source: firmware/FTM/ftm_definitions.vhd@ 10410

Last change on this file since 10410 was 10366, checked in by weitzel, 14 years ago
FTM trigger manager from MCSE added; DCM arrangement changed; changes in FTM ethernet module
File size: 20.7 KB
Line 
1----------------------------------------------------------------------------------
2-- Company: ETH Zurich, Institute for Particle Physics
3-- Engineer: Q. Weitzel
4--
5-- Create Date: February 2011
6-- Design Name:
7-- Module Name: ftm_definitions
8-- Project Name:
9-- Target Devices:
10-- Tool versions:
11-- Description: library file for FTM design
12--
13-- Dependencies:
14--
15-- Revision:
16-- Revision 0.01 - File Created
17-- Additional Comments:
18--
19-- modified: Patrick Vogler, February 17 2011
20-- merged with library file from Dortmund, Q. Weitzel, February 24, 2011
21--
22-- kw 25.02.: changes for HDL-Designer (use FACT_FTM.lib.ftm_...),
23-- DD_BLOCK_SIZE added (set to 0x008 for first tests), SD_ADDR_coin_win_[p,c] defined
24--
25-- modified: Quirin Weitzel, March 14 2011
26-- second merger with library file from dortmund (changes below)
27-- kw 01.03.: added array sd_block_default_ftu_active_list (type and defaults)
28-- kw 02.03.: added DD_BLOCK_SIZE_GENERAL (on-time counter + temperatures), changed DD_BLOCK_SIZE to 0x010 for testing
29-- kw 03.03.: added FTM_HEADER_LENGTH
30--
31-- modified: Quirin Weitzel, March 14 2011
32-- third merger with library file from dortmund (changes below)
33-- kw 22.03.: added FTU_ERROR_LENGTH
34-- kw 30.03.: added CMD_AUTOSEND, PAR_AUTOSEND_EA, PAR_AUTOSEND_DA
35--
36---kw 11.04.: added SD_ADDR_ftu_prescaling_0
37--
38----------------------------------------------------------------------------------
39
40
41library IEEE;
42use IEEE.STD_LOGIC_1164.all;
43use IEEE.STD_LOGIC_ARITH.ALL;
44use IEEE.STD_LOGIC_UNSIGNED.ALL;
45use IEEE.NUMERIC_STD.ALL;
46
47package ftm_array_types is
48
49 -- !!! some arrays are also defined in the ftm_constants package !!!
50
51 -- data arrays for a single FTU
52 type FTU_enable_array_type is array (0 to 3) of std_logic_vector(15 downto 0);
53 type FTU_dac_array_type is array (0 to 4) of std_logic_vector(15 downto 0);
54 type FTU_rate_array_type is array (0 to 4) of std_logic_vector(31 downto 0);
55 type active_FTU_array_type is array (0 to 3) of std_logic_vector(15 downto 0);
56 type FTU_answer_array_type is array (0 to 3) of integer range 0 to 10;
57
58 -- data array for clock conditioner interface
59 type clk_cond_array_type is array (0 to 14) of std_logic_vector (31 downto 0);
60
61 -- network array types
62 type ip_type is array (0 to 3) of integer;
63 type mac_type is array (0 to 2) of std_logic_vector (15 downto 0);
64
65 -- Temperature Sensor interface
66 type sensor_array_type is array (0 to 3) of integer range 0 to 2**16 - 1;
67
68end ftm_array_types;
69
70
71library IEEE;
72use IEEE.STD_LOGIC_1164.all;
73use IEEE.STD_LOGIC_ARITH.ALL;
74use IEEE.STD_LOGIC_UNSIGNED.ALL;
75-- for HDL-Designer
76-- LIBRARY FACT_FTM_lib;
77-- use FACT_FTM_lib.ftm_array_types.all;
78library ftm_definitions;
79use ftm_definitions.ftm_array_types.all;
80use IEEE.NUMERIC_STD.ALL;
81use ieee.math_real.all;
82
83package ftm_constants is
84
85 -- !!! many constants depend on each other or are defined 2x with different types !!!
86
87 constant NO_OF_CRATES : integer := 4;
88 constant NO_OF_FTUS_PER_CRATE : integer := 10;
89 constant NO_OF_FTU_ENABLE_REG : integer := 4;
90 constant NO_OF_FTU_DAC_REG : integer := 5;
91
92 --internal FPGA clock frequencies
93 constant INT_CLK_FREQUENCY_1 : integer := 50000000; -- 50MHz
94 constant INT_CLK_FREQUENCY_2 : integer := 250000000; -- 250MHz
95 constant LOW_FREQUENCY : integer := 1000000; -- has to be smaller than INT_CLK_FREQUENCY_1
96 --constant SCALER_FREQ_DIVIDER : integer := 10000; -- for simulation, should normally be 1
97 constant SCALER_FREQ_DIVIDER : integer := 1;
98
99 --FTM address and firmware ID
100 constant FTM_ADDRESS : std_logic_vector(7 downto 0) := "11000000"; -- 192
101 constant FIRMWARE_ID : std_logic_vector(7 downto 0) := "00000001"; -- firmware version
102
103 --communication with FTUs
104 constant FTU_RS485_BAUD_RATE : integer := 250000; -- bits / sec in our case
105 constant FTU_RS485_TIMEOUT : integer := (INT_CLK_FREQUENCY_1 * 2) / 1000; -- 2ms @ 50MHz (100000 clk periods)
106 --constant FTU_RS485_BAUD_RATE : integer := 10000000; -- for simulation
107 --constant FTU_RS485_TIMEOUT : integer := (INT_CLK_FREQUENCY_1 * 2) / 40000; -- for simulation
108 constant FTU_RS485_NO_OF_RETRY : integer range 0 to 2 := 2; -- in case of timeout, !!! HAS TO BE < 3 !!!
109 constant FTU_RS485_BLOCK_WIDTH : integer := 224; -- 28 byte protocol
110 constant FTU_RS485_START_DELIM : std_logic_vector(7 downto 0) := "01000000"; -- start delimiter "@"
111
112 --CRC setup
113 constant CRC_POLYNOMIAL : std_logic_vector(7 downto 0) := "00000111"; -- 8-CCITT
114 constant CRC_INIT_VALUE : std_logic_vector(7 downto 0) := "11111111";
115
116 --DNA identifier for simulation
117 constant DNA_FOR_SIM : bit_vector := X"01710000E0000501";
118
119 -- Clock conditioner (LMK03000, National semiconductor) interface
120 constant MICROWIRE_CLK_FREQUENCY : integer := 2000000; -- 2 MHz
121 -- value to be written to R0 of the LMK03000 to perform a reset, see LMK03000 datasheet
122 constant LMK03000_Reset : std_logic_vector (31 downto 0) := x"80000000";
123 constant LMK03000_REGISTER_WIDTH : integer := 32;
124 constant LMK03000_REGISTER_COUNT : integer := 15; -- number of registers to be programmed in the LMK03000 including reset
125 constant cc_R2_const : std_logic_vector := X"00000102"; -- unused
126 constant cc_R3_const : std_logic_vector := X"00000103"; -- channels
127 constant cc_R4_const : std_logic_vector := X"00000104";
128 constant cc_R5_const : std_logic_vector := X"00000105";
129 constant cc_R6_const : std_logic_vector := X"00000106";
130 constant cc_R7_const : std_logic_vector := X"00000107";
131
132 -- network settings Dortmund
133 -- constant MAC_ADDRESS : mac_type := (X"0011", X"9561", X"95A0");
134 -- constant NETMASK : ip_type := (255, 255, 255, 0);
135 -- constant IP_ADDRESS : ip_type := (129, 217, 160, 118);
136 -- constant GATEWAY : ip_type := (129, 217, 160, 1);
137 -- constant FIRST_PORT : integer := 5000;
138
139 -- network settings Zuerich
140 constant MAC_ADDRESS : mac_type := (X"FAC7", X"0FAD", X"1101");
141 constant NETMASK : ip_type := (255, 255, 248, 0);
142 constant IP_ADDRESS : ip_type := (192, 33, 99, 246);
143 constant GATEWAY : ip_type := (192, 33, 96, 1);
144 constant FIRST_PORT : integer := 5000;
145
146 -- W5300 settings
147 constant W5300_S_INC : std_logic_vector(6 downto 0) := "1000000"; -- socket address offset
148 -- W5300 Registers
149 constant W5300_BASE_ADR : std_logic_vector (9 downto 0) := (others => '0');
150 constant W5300_MR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"0";
151 constant W5300_IR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"2";
152 constant W5300_IMR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"4";
153 constant W5300_SHAR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"8";
154 constant W5300_GAR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"10";
155 constant W5300_SUBR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"14";
156 constant W5300_SIPR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"18";
157 constant W5300_RTR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"1C";
158 constant W5300_RCR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"1E";
159 constant W5300_TMS01R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"20";
160 constant W5300_TMS23R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"22";
161 constant W5300_TMS45R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"24";
162 constant W5300_TMS67R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"26";
163 constant W5300_RMS01R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"28";
164 constant W5300_RMS23R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"2A";
165 constant W5300_RMS45R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"2C";
166 constant W5300_RMS67R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"2E";
167 constant W5300_MTYPER : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"30";
168 constant W5300_S0_MR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"0";
169 constant W5300_S0_CR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"2";
170 constant W5300_S0_IMR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"4";
171 constant W5300_S0_IR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"6";
172 constant W5300_S0_SSR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"8";
173 constant W5300_S0_PORTR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"A";
174 constant W5300_S0_DPORTR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"12";
175 constant W5300_S0_DIPR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"14";
176 constant W5300_S0_TX_WRSR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"20";
177 constant W5300_S0_TX_FSR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"24";
178 constant W5300_S0_RX_RSR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"28";
179 constant W5300_S0_TX_FIFOR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"2E";
180 constant W5300_S0_RX_FIFOR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"30";
181 -- End W5300 registers
182 constant W5300_TX_FIFO_SIZE_8B : integer := 65536; -- Socket TX FIFO-Size in Bytes
183 constant W5300_TX_FIFO_SIZE : integer := (W5300_TX_FIFO_SIZE_8B / 2); -- Socket TX FIFO-Size in 16 Bit Words
184 constant W5300_LAST_SOCKET : integer := 0;
185
186 -- Commands
187 constant CMD_START_DELIMITER : std_logic_vector := X"0040"; -- "@"
188 constant CMD_TLED : std_logic_vector := X"C000"; -- only a test
189 constant CMD_READ : std_logic_vector := X"0001";
190 constant PAR_READ_SD : std_logic_vector := X"0001"; -- read static data block
191 constant PAR_READ_DD : std_logic_vector := X"0002"; -- read dynamic data block
192 -- only for debugging: data_block (0) = ADDR
193 constant PAR_READ_SD_ADDR : std_logic_vector := X"0004"; -- read from address in static data block
194 constant PAR_READ_DD_ADDR : std_logic_vector := X"0008"; -- read from address in dynamic data block
195 constant CMD_WRITE : std_logic_vector := X"0002";
196 constant PAR_WRITE_SD : std_logic_vector := X"0001"; -- write static data block
197 -- only for debugging: data_block (0) = ADDR, data_block (1) = DATA
198 constant PAR_WRITE_SD_ADDR : std_logic_vector := X"0002"; -- write to address in static data ram
199 -- ping all FTUs
200 constant CMD_PING : std_logic_vector := X"0010"; -- ping all FTUs
201 -- turn automatic sending of dd-block and ftu-error-list on or off
202 constant CMD_AUTOSEND : std_logic_vector := X"0020";
203 constant PAR_AUTOSEND_EA : std_logic_vector := X"0001"; -- enable automatic sending
204 constant PAR_AUTOSEND_DA : std_logic_vector := X"0000"; -- disable automatic sending
205
206 -- header length of data packages
207 constant FTM_HEADER_LENGTH : std_logic_vector (7 DOWNTO 0) := X"0B";
208
209 -- FTU error message
210 constant FTU_ERROR_LENGTH : std_logic_vector (11 downto 0) := X"01D"; --(number of unsuccessful calls) + (28 * data) = 29
211
212 -- FTU-list parameters
213 constant FL_BLOCK_SIZE : std_logic_vector := X"0F9"; -- FTU-list size -- 9 + (40 * 6) = 249
214 constant NO_OF_FTU_LIST_REG : integer := 6;
215 constant FTU_LIST_RAM_OFFSET : integer := 16#009#;
216 constant FTU_LIST_RAM_ADDR_WIDTH : integer := 12;
217
218 -- Static data block
219 constant SD_BLOCK_SIZE_GENERAL : integer := 32; -- X"20" -- static data block size without FTU data
220 constant SD_FTU_BASE_ADDR : std_logic_vector := X"020"; -- beginning of FTU data
221 constant STATIC_RAM_CFG_FTU_OFFSET : integer := 16#020#;
222 constant STATIC_RAM_ADDR_WIDTH : integer := 12;
223 constant SD_FTU_DATA_SIZE : integer := 10; -- X"00A" -- size of one FTU data block
224 constant SD_FTU_NUM : integer := 40; -- number of FTUs
225 constant SD_FTU_ACTIVE_BASE_ADDR : std_logic_vector := X"1B0"; -- beginning of active FTU lists
226 constant SD_FTU_ACTIVE_NUM : integer := 4; -- number of active FTU lists (cr0 to cr3)
227 constant SD_BLOCK_SIZE : std_logic_vector (11 downto 0) := X"1B4"; -- total size of static data block
228
229 -- dynamic data block
230 --constant DD_BLOCK_SIZE : std_logic_vector (11 downto 0) := X"010"; -- 7 + (40 * 12) = 0x1E7 --total size of dynamic data block
231 constant DD_BLOCK_SIZE : std_logic_vector (11 downto 0) := X"1E7"; -- 7 + (40 * 12) = 0x1E7 --total size of dynamic data block
232 constant DD_BLOCK_SIZE_GENERAL : integer := 7; -- dynamic block size without FTU data
233
234 -- addresses in static data block
235 constant SD_ADDR_general_settings : std_logic_vector := X"000";
236 constant SD_ADDR_led : std_logic_vector := X"001";
237 constant SD_ADDR_lp_pt_freq : std_logic_vector := X"002";
238 constant SD_ADDR_lp_pt_ratio : std_logic_vector := X"003";
239 constant SD_ADDR_lp1_amplitude : std_logic_vector := X"004";
240 constant SD_ADDR_lp2_amplitude : std_logic_vector := X"005";
241 constant SD_ADDR_lp1_delay : std_logic_vector := X"006";
242 constant SD_ADDR_lp2_delay : std_logic_vector := X"007";
243 constant SD_ADDR_coin_n_p : std_logic_vector := X"008";
244 constant SD_ADDR_coin_n_c : std_logic_vector := X"009";
245 constant SD_ADDR_trigger_delay : std_logic_vector := X"00A";
246 constant SD_ADDR_timemarker_delay : std_logic_vector := X"00B";
247 constant SD_ADDR_dead_time : std_logic_vector := X"00C";
248 constant SD_ADDR_cc_R0_HI : std_logic_vector := X"00D";
249 constant SD_ADDR_cc_R0_LO : std_logic_vector := X"00E";
250 constant SD_ADDR_cc_R1_HI : std_logic_vector := X"00F";
251 constant SD_ADDR_cc_R1_LO : std_logic_vector := X"010";
252 constant SD_ADDR_cc_R8_HI : std_logic_vector := X"011";
253 constant SD_ADDR_cc_R8_LO : std_logic_vector := X"012";
254 constant SD_ADDR_cc_R9_HI : std_logic_vector := X"013";
255 constant SD_ADDR_cc_R9_LO : std_logic_vector := X"014";
256 constant SD_ADDR_cc_R11_HI : std_logic_vector := X"015";
257 constant SD_ADDR_cc_R11_LO : std_logic_vector := X"016";
258 constant SD_ADDR_cc_R13_HI : std_logic_vector := X"017";
259 constant SD_ADDR_cc_R13_LO : std_logic_vector := X"018";
260 constant SD_ADDR_cc_R14_HI : std_logic_vector := X"019";
261 constant SD_ADDR_cc_R14_LO : std_logic_vector := X"01A";
262 constant SD_ADDR_cc_R15_HI : std_logic_vector := X"01B";
263 constant SD_ADDR_cc_R15_LO : std_logic_vector := X"01C";
264 constant SD_ADDR_coin_win_p : std_logic_vector := X"01D";
265 constant SD_ADDR_coin_win_c : std_logic_vector := X"01E";
266 constant SD_ADDR_ftu_prescaling_0 : std_logic_vector := X"029";
267 constant SD_ADDR_ftu_active_cr0 : std_logic_vector := X"1B0";
268 constant SD_ADDR_ftu_active_cr1 : std_logic_vector := X"1B1";
269 constant SD_ADDR_ftu_active_cr2 : std_logic_vector := X"1B2";
270 constant SD_ADDR_ftu_active_cr3 : std_logic_vector := X"1B3";
271 constant STATIC_RAM_ACT_FTU_OFFSET : integer := 16#1B0#;
272
273
274 -- arrays for default values
275 type sd_block_default_array_type is array (0 to (SD_BLOCK_SIZE_GENERAL - 1)) of std_logic_vector (15 downto 0);
276 type sd_block_ftu_default_array_type is array (0 to (SD_FTU_DATA_SIZE - 1)) of std_logic_vector (15 downto 0);
277 type sd_block_default_ftu_active_list_type is array (0 to (SD_FTU_ACTIVE_NUM - 1)) of std_logic_vector (15 downto 0);
278
279 -- general default values
280 -- !!! to be defined !!!
281 constant sd_block_default_array : sd_block_default_array_type := (
282 --X"0080", -- SD_ADDR_general_settings -- general settings
283 X"0060", -- SD_ADDR_general_settings -- general settings
284 X"0000", -- SD_ADDR_led -- on-board status LEDs
285 --X"0400", -- SD_ADDR_lp_pt_freq -- light pulser and pedestal trigger frequency
286 X"0001", -- SD_ADDR_lp_pt_freq -- light pulser and pedestal trigger frequency
287 --X"0001", -- SD_ADDR_lp_pt_ratio... -- ratio between LP1, LP2 and pedestal triggers
288 X"0420", -- SD_ADDR_lp_pt_ratio... -- ratio between LP1, LP2 and pedestal triggers
289 X"0004", -- SD_ADDR_lp1_amplitude -- light pulser 1 amplitude
290 X"0005", -- SD_ADDR_lp2_amplitude -- light pulser 2 amplitude
291 X"0006", -- SD_ADDR_lp1_delay -- light pulser 1 delay
292 X"0007", -- SD_ADDR_lp2_delay -- light pulser 2 delay
293 X"0001", -- SD_ADDR_coin_n_p -- majority coincidence n (for physics)
294 X"001E", -- SD_ADDR_coin_n_c -- majority coincidence n (for calibration)
295 X"0000", -- SD_ADDR_trigger_delay -- trigger delay
296 X"0000", -- SD_ADDR_timemarker_delay -- timemarker delay
297 --X"0019", -- SD_ADDR_dead_time -- dead time, 8ns + 4x25ns = 108ns
298 X"0000", -- SD_ADDR_dead_time -- dead time, 8ns + 4x25ns = 108ns
299 X"0003", -- SD_ADDR_cc_R0_HI -- clock conditioner R0 bits 31...16
300 X"8000", -- SD_ADDR_cc_R0_LO -- clock conditioner R0 bits 15...0
301 X"0001", -- SD_ADDR_cc_R1_HI -- clock conditioner R1 bits 31...16
302 X"0101", -- SD_ADDR_cc_R1_LO -- clock conditioner R1 bits 15...0
303 X"1000", -- SD_ADDR_cc_R8_HI -- clock conditioner R8 bits 31...16
304 X"0908", -- SD_ADDR_cc_R8_LO -- clock conditioner R8 bits 15...0
305 X"A003", -- SD_ADDR_cc_R9_HI -- clock conditioner R9 bits 31...16
306 X"2A09", -- SD_ADDR_cc_R9_LO -- clock conditioner R9 bits 15...0
307 X"0082", -- SD_ADDR_cc_R11_HI -- clock conditioner R11 bits 31...16
308 X"000B", -- SD_ADDR_cc_R11_LO -- clock conditioner R11 bits 15...0
309 X"020A", -- SD_ADDR_cc_R13_HI -- clock conditioner R13 bits 31...16
310 X"000D", -- SD_ADDR_cc_R13_LO -- clock conditioner R13 bits 15...0
311 X"0830", -- SD_ADDR_cc_R14_HI -- clock conditioner R14 bits 31...16
312 X"280E", -- SD_ADDR_cc_R14_LO -- clock conditioner R14 bits 15...0
313 X"1400", -- SD_ADDR_cc_R15_HI -- clock conditioner R15 bits 31...16
314 X"FA0F", -- SD_ADDR_cc_R15_LO -- clock conditioner R15 bits 15...0
315 X"0001", -- SD_ADDR_coin_win_p -- majority coincidence window (for physics), 8ns + 4x1ns = 12ns
316 X"0001", -- SD_ADDR_coin_win_c -- majority coincidence window (for calibration), 8ns + 4x1ns = 12ns
317 X"001F" -- -- Spare
318 );
319
320 -- default values for all FTUs
321 constant sd_block_ftu_default_array : sd_block_ftu_default_array_type := (
322 X"01FF", -- enables patch 0 board x crate y
323 X"01FF", -- enables patch 1 board x crate y
324 X"01FF", -- enables patch 2 board x crate y
325 X"01FF", -- enables patch 3 board x crate y
326 X"01F4", -- DAC_A board x crate y
327 X"01F4", -- DAC_B board x crate y
328 X"01F4", -- DAC_C board x crate y
329 X"01F4", -- DAC_D board x crate y
330 X"0010", -- DAC_H board x crate y
331 X"0001" -- Prescaling board x crate y
332 );
333
334 --default values for active FTU lists
335 constant sd_block_default_ftu_active_list : sd_block_default_ftu_active_list_type := (
336 X"0000",
337 X"0000",
338 X"0000",
339 X"0000"
340 );
341
342 -- Light pulser interface
343 constant low_PLC : integer := 16; -- minimal pulse duration in units of 4 ns
344 constant width_PLC : integer := 6; -- counter width pulse duration
345
346 -- Timing counter
347 -- constant tc_width : integer := 48; -- width (number of bits) of timing counter
348 -- constant zero : unsigned (tc_width - 1 downto 0) := (others => '0');
349
350 --======================================================================================
351 -- Constants for calibration and pedestal triggers generation
352 --======================================================================================
353 constant LOW_SPEED_CLOCK_FREQ : real := 50000000.0;
354 constant LOW_SPEED_CLOCK_PERIOD : real := 1.0/LOW_SPEED_CLOCK_FREQ;
355 constant MS_PERIOD : real := 0.001;
356 constant MAX_MS_COUNTER_WIDTH : integer := integer(ceil(log2(real(MS_PERIOD/LOW_SPEED_CLOCK_PERIOD))));
357 constant MAX_MS_COUNTER_VAL : integer := integer(MS_PERIOD/LOW_SPEED_CLOCK_PERIOD);
358 --======================================================================================
359
360 --======================================================================================
361 -- Constants for trigger and TIM signals width (8ns+value*4ns)
362 --======================================================================================
363 constant TRIG_SIGNAL_PULSE_WIDTH : integer range 0 to 15 := 10;
364 constant TIM_SIGNAL_PULSE_WIDTH : integer range 0 to 15 := 0;
365 --======================================================================================
366
367end ftm_constants;
Note: See TracBrowser for help on using the repository browser.