Timeline
04/19/12:
- 15:26 Changeset [13392] by
- for comparison
- 11:28 Changeset [13391] by
- using map.txt instead of map_dn.txt ... added a lot of comments
- 11:27 Changeset [13390] by
- the same as map_dn.txt but contains only those 3 cols I really use
- 11:23 Changeset [13389] by
- example for root 5.32 on ISDC added
- 09:54 Changeset [13388] by
- Added a possibility to also filla ratio; removed obsolete DrawClone; removed DrawCopy
- 09:53 Changeset [13387] by
- Added fIsRatio; propagate weights; added a possibility to also fill a ratio into a camera histogram.
04/18/12:
- 21:13 Changeset [13386] by
- initial
- 21:12 Changeset [13385] by
- initial
- 21:03 Changeset [13384] by
- DRS amplitude cal optimized. At least I don't see more potential
- 20:36 Changeset [13383] by
- just a test
- 20:00 Changeset [13382] by
- optimizing amplitude_calibration: no np.roll() and moved reshaping to __init__
- 18:15 Changeset [13381] by
- updated to new format of BIAS_CONTROL_VOLTAGE.fits
- 17:07 Changeset [13380] by
- new option in RawData.__init__() one can set do_calibration=False. and the amplitude calibration comes without np.roll() ... thx to TPK for the idea
- 12:08 Changeset [13379] by
- Added decoding for FACT.
- 10:56 Changeset [13378] by
- now one can plot different pulse orders
- 09:28 Changeset [13377] by
- edited typo
- 09:26 Changeset [13376] by
- added some examples, and changed the part about the env vars
- 09:19 Changeset [13375] by
- debugged typo in _test_iter
- 09:17 Changeset [13374] by
- adjusted _test_iter for dict return value of RawData.next()
04/17/12:
- 23:19 Changeset [13373] by
- additional output
- 22:57 Changeset [13372] by
- Operator: check events tab during first drs calib
- 22:51 Changeset [13371] by
- edited comment output
- 22:47 Changeset [13370] by
- tidied up by using additional scripts
- 22:47 Changeset [13369] by
- tidied up by using additional scripts
- 17:16 Changeset [13368] by
- initial commit of my sandbox
- 17:14 Changeset [13367] by
- ZeroXing supports also Xings at different levels, so one can set the zero-level to another level
- 15:53 Changeset [13366] by
- According to the root docu some GetRoot() calls should be GetDefaultRoot()
- 14:57 Changeset [13365] by
- Added two more modes.
- 14:51 Changeset [13364] by
- Implemented the possibility to start an eventloop in a step-by-step mode which stops at each event which is not flagged with kCONTINUE.
- 11:50 Changeset [13363] by
- fixed column names
- 11:47 Changeset [13362] by
- added link to logbook in comments column
- 09:54 Changeset [13361] by
- 09:44 Changeset [13360] by
- svn ignore _build folder
- 09:39 Changeset [13359] by
- deleted _build folder
- 09:18 Changeset [13358] by
- just some tests for file random walk ... just for me... DN
- 09:17 Changeset [13357] by
- deleted testfile: pynew.py
- 09:16 Changeset [13356] by
- new class RawDataFeeder initial commit
- 09:13 Changeset [13355] by
- supports table columns type 'A'
- 09:05 Changeset [13354] by
- initial commit of new python wrapper class. usable for reading of slow data files
- 09:04 Changeset [13353] by
- added debug output
04/16/12:
- 16:15 Changeset [13352] by
- edited comments
- 16:14 Changeset [13351] by
- edited comments
- 16:12 Changeset [13350] by
- additional mini script to for tracking crab and to tidy up the data taking scripts
- 14:29 Changeset [13349] by
- switched to the 0new commenting method
- 13:49 Changeset [13348] by
- switched to new commenting commands
- 13:48 Changeset [13347] by
- switched to new commenting commands
- 13:48 Changeset [13346] by
- switched to new commenting commands
- 13:47 Changeset [13345] by
- switched to new commenting commands
- 13:47 Changeset [13344] by
- switched to new commenting commands
- 12:49 Changeset [13343] by
- fixed bug
- 12:47 Changeset [13342] by
- improved logging
- 12:43 Changeset [13341] by
- fixed bug for tooltip mode
04/12/12:
- 20:06 Changeset [13340] by
- Fixed a typo in a log text.
- 20:05 Changeset [13339] by
- Updated to v19r31
- 11:46 Changeset [13338] by
- ignoreing *.d and __pycache__ folder
- 11:45 Changeset [13337] by
- ignoring _build/html and _build/doctrees
- 11:41 Changeset [13336] by
- example for the new features of pyfits.h
- 11:27 Changeset [13335] by
- forgot headline ... debugged
- 11:25 Changeset [13334] by
- included extractor.py into classes.rst
- 11:22 Changeset [13333] by
- supports automodule
- 10:23 Changeset [13332] by
- inserted getters for fits header information
04/11/12:
- 08:58 Changeset [13331] by
- added first unit test of fir_filter module - use py.test to conduct it
- 08:55 Changeset [13330] by
- debugged filter artifacts in the first few slices, by hand.... ugly but works
04/07/12:
- 10:15 Changeset [13329] by
- added automodule support
- 10:13 Changeset [13328] by
- added automodule support
- 10:12 Changeset [13327] by
- added doc strings
- 10:11 Changeset [13326] by
- added more autoclass statements and one automodule statement
- 10:10 Changeset [13325] by
- removed doubled classes content and added some examples
04/05/12:
- 17:32 Changeset [13324] by
- updated
- 17:31 Changeset [13323] by
- set a data path which would run at the cluster
- 17:01 Changeset [13322] by
- bugfix for date pulldowns
- 15:54 Changeset [13321] by
- limit iterations for _test_iter
- 15:32 Changeset [13320] by
- better call it fits_h.so
- 15:30 Changeset [13319] by
- for convinience
- 14:44 Changeset [13318] by
- changed fitslib name to pyfits_h.so, which is the default created by ROOT
- 14:41 Changeset [13317] by
- added copies of fits.h == pyfits.h and izstream.h for simplicity
- 14:10 Changeset [13316] by
- worked on doc
- 13:07 Changeset [13315] by
- included SequenceComments database
- 13:06 Changeset [13314] by
- corrected names of columns
04/04/12:
- 17:12 Changeset [13313] by
- improved logging
- 16:28 Changeset [13312] by
- adapted parameters to run script via cron
- 16:27 Changeset [13311] by
- added crons for CheckTransfer.sh and CheckDU.sh
- 16:26 Changeset [13310] by
- warn only if lockfile older than 5 minutes
- 16:25 Changeset [13309] by
- added check for /archive/fact/fails/raw
- 12:49 Changeset [13308] by
- replaced by new version
- 12:48 Changeset [13307] by
- replaced by new version
- 12:45 Changeset [13306] by
- added (new versions of setup files to include all variables)
- 12:44 Changeset [13305] by
- added (script to backup databases)
- 12:43 Changeset [13304] by
- new version to use /users/fact instead of /home/fact
- 12:42 Changeset [13303] by
- fixed typo
- 12:41 Changeset [13302] by
- removed things which belong into setup files
- 12:40 Changeset [13301] by
- adapted script for more hosts
- 10:20 Changeset [13300] by
- example ...
04/03/12:
- 11:47 Changeset [13299] by
- removed debug print out
- 11:46 Changeset [13298] by
- made a real example out of it ... should be comprehendable and working now
- 10:30 Changeset [13297] by
- ignore QoS of messages in log file
- 09:40 Changeset [13296] by
- added datalogger prefix to datalogger log messages
04/02/12:
- 13:48 Changeset [13295] by
- Removed an obsolete const-cast.
03/30/12:
- 22:29 Changeset [13294] by
- Added an automatic reconnect under certain conditions.
- 18:07 Changeset [13293] by
- fixed path
- 18:00 Changeset [13292] by
- added nice and ionice for processes working with data
- 17:58 Changeset [13291] by
- added nice and ionice for processes working with data
03/29/12:
- 18:20 Changeset [13290] by
- can be used for profiling
- 11:15 Changeset [13289] by
- added DriveFileAvailISDC and changed requirement for Star from AuxFilesAvailISDC to DriveFileAvailISDC
- 11:14 Changeset [13288] by
- added (script to check availability of DRIVE_CONTROL_TRACKING_POSITION.fits)
- 11:09 Changeset [13287] by
- added nightly insert for new table DriveFileAvailISDCStatus
- 10:28 Changeset [13286] by
- Changed # to be a real comment and > to be a comment writting to the log-files.
- 10:03 Changeset [13285] by
- give only warning if files older than some days are missing
- 10:02 Changeset [13284] by
- fixed typo
- 10:02 Changeset [13283] by
- run CheckStatus.sh only twice a day
- 10:01 Changeset [13282] by
- added jobmanager and SGE environment
- 09:59 Changeset [13281] by
- fixed typo
- 07:19 Changeset [13280] by
- changed that within the script <IsReadyForDataTaking> is called from the subfolder ServiceScripts
- 07:09 Changeset [13279] by
- small bugfix
- 07:09 Changeset [13278] by
- small bugfix
- 06:27 Changeset [13277] by
- changed that within the script <IsReadyForDataTaking> is called from the subfolder ServiceScripts
- 06:27 Changeset [13276] by
- changed that within the script <IsReadyForDataTaking> is called from the subfolder ServiceScripts
- 06:09 Changeset [13275] by
- deleted TestMrkTracking from svn cause it was exidentally added
- 06:07 Changeset [13274] by
- deleted TestCrabTracking from svn cause it was exidentally added
- 05:48 Changeset [13273] by
- exchanged <echo> output command against <#> output
- 05:47 Changeset [13272] by
- exchanged <echo> output command against <#> output
- 05:47 Changeset [13271] by
- exchanged <echo> output command against <#> output
- 05:46 Changeset [13270] by
- exchanged <echo> output command against <#> output
- 05:46 Changeset [13269] by
- exchanged <echo> output command against <#> output
- 05:34 Changeset [13268] by
- some comment edits
- 05:32 Changeset [13267] by
- check statuses of bias, feedback, fad and drive before starting a data run
- 05:29 Changeset [13266] by
- additional mini scripts to tidy up the data taking scripts
- 05:12 Changeset [13265] by
- some spellchecking in the comments
- 05:11 Changeset [13264] by
- some spellchecking in the comments
- 04:59 Changeset [13263] by
- some changes in the commenmts
- 04:55 Changeset [13262] by
- changed position of reminder for opereator to measure sky brightness
- 04:50 Changeset [13261] by
- added commenmts for new log comments
- 04:48 Changeset [13260] by
- added commenmts for new log comments, still echos in script, will delete when all scripts are ready
03/28/12:
- 23:14 Changeset [13259] by
- Set fDebugTx per default to false
- 21:38 Changeset [13258] by
- Ensure that after a successfull overcurrent reset at least one status request is send.
- 21:14 Changeset [13257] by
- Changed the description for the exit command.
- 20:51 Changeset [13256] by
- Set names for the dim services.
- 20:50 Changeset [13255] by
- Changed the resistance of the broken pixels to 390Ohm. Test yesterday night have shown that the amplitude is too low.
- 20:48 Changeset [13254] by
- Removed the stray Xs in the dim service names which were for debugging.
- 20:20 Changeset [13253] by
- 13:23 Changeset [13252] by
- Fixed a typo.
03/27/12:
- 23:11 Changeset [13251] by
- Encapsulated the waiting for a state into proper switching off and on of the output stream buffer.
- 20:56 Changeset [13250] by
- just a test
- 11:19 Changeset [13249] by
- Fixed the 'broken pixel' correction. The voltage was devided by the correction instead of multiplied.
- 10:31 Changeset [13248] by
- Plot the results of a ratescan from a slow control file.
- 10:06 Changeset [13247] by
- Load iomanip per default.
- 09:50 Changeset [13246] by
- deleted pyfact.py testing version, did not belong in svn
- 09:24 Changeset [13245] by
- new version ... with Feeder and Anaylsis .. do not use
- 00:00 Changeset [13244] by
- log output alignment
- 00:00 Changeset [13243] by
- log output alignment
03/26/12:
- 22:57 Changeset [13242] by
- Updated some log-output.
- 22:56 Changeset [13241] by
- Added another sanity check for the output.
- 22:04 Changeset [13240] by
- Added a sanity check for the new output
- 22:03 Changeset [13239] by
- Propagate G-APD bias offset and set-point seperately.
- 22:02 Changeset [13238] by
- Updated to new biasctrl commands; removed some obsolete endl; reduced the resistance for the broken pixels' patches
- 22:01 Changeset [13237] by
- Updated to fit the new biasctrl command and services.
- 22:01 Changeset [13236] by
- Changed the code in a way that now it operates on floating point values rather than dac counts and only converts to dac counts as last step. This also enables that the bias crate calibration offset is now separated from the set-value and the displayed value in the gui should be the actual output value of the crate.
- 16:10 Changeset [13235] by
- Decreased the serial resistance from 1150 Ohm to 1100 Ohm; fixed a typo in a variable name; added some debug out for the voltage offsets; added a workaround for the three patches with the broken pixel
- 15:51 Changeset [13234] by
- commented out every plotting stuff, so I can use it at ISDC without X
- 15:50 Changeset [13233] by
- moved matplotlib import statement to __main__, so it is only imported, when needed
- 15:50 Changeset [13232] by
- moved matplotlib import statement to __main__, so it is only imported, when needed
- 15:49 Changeset [13231] by
- using math module instead of pylab ...
- 15:48 Changeset [13230] by
- moved matplotlib import statement to __main__, so it is only imported, when needed
- 13:32 Changeset [13229] by
- still testing
- 13:30 Changeset [13228] by
- changes as discussed with werner ... not executable anymore
- 13:29 Changeset [13227] by
- evolving to the next level
- 11:29 Changeset [13226] by
- corrected typo
- 09:06 Changeset [13225] by
- Do not read more than the expected number of rows per default.
- 08:48 Changeset [13224] by
- Made the number of requests during calibration an option.
- 08:47 Changeset [13223] by
- Unintentionally changed the allowed states for TRACK_SOURCE with the last commit
- 08:46 Changeset [13222] by
- Replaced W format by C for TRACK_SOURCE
- 08:46 Changeset [13221] by
- Added TrimQuotes
- 08:45 Changeset [13220] by
- Improved debugging output.
- 05:17 Changeset [13219] by
- changed waiting time before track command
- 03:00 Changeset [13218] by
- added check if bias, feedback, drive and fad are in the correct state to write data
03/24/12:
- 22:23 Changeset [13217] by
- Some improved debug output.
- 22:23 Changeset [13216] by
- Updated some FITS descriptions.
- 04:10 Changeset [13215] by
- short script to check if bias, feedback, drive and fad are in the correct state to write data
- 04:08 Changeset [13214] by
- added check before data run to assure that bias, feedback, drive and fad are in the correct state
- 04:08 Changeset [13213] by
- added check before data run to assure that bias, feedback, drive and fad are in the correct state
03/23/12:
- 22:32 Changeset [13212] by
- Updated state names.
- 22:17 Changeset [13211] by
- Improves state handling.
- 22:09 Changeset [13210] by
- Removed all the unnecessary log-messages.
- 22:08 Changeset [13209] by
- Implemented fVerbose to switch verbosity of default messages on and off.
- 16:00 Changeset [13208] by
- Write comments as such.
- 15:59 Changeset [13207] by
- Addeda new log-class: comments
- 15:59 Changeset [13206] by
- Pipe comments to the log-file; added the missing jump label.
- 14:50 Changeset [13205] by
- added fence from prevent column desc of messages services
- 14:26 Changeset [13204] by
- added output to see which service creates column warning
- 13:48 Changeset [13203] by
- Updated the options.
- 13:45 Changeset [13202] by
- Updated the help text.
- 12:05 Changeset [13201] by
- Made DebugTx optional.
- 12:05 Changeset [13200] by
- Use Debug() when fDebugTx is enabled.
- 11:57 Changeset [13199] by
- Replaced wind direction by human readable strings.
- 11:44 Changeset [13198] by
- Replace degree value for wind direction with human readable value
- 11:33 Changeset [13197] by
- Shortened some dim descriptions.
- 11:31 Changeset [13196] by
- Shortened some dim descriptions.
- 11:28 Changeset [13195] by
- Shortened descriptions to make the datalogger more happy.
- 11:21 Changeset [13194] by
- Updated some dim descriptions; suppress unecessary output by default.
- 11:13 Changeset [13193] by
- Print AddService info only when it is really a service.
- 11:06 Changeset [13192] by
- Some improvement to header evaluation.
- 10:22 Changeset [13191] by
- Changed the default interval from 55s to 25s. Made it an option.
- 09:08 Changeset [13190] by
- Propagate max number of events and time correctly as signed int.
- 09:01 Changeset [13189] by
- Delay setting new volatges during current requests.
- 04:57 Changeset [13188] by
- changed the output
- 04:56 Changeset [13187] by
- changed the output
- 04:06 Changeset [13186] by
- resume data taking after it had to be aborted during first run of four
- 02:08 Changeset [13185] by
- spell check
- 02:07 Changeset [13184] by
- Script for Crab data taking, that automatically takes both wobble positions and sents the necessary commands to drivectrl
- 01:58 Changeset [13183] by
- changed the time waited before sending commands to drivectrl
03/22/12:
- 21:19 Changeset [13182] by
- included calculation of some more hillas parameters, still no unit tests ... no clear structure, but there is an example script in examples/hillas_test.py
- 21:17 Changeset [13181] by
- added member, which contains numpy arrays instead of Vector2 objects. this class needs reworking! It is simply ugly
- 21:15 Changeset [13180] by
- test functions are using Plotter class, and SignalGenerator class in order to produce test vectors, before they were doing that themselves.
- 21:02 Changeset [13179] by
- Updated help text for '.s'
- 21:01 Changeset [13178] by
- Send current requests in current control mode only when voltage is switched on.
- 21:01 Changeset [13177] by
- initial commit of a script using the pyafact/image_extractors ...
- 21:00 Changeset [13176] by
- changed pyfact_rename to pyfact and switched on the tabulator checking
- 20:41 Changeset [13175] by
- introduced calculation of number of islands, but I did not want to change the return value, maybe I should return a dict as well ...
- 20:38 Changeset [13174] by
- Plotter was not correctly plotting the grid, introduced the plotting of the grid into the __call__ now it works
- 16:57 Changeset [13173] by
- added (script to build sequences)
- 16:56 Changeset [13172] by
- added (crontab file for fact_opr on isdc-viewer00)
- 16:55 Changeset [13171] by
- improved output, fixed bugs
- 15:01 Changeset [13170] by
- Added checks for the consistency of the event and trigger number.
- 14:56 Changeset [13169] by
- Improved some debug output, removed obsolete SetMode; commented out some old debug output.
- 14:52 Changeset [13168] by
- Implemented a function for word wraping
- 14:51 Changeset [13167] by
- Moved read to cc file; implemented first version of a database interface.
- 11:14 Changeset [13166] by
- Make sure that the connection is the last in the configuration; improved sanity checks in Track()
- 11:04 Changeset [13165] by
- Added some improved output.
- 10:21 Changeset [13164] by
- Implemented new command to set all offsets individually (for current control)
- 10:19 Changeset [13163] by
- Replaces all 416 by kNumChannels; send the correct command to set the correct offset for all channels individually in current control.
- 07:06 Changeset [13162] by
- DimScript for data taking, that only takes the 4 5min data runs, can be used if DataTaking1/2 crashed at beginning of data tacking
- 07:04 Changeset [13161] by
- DimScript for data taking MRK421, that automatically takes both wobble positions and sents the necessary commands to drivectrl
03/21/12:
- 14:33 Changeset [13160] by
- Some clean up to the commands.
- 14:22 Changeset [13159] by
- Assume that an empty folder name means '.'
- 13:50 Changeset [13158] by
- added insert to nightly status tables, removed insert for status tables for runs (done with mysql trigger now)
03/20/12:
- 14:37 Changeset [13157] by
- FSC resistances converted into temperature for online display
- 09:27 Changeset [13156] by
- new interface of next(), and hence a new option in the __init__() methon ... old interface is considered depricated
- 09:09 Changeset [13155] by
- debugged DRs amplitude calibration. tom must not be rolled
Note:
See TracTimeline
for information about the timeline view.
