source: tags/Mars-V0.8.7pre/NEWS@ 14205

Last change on this file since 14205 was 6591, checked in by tbretz, 20 years ago
*** empty log message ***
File size: 28.1 KB
Line 
1 -*-*- END -*-*-
2 *** Version <cvs>
3
4 - Calibration is now done autmatically into equiv. photo-electrons like
5 decided by the Collaboration Board
6
7 - Reference lines in the display can be read from resource file
8
9 - Interlaced calibration events can be handled by callisto
10
11 - High-Gain vs. Low-Gain calibration constants can be calculated
12 (but not yet applied) in callisto.
13
14 - class MJCalibTest can be called by callisto
15
16 - interpolated pointing positions are now in Tree "Events" after
17 calibration
18
19 - callisto can now run with three data types: rawdata, rootdata, MC
20
21 - added two classes mreport/MReportStarguider.cc and
22 mreport/MReportStarguider.h for implementing starguider-data
23
24 - the output of merpp-update now contains starguider information:
25 MReportStarguider and MTimeStarguider
26
27 - Fixed bug in MHHadronness.cc which made that the displayed Q-factor
28 values were lower than they should. This was more visible for high
29 energy (Size) events.
30
31 - Made MExtractTimeAndChargeDigitalFilter the default for callisto
32
33 - added a new loop to callisto to support the correct extraction of
34 the pedestal and pedestal rms through the signal extractor
35
36 - added class to perform fourier tranformation of a hexagonal structure
37 (MHexagonalFT)
38
39 - added class to perform fourier tranformation of a hexagonal structure
40 in a tasklist (MHexagonalFTCalc) example: hft.C
41
42 - added class to enhance the MCerPhotEvt from the Magic camera geometry
43 MGeomCamMagic to a enhanced geometry MGeomCamMagicXT having only
44 small pixels, example: extendcam.C
45
46 - added possibility to write data to memory (TTree) using MWriteRootFile
47
48 - added possibility to read a TTree stored only in memory by MReadTree
49
50 - new classes to deal with the interleaved calibration events:
51 MTriggerPattern, MTriggerPatternDecode and MFTriggerPattern
52
53 - implemented filters to callisto to skip calibration events
54
55 - changed callisto to calculate three kinds of pedestals and pedestal rms:
56 + fundamental pedestal (MPedPhotFundamental): extracted directly from
57 the slices by statistics
58 + pedestal from extractor (MPedPhotFromExtractor): extracted with the
59 signal extractor without randomization
60 + random pedestal from extractor (MPedPhotFromExtractorRndm): extracted
61 with the signal extractor with randomization (extraction window is
62 randomly fixed)
63 The three kind of pedestal is not yet implemented (for speed reasons) as
64 long as nobody really needs it:
65 + pedestal from extractor with randomizatiuon (MPedPhotFromExtractorRndm):
66 extracted with the signal extractor with randomization
67
68 - implemented data reduction in calibrated data by reducing the precision
69 of the stored floating point values (pedestal, rms and signal) to
70 roughly 0.5%
71
72 - fixed showplot to make file format conversion (eg. converting a
73 status display stored in a root file into a postscript file) in
74 batch mode possible:
75 showplot -b --save-as-ps[=outfile.ps] infile.root
76
77 - Allow class names as part of filter rules, eg
78 (MFSupercuts) && (MHillas.fSize>100)
79
80 - fixed a lot of stuff to allow all programs to process MonteCarlo
81 camera files.
82
83 - enhanced possibility to debug reading of resource file
84
85 - MDataChain should handle priorities of operator more
86 accurate now
87
88
89
90 *** Version 0.8.6 (2004/10/05)
91
92 - New combined signal and time extractor
93 MExtractTimeAndChargeDigitalFilter
94
95 - The Report for the trigger section in the CC run summary has been
96 updated, and now the IPRs (Individual Pixel Rates) are available.
97
98 - new macros for database interaction: filldotrun.C, filldotrbk.C
99
100 - added new program which can convert colored output which was redirected
101 into a file back into colored text (for example to display it with
102 more): showlog
103
104 - added new program to display an MStatusArray of plots (stored with
105 MStatusDisplay) from a file: showplot
106
107 - Added support for Sequences (MSequence). Sequences are blocks of run
108 files containing the same calibration and belonging to the same
109 source
110
111 - Added a new task (MTaskEnv) which can be used in setup files to switch
112 between different tasks (for example to choose a signal extractor)
113
114 - Implemented automatic file splitting in MWriteRootFile
115
116 - After image cleaning an island index is assigned to all used pixels.
117 The index corresponds to the order of the islands in size.
118
119 - added a cleaning which takes signal height _and_ arrival time into
120 account: probability cleaning (for more details see MImgCleanStd)
121
122 - added a cleaning which takes takes the absolute number of photons
123 times the area ratio as cleaning level
124 (for more details see MImgCleanStd)
125
126 - Changed calculation of image parameters such, that it can be done
127 for all used pixels or the pixels with a defined island index only
128
129 - implemented new image parameters displaying the number of islands,
130 saturated hi-gain and lo-gain pixels (MImagePar, MHImagePar)
131
132 - event display in executable changed to support also calibrated files
133 (done with MJCalibrateSignal)
134
135 - added program doing the calibration and the signal extraction
136 and signal calibration: callisto Most part of the setup is done
137 by a resource file: callisto.rc
138
139 - implemented support for pixels with negative IDs (Raw file format
140 version 4)
141
142 - implemented an new option in merpp (--auto-time) to get the time
143 range for cc and/or caco data from the run header of the raw data
144
145 - New star-program (star and MJStar). Taking calibrated data from
146 callisto/MJCalibrateSignal as input. The setup is done through
147 a resource file: star.rc
148
149 - Added possibility to setup the eventloop in the mars-executable
150 Camera Display by a resource file: mars.rc
151
152 - The the mars-executable Camera Display can now also read
153 calibrated data files written by callisto/MJCalibrateSignal
154
155 - Added a new class which can calculate the source position in
156 the camera from a pointing model known to be correct and
157 the pointing model used for observations (MSrcPosFromModel)
158
159 - added a new version of the class calculating the effective on-time
160 MHEffectiveOnTime. It unifies the old classes MHEffOnTime,
161 MHEffOnTimeTime, MHEffOnTimeTheta, MHTimeDiff, MHTimeDiffTime and
162 MHTimeDiffTheta.
163
164 - added the possibility to count how often a signal is above (or
165 below) a certain threshold in MHCamEvent and MHCamEventRot (this
166 can replace MHTriggerLvl0)
167
168 - added ore convinient ways to set the axis-titles of your histograms
169 in your macro to some MH-classes like: MH3, MHVsTime, MHSectorVsTime,
170 MHPixVsTime, MHVsTime, MHCamEvent and MHCamEventRot
171
172
173
174 *** Version 0.8.5 (2004/08/06)
175
176 - new Signal Extractors: MExtractFixedWindowSpline
177 and MExtractAmplitudeSpline
178
179 - implementes interleave in merpp to be able to merpp parts of a file
180
181 - implemented force-functionality to merpp
182
183 - star display to display star catalogs (MAstroCatalog)
184
185 - star display to 'mirror' stars to the camera (MAstroCamera)
186
187 - implemented a new cleaning option which allows cleaning scaled with
188 the real ratio of the rms depending on the pixel size, not only the
189 square root of the pixelsize (MImgCleanStd, MCameraData)
190
191 - removed obsolete MBlind* classes
192
193 - Signal extractor taking the AB flag into account implemented (this makes
194 an odd number of slices for signal extraction possible
195 (MExtractSignalABcorr)
196
197 - implemented a class extracting the pedestal from the raw-data (events)
198 itself using empty lo-gain (MpedCalcFromLoGain)
199
200 - Added mean values to MPedPhotCam
201
202 - Added Makefile for Darwin (this OS is NOT officially supported!)
203
204
205
206 *** Version 0.8.4 (2004/04/19)
207
208 - new fast arrival time extractor using cubic splines:
209 MExtractTimeFastSpline
210
211 - implementes multi-argument support in MDataChain
212 ("pow(a, b)")
213
214 - implemented double reference support in MDataChain
215 ("MCameraLV.fPowerSupplyA.fVoltagePos5V")
216
217 - added support in MF for expressiond like
218 "MHillas.fWidth<2*<MHillas.fLength"
219
220 - MDataChain is now able to support variables like [0], [1], ...
221 which can be used in fit functions as parameters. The interface
222 is implemented through the new virtual function
223 MParContainer::SetVariables
224
225 - added new class MArrivalTimeCam/MArrivalTimePix:
226 Storage containers to hold the ArrivalTime of the camera/pixel
227
228 - added new classes for the calibration of relative arrival times:
229 MCalibrationRelTimePix and MCalibrationRelTimeCam
230
231 - added new classes to extract the signal of the blind pixel and the
232 PIN Diode separately: MExtractBlindPixel and MExtractPINDiode
233
234 - added new classes for the bad-pixels treatment (MBadPixels*)
235 which are more powerfull than the old ones (MBlindPixel*)
236 and will replace them.
237
238 - added filter against cosmics: MFCosmics
239
240 - added new class MArrivalTimeCalc2:
241 Calculates the arrival time as the signal weighted mean of the time
242 slices in the maximum window
243
244 - added a new macro call pointspreadfucntion.C that fits with a 2D
245 gaussian the DC spot for an star. It gives you the RMS of
246 the PSF and the center of the star, very useful for misspointing
247 studies.
248
249 - added support for multi-telescope camera files. Added classes
250 MStereoCalc and MStereoPar, classes to calculate and store shower
251 parameters calculated from the data of two telescopes, for the MC
252 studies regarding the MAGIC clone.
253
254 - added MMcCalibrationCalc, MMcCalibrationUpdate, classes to obtain
255 MC data calibrated in photons instead of ADC counts.
256
257 - added three macros to show the calibration and analysis chain of
258 MC data. The macro starmc.C does both calibration and analysis, producing
259 an output containing Hillas parameters for each event. The macro
260 mccalibrate.C does just the calibration and writes out a file containing
261 pixel information in photons instead of FADC data. The macro starmc2.C
262 reads in such a file and produces an output with Hillas parameters.
263
264 - added MPedPhotCalc to compute pedestals in units of photons, see
265 macro pedphotcalc.C
266
267 - added all class to perform the calibration, see macro calibration.C
268
269 - added class MFFT to perform Fast Fourier Transforms
270
271 - added class MSimulatedAnnealing to perform simulated annealing
272 minimizations
273
274 - added new macro bootcampstandardanalysis.C which holds the skeleton
275 of the analysis chain discussed in the december bootcamp.
276
277 - added support for DAQ raw data file format V2
278
279 - implemented an arbitrary time stamp for the events from raw-data
280 files with file version<3. It is calculated from the run number,
281 the date of start and the FADC clock tick from the first module
282
283 - implemented the correct decoding of the event time-stamp
284 coming from the DAQ for raw-data files with file-version>2
285
286 - added a new classes storing the pedestals in units of photons:
287 MPedPhotPix, MPedPhotCam
288
289 - added support for DC current files from the camera control
290
291 - added support for start- and stop-time when merpping report files
292
293 - added MReportCC storing the weather data from the CC-REPORT
294
295 - added class to fill trainings and test matrices (MTFillMatrix)
296
297 - added a filter performing a software trigger (MFSoftwareTrigger)
298
299 - Added classes to perform parts of the standard analysis (Jobs):
300 + MJPedestals
301 + MJCalibration
302 + MJExtractSignal
303 Note: All of them are preliminary!
304
305 - Added Iterator to iterate over files giving only the run-number
306
307 - Added class (MHSectorVsTime) and example (sectorvstime.C) to plot
308 the evolution of a sector vs time
309
310
311
312 *** Version 0.8.3 (2003/12/05)
313
314 - adapted Random Forest classes to allow the use with MC
315 multi-telescope files which can be produced with the coming
316 camera version 0.7.
317
318 - added classes to read and interprete central control report files
319 (Directory: mreport, Base-Class: MReport, Reader: MReportFileRead, ...)
320
321 - enhanced merpp (the executable) to support .raw and .rep files.
322
323 - added classes for light calibration (MCalibration* and
324 MHCalibration*) by Markus Gaug. Further work has to be and will
325 be done soon.
326
327 - Added a preliminary 'synchronizer' (MReadReports) which will
328 replace MReadMarsFile as soon as it is finished.
329
330 - Added a tutorial macro demonstrating how report files are merpped
331 and how they can be read from the root file in the correct order
332 of time (readrep.C)
333
334 - Added a generalized histogram (similar to MH3) called MVsTime
335 which allows to plot variables (or rules - MDataChain - of
336 variables) vs time. For an example have a look at tempvstime.C.
337
338 - Changed the name of the event trees:
339 + Events --> Events
340 + PedEvents --> Pedestals
341 + CalEvents --> Calibration
342
343 - changed name of MTime in the event trees from MRawEvtTime to MTime
344
345 - added displaying the sector indices to the mars event display
346
347 - Magic Online Analysis (MOnA) implemented in a first version
348 (see mona.cc, MOnlineDump and MOnlineDisplay)
349
350 - added classes to calculate event rate
351 (preliminary: MEventRateCalc, MEventRate)
352
353 - added new executable 'readdaq' to read *.raw files from the DAQ directly
354
355 - added classes dealing with the telescope pointing position (MPointing*)
356
357 - implemented the 'final' Mars time stamp based on some experiences with
358 the new 'Synchonizer'
359
360
361
362 *** Version 0.8.2 (2003/11/10)
363
364 - accelerated standard analysis by a factor of 6-8 ...
365 + doing precalculations in MGeomCam for the pixel area ratio
366 + creating a look up table for the single pixels in MCerPhotEvt
367
368 - added task to calculates weights in case you want to 'change'
369 the energy spectrum of a monte carlo file
370 (MMcWeightEnergySpecCalc - Great work from Marcos Lopez Moya)
371
372 - added a new executable star which implements the
373 star.C macro as precompiled executable. Currently a flexible
374 setup is not possible, but a 'input card' setup will follow.
375
376 - Starting to implement Multi-Telescope-Support based on the
377 upcomming camera version 0.7. The base for a general support
378 is implemented and the star-functionality is proven to work.
379
380 - Replaced Event-Display in and Camera-Display in the Mars GUI
381 executable by a more convinient display base on MStatusDisplay.
382
383 - fixed the algorithm for the blind pixel treatment (MBlindPixelCalc)
384
385
386
387 *** Version 0.8.1 (2003/10/20)
388
389 - added signal subtraction for pure on data by means of fitting
390 the background in the off region or by performing a combined
391 signal/background fit. Provides necessary histograms for
392 obtaining energy spectra and a light curve.
393
394 - added classes to perform and study the selection of the
395 2nd Level Trigger on MC data (example in triglvl2.C macro)
396
397 - added pedestal calculation
398
399 - implemented "democratic cleaning" (tail cut value proportional
400 to pixel area) according to Wolfgang's suggestion.
401
402 - added Sigmabar treatment (calculation and basic histogramming)
403
404 - added basic routines to apply padding
405
406 - added first implementation of MARS-based source visibility plotter
407 (needs to be linked against slalib, preliminary version)
408
409 - enhanced functionality of data chains: random numbers, conversion
410 functions and access to MHMatrix objects
411
412 - fixed some bugs in the CT1 Preproc file reader, which gave wrong
413 numbers under certain circumstances (runs with 0 events included)
414
415 - fixed a bug in the general filter MF (didn't work on some systems
416 at all)
417
418 - fixed a bug in chaining files, which caused the analysis to crash or
419 ignore files
420
421 - implemented more geometry classes describing the parameters used
422 to simulate the PMT camera
423
424 - added new Monte Carlo classes containing the setup of the different
425 programs in the MC chain.
426
427 - added a (preliminary) general task to evaluate chi-square of a given
428 parameter in an eventloop.
429
430 - first implementation of a container describing the observatory
431 location (Long, Lat, etc)
432
433 - added Random Forest - method for g/h-separation
434
435 - made compatible with the latest PRO version of root (3.04/02 and 3.05/07)
436 (this means, that it is compiling, but not yet fully tested)
437
438 - added a new status display which can show the present status
439 of histograms while an eventloop is running (MStatusDisplay,
440 an example can be found at status.C)
441
442 - reorganized directories:
443 classes describing the image --> mimage
444 classes containing Monte Carlo Histograms --> mhistmc
445 classes for Random Forest method --> mranforest
446
447 - added (event-)weights to fill histograms
448
449 - colors in logging output to screen
450
451 - changes to the Image Parameter declaration:
452 + moved fConc, fConc1 from MHillasSrc to MNewImagePar
453 + moved fNumUsedPix, fNumCorePix from MHillas to MNewImagePar
454 + MHillasExt now derives from MParContainer instead of MHillas
455 --> Files written with the old definition are more or less unreadable
456
457 - reading of reflector files
458
459 - display data from reflector files in the camera
460
461 - implemented currents (and display them in the camera)
462
463 - logarithmic scale in camera
464
465 - added class to iterate through directory contents (MDirIter)
466
467
468
469 *** Version 0.8 (2002/11/18)
470
471 - added all subdirectories as Include-Paths for ACLIC (s. rootlogon.C)
472
473 - corrected 48(!) wrong entries in the Next Neighbor table of the
474 Magic Camera (all in the inner part of the outer ring, mostly
475 missing a single NN)
476
477 - Fixed a bug in the table describing the Next Neighbours of the
478 CT1 camera (a pixel 127 doesn't exist and the pixel 126 didn't
479 have any neighbour)
480
481 - changed trigrate.C: now it calculates the pure NSB triggers from
482 a camera file (generated with no showers), so there is no need
483 to introduce them by hand in the BgR array (for more details
484 please ask Abelardo)
485
486 - added MHHadronness (and MHadronness) as a general facility to evaluate
487 the quality of a gamma-hadron seperation method
488
489 - changed MWriteAsciiFile to accept rules (MDataChain)
490
491 - Calls to MWriteAsciiFile::AddContainer and MWriteAsciiFile::AddRule
492 must be replaced by calles to MWriteAsciiFile::AddColumn and
493 MWriteAsciiFile::AddColumns. Be carefull, the arguments have slightly
494 changed.
495
496 - Implemented generalized event-matrices (one row per event)
497 (MHMatrix)
498
499 - implemented the one dimensional composite probabilities
500 (MHCompProb, MCompProbCalc, comprob.C)
501
502 - implemented the Multidimensional Distances (Next Neighbours, Kernel)
503 (MMultiDimDistCalc, multidimdist.C, multidimdist2.C, MHMatrix)
504
505 - Added a camera display displaying the pixel numbers to the
506 event display gui.
507
508 - Added Monte Carlo Informations to event display gui
509
510 - Changed the camera display to display the pixel numbering
511
512 - Added three buttons to the camera display to change the palette
513
514 - Added the number of used and core pixels after image cleaning
515 to MHillas
516
517 - Changed the algorithm used in MHillas according to TDAS 02-03
518
519 - Changed the Alpha range according to TDAS 02-03 to [-90°,90°]
520
521 - Changed the algorithm used in MHillasSrc according to TDAS 02-03
522
523 - Added fCosDeltaAlpha to MHillasSrc
524
525 - The numbers of photons used to calculate fConc and fConc1 in
526 MHillasExt are now scaled with the pixel size, so that one get
527 a four times smaller value for the bigger pixels in the outer ring.
528
529 - added new task to smooth the camera contents (MCameraSmooth)
530
531 - added possibility to use interpolated pixel values for blind pixels
532 instead of removing it completely from the analysis
533
534 - Implemented the possibility to save the whole eventloop with
535 its setup to a file. This information can be read and from
536 it you can (re)create a Macro. See MEvtLoop::Read, MEvtLoop::Write
537 and MEvtLoop::MakeMacro. If you find something not working, please
538 report - this stuff is still in a beta phase.
539
540 - MBlindPixelCalc set all Ceta-Tauri pixels to unused not only for the
541 file having crab starfield, but also for all following files - fixed
542
543 - MTaskList::PrintStatistics can now be instructud to print also the
544 title, too: use PrintStatistics(0, kTRUE)
545
546 - Changed the image cleaning so that pixels with to many 'used'
547 neighbors are left used (to get rid of 'holes' in events)
548
549 - Introduced more output to the camera displays
550
551 - Added an array of histograms (eg one hist per run), MHArray
552
553 - Added a _preliminary_ version of the reader for CT1 PreProc files
554 (MCT1ReadPreProc)
555
556 - Fixed the error calculation of MHMCollectionArea and MHMcIntRate
557 (thanks to Raquel)
558
559 - added the first energy estimator (MEnergyEstParam, estimate.C,
560 estfit.C) using a parametrization
561
562 - Added some new Monte Carlo paremeter containers used to store
563 setup information from the MC chain (MMcConfigRunHeader,
564 MMcCorsikaRunHeader, MGeomPMT, MGeomMirror)
565
566
567
568 *** Version 0.7 (2002/04/30)
569
570 - added a bugfix to MCerPhotCalc. In older camera versions (<=40)
571 the pedestal mean value was saved incorrectly. For files from
572 this versions we substract 0.5 from the pedestal mean.
573 WARNING: This may effect your results, so don't wonder...
574
575 - First implementation of an algorithm using only triggered events
576 for the collection area calculation
577
578 - Ascii Output can now also be used for parameter containers which
579 doesn't overload MParCointainer::AsciiWrite
580
581 - The Ascii Output is now also capable of writing single data members
582 of one container
583
584 - You are now able to change the order of the values written to the
585 ascii file
586
587 - You can now specify a conversion factor for each data member written
588 to an ascii file. This may be usefull to change the units of the
589 data member (eg. degrees instead of millimeters in case of the
590 hillas parameters)
591
592 - Replaced old MHillas by a new structure which allows you to extend
593 the parameters stored in MHillas very easily:
594 see MHillas and MHillasExt
595
596 - Added classes to handle source dependancy of image parameters:
597 see MHillasSrc
598
599 - Added container (MBinning) to have a standard input for the binning
600 in different histograms (eg. the Energy bins should be the same in
601 all histograms)
602
603 - Changed Hillas histograms from mm to deg
604
605 - Added the flexible binning to the hillas histograms
606
607 - Added a filter for the alpha parameter (MFAlpha)
608
609 - It is now possible to write single data members of a class object to
610 an output stream instead of the whole container only
611
612 - Added a generalized filter for a data member:
613 MFDataMember filter("MHillas.fWidth", '<', 0.5);
614
615 - Added a generalized Filter parser for more difficult filter rules
616 MF filter("MHillas.fWidth<0.5 && MHillas.fLength>0.5");
617
618 - Added new Monte Carlo histograms:
619 MHMcEnergyImpact and MHMcEfficiency
620
621 - Added many new histograms needed for the flux calculation.
622
623 - Added a generalized histograms which can fill and show up to three
624 data members in either a one-, two- or three-dimensional histogram, eg:
625 MH3 mh3("MHillas.fWidth", "MHillas.fLength");
626
627 - Added:
628 * calculation of <Theta> as a function of Theta (MHThetabarTheta)
629 * calculation of <Theta> as a function of time (MHThetabarTime)
630 they are needed in the flux calculation in
631 order to select for a given bin in Theta (or time) the appropriate
632 effective collection area, which is assumed to be given as a function
633 of Theta and the true energy
634
635 - Added calculation of the migration matrix in the energy
636 (MHMcEnergyMigration):
637 the migration matrix describes the migration from the true (E_true)
638 to the estimated energy (E_est); it is needed to determine the
639 distribution of E_true from the measured distribution of E_est
640 by unfolding
641
642 - changed the color palette in the camera display to DeapSea.
643
644
645
646 *** Version 0.6 (2002/01/15)
647
648 - Introduce the option of disable pixels (MBlindPixels and
649 MBlindPixelCalc) for the analysis (eg MHillasCalc) to be
650 able to deal with Star Field NSB.
651
652 - Fixed a bug in the pedestals substraction
653
654 - Introduced verbosity levels
655
656 - Introduced a task (MReadMarsFile) which reads the RunHeader tree, too.
657
658 - Fixed several bugs in MFTriggerLvl1 which caused to filter not to
659 work correctly (thanks to Abelardo)
660
661 - Introduced correct treatment of the diffuse Night Sky Background
662 and NSB (MMcPedestalNSB)
663
664 - Corrected treatment of the electronic noise (MMcPedestalCopy)
665
666 - Introduced MMcRunHeaders which contains monte carlo run informations
667
668 - Added a 'Print'-Task (MPrint) which calls the Print function
669 of a parameter container for each event
670
671 - Removed MHtml (was replaced by THtml of root 3.02) in dohtml.C
672
673 - changes to be more efficient with root 3.02/06
674
675 - root 3.02/06 fixes:
676 + the memory leak when reading MRawEvtData
677 + loosing more time than necessary to update the progress bar
678
679 - MWriteAsciiFile is now capable of writing more than one container
680 in a line. For example: To be able to write Monte Carlo and
681 Hillas values (energy and alpha) in one line.
682
683
684
685 *** Version 0.5 (2001/11/06)
686
687 - Added new GUI functionality (Analysis)
688
689 - Added a camera display to be able to display events in the camera
690 together with the calculated hillas ellipse
691
692 - Added a 'Clone'-Task (MClone) which can clone a parameter container
693 object at any state of the analysis, so that the output are several
694 states
695
696 - Fixed a bug in the collection area error calculation
697 (Thanks to Ciro and Abelardo)
698
699 - Fixed a bug which causes merpp to crash in some environments
700
701 - Implemented auto enabling scheme for Branches to speed up reading
702 a lot (see MReadTree and MTask)
703
704 - Fixed a bug in the Histogram classes which caused histograms to
705 be written to a file by MWriteRootFile without request
706
707 - changed the object I/O from the old stylish root I/O to the new
708 'auto evolution scheme' This was done only for classes which are not
709 yet used in Monte Carlo files, so that these files are still readable.
710
711 - Added support for a progress bar in MEvtLoop and MReadTree
712 (see the Analysis Window in Mars for an example)
713
714 - Fixed a bug in the package creation which disturbed the conversion
715 between a mars version unpacked from a tar file and the repository.
716
717 - Changed the code to writer merpped (converted into root format)
718 raw files, to get faster (around 10%)
719
720
721
722 *** Version 0.4 (2001/09/20)
723
724 - This release is made to compile on a root version >= 3.00
725
726 - Fixed a bug which causes MReadTree to read the first file only
727
728 - Added a task to compute the trigger rate (MMcTriggerRateCalc)
729
730 - Added a task to write a container to an Ascii file (MWriteAsciiFile)
731
732 - Added a task to write several container to a root file (MWriteRootFile)
733
734 - Added calculation of the Enegry Threshold (MMcThresholdCalc)
735
736 - Added calculation of the collection area (MMcCollectionAreaCalc)
737
738 - fixed some bugs in the Hillas calculation
739
740 - added filters to be able to control the task execution dependent on
741 a parameter (for example: the number of level 1 triggers in a MC-file)
742
743
744
745 *** Version 0.3 (2001/04/23)
746
747 - Many demo macros added
748
749 - MCT1ReadAscii is now able to handle more than one file (s. ::AddFile)
750
751 - Hillas Calculation added
752
753 - Standard image cleaning available
754
755 - MReadTree is now able to handle more than one file
756 (Remark: of the same structure)
757
758 - Now we are able to display events in a first version of the
759 Camera event display. To do this we must run the macro
760 "macros/readCT1.C" to read data from CT1.
761
762
763
764 *** Version 0.2 (2001/01/24)
765
766 - First Implementation of a Gui to read the raw data. Start the
767 gui with the command mars.
768
769
770
771 *** Version 0.1 (2000/12/20)
772
773 - First official release 0.1
774
775 - Changes:
776
777 + changed calling style of MRawPixelIterator from do...while to
778 while-loop
779
Note: See TracBrowser for help on using the repository browser.