= Remote Control of the Hardware

**//be aware this whole section might have some mistakes yet, it will be overworked soon//**

__Camera and Drive__

- Camera and Drive can be controlled via the page 10.0.100.100 
- or the program powerctrl
 - CAMERA_POWER, starts / stops the Camera
 - TOGGLE_DRIVE start / stop the Drive

__Lid__

- lid can be controlled via the page 10.0.100.26
- or the program lidctrl

__Agilent Power Supplies__

- there are 3 Power Supplies:
- Interlock:
 - reachable via 10.0.100.224
 - has to switched on
- 80 V power supply for the bias crate
 - reachable via 10.0.100.222
- 50 V power supply for the camera
 - reachable via 10.0.100.220

__Ethernet Controllable Power Switches__

- there are 3 Switches
- Adresses:
 - 10.0.100.230
 - 10.0.100.232
 - 10.0.100.234
- Access
 - on gate:/usr/local/bin/ you can find following scripts to set the state of the switches:
 - 10_0_100_XXX.pl
 - commit an option like -on=y/-off=z to it, to set the state of an output channel of the switch