Back to DataTakingMainPage

= Manually Startup, currently not needed

== Manually hardware startup on the Island

=== General Remark

- **NEVER** switch off the Agilent Interlock System (black button)
- don't operate camera, bias supply and bias crate without the cooling
- Note that camera and bias supply will blink in red when the interlock system (black button) is still disabled

=== Startup


1. Interlock (red button)
1. Cooling (silver button,hold it one sec)
1. Camera (black button)
1. Bias supply (black button)
1. Crate board (green button)
1. Drive

== Manually Startup of software and hardware remotely 

0. make sure that all needed programs are running ([[preparationdetails#softwarelist list of needed software]])
0. start GUI (if not already running)
 - cd ~/operations
 - ./factGL
0. start Hardware
 - open the page 10.0.100.100 from a computer in the internal network of La Palma
 - push Enable Pump to start the Camera
  - now the Buttons IL_ON, FP, FC, BP, FL should be in state high
 - push Toggle X, and Toggle Y to start the Drive
  - Drive is on, when X_OK, Y_OK, Z_OK are in state high
 - wait a 1-3 minutes, so that the Drive can boot
 - for further informations about the remote control of the hardware see [[preparationdetails#pdremote here]]
0. start Cosy, if not already running (on aux)
 - cd ~/Drive/Cosy
 - ./cosy
0. biasctrl/RECONNECT