Timeline
04/03/12:
- 11:47 Changeset [13299] by
- removed debug print out
- 11:46 Changeset [13298] by
- made a real example out of it ... should be comprehendable and working now
- 10:30 Changeset [13297] by
- ignore QoS of messages in log file
- 09:40 Changeset [13296] by
- added datalogger prefix to datalogger log messages
04/02/12:
- 13:48 Changeset [13295] by
- Removed an obsolete const-cast.
03/30/12:
- 22:29 Changeset [13294] by
- Added an automatic reconnect under certain conditions.
- 18:07 Changeset [13293] by
- fixed path
- 18:00 Changeset [13292] by
- added nice and ionice for processes working with data
- 17:58 Changeset [13291] by
- added nice and ionice for processes working with data
03/29/12:
- 18:20 Changeset [13290] by
- can be used for profiling
- 11:15 Changeset [13289] by
- added DriveFileAvailISDC and changed requirement for Star from AuxFilesAvailISDC to DriveFileAvailISDC
- 11:14 Changeset [13288] by
- added (script to check availability of DRIVE_CONTROL_TRACKING_POSITION.fits)
- 11:09 Changeset [13287] by
- added nightly insert for new table DriveFileAvailISDCStatus
- 10:28 Changeset [13286] by
- Changed # to be a real comment and > to be a comment writting to the log-files.
- 10:03 Changeset [13285] by
- give only warning if files older than some days are missing
- 10:02 Changeset [13284] by
- fixed typo
- 10:02 Changeset [13283] by
- run CheckStatus.sh only twice a day
- 10:01 Changeset [13282] by
- added jobmanager and SGE environment
- 09:59 Changeset [13281] by
- fixed typo
- 07:19 Changeset [13280] by
- changed that within the script <IsReadyForDataTaking> is called from the subfolder ServiceScripts
- 07:09 Changeset [13279] by
- small bugfix
- 07:09 Changeset [13278] by
- small bugfix
- 06:27 Changeset [13277] by
- changed that within the script <IsReadyForDataTaking> is called from the subfolder ServiceScripts
- 06:27 Changeset [13276] by
- changed that within the script <IsReadyForDataTaking> is called from the subfolder ServiceScripts
- 06:09 Changeset [13275] by
- deleted TestMrkTracking from svn cause it was exidentally added
- 06:07 Changeset [13274] by
- deleted TestCrabTracking from svn cause it was exidentally added
- 05:48 Changeset [13273] by
- exchanged <echo> output command against <#> output
- 05:47 Changeset [13272] by
- exchanged <echo> output command against <#> output
- 05:47 Changeset [13271] by
- exchanged <echo> output command against <#> output
- 05:46 Changeset [13270] by
- exchanged <echo> output command against <#> output
- 05:46 Changeset [13269] by
- exchanged <echo> output command against <#> output
- 05:34 Changeset [13268] by
- some comment edits
- 05:32 Changeset [13267] by
- check statuses of bias, feedback, fad and drive before starting a data run
- 05:29 Changeset [13266] by
- additional mini scripts to tidy up the data taking scripts
- 05:12 Changeset [13265] by
- some spellchecking in the comments
- 05:11 Changeset [13264] by
- some spellchecking in the comments
- 04:59 Changeset [13263] by
- some changes in the commenmts
- 04:55 Changeset [13262] by
- changed position of reminder for opereator to measure sky brightness
- 04:50 Changeset [13261] by
- added commenmts for new log comments
- 04:48 Changeset [13260] by
- added commenmts for new log comments, still echos in script, will delete when all scripts are ready
03/28/12:
- 23:14 Changeset [13259] by
- Set fDebugTx per default to false
- 21:38 Changeset [13258] by
- Ensure that after a successfull overcurrent reset at least one status request is send.
- 21:14 Changeset [13257] by
- Changed the description for the exit command.
- 20:51 Changeset [13256] by
- Set names for the dim services.
- 20:50 Changeset [13255] by
- Changed the resistance of the broken pixels to 390Ohm. Test yesterday night have shown that the amplitude is too low.
- 20:48 Changeset [13254] by
- Removed the stray Xs in the dim service names which were for debugging.
- 20:20 Changeset [13253] by
- 13:23 Changeset [13252] by
- Fixed a typo.
03/27/12:
- 23:11 Changeset [13251] by
- Encapsulated the waiting for a state into proper switching off and on of the output stream buffer.
- 20:56 Changeset [13250] by
- just a test
- 11:19 Changeset [13249] by
- Fixed the 'broken pixel' correction. The voltage was devided by the correction instead of multiplied.
- 10:31 Changeset [13248] by
- Plot the results of a ratescan from a slow control file.
- 10:06 Changeset [13247] by
- Load iomanip per default.
- 09:50 Changeset [13246] by
- deleted pyfact.py testing version, did not belong in svn
- 09:24 Changeset [13245] by
- new version ... with Feeder and Anaylsis .. do not use
- 00:00 Changeset [13244] by
- log output alignment
- 00:00 Changeset [13243] by
- log output alignment
03/26/12:
- 22:57 Changeset [13242] by
- Updated some log-output.
- 22:56 Changeset [13241] by
- Added another sanity check for the output.
- 22:04 Changeset [13240] by
- Added a sanity check for the new output
- 22:03 Changeset [13239] by
- Propagate G-APD bias offset and set-point seperately.
- 22:02 Changeset [13238] by
- Updated to new biasctrl commands; removed some obsolete endl; reduced the resistance for the broken pixels' patches
- 22:01 Changeset [13237] by
- Updated to fit the new biasctrl command and services.
- 22:01 Changeset [13236] by
- Changed the code in a way that now it operates on floating point values rather than dac counts and only converts to dac counts as last step. This also enables that the bias crate calibration offset is now separated from the set-value and the displayed value in the gui should be the actual output value of the crate.
- 16:10 Changeset [13235] by
- Decreased the serial resistance from 1150 Ohm to 1100 Ohm; fixed a typo in a variable name; added some debug out for the voltage offsets; added a workaround for the three patches with the broken pixel
- 15:51 Changeset [13234] by
- commented out every plotting stuff, so I can use it at ISDC without X
- 15:50 Changeset [13233] by
- moved matplotlib import statement to __main__, so it is only imported, when needed
- 15:50 Changeset [13232] by
- moved matplotlib import statement to __main__, so it is only imported, when needed
- 15:49 Changeset [13231] by
- using math module instead of pylab ...
- 15:48 Changeset [13230] by
- moved matplotlib import statement to __main__, so it is only imported, when needed
- 13:32 Changeset [13229] by
- still testing
- 13:30 Changeset [13228] by
- changes as discussed with werner ... not executable anymore
- 13:29 Changeset [13227] by
- evolving to the next level
- 11:29 Changeset [13226] by
- corrected typo
- 09:06 Changeset [13225] by
- Do not read more than the expected number of rows per default.
- 08:48 Changeset [13224] by
- Made the number of requests during calibration an option.
- 08:47 Changeset [13223] by
- Unintentionally changed the allowed states for TRACK_SOURCE with the last commit
- 08:46 Changeset [13222] by
- Replaced W format by C for TRACK_SOURCE
- 08:46 Changeset [13221] by
- Added TrimQuotes
- 08:45 Changeset [13220] by
- Improved debugging output.
- 05:17 Changeset [13219] by
- changed waiting time before track command
- 03:00 Changeset [13218] by
- added check if bias, feedback, drive and fad are in the correct state to write data
03/24/12:
- 22:23 Changeset [13217] by
- Some improved debug output.
- 22:23 Changeset [13216] by
- Updated some FITS descriptions.
- 04:10 Changeset [13215] by
- short script to check if bias, feedback, drive and fad are in the correct state to write data
- 04:08 Changeset [13214] by
- added check before data run to assure that bias, feedback, drive and fad are in the correct state
- 04:08 Changeset [13213] by
- added check before data run to assure that bias, feedback, drive and fad are in the correct state
03/23/12:
- 22:32 Changeset [13212] by
- Updated state names.
- 22:17 Changeset [13211] by
- Improves state handling.
- 22:09 Changeset [13210] by
- Removed all the unnecessary log-messages.
- 22:08 Changeset [13209] by
- Implemented fVerbose to switch verbosity of default messages on and off.
- 16:00 Changeset [13208] by
- Write comments as such.
- 15:59 Changeset [13207] by
- Addeda new log-class: comments
- 15:59 Changeset [13206] by
- Pipe comments to the log-file; added the missing jump label.
- 14:50 Changeset [13205] by
- added fence from prevent column desc of messages services
- 14:26 Changeset [13204] by
- added output to see which service creates column warning
- 13:48 Changeset [13203] by
- Updated the options.
- 13:45 Changeset [13202] by
- Updated the help text.
- 12:05 Changeset [13201] by
- Made DebugTx optional.
- 12:05 Changeset [13200] by
- Use Debug() when fDebugTx is enabled.
- 11:57 Changeset [13199] by
- Replaced wind direction by human readable strings.
- 11:44 Changeset [13198] by
- Replace degree value for wind direction with human readable value
- 11:33 Changeset [13197] by
- Shortened some dim descriptions.
- 11:31 Changeset [13196] by
- Shortened some dim descriptions.
- 11:28 Changeset [13195] by
- Shortened descriptions to make the datalogger more happy.
- 11:21 Changeset [13194] by
- Updated some dim descriptions; suppress unecessary output by default.
- 11:13 Changeset [13193] by
- Print AddService info only when it is really a service.
- 11:06 Changeset [13192] by
- Some improvement to header evaluation.
- 10:22 Changeset [13191] by
- Changed the default interval from 55s to 25s. Made it an option.
- 09:08 Changeset [13190] by
- Propagate max number of events and time correctly as signed int.
- 09:01 Changeset [13189] by
- Delay setting new volatges during current requests.
- 04:57 Changeset [13188] by
- changed the output
- 04:56 Changeset [13187] by
- changed the output
- 04:06 Changeset [13186] by
- resume data taking after it had to be aborted during first run of four
- 02:08 Changeset [13185] by
- spell check
- 02:07 Changeset [13184] by
- Script for Crab data taking, that automatically takes both wobble positions and sents the necessary commands to drivectrl
- 01:58 Changeset [13183] by
- changed the time waited before sending commands to drivectrl
03/22/12:
- 21:19 Changeset [13182] by
- included calculation of some more hillas parameters, still no unit tests ... no clear structure, but there is an example script in examples/hillas_test.py
- 21:17 Changeset [13181] by
- added member, which contains numpy arrays instead of Vector2 objects. this class needs reworking! It is simply ugly
- 21:15 Changeset [13180] by
- test functions are using Plotter class, and SignalGenerator class in order to produce test vectors, before they were doing that themselves.
- 21:02 Changeset [13179] by
- Updated help text for '.s'
- 21:01 Changeset [13178] by
- Send current requests in current control mode only when voltage is switched on.
- 21:01 Changeset [13177] by
- initial commit of a script using the pyafact/image_extractors ...
- 21:00 Changeset [13176] by
- changed pyfact_rename to pyfact and switched on the tabulator checking
- 20:41 Changeset [13175] by
- introduced calculation of number of islands, but I did not want to change the return value, maybe I should return a dict as well ...
- 20:38 Changeset [13174] by
- Plotter was not correctly plotting the grid, introduced the plotting of the grid into the __call__ now it works
- 16:57 Changeset [13173] by
- added (script to build sequences)
- 16:56 Changeset [13172] by
- added (crontab file for fact_opr on isdc-viewer00)
- 16:55 Changeset [13171] by
- improved output, fixed bugs
- 15:01 Changeset [13170] by
- Added checks for the consistency of the event and trigger number.
- 14:56 Changeset [13169] by
- Improved some debug output, removed obsolete SetMode; commented out some old debug output.
- 14:52 Changeset [13168] by
- Implemented a function for word wraping
- 14:51 Changeset [13167] by
- Moved read to cc file; implemented first version of a database interface.
- 11:14 Changeset [13166] by
- Make sure that the connection is the last in the configuration; improved sanity checks in Track()
- 11:04 Changeset [13165] by
- Added some improved output.
- 10:21 Changeset [13164] by
- Implemented new command to set all offsets individually (for current control)
- 10:19 Changeset [13163] by
- Replaces all 416 by kNumChannels; send the correct command to set the correct offset for all channels individually in current control.
- 07:06 Changeset [13162] by
- DimScript for data taking, that only takes the 4 5min data runs, can be used if DataTaking1/2 crashed at beginning of data tacking
- 07:04 Changeset [13161] by
- DimScript for data taking MRK421, that automatically takes both wobble positions and sents the necessary commands to drivectrl
03/21/12:
- 14:33 Changeset [13160] by
- Some clean up to the commands.
- 14:22 Changeset [13159] by
- Assume that an empty folder name means '.'
- 13:50 Changeset [13158] by
- added insert to nightly status tables, removed insert for status tables for runs (done with mysql trigger now)
03/20/12:
- 14:37 Changeset [13157] by
- FSC resistances converted into temperature for online display
- 09:27 Changeset [13156] by
- new interface of next(), and hence a new option in the __init__() methon ... old interface is considered depricated
- 09:09 Changeset [13155] by
- debugged DRs amplitude calibration. tom must not be rolled
03/19/12:
- 17:20 Changeset [13154] by
- added (script to check status of transfer for deleting data)
- 17:09 Changeset [13153] by
- treat case that file is not yet there
- 17:09 Changeset [13152] by
- bugfix for drsfiles
- 16:36 Changeset [13151] by
- added doc; this is just an example, nothing ready, to be adapted to work at ISDC, I just made this some time ago on my Laptop
- 11:56 Changeset [13150] by
- enabled tab checking and excahnged python_rename with python
- 11:55 Changeset [13149] by
- enabled tab checking and excahnged python_rename with python
- 11:54 Changeset [13148] by
- enabled tab checking and excahnged python_rename with python
- 11:52 Changeset [13147] by
- enabled tab checking and excahnged python_rename with python
- 11:51 Changeset [13146] by
- enabled tab checking and excahnged python_rename with python
- 11:49 Changeset [13145] by
- exchanged pyfact_rename by pyfact and enabled tab checking. removed some tabs as well
- 11:45 Changeset [13144] by
- enables tab checking and exchanged pyfact_rename by pyfact
- 11:41 Changeset [13143] by
- included python -tt option. thus checking for tabs/spaces
- 11:34 Changeset [13142] by
- included tab checking, and substituded all tabs by spaces
- 11:32 Changeset [13141] by
- moved newer pyfact_rename.py to pyfact.py ... keeping its history hopefully
- 11:31 Changeset [13140] by
- deletet depricated pyfact.py
- 11:31 Changeset [13139] by
- debugged two lines
- 08:26 Changeset [13138] by
- Implemented request of current sttaus during current feedback once in a second to ensure a good average.
03/18/12:
- 22:59 Changeset [13137] by
- Ensure that the calibration starts now that the biasctrl doesn't sent a voltage set request (which would return the currents) anymore when the voltage is already set.
- 21:55 Changeset [13136] by
- Made sure that the first automatic status request at connection also happens when the automatic updates are switched off; do not send a voltage set command when the voltages are already set.
- 20:53 Changeset [13135] by
- Updated to v19r30
03/16/12:
- 12:57 Changeset [13134] by
- Added a warning message to help debugging.
- 09:01 Changeset [13133] by
- added new member Coordinator.chid2vec, which is the same as chid2coor, but contains euclid.Vector2 instead of tuples
- 08:58 Changeset [13132] by
- moved tests out of __main__ into dedicated _test_funcs(), so making __main__ smaller and easier to comprehend
- 08:56 Changeset [13131] by
- NOTE: included use of ImageExtractor classes, not yet testet
- 08:54 Changeset [13130] by
- initial commit of Image Parameter Extractor classes ... only the upper two are working. No _test_funcs() ... no callback funcs ... a lot of work to do
- 08:52 Changeset [13129] by
- moved _test_SimplePlotter() down in the file
- 08:51 Changeset [13128] by
- just a text, to be refined during and after the course
- 01:12 Changeset [13127] by
- added a sanity check for fadctrl being in state connected before writing any data
- 01:12 Changeset [13126] by
- added a sanity check for fadctrl being in state connected before writing any data
- 01:08 Changeset [13125] by
- with this one can do the Amplitude Calibration for ROI 300
03/15/12:
- 22:38 Changeset [13124] by
- pyfact made identical to pyfact_rename.py
- 21:44 Changeset [13123] by
- call back of pyfact drs calibration
- 21:43 Changeset [13122] by
- tiny modifications - still not final
- 21:41 Changeset [13121] by
- bug fix in drs calibration
- 13:57 Changeset [13120] by
- tidied up a bit. moved examples to examples and deleted scripts, I never used anymore
- 13:56 Changeset [13119] by
- debugged return value of AmplitudeCleaner in case of return_bool_mask=False, was tuple of list, is now list
- 13:43 Changeset [13118] by
- included Plotter-class from depricated plotter.py-module with name SimplePlotter
- 09:51 Changeset [13117] by
- gDirectory->GetListOfKeys() can be NULL... fixed.
- 09:27 Changeset [13116] by
- Do only request the status if the voltage is on; get some dummy reports for the currents before starting to calibrate; do not allow negative feedback corrections
- 08:54 Changeset [13115] by
- moved EXTNAME keyword further down for compatibility with fverify
- 00:02 Changeset [13114] by
- added some examples
03/14/12:
- 23:56 Changeset [13113] by
- initial commit of first thoughts about how to collect anaysis results
- 22:17 Changeset [13112] by
- incl 45sec wait for current control
- 22:14 Changeset [13111] by
- incl. 45sec wait after bias ramped up
- 21:19 Changeset [13110] by
- complete rework, based on comments of TB
- 19:27 Changeset [13109] by
- Removed default for device address; only connect automatically if device address given.
- 19:26 Changeset [13108] by
- added check if directory exists
- 19:25 Changeset [13107] by
- added tmp path for rsyn
- 17:24 Changeset [13106] by
- tiny correction
- 16:53 Changeset [13105] by
- added plot3.py, look at single DRS pipeline data + spike filter
- 16:53 Changeset [13104] by
- added a comment
- 16:51 Changeset [13103] by
- added some comments
- 15:02 Changeset [13102] by
- UNTESTED: example script using the AmplitudeCleaner, for calculating area vs log(size), compare to begin.py
- 15:00 Changeset [13101] by
- initial commit of class AmplitudeCleaner
- 14:59 Changeset [13100] by
- debugged handling of boolean masks in CamPlotter
- 10:12 Changeset [13099] by
- run CheckStatus.sh more often
- 09:59 Changeset [13098] by
- adapted time for one job
- 09:58 Changeset [13097] by
- removed not needed lines
- 09:08 Changeset [13096] by
- modified working version - not finished
- 09:07 Changeset [13095] by
- modified class hist for more compatibility with ROOT
- 09:03 Changeset [13094] by
- improved logging
- 09:03 Changeset [13093] by
- added drs file to transfer
- 08:49 Changeset [13092] by
- removed useless annoying outputs
03/13/12:
- 20:38 Changeset [13091] by
- Fixed the averaging implemented yest for more verbose output
- 19:34 Changeset [13090] by
- debugged CamPlotter class ... wrong identation as some point
- 19:33 Changeset [13089] by
- the same hack as in plotters was included, in order to ensure, that the map_dn.txt file is found
- 19:19 Changeset [13088] by
- running version - produces area vs log(size) plot
- 18:26 Changeset [13087] by
- changes TEMP_CONTROL to CURRENT_CONTROL
- 18:07 Changeset [13086] by
- intitial commit of fb_ped_n_lp
- 18:06 Changeset [13085] by
- intitial commit of fb_data
- 18:06 Changeset [13084] by
- intitial commit of fb_on
- 15:07 Changeset [13083] by
- added more verbosity
- 14:49 Changeset [13082] by
- added drs-files to rsync and check for existance of links
- 12:00 Changeset [13081] by
- initial commit of cleaning ...
- 12:00 Changeset [13080] by
- made CamPlotter smarter, can now handle data, and masks
- 11:19 Changeset [13079] by
- extra log file for merpp
- 10:48 Changeset [13078] by
- Added th possibility to use a real regular expression.
03/12/12:
- 18:10 Changeset [13077] by
- initial commit of script calculating the number of events, which would have been triggered.... very simple assumptions
- 16:34 Changeset [13076] by
- added function __add__ to RawData. one can now jump over a certain amout of events, by doing: e.g. run=run+34
- 16:34 Changeset [13075] by
- added readout of the FAD trigger time out of the raw data. RawData.board_times contains this information.
- 16:32 Changeset [13074] by
- solved an issue with CamPlotter, when calling it from a different folder. maybe this was not yet fully understood by me. And plotting histograms without a labe is now possible
- 16:29 Changeset [13073] by
- initial commit of python script for baseline jump studies
- 12:39 Changeset [13072] by
- example for sabrina
- 12:37 Changeset [13071] by
- Set the bias create resistor to 1150 Ohm which (according to the measurements of last night) seem to be a good compromise to include also cables, etc; added some more informative output to the Info
- 08:20 Changeset [13070] by
- Do not send current request in HandleCalibration when still ramping.
03/11/12:
- 20:04 Changeset [13069] by
- Replaced SET_CHANNEL_DAC by SET_GLOBAL_DAC; adapted FFEDBACK state number to new state number.
- 20:00 Changeset [13068] by
- Removed some old debug output when commands are issued.
- 17:41 Changeset [13067] by
- added new monitoring script
- 17:24 Changeset [13066] by
- added new monitoring scripts
- 17:10 Changeset [13065] by
- added temp directory for rsync
- 17:09 Changeset [13064] by
- added (script to check database for failed and crashed jobs)
- 17:08 Changeset [13063] by
- added (script to check global logfile for errors and warnings)
- 13:29 Changeset [13062] by
- Updated the resistors. We have now 3900Ohm at the G-APD, 1kOhm serial resistor; 1kOhm in the bias crate; 100Ohm measurement resistor in the bias crate.
- 13:11 Changeset [13061] by
- Adapted to changed in feedback states; skip start values from feedback
- 13:10 Changeset [13060] by
- Implemented the possibility of a current feedback which corrects the applied voltage according to the measured currents.
03/10/12:
- 00:17 Changeset [13059] by
- adapted paths
03/09/12:
- 23:32 Changeset [13058] by
- 23:31 Changeset [13057] by
- added priority to status queries
- 22:58 Changeset [13056] by
- adapted paths in crontab files
- 22:27 Changeset [13055] by
- adapted scripts to changes in directory structure
- 22:18 Changeset [13054] by
- reworked version of scripts doing backup to Wuerzburg
- 22:15 Changeset [13053] by
- added (scripts for transfer from LP to ISDC)
- 22:13 Changeset [13052] by
- added (setup file for processing in La Palma)
- 22:12 Changeset [13051] by
- added (setup files for processing at ISDC)
- 22:11 Changeset [13050] by
- added (jobmanager to run callisto and star on a computing cluster
- 22:09 Changeset [13049] by
- added (scripts for callisto and star)
- 22:08 Changeset [13048] by
- added (scripts to check availability of files)
- 22:04 Changeset [13047] by
- moved db backup script to transfer directory
- 22:03 Changeset [13046] by
- moved rsync scripts to transfer directory
- 22:01 Changeset [13045] by
- moved La Palma rsync scripts to transfer directory
- 21:28 Changeset [13044] by
- added (directory for setup files)
- 21:27 Changeset [13043] by
- moved check scripts to monitoring directory
- 21:23 Changeset [13042] by
- moved to processing directory
- 21:23 Changeset [13041] by
- moved to processing directory
- 21:19 Changeset [13040] by
- moved FillAuxData.sh to processing directory
- 21:18 Changeset [13039] by
- added queries to fill status tables
- 21:12 Changeset [13038] by
- moved zipscript to transfer directory
- 21:11 Changeset [13037] by
- added (directory for monitoring scripts)
- 21:08 Changeset [13036] by
- moved crontab files to cron directory
- 21:07 Changeset [13035] by
- moved crontab files to cron directory
- 21:02 Changeset [13034] by
- added (directory for processing scripts)
- 20:53 Changeset [13033] by
- added (directory for crontab files)
- 20:50 Changeset [13032] by
- added (directory for transfer scripts)
- 20:36 Changeset [13031] by
- Switch on dot by default; fixed the summary output for colorgcc
- 16:49 Changeset [13030] by
- Debugged a few issues like too long comments and a missing check.
- 10:25 Changeset [13029] by
- class somewhere from the internet. used in coor.py for 2D vectors
- 10:23 Changeset [13028] by
- added class WindowIntegrator, which integrate around a give position in a given window
- 10:19 Changeset [13027] by
- in case the length of the filter coeffs is zero, the shape of the return was not ok. now it should be.
- 10:15 Changeset [13026] by
- intitial commit of class that calculates list of NN for each pixel
- 10:13 Changeset [13025] by
- comment translated to engl
- 10:08 Changeset [13024] by
- added checking for input files, before using them :-)
- 10:01 Changeset [13023] by
- initial commit python trigger studies scripts ... you need to put correct pathes in
- 09:39 Changeset [13022] by
- debug: some ROI=1024 was still hardcoded ... using now self.Nbln, self.Ntom and self.Ngm .. which were already defined but not used
- 09:04 Changeset [13021] by
- added callback function
- 09:04 Changeset [13020] by
- added spike_ana.py a simple script using the callback function of DRSSpikes class
03/08/12:
- 16:03 Changeset [13019] by
- updated doc strings
- 15:56 Changeset [13018] by
- more plotters: testable via ./plotters.py
- 12:11 Changeset [13017] by
- example finished
- 12:04 Changeset [13016] by
- added some functions
- 12:01 Changeset [13015] by
- initial commit of a test file
- 11:24 Changeset [13014] by
- bugs fixed, looks o.k., but more detailed testing needed, threshold = 7.
- 11:24 Changeset [13013] by
- pyfact: bugs fixed, looks o.k., but more detailed testing needed, threshold = 7.
- 10:04 Changeset [13012] by
- improved algorithm, now only loops previously defined candidates, now uses all function and sign of the pattern
- 08:30 Changeset [13011] by
- use plt.figure.number instead of UniqueID, class UniqueID removed
03/07/12:
- 20:08 Changeset [13010] by
- Fixed the size of the received magic weather reports.
- 18:51 Changeset [13009] by
- Updated to latest changes.
- 18:49 Changeset [13008] by
- Scale the patch currents to pixle currents.
- 18:48 Changeset [13007] by
- Mini change to the hep output.
- 18:48 Changeset [13006] by
- Reformated the output to make it better fit the help2man conversion.
- 18:47 Changeset [13005] by
- Added some debug options; moved the PrintHelp at a better position so that exceptions wouldn't effect the output.
- 17:47 Changeset [13004] by
- Added new program fitscheck.
- 16:28 Changeset [13003] by
- Improved the possible combinations of how to extract the leading edge or position of maximum and the intgeral or amplitude.
- 16:27 Changeset [13002] by
- Propagate the weight and allow to calculate the difference of two camera.
- 16:25 Changeset [13001] by
- Added AddCamDifference and weights to some Add-functions.
- 14:23 Changeset [13000] by
- Fixed a few shadows of previous local
- 14:22 Changeset [12999] by
- Added DataWriteFits2
- 14:11 Changeset [12998] by
- Added out own FITS streamer to the list of possible file formats (5).
- 14:10 Changeset [12997] by
- Data writer using our own fits streamer class.
- 14:08 Changeset [12996] by
- Added automatic checksum checking.
- 14:08 Changeset [12995] by
- First version of a fits writer.
- 10:17 Changeset [12994] by
- Added the number of events to interpolate to the feedback commands; implemented an exponent of 1./1.6 for the global feedback
03/06/12:
- 22:52 Changeset [12993] by
- Fixed an issue with the console and shell selection.
03/05/12:
- 15:48 Changeset [12992] by
- added plotter.py
03/04/12:
- 09:48 Changeset [12991] by
- Added quality of service to Deviation
- 09:41 Changeset [12990] by
- Added dim service descriptions
Note:
See TracTimeline
for information about the timeline view.
