] by tbretz
Added a command to set the LED brightness in FACT; changed the units of the errors in FACT; make use of the 'real' MJD in the report; added the pdo3 status to the end of the report
13:08 Changeset [12598] by tbretz
Implemented a new class MTcpIpFact using a duplex communication for FACT
13:06 Changeset [12597] by tbretz
Replaced MTcpIpIO by MTcpIpFact for FACT
13:03 Changeset [12596] by tbretz
Removed the zenith angle position correction for FACT
13:02 Changeset [12595] by tbretz
Added some more output. Fill fCosy->fMJD and update nominal RaDec during tracking; changed the control loop parameters and the position alignment for FACT
12:57 Changeset [12594] by tbretz
Skip starguider mode for FACT
12:56 Changeset [12593] by tbretz
Made the fTPoint public to allow the FACT Cosy to access it.
12:55 Changeset [12592] by tbretz
Added the MJD for transmission with the reports
12:54 Changeset [12591] by tbretz
Changed the starguider command to make it work with FACT; added the WM_LEDS to be able to set the FACT LED voltages; added the status to the reports; make stat1 and stat2 two bytes long when updating the GUI
11:33 Changeset [12590] by tbretz
Removed special fact status -- unified already in MCosy.cc
11:31 Changeset [12589] by tbretz
Added possibility to track celestial objects; adapted status bit pattern for pdo3 for FACT
11:24 Changeset [12588] by tbretz
Added new ReadSocket code for FACT SPS... should be used in MAGIC SPS, too.
11:17 Changeset [12587] by tbretz
Added sending the command to set the FACT Led voltages
11:16 Changeset [12586] by tbretz
Added a missing output in case there are zombies in the network.
09:02 Changeset [12585] by tbretz
Updated to v19r26.
06:58 Changeset [12584] by Daniela Dorner
added (script to check aux data files and fill information into database)
06:57 Changeset [12583] by Daniela Dorner
added (script to check raw data files and fill information into database)
06:56 Changeset [12582] by Daniela Dorner
changed to take into account the current and the 3 previous nights
04:05 Changeset [12581] by neise
GetDrsOffset.C initial commit
02:07 Changeset [12580] by neise
ingnore root dependency files *.d now
01:47 Changeset [12579] by neise
GetN(const string &key) produces now decent error output in case of not found key
01:26 Changeset [12578] by neise
remove Maxima Below accepts negative thresholds now

11/20/11:

07:14 Changeset [12577] by Daniela Dorner
adapted times of crons
07:13 Changeset [12576] by Daniela Dorner
changed to new structure (nfs mount of disk); bugfix
07:11 Changeset [12575] by Daniela Dorner
included algorithm to make sure that only finished files are zipped
01:59 Changeset [12574] by neise
comment
00:43 Changeset [12573] by neise
FACT Pseudorandom trigger generator code initial commit
00:11 Changeset [12572] by Daniela Dorner
fixed typo

11/19/11:

23:41 Changeset [12571] by tbretz
Fixed more option description.
23:40 Changeset [12570] by tbretz
Fixed some option description.
06:06 Changeset [12569] by Daniela Dorner
changed time for zip cron
06:05 Changeset [12568] by Daniela Dorner
added cron to copy db backup
06:02 Changeset [12567] by Daniela Dorner
added (script to backup LP DB in Wue)
04:56 Changeset [12566] by Daniela Dorner
changed MAILTO
04:56 Changeset [12565] by Daniela Dorner
minor changes
04:55 Changeset [12564] by Daniela Dorner
added (crontab file for fact_opr on fact-viewer)
03:49 Changeset [12563] by Daniela Dorner
added (script to rsync raw data to Wuerzburg for backup)
03:48 Changeset [12562] by Daniela Dorner
added (script to rsync auxiliary data to Wuerzburg for backup)
03:45 Changeset [12561] by Daniela Dorner
minor changes
02:27 Changeset [12560] by Daniela Dorner
adapted times for rsync and diskcheck scripts
02:25 Changeset [12559] by Daniela Dorner
implemented bwlimit between 18h and 8h
02:24 Changeset [12558] by Daniela Dorner
changed limit to 200 GB

11/18/11:

20:36 Changeset [12557] by Daniela Dorner
changed such that only last night is rsynced
18:22 Changeset [12556] by Jens Buss
...now has most propable Single peak in one Histogram with Landau-fit
15:07 Changeset [12555] by tbretz
Added the UNIX start-time to the report.
04:27 Changeset [12554] by Daniela Dorner
bufix
02:18 Changeset [12553] by Daniela Dorner
adapted times for disk usage check
02:06 Changeset [12552] by Daniela Dorner
bugfix

11/17/11:

17:54 Changeset [12551] by Daniela Dorner
added warning in case of time difference larger than 1 second
17:32 Changeset [12550] by Daniela Dorner
added (cronjob file for gui)
17:30 Changeset [12549] by Daniela Dorner
added new scripts
17:28 Changeset [12548] by Daniela Dorner
added (script to check disk usage on data taking machines)
17:25 Changeset [12547] by Daniela Dorner
added (script to zip raw data on data)
17:25 Changeset [12546] by Daniela Dorner
added (scripts to rsync raw and aux files from daq to data)
15:00 Changeset [12545] by Jens Buss
added export of Overlay Maximum into histogram
04:04 Changeset [12544] by Daniela Dorner
added MAILTO

11/16/11:

23:03 Changeset [12543] by tbretz
Added file.
22:58 Changeset [12542] by tbretz
Start the calibration even when the voltage is off
22:02 Changeset [12541] by tbretz
Added drivectrl.
21:55 Changeset [12540] by tbretz
Fixed a bug which could cause crahses when a transmission is interrupted at the moment the connection is opened and e.g. the bias crate is not yet switched on.
18:37 Changeset [12539] by tbretz
Adapted run-type names
15:53 Changeset [12538] by lyard
moved the flush from every row entry to every minute
15:44 Changeset [12537] by lyard
added services descriptions
12:09 Changeset [12536] by lyard
added flushing of nightly files after each row
10:24 Changeset [12535] by lyard
fixed a poorly dealt with closing of files once a day. Should be better now
03:58 Changeset [12534] by tbretz
Improved some log message
00:37 Changeset [12533] by tbretz
Fixed query to not get deleted entries from teh database.
00:27 Changeset [12532] by tbretz
Added a drive status dim service.
00:25 Changeset [12531] by tbretz
Fixed the number of lines expected from a GPAD map file.
00:22 Changeset [12530] by tbretz
Removed a stray whitespace
00:19 Changeset [12529] by tbretz
The CRAEATOR of all programs is not datalogger
00:18 Changeset [12528] by tbretz
Removed some obsolete fad commands; fixed some signal/slot names; some resizing

11/15/11:

20:54 Changeset [12527] by neise
faster abort in case of wrong ROI calib file
19:27 Changeset [12526] by tbretz
Added descriptions for some states.
19:26 Changeset [12525] by tbretz
Included rate control into the mcp status.
14:10 Changeset [12524] by tbretz
Removed a compiler warning.
14:10 Changeset [12523] by tbretz
Added widgets for the control of the file format.
14:09 Changeset [12522] by tbretz
Added a new service FILE_FORMAT to distribute the file format currently switched on; added controlos and displays to set and see the file format.
11:56 Changeset [12521] by neise
supports new DRS calibration and new fits open methods
02:47 Changeset [12520] by tbretz
Do not swap the package length... for some unknown reasons this also doesn't work an produce crashes.

11/14/11:

23:54 Changeset [12519] by neise
this way of subtracting TriggerOffset minimizes the mean and rms
20:06 Changeset [12518] by neise
works now with the current DrsCalibration.C and openXXXFits.c
19:39 Changeset [12517] by neise
should work now ...
19:38 Changeset [12516] by neise
missing semicolon
19:15 Changeset [12515] by neise
default value for verbosity Level
19:14 Changeset [12514] by neise
try with new calibration
19:14 Changeset [12513] by neise
next try
17:07 Changeset [12512] by neise
debugged typo
16:05 Changeset [12511] by neise
tried to prepare for all ROIs and added a lot of comments
14:45 Changeset [12510] by tbretz
Removed + and - from fits column names.
09:11 Changeset [12509] by neise
trying to generalize fits file opening
05:45 Changeset [12508] by neise
1st step towards calibrating all ROIs

11/13/11:

18:06 Changeset [12507] by tbretz
Removed the GAPD voltage from the PixelMap and implemented a BiasMap class instead wich content are read from a special file containing the nominal voltages and the offsets.
16:50 Changeset [12506] by tbretz
Moved more variable declarations into the for loops, improved log-messages, removed some compiler warnings.
15:42 Changeset [12505] by tbretz
Do not change rates if a ratescan is in progress.
15:39 Changeset [12504] by tbretz
Stop the rate scan if the trigger rate is zero.

11/12/11:

16:10 Changeset [12503] by tbretz
Make sure that we don't get exceptions from old drs calib files without time marker channels (NTM)
01:34 Changeset [12502] by neise
runnable with just the first 3 parameters
01:27 Changeset [12501] by tbretz
Implemented commands and buttons to start a drs calibration and to reset the secondary baseline.
01:26 Changeset [12500] by tbretz
Some fixes to the new AddT to make it compile.
01:26 Changeset [12499] by tbretz
Implemented commands and buttons to start a drs calibration and to reset the secondary baseline.
01:25 Changeset [12498] by tbretz
Implemented commands and buttons to start a drs calibration and to reset the secondary baseline.

11/11/11:

03:29 Changeset [12497] by tbretz
Changed the behaviour of the MCP reset button; added disable of ratescan controls
03:27 Changeset [12496] by tbretz
Changed some rate scan widget names.
03:21 Changeset [12495] by tbretz
Removed some obsolete calls to Reverse; correctly treat the fDNA
03:20 Changeset [12494] by tbretz
Correctly scale the reference clock value; write DNA as hex value because 64bit values didn't work.
03:18 Changeset [12493] by tbretz
Updated an error message and a fixed a problem with non-array columns.
02:48 Changeset [12492] by tbretz
Removed hacked byte swapping from debugHead
02:47 Changeset [12491] by tbretz
Fixed byte swapping after data reception; moved all counters into the for-loop scope thanks to switching to stdc in the configure.ac
01:51 Changeset [12490] by tbretz
Set C to STDC
00:51 Changeset [12489] by tbretz
Fixed some mistakes in the new algorithmsin gotNewRun and runOpen
00:48 Changeset [12488] by tbretz
Added a warning in case no rates.
00:47 Changeset [12487] by tbretz
Preliminary version of a time calibration algorithm

11/10/11:

12:49 Changeset [12486] by neise
04:33 Changeset [12485] by lyard
Extreme memory swapping
00:19 Changeset [12484] by tbretz
Commented RUN because it should be identical to RUNID; removed the RUNTYPE and renamed TYPE to RUNTYPE; shortened and improved some descriptions
00:18 Changeset [12483] by tbretz
Changed the ORGIN from ISDC to FACT

11/09/11:

22:48 Changeset [12482] by lyard
display the average of all pixels in the pixel curve
22:38 Changeset [12481] by tbretz
Moved the RunDescription to HeadersFAD; added a new set which stores which runs are supposed to be opened; pipe the RunDescription in runOpen to Open
22:25 Changeset [12480] by lyard
adapted black-white listing to new requested behaviour
21:56 Changeset [12479] by tbretz
Write the run-numbers to position 1,2,3 instead of 0,1,2; 0 is now used for the roi
21:53 Changeset [12478] by tbretz
Added RunDescription as argument to Open
21:51 Changeset [12477] by tbretz
Moved RunDescription to HeadersFAD, added it as a second argument to Open and write the run-type to the header.
21:48 Changeset [12476] by tbretz
Changed the order of the first four uint32_t in the drs calibration
21:47 Changeset [12475] by tbretz
Write ROI at the beginning of fStats so that we can skip it when writing the data correctly; added RunDescription to Open
19:55 Changeset [12474] by lyard
close runs when new ones arrive in event builder
17:02 Changeset [12473] by lyard
force gl1.0 and indirect rendering
16:48 Changeset [12472] by tbretz
Updated the DRS calibration and added the display of the ROI
16:44 Changeset [12471] by tbretz
Changed the Apply function to support the time marker channels; added the time marker channels to reading the FITS file; removed some old obsolete comments; adapted AddAbs and others to the usage of any other ROI than 1024
16:42 Changeset [12470] by tbretz
Adapted the length of the fDimDrsCalibration format; added a proper error message if the path for InitRunNumber doesn't exist.
16:39 Changeset [12469] by tbretz
Added the time marker channels to the DRS calibration; added the roi for the secondary baseline calculation; added the roi to the dim service; adapted the fStats handling accordingly.
16:31 Changeset [12468] by tbretz
Updated mainly the length check for the DRS calibration.
13:10 Changeset [12467] by kraehenb
Newest version from the mcore directory. Fixed the bug in the PrintColumns()-function. The only other change I found was the renaming of ___err___ and ___all___ (before without _).
12:48 Changeset [12466] by kraehenb
Fixed the PrintKeys() bug, the function works now as expected. Changes: line 295-303 '!=' replaced by '=='.
02:58 Changeset [12465] by lyard
I am so tired2
02:55 Changeset [12464] by lyard
I am so tired
02:05 Changeset [12463] by lyard
check
02:01 Changeset [12462] by lyard
check
01:54 Changeset [12461] by lyard
unchecked calibrated data check box
01:12 Changeset [12460] by lyard
added double check before releasing memory
00:42 Changeset [12459] by lyard
fixed horrible roi checking
00:11 Changeset [12458] by tbretz
Fixed a problem with the startup.
00:10 Changeset [12457] by tbretz
A few small fixes, a more strict condition to find outliers, changed default rate to 75Hz

11/08/11:

23:53 Changeset [12456] by tbretz
Do only go from configuring to configured if FTM is configured.
23:52 Changeset [12455] by tbretz
Reordered some stuff; added the ROI to the DRS calibration informations.
23:47 Changeset [12454] by tbretz
Added the number of cells per channel
19:58 Changeset [12453] by lyard
set TM channels to zero if not required (for DRS calib consistency)
14:19 Changeset [12452] by lyard
set unused TM channels mem to zero

11/07/11:

22:14 Changeset [12451] by lyard
removed setting roiTM to zero
18:38 Changeset [12450] by lyard
added columns descriptions for ftmctrl
12:27 Changeset [12449] by Daniela Dorner
removed variable selectsize from functions and set size of select box depending on fMode
12:04 Changeset [12448] by Daniela Dorner
updated size of select box for edit mode
12:04 Changeset [12447] by Daniela Dorner
updated factDN
12:03 Changeset [12446] by Daniela Dorner
updated size of select boxes for progs and keys
12:02 Changeset [12445] by Daniela Dorner
changed sorting of po list to fix bug in compare
12:01 Changeset [12444] by Daniela Dorner
updated size of select box; direct load of po list with click on program for edit mode
04:43 Changeset [12443] by lyard
added comments into fits files
03:21 Changeset [12442] by lyard
added autostart option
03:01 Changeset [12441] by tbretz
Added a counter to skip the first rate report - for stability reasons.
03:01 Changeset [12440] by tbretz
Fixed a wrong number in the RATE_CONTROL states.
00:15 Changeset [12439] by tbretz
Changed the default rate scaling from 0 to 10 in the Rates tab
00:05 Changeset [12438] by tbretz
Do not check the Socket state and the BusyOn flag in the header when comparing it with the configuration, otherwise it will fail as soon as this is set as new configuration.
00:04 Changeset [12437] by tbretz
Added some more member functions to make debugging easier.
00:03 Changeset [12436] by tbretz
Add 1 to fPrescaling in DimDynamicData to get a proper scale.
00:02 Changeset [12435] by tbretz
First working version of a whole-camera-setup.
00:02 Changeset [12434] by tbretz
Implemented starting of the rate control.
00:00 Changeset [12433] by tbretz
Allow SET_THRESHOLD also in state configured to allow the ratecontrol to adapt the rates.
00:00 Changeset [12432] by tbretz
Implemented correct rate control states.

11/06/11:

19:22 Changeset [12431] by lyard
added an extra safety check when removing services
18:32 Changeset [12430] by lyard
added writing of separate TM channels
18:10 Changeset [12429] by tbretz
Added many more options and the possibility to control the global camera rate.
18:09 Changeset [12428] by tbretz
Added the controlling of the rate control.
18:09 Changeset [12427] by tbretz
Added rate control.
17:21 Changeset [12426] by lyard
removed cout
17:05 Changeset [12425] by lyard
updated viewer
17:04 Changeset [12424] by lyard
updated viewer
03:03 Changeset [12423] by tbretz
Fixed some missing STL includes.
02:43 Changeset [12422] by lyard
fixed the fix of the fix
02:41 Changeset [12421] by tbretz
Do not throw an exception if a server is deleted which is not in the list.
02:39 Changeset [12420] by lyard
fixed the fix
02:33 Changeset [12419] by lyard
changed closing behaviour of corrupted files
02:30 Changeset [12418] by tbretz
Print a proper error message if rename() fails.
02:15 Changeset [12417] by tbretz
Send a last current update request after the calibration is finished to make sure the gui gets an update.
02:15 Changeset [12416] by tbretz
Stop the event update when the fEventStop is checked; enable the Calibrate button in the feedback tab only in its allowed state.
02:14 Changeset [12415] by tbretz
Added the fFeedbackCalibrate button.
02:12 Changeset [12414] by tbretz
Some simplifications; Added the Calibration button in the Feedback tab; Enabled the Stop button in the Events tab
02:10 Changeset [12413] by lyard
fixed a bug when detecting corrupted files
01:00 Changeset [12412] by tbretz
Changed the coordinates such that the camera turns around its center not around pixel 0

11/05/11:

21:55 Changeset [12411] by tbretz
Added new run-types
21:47 Changeset [12410] by lyard
added correct Rois extraction to event builder
21:39 Changeset [12409] by lyard
added PixelMap to sources of viewer
21:31 Changeset [12408] by lyard
removed debug messaged
21:17 Changeset [12407] by tbretz
Fixed the group() memeber function
21:16 Changeset [12406] by tbretz
Added the bias supply calibration coming from the feedback to the gui
21:14 Changeset [12405] by tbretz
Replaced START_RUN by START_TRIGGER
21:13 Changeset [12404] by tbretz
Fixed the run-times in minutes
21:13 Changeset [12403] by tbretz
Replaced START_RUN by START_TRIGGER
21:12 Changeset [12402] by tbretz
Replaced START_RUN by START_TRIGGER
21:12 Changeset [12401] by tbretz
Fixed the verbose screen output
21:12 Changeset [12400] by tbretz
Replaced START_RUN and STOP_RUN by START_TRIGFGER and STOP_TRIGGER
21:04 Changeset [12399] by tbretz
Added the possibility to calibrate the offset of the currents of the bias supply
21:03 Changeset [12398] by tbretz
Fixed so that all ROI of all ch9 are set correctly.
20:34 Changeset [12397] by lyard
turned camera
20:30 Changeset [12396] by lyard
turned camera
19:43 Changeset [12395] by lyard
added separate TM display, and remove TMs from RMS calculation
17:43 Changeset [12394] by tbretz
Fixed the clearing of the rate-scan display
13:36 Changeset [12393] by neise
removed typos and unused varaibles
13:32 Changeset [12392] by neise
tidied up tpeak.C and put an entry into README.txt
10:53 Changeset [12391] by neise
initial commit of flightpulser.C with an additional method in zerosearch.C and an entry in README.txt

11/04/11:

23:59 Changeset [12390] by lyard
fixed various things with the viewer
22:34 Changeset [12389] by neise
short description of gainfit.C
22:28 Changeset [12388] by neise
initial commit gainfit.C see README.txt
21:38 Changeset [12387] by neise
added entry for fpeak_cfd.C ... gainfit will follow soon
21:28 Changeset [12386] by neise
deleted
21:26 Changeset [12385] by neise
corrected typo in filename
21:23 Changeset [12384] by neise
adjusted to the changes in DrsCalibration.C and zerosearch.C
21:22 Changeset [12383] by neise
Now the first 12 and the last 12 slices wil be removed from Ameas
21:21 Changeset [12382] by neise
changed name of function, which removes Region, where the Maximum is found near the edge of the Region ... this most probably is not a real peak.
20:25 Changeset [12381] by neise
adjusted to the new OpenDataFile() method
20:20 Changeset [12380] by neise
garbage collection; deleted intermediate vector NextNeighbors; TODO how to check if everything is still alright?
20:18 Changeset [12379] by neise
moved spike removal out of this file
19:58 Changeset [12378] by neise
moved SpikeRemoval methods into dedicated files
19:14 Changeset [12377] by tbretz
Fixed a command description and improved some log message.
19:12 Changeset [12376] by tbretz
Removed the fFadLedRoi
19:12 Changeset [12375] by tbretz
Removed the obsolete fFadLedRoi and enabled the widet which allows setting the roi for ch9
19:06 Changeset [12374] by tbretz
Set the region of interest for channel 9 in addition, enabled the RoiCh9 controls.
19:03 Changeset [12373] by tbretz
Changed name of pixel map for the time being.
17:30 Changeset [12372] by lyard
implemented chunk allocation of memory. Not optimal yet, but at least fadctrl uses one the amount it is supposed to use
15:12 Changeset [12371] by neise
produces TH2F with an amplitude spektrum for all pixels
13:06 Changeset [12370] by neise
added method to remove peaks, which sit on a falling edge of another peak
12:45 Changeset [12369] by neise
cleaned up a bit ...still needs testing
12:44 Changeset [12368] by neise
added another Function to open a Datafile ... see example use in fpeak_cfd.C
12:43 Changeset [12367] by neise
drs calibration function 'getValue()' of Werner and another implementation

11/03/11:

13:58 Changeset [12366] by Jens Buss
This a modified Version of dNeises fpeak, which produces a overlay-histogram of all darkcount-peaks

11/02/11:

15:58 Changeset [12365] by kraehenb
More comments in calscope_batch, and exclude spikes in the peakfinderscope.
15:19 Changeset [12364] by kraehenb
New version which is easier to use (by first getting the full calibrated event with FCalibrateEvent). Unfortunately a bit slower...
14:45 Changeset [12363] by kraehenb
This program plots all calibrated events of a file when pressing ENTER to continue, a to abort.
13:50 Changeset [12362] by kraehenb
New version of the calscope-script which is easier to adapt. The included file TPKplotevent was dropped for the FCalibrateEvent.C, which takes an event and returns an array with the DRS-calibrated pipeline.
12:43 Changeset [12361] by Daniela Dorner
added zipscript, changed paths for rsync
05:35 Changeset [12360] by tbretz
Do not check if waiting for answer in ExpertReste if this is a OC reset
05:34 Changeset [12359] by tbretz
Added DRIVE_CONTROL led
05:34 Changeset [12358] by tbretz
Simplified fad tab; added drive led

11/01/11:

15:46 Changeset [12357] by neise
starting point for gain fit
14:59 Changeset [12356] by neise
adjusted fbsl for ISDC cluster .. I basically renamed a few variables and generally tidied up a bit ... not sure what actually helped... maybe its still not solved.
04:36 Changeset [12355] by tbretz
04:35 Changeset [12354] by tbretz
Added ratecontrol.

10/31/11:

21:25 Changeset [12353] by tbretz
Removed an obsolete comment block
20:00 Changeset [12352] by tbretz
Adapted output of filenames.
19:02 Changeset [12351] by tbretz
Set some fixed control loop parameters as determined in Zurich; output also the state of the FSC
18:56 Changeset [12350] by tbretz
Do directly set the new reference in SetReference.
18:55 Changeset [12349] by tbretz
Removed the warning in case of double delete... so far no problems weere encountered.
18:53 Changeset [12348] by tbretz
Use the connection to the DNS as the IP address to get the Local IP.
18:53 Changeset [12347] by tbretz
Make the FEEDBACK receive the data all the time for a combined control of temp and amplitude
18:52 Changeset [12346] by tbretz
Do not use statvfs in SetCurrentFolder.
18:51 Changeset [12345] by tbretz
Display N/40 in decimal
17:41 Changeset [12344] by tbretz
Removed obsolete DataCalib.h and DataCalib.cc from viewer.
14:52 Changeset [12343] by tbretz
Moved some common code between MARS and FACT++ to DrsCalib.h as new class DrsCalibration; renamed CalibData to DrsCalibrate.
02:07 Changeset [12342] by tbretz
Improved output; removed obsolste ?: operators.
00:11 Changeset [12341] by tbretz
Fixed tha calculation of the average ethernet rate; removed min and max and removed the obsolete widgets from the Event builder tab.
00:10 Changeset [12340] by tbretz
Unified FAD and EvtBuilder tab as much as possible.
00:01 Changeset [12339] by tbretz
Renamed default pixel map file.

10/30/11:

23:56 Changeset [12338] by tbretz
Renamed option ramp-time to ramp-delay
23:29 Changeset [12337] by tbretz
Removed stray debug output.
22:38 Changeset [12336] by tbretz
For the time being go back to idle when a new run was successfully started.
22:36 Changeset [12335] by tbretz
Improved class reference.
22:36 Changeset [12334] by tbretz
Renamed kTakingData to kTriggerOn
22:35 Changeset [12333] by tbretz
Added GetNumFilesOpen and IncreaseRunNumber.
22:34 Changeset [12332] by tbretz
Replaced kTakingData by kTriggerOn
22:34 Changeset [12331] by tbretz
Added the state kWritingData and avoid that run-numbers can be decreased manually.
22:33 Changeset [12330] by tbretz
Added state kWritingData.
22:32 Changeset [12329] by tbretz
Changed the 'define all' and 'define err' in a way that it is less disturbing
22:31 Changeset [12328] by tbretz
Renamed FTM::kTakingData to FTM::kTriggerOn
03:43 Changeset [12327] by tbretz
replaces PCTime by UnixTimeUTC
03:41 Changeset [12326] by tbretz
Removed comments; replaced code in Apply by ApplyCh; fixed the problem that the DRS calibration data was assumed to be of size roi/ch instead of 1024/ch

10/29/11:

22:31 Changeset [12325] by tbretz
Show VoltageOff as a red bar in the status LED
21:48 Changeset [12324] by tbretz
Fixed some litle stuff in the new ratescan tab.
21:37 Changeset [12323] by tbretz
Added the possibility to change the step size and maximum during a ratescan.
20:57 Changeset [12322] by tbretz
Allow eversything in fact++.rc

10/28/11:

22:23 Changeset [12321] by Daniela Dorner
adapted paths for raw and aux data
21:49 Changeset [12320] by tbretz
Do not set negative axis ranges in handleRateScan.
21:45 Changeset [12319] by tbretz
Switch control off when voltage off.
20:28 Changeset [12318] by Daniela Dorner
updated ldaphost
20:24 Changeset [12317] by Daniela Dorner
bugfix for updating string
19:58 Changeset [12316] by tbretz
Removed invalid characters from Dim descriptions
19:58 Changeset [12315] by tbretz
Make sure that the default option gets touched even it is finally not needed.
19:57 Changeset [12314] by tbretz
Stop startinga run if datalogger went into error state.
19:56 Changeset [12313] by tbretz
Added an option to disable whole patches. fixed scaling factor in instaniation of Drim TriggerRates.
19:55 Changeset [12312] by tbretz
Fixed a workaround.
19:54 Changeset [12311] by tbretz
Fixed writing of the data.
11:37 Changeset [12310] by lyard
fixed a blur display bug
05:36 Changeset [12309] by tbretz
First woring and tested version.
05:35 Changeset [12308] by tbretz
Added specilized template to make sure we do not have to convert floats to ints

10/27/11:

22:14 Changeset [12307] by neise
added '#define HAVE_ZLIB'
22:04 Changeset [12306] by neise
added removeMaximaAbove method
21:36 Changeset [12305] by neise
adjusted use of zerosearch() method ... this method doesn't return ints anymore, but struct Region see Region.h
21:35 Changeset [12304] by neise
added symmetric sliding average filter
17:10 Changeset [12303] by kraehenb
Save spectra of gainanalysis to the file gainspectra.root.
16:45 Changeset [12302] by lyard
added clean destruction of qwt objects
16:35 Changeset [12301] by lyard
moved double click to single click
16:30 Changeset [12300] by lyard
added RMS tab and fixed time for old format
16:07 Changeset [12299] by kraehenb
Include #define HAVE_ZLIB for compressed data files.
16:00 Changeset [12298] by lusterma
added fbsl.C ...extract baseline data
14:42 Changeset [12297] by lyard
added RMS tab
13:20 Changeset [12296] by Daniela Dorner
added cron to rsync auxiliary and rawdata
04:59 Changeset [12295] by tbretz
Addec code for the rate scan tab display
04:59 Changeset [12294] by tbretz
Added sending of Dim services.
04:58 Changeset [12293] by tbretz
Added controls for rate scan tab.
04:58 Changeset [12292] by tbretz
Added tab for RateScans
01:21 Changeset [12291] by tbretz
Use new features of trigger rate service.
00:20 Changeset [12290] by tbretz
Included EnablePatch and a default constructor for the trigger rates.
00:11 Changeset [12289] by tbretz
Store trigger rates for later display

10/26/11:

23:23 Changeset [12288] by tbretz
Addec ontrols for N/4
23:20 Changeset [12287] by tbretz
Adapted format string for TRIGGER_RATES
23:19 Changeset [12286] by tbretz
Fixed a misspelled class name.
23:19 Changeset [12285] by tbretz
Removed stray debug output.
23:03 Changeset [12284] by tbretz
Added elapsed time and on time to DrimTriggerRate
23:01 Changeset [12283] by tbretz
Display N/4 logic threshold
23:00 Changeset [12282] by tbretz
Added some N/4 controls
19:44 Changeset [12281] by tbretz
Added the most simple spike removal to the display -- sould be possible to switch it off.
19:43 Changeset [12280] by tbretz
Added the most simple spike removal before the statistics for the eventdisplay (maxima, etc) are calculated.
19:42 Changeset [12279] by tbretz
Added some more output in case the previous answer was not yet recived; reset the ramping state when a new connection was established; do not reset voltages if we were previously connected.
19:41 Changeset [12278] by tbretz
Added a very simple spike removal algorithm.
11:41 Changeset [12277] by lyard
fixed the handling of columns names in the datalogger
11:00 Changeset [12276] by kraehenb
Moved declaration of parread_tmp to the other declarations of read parameters of the fit.
10:53 Changeset [12275] by kraehenb
Added more comments. Questions please to tpk@phys.ethz.ch.

10/25/11:

21:33 Changeset [12274] by tbretz
Allow that UnixTimeUTC is missing.
21:32 Changeset [12273] by tbretz
Implemented feedback controls
20:06 Changeset [12272] by tbretz
Exchanged some values whcih were obviously exhanged
19:59 Changeset [12271] by tbretz
Added the possibility to apply a global offset to the temperature controlled feedback values
19:51 Changeset [12270] by tbretz
Added the possibility to switch off the update interval.
19:50 Changeset [12269] by tbretz
Fixed wiritng the fits header.
19:49 Changeset [12268] by tbretz
Fixed the output in the txt-file.
19:49 Changeset [12267] by tbretz
Replaced the int16_t for dac by a uint16_t
19:48 Changeset [12266] by tbretz
Disabled some broken sensor widgets by default
14:03 Changeset [12265] by neise
removed needless include statement
14:02 Changeset [12264] by neise
whitespaces
14:02 Changeset [12263] by neise
a better example than fpeak_discri.C ... at least I hope so
13:55 Changeset [12262] by neise
makes use of the new discriminators
13:53 Changeset [12261] by neise
whitespaces only
13:52 Changeset [12260] by neise
I case you want to see real raw data
13:52 Changeset [12259] by neise
discriminator does now return vector<Region>
13:51 Changeset [12258] by neise
zerosearch does now return vector<Region>
13:50 Changeset [12257] by neise
vector<Region> are returned by most of my discriminators
13:50 Changeset [12256] by neise
added zipped fits file support
13:49 Changeset [12255] by neise
i know its wrong ... but i can't work without these files...
Note: See TracTimeline for information about the timeline view.