1 | -*-*- END -*-*-
|
---|
2 | *** Version <cvs>
|
---|
3 |
|
---|
4 | - Calibration is now done autmatically into equiv. photo-electrons like
|
---|
5 | decided by the Collaboration Board
|
---|
6 |
|
---|
7 | - Reference lines in the display can be read from resource file
|
---|
8 |
|
---|
9 | - Interlaced calibration events can be handled by callisto
|
---|
10 |
|
---|
11 | - High-Gain vs. Low-Gain calibration constants can be calculated
|
---|
12 | (but not yet applied) in callisto.
|
---|
13 |
|
---|
14 | - class MJCalibTest can be called by callisto
|
---|
15 |
|
---|
16 | - interpolated pointing positions are now in Tree "Events" after
|
---|
17 | calibration
|
---|
18 |
|
---|
19 | - callisto can now run with three data types: rawdata, rootdata, MC
|
---|
20 |
|
---|
21 | - added two classes mreport/MReportStarguider.cc and
|
---|
22 | mreport/MReportStarguider.h for implementing starguider-data
|
---|
23 |
|
---|
24 | - the output of merpp-update now contains starguider information:
|
---|
25 | MReportStarguider and MTimeStarguider
|
---|
26 |
|
---|
27 | - Fixed bug in MHHadronness.cc which made that the displayed Q-factor
|
---|
28 | values were lower than they should. This was more visible for high
|
---|
29 | energy (Size) events.
|
---|
30 |
|
---|
31 | - Made MExtractTimeAndChargeDigitalFilter the default for callisto
|
---|
32 |
|
---|
33 | - added a new loop to callisto to support the correct extraction of
|
---|
34 | the pedestal and pedestal rms through the signal extractor
|
---|
35 |
|
---|
36 | - added class to perform fourier tranformation of a hexagonal structure
|
---|
37 | (MHexagonalFT)
|
---|
38 |
|
---|
39 | - added class to perform fourier tranformation of a hexagonal structure
|
---|
40 | in a tasklist (MHexagonalFTCalc) example: hft.C
|
---|
41 |
|
---|
42 | - added class to enhance the MCerPhotEvt from the Magic camera geometry
|
---|
43 | MGeomCamMagic to a enhanced geometry MGeomCamMagicXT having only
|
---|
44 | small pixels, example: extendcam.C
|
---|
45 |
|
---|
46 | - added possibility to write data to memory (TTree) using MWriteRootFile
|
---|
47 |
|
---|
48 | - added possibility to read a TTree stored only in memory by MReadTree
|
---|
49 |
|
---|
50 | - new classes to deal with the interleaved calibration events:
|
---|
51 | MTriggerPattern, MTriggerPatternDecode and MFTriggerPattern
|
---|
52 |
|
---|
53 | - implemented filters to callisto to skip calibration events
|
---|
54 |
|
---|
55 | - changed callisto to calculate three kinds of pedestals and pedestal rms:
|
---|
56 | + fundamental pedestal (MPedPhotFundamental): extracted directly from
|
---|
57 | the slices by statistics
|
---|
58 | + pedestal from extractor (MPedPhotFromExtractor): extracted with the
|
---|
59 | signal extractor without randomization
|
---|
60 | + random pedestal from extractor (MPedPhotFromExtractorRndm): extracted
|
---|
61 | with the signal extractor with randomization (extraction window is
|
---|
62 | randomly fixed)
|
---|
63 | The three kind of pedestal is not yet implemented (for speed reasons) as
|
---|
64 | long as nobody really needs it:
|
---|
65 | + pedestal from extractor with randomizatiuon (MPedPhotFromExtractorRndm):
|
---|
66 | extracted with the signal extractor with randomization
|
---|
67 |
|
---|
68 | - implemented data reduction in calibrated data by reducing the precision
|
---|
69 | of the stored floating point values (pedestal, rms and signal) to
|
---|
70 | roughly 0.5%
|
---|
71 |
|
---|
72 | - fixed showplot to make file format conversion (eg. converting a
|
---|
73 | status display stored in a root file into a postscript file) in
|
---|
74 | batch mode possible:
|
---|
75 | showplot -b --save-as-ps[=outfile.ps] infile.root
|
---|
76 |
|
---|
77 | - Allow class names as part of filter rules, eg
|
---|
78 | (MFSupercuts) && (MHillas.fSize>100)
|
---|
79 |
|
---|
80 | - fixed a lot of stuff to allow all programs to process MonteCarlo
|
---|
81 | camera files.
|
---|
82 |
|
---|
83 | - enhanced possibility to debug reading of resource file
|
---|
84 |
|
---|
85 | - MDataChain should handle priorities of operator more
|
---|
86 | accurate now
|
---|
87 |
|
---|
88 | - completely revised the container in which the signal is stored
|
---|
89 | MCerPhotEvt/Pix, MArrivalTime --> MSignalCam/Pix
|
---|
90 | * the new implementation is faster and
|
---|
91 | * needs less storage space
|
---|
92 |
|
---|
93 | - FIRST version which can process Monte Carlos through the
|
---|
94 | whole chain of programs (callisto, star, etc)
|
---|
95 |
|
---|
96 |
|
---|
97 |
|
---|
98 | *** Version 0.8.6 (2004/10/05)
|
---|
99 |
|
---|
100 | - New combined signal and time extractor
|
---|
101 | MExtractTimeAndChargeDigitalFilter
|
---|
102 |
|
---|
103 | - The Report for the trigger section in the CC run summary has been
|
---|
104 | updated, and now the IPRs (Individual Pixel Rates) are available.
|
---|
105 |
|
---|
106 | - new macros for database interaction: filldotrun.C, filldotrbk.C
|
---|
107 |
|
---|
108 | - added new program which can convert colored output which was redirected
|
---|
109 | into a file back into colored text (for example to display it with
|
---|
110 | more): showlog
|
---|
111 |
|
---|
112 | - added new program to display an MStatusArray of plots (stored with
|
---|
113 | MStatusDisplay) from a file: showplot
|
---|
114 |
|
---|
115 | - Added support for Sequences (MSequence). Sequences are blocks of run
|
---|
116 | files containing the same calibration and belonging to the same
|
---|
117 | source
|
---|
118 |
|
---|
119 | - Added a new task (MTaskEnv) which can be used in setup files to switch
|
---|
120 | between different tasks (for example to choose a signal extractor)
|
---|
121 |
|
---|
122 | - Implemented automatic file splitting in MWriteRootFile
|
---|
123 |
|
---|
124 | - After image cleaning an island index is assigned to all used pixels.
|
---|
125 | The index corresponds to the order of the islands in size.
|
---|
126 |
|
---|
127 | - added a cleaning which takes signal height _and_ arrival time into
|
---|
128 | account: probability cleaning (for more details see MImgCleanStd)
|
---|
129 |
|
---|
130 | - added a cleaning which takes takes the absolute number of photons
|
---|
131 | times the area ratio as cleaning level
|
---|
132 | (for more details see MImgCleanStd)
|
---|
133 |
|
---|
134 | - Changed calculation of image parameters such, that it can be done
|
---|
135 | for all used pixels or the pixels with a defined island index only
|
---|
136 |
|
---|
137 | - implemented new image parameters displaying the number of islands,
|
---|
138 | saturated hi-gain and lo-gain pixels (MImagePar, MHImagePar)
|
---|
139 |
|
---|
140 | - event display in executable changed to support also calibrated files
|
---|
141 | (done with MJCalibrateSignal)
|
---|
142 |
|
---|
143 | - added program doing the calibration and the signal extraction
|
---|
144 | and signal calibration: callisto Most part of the setup is done
|
---|
145 | by a resource file: callisto.rc
|
---|
146 |
|
---|
147 | - implemented support for pixels with negative IDs (Raw file format
|
---|
148 | version 4)
|
---|
149 |
|
---|
150 | - implemented an new option in merpp (--auto-time) to get the time
|
---|
151 | range for cc and/or caco data from the run header of the raw data
|
---|
152 |
|
---|
153 | - New star-program (star and MJStar). Taking calibrated data from
|
---|
154 | callisto/MJCalibrateSignal as input. The setup is done through
|
---|
155 | a resource file: star.rc
|
---|
156 |
|
---|
157 | - Added possibility to setup the eventloop in the mars-executable
|
---|
158 | Camera Display by a resource file: mars.rc
|
---|
159 |
|
---|
160 | - The the mars-executable Camera Display can now also read
|
---|
161 | calibrated data files written by callisto/MJCalibrateSignal
|
---|
162 |
|
---|
163 | - Added a new class which can calculate the source position in
|
---|
164 | the camera from a pointing model known to be correct and
|
---|
165 | the pointing model used for observations (MSrcPosFromModel)
|
---|
166 |
|
---|
167 | - added a new version of the class calculating the effective on-time
|
---|
168 | MHEffectiveOnTime. It unifies the old classes MHEffOnTime,
|
---|
169 | MHEffOnTimeTime, MHEffOnTimeTheta, MHTimeDiff, MHTimeDiffTime and
|
---|
170 | MHTimeDiffTheta.
|
---|
171 |
|
---|
172 | - added the possibility to count how often a signal is above (or
|
---|
173 | below) a certain threshold in MHCamEvent and MHCamEventRot (this
|
---|
174 | can replace MHTriggerLvl0)
|
---|
175 |
|
---|
176 | - added ore convinient ways to set the axis-titles of your histograms
|
---|
177 | in your macro to some MH-classes like: MH3, MHVsTime, MHSectorVsTime,
|
---|
178 | MHPixVsTime, MHVsTime, MHCamEvent and MHCamEventRot
|
---|
179 |
|
---|
180 |
|
---|
181 |
|
---|
182 | *** Version 0.8.5 (2004/08/06)
|
---|
183 |
|
---|
184 | - new Signal Extractors: MExtractFixedWindowSpline
|
---|
185 | and MExtractAmplitudeSpline
|
---|
186 |
|
---|
187 | - implementes interleave in merpp to be able to merpp parts of a file
|
---|
188 |
|
---|
189 | - implemented force-functionality to merpp
|
---|
190 |
|
---|
191 | - star display to display star catalogs (MAstroCatalog)
|
---|
192 |
|
---|
193 | - star display to 'mirror' stars to the camera (MAstroCamera)
|
---|
194 |
|
---|
195 | - implemented a new cleaning option which allows cleaning scaled with
|
---|
196 | the real ratio of the rms depending on the pixel size, not only the
|
---|
197 | square root of the pixelsize (MImgCleanStd, MCameraData)
|
---|
198 |
|
---|
199 | - removed obsolete MBlind* classes
|
---|
200 |
|
---|
201 | - Signal extractor taking the AB flag into account implemented (this makes
|
---|
202 | an odd number of slices for signal extraction possible
|
---|
203 | (MExtractSignalABcorr)
|
---|
204 |
|
---|
205 | - implemented a class extracting the pedestal from the raw-data (events)
|
---|
206 | itself using empty lo-gain (MpedCalcFromLoGain)
|
---|
207 |
|
---|
208 | - Added mean values to MPedPhotCam
|
---|
209 |
|
---|
210 | - Added Makefile for Darwin (this OS is NOT officially supported!)
|
---|
211 |
|
---|
212 |
|
---|
213 |
|
---|
214 | *** Version 0.8.4 (2004/04/19)
|
---|
215 |
|
---|
216 | - new fast arrival time extractor using cubic splines:
|
---|
217 | MExtractTimeFastSpline
|
---|
218 |
|
---|
219 | - implementes multi-argument support in MDataChain
|
---|
220 | ("pow(a, b)")
|
---|
221 |
|
---|
222 | - implemented double reference support in MDataChain
|
---|
223 | ("MCameraLV.fPowerSupplyA.fVoltagePos5V")
|
---|
224 |
|
---|
225 | - added support in MF for expressiond like
|
---|
226 | "MHillas.fWidth<2*<MHillas.fLength"
|
---|
227 |
|
---|
228 | - MDataChain is now able to support variables like [0], [1], ...
|
---|
229 | which can be used in fit functions as parameters. The interface
|
---|
230 | is implemented through the new virtual function
|
---|
231 | MParContainer::SetVariables
|
---|
232 |
|
---|
233 | - added new class MArrivalTimeCam/MArrivalTimePix:
|
---|
234 | Storage containers to hold the ArrivalTime of the camera/pixel
|
---|
235 |
|
---|
236 | - added new classes for the calibration of relative arrival times:
|
---|
237 | MCalibrationRelTimePix and MCalibrationRelTimeCam
|
---|
238 |
|
---|
239 | - added new classes to extract the signal of the blind pixel and the
|
---|
240 | PIN Diode separately: MExtractBlindPixel and MExtractPINDiode
|
---|
241 |
|
---|
242 | - added new classes for the bad-pixels treatment (MBadPixels*)
|
---|
243 | which are more powerfull than the old ones (MBlindPixel*)
|
---|
244 | and will replace them.
|
---|
245 |
|
---|
246 | - added filter against cosmics: MFCosmics
|
---|
247 |
|
---|
248 | - added new class MArrivalTimeCalc2:
|
---|
249 | Calculates the arrival time as the signal weighted mean of the time
|
---|
250 | slices in the maximum window
|
---|
251 |
|
---|
252 | - added a new macro call pointspreadfucntion.C that fits with a 2D
|
---|
253 | gaussian the DC spot for an star. It gives you the RMS of
|
---|
254 | the PSF and the center of the star, very useful for misspointing
|
---|
255 | studies.
|
---|
256 |
|
---|
257 | - added support for multi-telescope camera files. Added classes
|
---|
258 | MStereoCalc and MStereoPar, classes to calculate and store shower
|
---|
259 | parameters calculated from the data of two telescopes, for the MC
|
---|
260 | studies regarding the MAGIC clone.
|
---|
261 |
|
---|
262 | - added MMcCalibrationCalc, MMcCalibrationUpdate, classes to obtain
|
---|
263 | MC data calibrated in photons instead of ADC counts.
|
---|
264 |
|
---|
265 | - added three macros to show the calibration and analysis chain of
|
---|
266 | MC data. The macro starmc.C does both calibration and analysis, producing
|
---|
267 | an output containing Hillas parameters for each event. The macro
|
---|
268 | mccalibrate.C does just the calibration and writes out a file containing
|
---|
269 | pixel information in photons instead of FADC data. The macro starmc2.C
|
---|
270 | reads in such a file and produces an output with Hillas parameters.
|
---|
271 |
|
---|
272 | - added MPedPhotCalc to compute pedestals in units of photons, see
|
---|
273 | macro pedphotcalc.C
|
---|
274 |
|
---|
275 | - added all class to perform the calibration, see macro calibration.C
|
---|
276 |
|
---|
277 | - added class MFFT to perform Fast Fourier Transforms
|
---|
278 |
|
---|
279 | - added class MSimulatedAnnealing to perform simulated annealing
|
---|
280 | minimizations
|
---|
281 |
|
---|
282 | - added new macro bootcampstandardanalysis.C which holds the skeleton
|
---|
283 | of the analysis chain discussed in the december bootcamp.
|
---|
284 |
|
---|
285 | - added support for DAQ raw data file format V2
|
---|
286 |
|
---|
287 | - implemented an arbitrary time stamp for the events from raw-data
|
---|
288 | files with file version<3. It is calculated from the run number,
|
---|
289 | the date of start and the FADC clock tick from the first module
|
---|
290 |
|
---|
291 | - implemented the correct decoding of the event time-stamp
|
---|
292 | coming from the DAQ for raw-data files with file-version>2
|
---|
293 |
|
---|
294 | - added a new classes storing the pedestals in units of photons:
|
---|
295 | MPedPhotPix, MPedPhotCam
|
---|
296 |
|
---|
297 | - added support for DC current files from the camera control
|
---|
298 |
|
---|
299 | - added support for start- and stop-time when merpping report files
|
---|
300 |
|
---|
301 | - added MReportCC storing the weather data from the CC-REPORT
|
---|
302 |
|
---|
303 | - added class to fill trainings and test matrices (MTFillMatrix)
|
---|
304 |
|
---|
305 | - added a filter performing a software trigger (MFSoftwareTrigger)
|
---|
306 |
|
---|
307 | - Added classes to perform parts of the standard analysis (Jobs):
|
---|
308 | + MJPedestals
|
---|
309 | + MJCalibration
|
---|
310 | + MJExtractSignal
|
---|
311 | Note: All of them are preliminary!
|
---|
312 |
|
---|
313 | - Added Iterator to iterate over files giving only the run-number
|
---|
314 |
|
---|
315 | - Added class (MHSectorVsTime) and example (sectorvstime.C) to plot
|
---|
316 | the evolution of a sector vs time
|
---|
317 |
|
---|
318 |
|
---|
319 |
|
---|
320 | *** Version 0.8.3 (2003/12/05)
|
---|
321 |
|
---|
322 | - adapted Random Forest classes to allow the use with MC
|
---|
323 | multi-telescope files which can be produced with the coming
|
---|
324 | camera version 0.7.
|
---|
325 |
|
---|
326 | - added classes to read and interprete central control report files
|
---|
327 | (Directory: mreport, Base-Class: MReport, Reader: MReportFileRead, ...)
|
---|
328 |
|
---|
329 | - enhanced merpp (the executable) to support .raw and .rep files.
|
---|
330 |
|
---|
331 | - added classes for light calibration (MCalibration* and
|
---|
332 | MHCalibration*) by Markus Gaug. Further work has to be and will
|
---|
333 | be done soon.
|
---|
334 |
|
---|
335 | - Added a preliminary 'synchronizer' (MReadReports) which will
|
---|
336 | replace MReadMarsFile as soon as it is finished.
|
---|
337 |
|
---|
338 | - Added a tutorial macro demonstrating how report files are merpped
|
---|
339 | and how they can be read from the root file in the correct order
|
---|
340 | of time (readrep.C)
|
---|
341 |
|
---|
342 | - Added a generalized histogram (similar to MH3) called MVsTime
|
---|
343 | which allows to plot variables (or rules - MDataChain - of
|
---|
344 | variables) vs time. For an example have a look at tempvstime.C.
|
---|
345 |
|
---|
346 | - Changed the name of the event trees:
|
---|
347 | + Events --> Events
|
---|
348 | + PedEvents --> Pedestals
|
---|
349 | + CalEvents --> Calibration
|
---|
350 |
|
---|
351 | - changed name of MTime in the event trees from MRawEvtTime to MTime
|
---|
352 |
|
---|
353 | - added displaying the sector indices to the mars event display
|
---|
354 |
|
---|
355 | - Magic Online Analysis (MOnA) implemented in a first version
|
---|
356 | (see mona.cc, MOnlineDump and MOnlineDisplay)
|
---|
357 |
|
---|
358 | - added classes to calculate event rate
|
---|
359 | (preliminary: MEventRateCalc, MEventRate)
|
---|
360 |
|
---|
361 | - added new executable 'readdaq' to read *.raw files from the DAQ directly
|
---|
362 |
|
---|
363 | - added classes dealing with the telescope pointing position (MPointing*)
|
---|
364 |
|
---|
365 | - implemented the 'final' Mars time stamp based on some experiences with
|
---|
366 | the new 'Synchonizer'
|
---|
367 |
|
---|
368 |
|
---|
369 |
|
---|
370 | *** Version 0.8.2 (2003/11/10)
|
---|
371 |
|
---|
372 | - accelerated standard analysis by a factor of 6-8 ...
|
---|
373 | + doing precalculations in MGeomCam for the pixel area ratio
|
---|
374 | + creating a look up table for the single pixels in MCerPhotEvt
|
---|
375 |
|
---|
376 | - added task to calculates weights in case you want to 'change'
|
---|
377 | the energy spectrum of a monte carlo file
|
---|
378 | (MMcWeightEnergySpecCalc - Great work from Marcos Lopez Moya)
|
---|
379 |
|
---|
380 | - added a new executable star which implements the
|
---|
381 | star.C macro as precompiled executable. Currently a flexible
|
---|
382 | setup is not possible, but a 'input card' setup will follow.
|
---|
383 |
|
---|
384 | - Starting to implement Multi-Telescope-Support based on the
|
---|
385 | upcomming camera version 0.7. The base for a general support
|
---|
386 | is implemented and the star-functionality is proven to work.
|
---|
387 |
|
---|
388 | - Replaced Event-Display in and Camera-Display in the Mars GUI
|
---|
389 | executable by a more convinient display base on MStatusDisplay.
|
---|
390 |
|
---|
391 | - fixed the algorithm for the blind pixel treatment (MBlindPixelCalc)
|
---|
392 |
|
---|
393 |
|
---|
394 |
|
---|
395 | *** Version 0.8.1 (2003/10/20)
|
---|
396 |
|
---|
397 | - added signal subtraction for pure on data by means of fitting
|
---|
398 | the background in the off region or by performing a combined
|
---|
399 | signal/background fit. Provides necessary histograms for
|
---|
400 | obtaining energy spectra and a light curve.
|
---|
401 |
|
---|
402 | - added classes to perform and study the selection of the
|
---|
403 | 2nd Level Trigger on MC data (example in triglvl2.C macro)
|
---|
404 |
|
---|
405 | - added pedestal calculation
|
---|
406 |
|
---|
407 | - implemented "democratic cleaning" (tail cut value proportional
|
---|
408 | to pixel area) according to Wolfgang's suggestion.
|
---|
409 |
|
---|
410 | - added Sigmabar treatment (calculation and basic histogramming)
|
---|
411 |
|
---|
412 | - added basic routines to apply padding
|
---|
413 |
|
---|
414 | - added first implementation of MARS-based source visibility plotter
|
---|
415 | (needs to be linked against slalib, preliminary version)
|
---|
416 |
|
---|
417 | - enhanced functionality of data chains: random numbers, conversion
|
---|
418 | functions and access to MHMatrix objects
|
---|
419 |
|
---|
420 | - fixed some bugs in the CT1 Preproc file reader, which gave wrong
|
---|
421 | numbers under certain circumstances (runs with 0 events included)
|
---|
422 |
|
---|
423 | - fixed a bug in the general filter MF (didn't work on some systems
|
---|
424 | at all)
|
---|
425 |
|
---|
426 | - fixed a bug in chaining files, which caused the analysis to crash or
|
---|
427 | ignore files
|
---|
428 |
|
---|
429 | - implemented more geometry classes describing the parameters used
|
---|
430 | to simulate the PMT camera
|
---|
431 |
|
---|
432 | - added new Monte Carlo classes containing the setup of the different
|
---|
433 | programs in the MC chain.
|
---|
434 |
|
---|
435 | - added a (preliminary) general task to evaluate chi-square of a given
|
---|
436 | parameter in an eventloop.
|
---|
437 |
|
---|
438 | - first implementation of a container describing the observatory
|
---|
439 | location (Long, Lat, etc)
|
---|
440 |
|
---|
441 | - added Random Forest - method for g/h-separation
|
---|
442 |
|
---|
443 | - made compatible with the latest PRO version of root (3.04/02 and 3.05/07)
|
---|
444 | (this means, that it is compiling, but not yet fully tested)
|
---|
445 |
|
---|
446 | - added a new status display which can show the present status
|
---|
447 | of histograms while an eventloop is running (MStatusDisplay,
|
---|
448 | an example can be found at status.C)
|
---|
449 |
|
---|
450 | - reorganized directories:
|
---|
451 | classes describing the image --> mimage
|
---|
452 | classes containing Monte Carlo Histograms --> mhistmc
|
---|
453 | classes for Random Forest method --> mranforest
|
---|
454 |
|
---|
455 | - added (event-)weights to fill histograms
|
---|
456 |
|
---|
457 | - colors in logging output to screen
|
---|
458 |
|
---|
459 | - changes to the Image Parameter declaration:
|
---|
460 | + moved fConc, fConc1 from MHillasSrc to MNewImagePar
|
---|
461 | + moved fNumUsedPix, fNumCorePix from MHillas to MNewImagePar
|
---|
462 | + MHillasExt now derives from MParContainer instead of MHillas
|
---|
463 | --> Files written with the old definition are more or less unreadable
|
---|
464 |
|
---|
465 | - reading of reflector files
|
---|
466 |
|
---|
467 | - display data from reflector files in the camera
|
---|
468 |
|
---|
469 | - implemented currents (and display them in the camera)
|
---|
470 |
|
---|
471 | - logarithmic scale in camera
|
---|
472 |
|
---|
473 | - added class to iterate through directory contents (MDirIter)
|
---|
474 |
|
---|
475 |
|
---|
476 |
|
---|
477 | *** Version 0.8 (2002/11/18)
|
---|
478 |
|
---|
479 | - added all subdirectories as Include-Paths for ACLIC (s. rootlogon.C)
|
---|
480 |
|
---|
481 | - corrected 48(!) wrong entries in the Next Neighbor table of the
|
---|
482 | Magic Camera (all in the inner part of the outer ring, mostly
|
---|
483 | missing a single NN)
|
---|
484 |
|
---|
485 | - Fixed a bug in the table describing the Next Neighbours of the
|
---|
486 | CT1 camera (a pixel 127 doesn't exist and the pixel 126 didn't
|
---|
487 | have any neighbour)
|
---|
488 |
|
---|
489 | - changed trigrate.C: now it calculates the pure NSB triggers from
|
---|
490 | a camera file (generated with no showers), so there is no need
|
---|
491 | to introduce them by hand in the BgR array (for more details
|
---|
492 | please ask Abelardo)
|
---|
493 |
|
---|
494 | - added MHHadronness (and MHadronness) as a general facility to evaluate
|
---|
495 | the quality of a gamma-hadron seperation method
|
---|
496 |
|
---|
497 | - changed MWriteAsciiFile to accept rules (MDataChain)
|
---|
498 |
|
---|
499 | - Calls to MWriteAsciiFile::AddContainer and MWriteAsciiFile::AddRule
|
---|
500 | must be replaced by calles to MWriteAsciiFile::AddColumn and
|
---|
501 | MWriteAsciiFile::AddColumns. Be carefull, the arguments have slightly
|
---|
502 | changed.
|
---|
503 |
|
---|
504 | - Implemented generalized event-matrices (one row per event)
|
---|
505 | (MHMatrix)
|
---|
506 |
|
---|
507 | - implemented the one dimensional composite probabilities
|
---|
508 | (MHCompProb, MCompProbCalc, comprob.C)
|
---|
509 |
|
---|
510 | - implemented the Multidimensional Distances (Next Neighbours, Kernel)
|
---|
511 | (MMultiDimDistCalc, multidimdist.C, multidimdist2.C, MHMatrix)
|
---|
512 |
|
---|
513 | - Added a camera display displaying the pixel numbers to the
|
---|
514 | event display gui.
|
---|
515 |
|
---|
516 | - Added Monte Carlo Informations to event display gui
|
---|
517 |
|
---|
518 | - Changed the camera display to display the pixel numbering
|
---|
519 |
|
---|
520 | - Added three buttons to the camera display to change the palette
|
---|
521 |
|
---|
522 | - Added the number of used and core pixels after image cleaning
|
---|
523 | to MHillas
|
---|
524 |
|
---|
525 | - Changed the algorithm used in MHillas according to TDAS 02-03
|
---|
526 |
|
---|
527 | - Changed the Alpha range according to TDAS 02-03 to [-90°,90°]
|
---|
528 |
|
---|
529 | - Changed the algorithm used in MHillasSrc according to TDAS 02-03
|
---|
530 |
|
---|
531 | - Added fCosDeltaAlpha to MHillasSrc
|
---|
532 |
|
---|
533 | - The numbers of photons used to calculate fConc and fConc1 in
|
---|
534 | MHillasExt are now scaled with the pixel size, so that one get
|
---|
535 | a four times smaller value for the bigger pixels in the outer ring.
|
---|
536 |
|
---|
537 | - added new task to smooth the camera contents (MCameraSmooth)
|
---|
538 |
|
---|
539 | - added possibility to use interpolated pixel values for blind pixels
|
---|
540 | instead of removing it completely from the analysis
|
---|
541 |
|
---|
542 | - Implemented the possibility to save the whole eventloop with
|
---|
543 | its setup to a file. This information can be read and from
|
---|
544 | it you can (re)create a Macro. See MEvtLoop::Read, MEvtLoop::Write
|
---|
545 | and MEvtLoop::MakeMacro. If you find something not working, please
|
---|
546 | report - this stuff is still in a beta phase.
|
---|
547 |
|
---|
548 | - MBlindPixelCalc set all Ceta-Tauri pixels to unused not only for the
|
---|
549 | file having crab starfield, but also for all following files - fixed
|
---|
550 |
|
---|
551 | - MTaskList::PrintStatistics can now be instructud to print also the
|
---|
552 | title, too: use PrintStatistics(0, kTRUE)
|
---|
553 |
|
---|
554 | - Changed the image cleaning so that pixels with to many 'used'
|
---|
555 | neighbors are left used (to get rid of 'holes' in events)
|
---|
556 |
|
---|
557 | - Introduced more output to the camera displays
|
---|
558 |
|
---|
559 | - Added an array of histograms (eg one hist per run), MHArray
|
---|
560 |
|
---|
561 | - Added a _preliminary_ version of the reader for CT1 PreProc files
|
---|
562 | (MCT1ReadPreProc)
|
---|
563 |
|
---|
564 | - Fixed the error calculation of MHMCollectionArea and MHMcIntRate
|
---|
565 | (thanks to Raquel)
|
---|
566 |
|
---|
567 | - added the first energy estimator (MEnergyEstParam, estimate.C,
|
---|
568 | estfit.C) using a parametrization
|
---|
569 |
|
---|
570 | - Added some new Monte Carlo paremeter containers used to store
|
---|
571 | setup information from the MC chain (MMcConfigRunHeader,
|
---|
572 | MMcCorsikaRunHeader, MGeomPMT, MGeomMirror)
|
---|
573 |
|
---|
574 |
|
---|
575 |
|
---|
576 | *** Version 0.7 (2002/04/30)
|
---|
577 |
|
---|
578 | - added a bugfix to MCerPhotCalc. In older camera versions (<=40)
|
---|
579 | the pedestal mean value was saved incorrectly. For files from
|
---|
580 | this versions we substract 0.5 from the pedestal mean.
|
---|
581 | WARNING: This may effect your results, so don't wonder...
|
---|
582 |
|
---|
583 | - First implementation of an algorithm using only triggered events
|
---|
584 | for the collection area calculation
|
---|
585 |
|
---|
586 | - Ascii Output can now also be used for parameter containers which
|
---|
587 | doesn't overload MParCointainer::AsciiWrite
|
---|
588 |
|
---|
589 | - The Ascii Output is now also capable of writing single data members
|
---|
590 | of one container
|
---|
591 |
|
---|
592 | - You are now able to change the order of the values written to the
|
---|
593 | ascii file
|
---|
594 |
|
---|
595 | - You can now specify a conversion factor for each data member written
|
---|
596 | to an ascii file. This may be usefull to change the units of the
|
---|
597 | data member (eg. degrees instead of millimeters in case of the
|
---|
598 | hillas parameters)
|
---|
599 |
|
---|
600 | - Replaced old MHillas by a new structure which allows you to extend
|
---|
601 | the parameters stored in MHillas very easily:
|
---|
602 | see MHillas and MHillasExt
|
---|
603 |
|
---|
604 | - Added classes to handle source dependancy of image parameters:
|
---|
605 | see MHillasSrc
|
---|
606 |
|
---|
607 | - Added container (MBinning) to have a standard input for the binning
|
---|
608 | in different histograms (eg. the Energy bins should be the same in
|
---|
609 | all histograms)
|
---|
610 |
|
---|
611 | - Changed Hillas histograms from mm to deg
|
---|
612 |
|
---|
613 | - Added the flexible binning to the hillas histograms
|
---|
614 |
|
---|
615 | - Added a filter for the alpha parameter (MFAlpha)
|
---|
616 |
|
---|
617 | - It is now possible to write single data members of a class object to
|
---|
618 | an output stream instead of the whole container only
|
---|
619 |
|
---|
620 | - Added a generalized filter for a data member:
|
---|
621 | MFDataMember filter("MHillas.fWidth", '<', 0.5);
|
---|
622 |
|
---|
623 | - Added a generalized Filter parser for more difficult filter rules
|
---|
624 | MF filter("MHillas.fWidth<0.5 && MHillas.fLength>0.5");
|
---|
625 |
|
---|
626 | - Added new Monte Carlo histograms:
|
---|
627 | MHMcEnergyImpact and MHMcEfficiency
|
---|
628 |
|
---|
629 | - Added many new histograms needed for the flux calculation.
|
---|
630 |
|
---|
631 | - Added a generalized histograms which can fill and show up to three
|
---|
632 | data members in either a one-, two- or three-dimensional histogram, eg:
|
---|
633 | MH3 mh3("MHillas.fWidth", "MHillas.fLength");
|
---|
634 |
|
---|
635 | - Added:
|
---|
636 | * calculation of <Theta> as a function of Theta (MHThetabarTheta)
|
---|
637 | * calculation of <Theta> as a function of time (MHThetabarTime)
|
---|
638 | they are needed in the flux calculation in
|
---|
639 | order to select for a given bin in Theta (or time) the appropriate
|
---|
640 | effective collection area, which is assumed to be given as a function
|
---|
641 | of Theta and the true energy
|
---|
642 |
|
---|
643 | - Added calculation of the migration matrix in the energy
|
---|
644 | (MHMcEnergyMigration):
|
---|
645 | the migration matrix describes the migration from the true (E_true)
|
---|
646 | to the estimated energy (E_est); it is needed to determine the
|
---|
647 | distribution of E_true from the measured distribution of E_est
|
---|
648 | by unfolding
|
---|
649 |
|
---|
650 | - changed the color palette in the camera display to DeapSea.
|
---|
651 |
|
---|
652 |
|
---|
653 |
|
---|
654 | *** Version 0.6 (2002/01/15)
|
---|
655 |
|
---|
656 | - Introduce the option of disable pixels (MBlindPixels and
|
---|
657 | MBlindPixelCalc) for the analysis (eg MHillasCalc) to be
|
---|
658 | able to deal with Star Field NSB.
|
---|
659 |
|
---|
660 | - Fixed a bug in the pedestals substraction
|
---|
661 |
|
---|
662 | - Introduced verbosity levels
|
---|
663 |
|
---|
664 | - Introduced a task (MReadMarsFile) which reads the RunHeader tree, too.
|
---|
665 |
|
---|
666 | - Fixed several bugs in MFTriggerLvl1 which caused to filter not to
|
---|
667 | work correctly (thanks to Abelardo)
|
---|
668 |
|
---|
669 | - Introduced correct treatment of the diffuse Night Sky Background
|
---|
670 | and NSB (MMcPedestalNSB)
|
---|
671 |
|
---|
672 | - Corrected treatment of the electronic noise (MMcPedestalCopy)
|
---|
673 |
|
---|
674 | - Introduced MMcRunHeaders which contains monte carlo run informations
|
---|
675 |
|
---|
676 | - Added a 'Print'-Task (MPrint) which calls the Print function
|
---|
677 | of a parameter container for each event
|
---|
678 |
|
---|
679 | - Removed MHtml (was replaced by THtml of root 3.02) in dohtml.C
|
---|
680 |
|
---|
681 | - changes to be more efficient with root 3.02/06
|
---|
682 |
|
---|
683 | - root 3.02/06 fixes:
|
---|
684 | + the memory leak when reading MRawEvtData
|
---|
685 | + loosing more time than necessary to update the progress bar
|
---|
686 |
|
---|
687 | - MWriteAsciiFile is now capable of writing more than one container
|
---|
688 | in a line. For example: To be able to write Monte Carlo and
|
---|
689 | Hillas values (energy and alpha) in one line.
|
---|
690 |
|
---|
691 |
|
---|
692 |
|
---|
693 | *** Version 0.5 (2001/11/06)
|
---|
694 |
|
---|
695 | - Added new GUI functionality (Analysis)
|
---|
696 |
|
---|
697 | - Added a camera display to be able to display events in the camera
|
---|
698 | together with the calculated hillas ellipse
|
---|
699 |
|
---|
700 | - Added a 'Clone'-Task (MClone) which can clone a parameter container
|
---|
701 | object at any state of the analysis, so that the output are several
|
---|
702 | states
|
---|
703 |
|
---|
704 | - Fixed a bug in the collection area error calculation
|
---|
705 | (Thanks to Ciro and Abelardo)
|
---|
706 |
|
---|
707 | - Fixed a bug which causes merpp to crash in some environments
|
---|
708 |
|
---|
709 | - Implemented auto enabling scheme for Branches to speed up reading
|
---|
710 | a lot (see MReadTree and MTask)
|
---|
711 |
|
---|
712 | - Fixed a bug in the Histogram classes which caused histograms to
|
---|
713 | be written to a file by MWriteRootFile without request
|
---|
714 |
|
---|
715 | - changed the object I/O from the old stylish root I/O to the new
|
---|
716 | 'auto evolution scheme' This was done only for classes which are not
|
---|
717 | yet used in Monte Carlo files, so that these files are still readable.
|
---|
718 |
|
---|
719 | - Added support for a progress bar in MEvtLoop and MReadTree
|
---|
720 | (see the Analysis Window in Mars for an example)
|
---|
721 |
|
---|
722 | - Fixed a bug in the package creation which disturbed the conversion
|
---|
723 | between a mars version unpacked from a tar file and the repository.
|
---|
724 |
|
---|
725 | - Changed the code to writer merpped (converted into root format)
|
---|
726 | raw files, to get faster (around 10%)
|
---|
727 |
|
---|
728 |
|
---|
729 |
|
---|
730 | *** Version 0.4 (2001/09/20)
|
---|
731 |
|
---|
732 | - This release is made to compile on a root version >= 3.00
|
---|
733 |
|
---|
734 | - Fixed a bug which causes MReadTree to read the first file only
|
---|
735 |
|
---|
736 | - Added a task to compute the trigger rate (MMcTriggerRateCalc)
|
---|
737 |
|
---|
738 | - Added a task to write a container to an Ascii file (MWriteAsciiFile)
|
---|
739 |
|
---|
740 | - Added a task to write several container to a root file (MWriteRootFile)
|
---|
741 |
|
---|
742 | - Added calculation of the Enegry Threshold (MMcThresholdCalc)
|
---|
743 |
|
---|
744 | - Added calculation of the collection area (MMcCollectionAreaCalc)
|
---|
745 |
|
---|
746 | - fixed some bugs in the Hillas calculation
|
---|
747 |
|
---|
748 | - added filters to be able to control the task execution dependent on
|
---|
749 | a parameter (for example: the number of level 1 triggers in a MC-file)
|
---|
750 |
|
---|
751 |
|
---|
752 |
|
---|
753 | *** Version 0.3 (2001/04/23)
|
---|
754 |
|
---|
755 | - Many demo macros added
|
---|
756 |
|
---|
757 | - MCT1ReadAscii is now able to handle more than one file (s. ::AddFile)
|
---|
758 |
|
---|
759 | - Hillas Calculation added
|
---|
760 |
|
---|
761 | - Standard image cleaning available
|
---|
762 |
|
---|
763 | - MReadTree is now able to handle more than one file
|
---|
764 | (Remark: of the same structure)
|
---|
765 |
|
---|
766 | - Now we are able to display events in a first version of the
|
---|
767 | Camera event display. To do this we must run the macro
|
---|
768 | "macros/readCT1.C" to read data from CT1.
|
---|
769 |
|
---|
770 |
|
---|
771 |
|
---|
772 | *** Version 0.2 (2001/01/24)
|
---|
773 |
|
---|
774 | - First Implementation of a Gui to read the raw data. Start the
|
---|
775 | gui with the command mars.
|
---|
776 |
|
---|
777 |
|
---|
778 |
|
---|
779 | *** Version 0.1 (2000/12/20)
|
---|
780 |
|
---|
781 | - First official release 0.1
|
---|
782 |
|
---|
783 | - Changes:
|
---|
784 |
|
---|
785 | + changed calling style of MRawPixelIterator from do...while to
|
---|
786 | while-loop
|
---|
787 |
|
---|