Timeline
07/19/13:
- 12:55 Changeset [16967] by
- Updated new feedback algorithm.
- 12:50 Changeset [16966] by
- Changed sign of the offset, so that the offset/slope combination represents a line in volt-vs-dac, added slope.
- 12:49 Changeset [16965] by
- Added the slope to the channel calibration (conversion from dac counts to voltage and vice versa); added slope to dim service; round the dac counts instead of cutting the remainder
- 09:07 Changeset [16964] by
- replaced fits with fact fits to be able to read compressed files
07/18/13:
- 13:18 Changeset [16963] by
- Added ln_get_angular_separation.
- 13:17 Changeset [16962] by
- Added GetAngularSeparation
- 13:10 Changeset [16961] by
- Fixed a typo in the program option descriptions.
- 13:10 Changeset [16960] by
- Renamed Seeing to SeeingMed, added SeeingStdev and Solarimeter
- 13:10 Changeset [16959] by
- Use ::tolower instead of this compilcated cast construction.
- 13:09 Changeset [16958] by
- Made StartConnection virtual to allow ConnectionGCN to change the IP address with every connect.
- 13:09 Changeset [16957] by
- Removed the need for the Soprano library, we are using the Qt-classes instead now. Added gcn to the list of programs to be compiles. Removed the linking of QtWebKit, it is not needed.
- 13:05 Changeset [16956] by
- Added a check that the new night-as-int is never decreased; improved log output.
- 13:02 Changeset [16955] by
- Removed the need for the Soprano library, fixed the units in the reports, added solarimeter measurements and updates the seeing to seeing median and stdev.
- 13:01 Changeset [16954] by
07/16/13:
- 23:35 DataTakingMainPage edited by
- (diff)
- 23:34 DataTakingMainPage edited by
- (diff)
- 23:21 DataTakingMainPage edited by
- (diff)
- 23:19 DataTakingMainPage edited by
- (diff)
- 23:14 DataTakingMainPage edited by
- (diff)
- 23:14 ScheduleTemplate created by
- 23:13 ScreenSessionHelpfulCommands edited by
- (diff)
- 23:11 ScreenSessionHelpfulCommands created by
- 23:02 DataTakingMainPage edited by
- (diff)
- 23:00 TemplateQuotingLogFiles edited by
- (diff)
- 23:00 TemplateQuotingLogFiles created by
- 22:58 DataTakingMainPage edited by
- (diff)
- 22:57 DataTakingMainPage edited by
- (diff)
- 22:57 DataTakingMainPage edited by
- (diff)
- 22:57 TemplateNormalDatatakingSet created by
- 22:55 DataTakingMainPage edited by
- (diff)
- 22:55 TemplateShiftSummary created by
- 22:46 DataTakingCheckList edited by
- (diff)
- 22:37 DataTakingCheckList created by
- 22:30 DataTakingMainPage edited by
- (diff)
- 22:08 DataTakingMainPage created by
- 22:07 WikiStart edited by
- (diff)
07/11/13:
07/10/13:
- 19:03 Changeset [16952] by
- 18:59 Changeset [16951] by
- 18:48 Changeset [16950] by
- 18:37 Changeset [16949] by
- 18:20 Changeset [16948] by
- 16:59 Changeset [16947] by
- Updated the comments in calfactfits.h.
07/03/13:
07/02/13:
- 17:57 Changeset [16945] by
- 10:22 Changeset [16944] by
- Fixed FITS conformance issue for .fz files when numrows=0
06/30/13:
06/28/13:
- 14:32 Changeset [16941] by
- Moved the conversion from dac to volt to its own function - for later easier replacement of the calibration.
- 14:10 Changeset [16940] by
- Added a comment.
- 11:57 Changeset [16939] by
- got rid of over 1024 start cell values by adding modulo
06/27/13:
- 23:27 Changeset [16938] by
- Added begining and end of line to output.
- 22:21 Changeset [16937] by
- Some fixes for the display of command completion results; fixed the removal of double entries from the history; added Home and End to key bindings output
- 20:11 Changeset [16936] by
- Added a very simple command completion for java.
- 13:10 Changeset [16935] by
- god rid of ambiguous cast error
- 04:13 Changeset [16934] by
- 03:14 Changeset [16933] by
- 03:01 Changeset [16932] by
- 03:00 Changeset [16931] by
- 02:59 Changeset [16930] by
- 02:57 Changeset [16929] by
- 02:55 Changeset [16928] by
- 02:55 Changeset [16927] by
- 02:33 Changeset [16926] by
- 02:29 Changeset [16925] by
- 02:15 Changeset [16924] by
- 02:14 Changeset [16923] by
- 02:13 Changeset [16922] by
- 02:06 Changeset [16921] by
- 02:05 Changeset [16920] by
- 02:03 Changeset [16919] by
06/26/13:
- 20:30 Changeset [16918] by
- 18:05 Changeset [16917] by
- Some consistency... dorce update is the strongest call we have to update the prompt as far as I understand.
- 18:00 Changeset [16916] by
- Not only when the screen geometry changes, but also when the prompt change we have to go back to the beginning of the line and re-display the prompt, this is because readline cannot determine the size of the prompt well, because of the ascii control condes
- 03:08 Changeset [16915] by
- 03:04 Changeset [16914] by
- 03:00 Changeset [16913] by
- 02:55 Changeset [16912] by
06/25/13:
- 15:38 Changeset [16911] by
- 15:33 Changeset [16910] by
- 15:11 Changeset [16909] by
- 15:08 Changeset [16908] by
- 15:05 Changeset [16907] by
- 15:04 Changeset [16906] by
- 14:41 Changeset [16905] by
- 14:32 Changeset [16904] by
- 14:28 Changeset [16903] by
- 14:26 Changeset [16902] by
- 14:20 Changeset [16901] by
- 14:18 Changeset [16900] by
- 02:46 Changeset [16899] by
06/24/13:
- 16:04 Changeset [16898] by
- Propagated the new naming of enums to other files....
- 15:57 Changeset [16897] by
- Removed bytes swapping for RAWSUM
- 15:16 Changeset [16896] by
- Added RAWSUM calculation, merged fits.h
06/23/13:
- 09:57 Changeset [16895] by
- 09:54 Changeset [16894] by
- 00:10 Changeset [16893] by
- Fixed a typo, added the missing cast and removed also the MRawEvtData from the list to avoid confusion in MReadFitsFile when the size of the array is dtermined.
06/22/13:
- 16:48 Changeset [16892] by
- 16:47 Changeset [16891] by
- Added a check for underflows, for the case the gains are read as offsets... only for checking purpose.
- 16:28 Changeset [16890] by
- Consistency of member names
- 15:31 Changeset [16889] by
- Some cleaning to easier understand the code.
- 15:30 Changeset [16888] by
- Given proper names to the enums... we are not programming Fortran style anymore.
- 11:45 Changeset [16887] by
- Added some smoothing to the deviation responsible for the OnTrack/Tracking; allow a second auto resume after five seconds.
- 10:07 Changeset [16886] by
- Make sure no consietncy check is done for the last file.
06/21/13:
- 22:30 Changeset [16885] by
- Slightly modified appearance of log-stream.
- 22:29 Changeset [16884] by
- Fixed two compiler warnings.
- 22:29 Changeset [16883] by
- Fixed two typos.
- 17:08 Changeset [16882] by
- added correct checksum calculation for compressed fits reader (zfits)
- 16:05 Changeset [16881] by
- Replaced some loops with cout.write for better performance
- 16:02 Changeset [16880] by
- Redisplay has to check if this is an update due to change of terminal size. If this is the case the cursor must be moved back to the beginning of the line. For convenience we also clean the line (to remove the last charcter in the line, which (maybe fpor safty reason to avoid newlines) readline doesn't remove.
- 16:01 Changeset [16879] by
- Removed the newline before the prompt. That's were the problems with the display came from.
- 16:00 Changeset [16878] by
- Removed the obsolete check for 'use striut'
- 14:41 Changeset [16877] by
- Removed a stray debug output.
- 13:38 Changeset [16876] by
- removed wrong error tags in log files
06/20/13:
- 21:54 Changeset [16875] by
- Fixed an issue with the detection of the 'camera' argument.
- 21:54 Changeset [16874] by
- Direct the output in case of wrong states to the dim log.
- 05:02 Changeset [16873] by
06/19/13:
- 17:14 Changeset [16872] by
- Updated EventHook to match virtual function definition.
- 17:10 Changeset [16871] by
- Use a to_string instead of an ostringstream for conversion
- 17:09 Changeset [16870] by
- When we output something ourselves before the event hook is called in readline, we have to signal readline that we have started a new row, so that readline can properly update the prompt. I hope this finally solves the flickering issue on my laptop and/or the problematic display in the fadctrl.
- 17:09 Changeset [16869] by
- When we output something ourselves before the event hook is called in readline, we have to signal readline that we have started a new row, so that readline can properly update the prompt. I hope this finally solves the flickering issue on my laptop and/or the problematic display in the fadctrl.
- 13:14 Changeset [16868] by
- Added 'home' and 'end' key to fixed key bindings, this makes it work in screen. Updated the EventHook again. This version still gives some flicker on my laptop, but it works on La Palma and at least the line buffer doesn't jump.
- 12:47 Changeset [16867] by
- got rid of defines
- 11:21 Changeset [16866] by
- Removed the output of the ratescans to an ascii file. Sending it to the datalogger has proven to be stable.
- 11:20 Changeset [16865] by
- Increased the time to wait for the data of a ftm reply to a macroscopic time. There is no need to be picky about the receiving time and it can happen that other events in the queue are processed in between.
Note:
See TracTimeline
for information about the timeline view.
