Timeline
04/22/14:
- 23:31 Changeset [17681] by
- Some updated to the authentication code to make the result more logical; a minor update to handling interrupts
- 23:30 Changeset [17680] by
- Opacity of 'gray out' to 50%
- 14:55 Changeset [17679] by
- Fixed a bug which could cause infinite loops when an event with invalid FADhead was checked for timout (the it++ was missing), added a lot of comments
04/19/14:
- 01:13 Changeset [17678] by
- It can happen that an event has been created but no header is ever received. If it times out, the header was accessed which is not valid. With the recent fix, I assume that whenever something is received all the rest from the board is received as well, or: half events from one board do not time out.
04/18/14:
- 22:00 Changeset [17677] by
- Fixed the last fix... using a variable type which allows hundreds of terabytes to be allocated is for sure no option. Actually, restricting the amount of memory which can be allocated is a feature not a problem. The correct way to fix the problem is to properly cast the variable before it is converted from kB to Byte.
- 21:13 Changeset [17676] by
- New program to display smartfact events from the previous night during daytime.
04/17/14:
- 08:40 Changeset [17675] by
- modified the fitsDecompressor code to take into account the refactoring of the fits classes, namely the introduction of FITS.h
- 08:32 Changeset [17674] by
- modified the fitsCompressor code to take into account the refactoring of the fits classes, namely the introduction of FITS.h
04/16/14:
- 23:51 Changeset [17673] by
- Adapted to have three agilentctrl running instead of one.
- 21:07 Changeset [17672] by
- Replaced one agilentctrl by three; fixed the calculatio of the power; display all pixels, and use ch8 at TM channel
- 20:33 Changeset [17671] by
- Removed old agilent.page and replaced that with one per Agilent.
- 20:32 Changeset [17670] by
- Added all three agients
- 18:43 Changeset [17669] by
- Implemented the possibility to start more than one agilentctrl to read from all agilents.
- 17:11 Changeset [17668] by
- Remplaced the double backslash in a root axis title by a #. Otherwiese some root version fail to create the eps
04/14/14:
- 12:36 Changeset [17667] by
- fixed uint32 bug for max available memory
04/11/14:
- 12:03 Changeset [17666] by
- Forget to compile, before checkin, and therefore didn't see some small mistakes in the code
- 11:57 Changeset [17665] by
- Forget to set the arrays of the MTruePhotonsPerPixel container to zero, before adding the photons in MSimCamera
04/08/14:
- 16:14 Changeset [17664] by
- Added return code
- 12:45 Ticket #8 (crosscheck PDE simulation) created by
- (This ticket is derived from a mail from Thomas Bretz) The PDE curve …
- 12:43 Ticket #7 (crosstalk variations) created by
- (This ticket is derived from a mail from Thomas Bretz) The crosstalk …
- 12:42 Ticket #6 (biased light pulser based calibration) created by
- (This ticket is derived from a mail from Thomas Bretz) The current …
- 12:40 Ticket #5 (Simulation of time jitter) created by
- (This ticket is derived from a mail from Thomas Bretz) I am not sure …
- 12:38 Ticket #4 (Simulate SiPM time jitter) created by
- (This ticket is derived from a mail from Thomas Bretz) Currently the …
- 12:27 Ticket #3 (Writing of all primitive datatypes and arrays of them in the fits output) created by
- It would be nice, that mfileio/MWriteFitsFile would have the …
- 12:25 Ticket #2 (Verify DrsCalibrateTime) created by
- The calculation of the calibration constants to perform the …
- 12:21 Ticket #1 (McTruth number of cherenkov photons in pixel) closed by
- fixed: - resolved in the changesets [17661], [17662], [17663] - Added the …
04/07/14:
- 15:05 Changeset [17663] by
- Added the creation of a MTruePhotonsPerPixelCont in MSimCamera and the filling of the arrays of the container. Also added the container to the fitsoutput
- 15:03 Changeset [17662] by
- Added the new MTruePhotonsPerPixelCont MParContainer to store the mctruth of the number of cherenkov photons and so on. Also made the necessary changes in SimCameraLinkDef and Makefile
- 15:01 Changeset [17661] by
- Added the writing of MArrayF in MWriteFitsFile
04/06/14:
- 14:02 Changeset [17660] by
- Fixed the binning, so that we are not suing the overflow bin anymore for the last bin.
- 14:01 Changeset [17659] by
- Output when the MCP/STOP command has been sent.
- 13:54 Changeset [17658] by
- Even if the event is not valid, attach the latest trigger counter to it.
- 13:53 Changeset [17657] by
- Use the trigger counter from the last event when writing the footer data; this might need another update when we start to discarde events due to software triggers and the like; it fixes a problem which occured in cases with fadloss when an inavlid event is posted to the queue and the runClose used that data to write the footer; updated the comments in the FITS header
04/05/14:
- 19:31 Changeset [17656] by
- To calculate the relative energy threshold not the current must be used but the trigger threshold -- used the numbers from the paper; adapted y-scale of the plot accordingly
04/04/14:
- 22:05 Changeset [17655] by
- To check for not equal one should use != not == and to add a text to a string, the text alone is not enough.
- 11:34 Changeset [17654] by
- Removed the obsolete ra/dec arguments; output pdf as well
- 11:25 Changeset [17653] by
- Renormalized the relative nergy threshold to 1 at best conditions.
- 11:15 Changeset [17652] by
- Updated to the latest current prediction (from the calibration paper); some code improvements; store files now by default into a subdirectory and omit the '-quality' in the filename; added some more information on the currents in the camera
- 11:02 Changeset [17651] by
- Updated with the current prediction from the calibration paper; make plots only for VHE sources.
- 10:15 Changeset [17650] by
- Commented two unused variables to avoid compiler warnings.
- 10:15 Changeset [17649] by
- Removed a stray instantiation of a non-existing variable.
- 10:11 Changeset [17648] by
- Fixed a typo in a comment.
04/03/14:
- 19:35 Changeset [17647] by
- Added average and rms of Uov for logging; some updates to show how the resistance of the broken patches is calculated; ensure that Udrp does not get negative; Do not allow an overvoltage to be less than -0.44V in real this roubly correponds to the breakdown voltage -- that has to be fixed); in all calculation take into account that the assumed overvoltage of 1.1V is wrong and the real one is about 1.4V; all these changes exist since a long time, but are just comitted now
- 19:29 Changeset [17646] by
- Same LED for VoltageOff and Locked
- 16:08 Changeset [17645] by
- Removed an unused argument.
- 16:07 Changeset [17644] by
- Implemented the auto pause command, the pause and resume command and a Paused state.
- 11:54 Changeset [17643] by
- Added a MParameterD for the Crosstalkcoefficient, so that MSimCamera can access the crosstalk coefficient for the calculation of the accoupling.
04/01/14:
- 15:56 Changeset [17642] by
- Moved the AppendPad before all histograms. In this was when a canvas is opened from a file and deleted first the destructor of MH3 and then fHist is called, so that they are deleted in the correct order -- this is a workaround, but should do the trick.
- 14:38 Changeset [17641] by
- Added the calculation of Disp and ThetaSq in the MC-Star macro and commented the lightpulser calibration in the MC-Callisto macro out
- 12:08 DataTakingCheckList edited by
- (diff)
- 12:06 DataTakingMainPage edited by
- (diff)
03/31/14:
- 16:16 Changeset [17640] by
- Implemented an outomatic voltage off at sunrise
- 16:14 Changeset [17639] by
- Replaced define by enum.
- 16:13 Changeset [17638] by
- Allow ir interruption during ovtest, updated shutdown message.
- 16:12 Changeset [17637] by
- Catch when a DRS calibration could not be restored.
03/27/14:
- 16:11 Changeset [17636] by
- Simplified the code to read from the socket; some more cosmitcs and simplifications; increased precision of voltage calculation; added counter to track the broken messages
Note:
See TracTimeline
for information about the timeline view.
