source: trunk/MagicSoft/Mars/NEWS@ 6869

Last change on this file since 6869 was 6869, checked in by tbretz, 20 years ago
*** empty log message ***
File size: 28.5 KB
Line 
1 -*-*- END -*-*-
2 *** Version <cvs>
3
4 - Calibration is now done autmatically into equiv. photo-electrons like
5 decided by the Collaboration Board
6
7 - Reference lines in the display can be read from resource file
8
9 - Interlaced calibration events can be handled by callisto
10
11 - High-Gain vs. Low-Gain calibration constants can be calculated
12 (but not yet applied) in callisto.
13
14 - class MJCalibTest can be called by callisto
15
16 - interpolated pointing positions are now in Tree "Events" after
17 calibration
18
19 - callisto can now run with three data types: rawdata, rootdata, MC
20
21 - added two classes mreport/MReportStarguider.cc and
22 mreport/MReportStarguider.h for implementing starguider-data
23
24 - the output of merpp-update now contains starguider information:
25 MReportStarguider and MTimeStarguider
26
27 - Fixed bug in MHHadronness.cc which made that the displayed Q-factor
28 values were lower than they should. This was more visible for high
29 energy (Size) events.
30
31 - Made MExtractTimeAndChargeDigitalFilter the default for callisto
32
33 - added a new loop to callisto to support the correct extraction of
34 the pedestal and pedestal rms through the signal extractor
35
36 - added class to perform fourier tranformation of a hexagonal structure
37 (MHexagonalFT)
38
39 - added class to perform fourier tranformation of a hexagonal structure
40 in a tasklist (MHexagonalFTCalc) example: hft.C
41
42 - added class to enhance the MCerPhotEvt from the Magic camera geometry
43 MGeomCamMagic to a enhanced geometry MGeomCamMagicXT having only
44 small pixels, example: extendcam.C
45
46 - added possibility to write data to memory (TTree) using MWriteRootFile
47
48 - added possibility to read a TTree stored only in memory by MReadTree
49
50 - new classes to deal with the interleaved calibration events:
51 MTriggerPattern, MTriggerPatternDecode and MFTriggerPattern
52
53 - implemented filters to callisto to skip calibration events
54
55 - changed callisto to calculate three kinds of pedestals and pedestal rms:
56 + fundamental pedestal (MPedPhotFundamental): extracted directly from
57 the slices by statistics
58 + pedestal from extractor (MPedPhotFromExtractor): extracted with the
59 signal extractor without randomization
60 + random pedestal from extractor (MPedPhotFromExtractorRndm): extracted
61 with the signal extractor with randomization (extraction window is
62 randomly fixed)
63 The three kind of pedestal is not yet implemented (for speed reasons) as
64 long as nobody really needs it:
65 + pedestal from extractor with randomizatiuon (MPedPhotFromExtractorRndm):
66 extracted with the signal extractor with randomization
67
68 - implemented data reduction in calibrated data by reducing the precision
69 of the stored floating point values (pedestal, rms and signal) to
70 roughly 0.5%
71
72 - fixed showplot to make file format conversion (eg. converting a
73 status display stored in a root file into a postscript file) in
74 batch mode possible:
75 showplot -b --save-as-ps[=outfile.ps] infile.root
76
77 - Allow class names as part of filter rules, eg
78 (MFSupercuts) && (MHillas.fSize>100)
79
80 - fixed a lot of stuff to allow all programs to process MonteCarlo
81 camera files.
82
83 - enhanced possibility to debug reading of resource file
84
85 - MDataChain should handle priorities of operator more
86 accurate now
87
88 - completely revised the container in which the signal is stored
89 MCerPhotEvt/Pix, MArrivalTime --> MSignalCam/Pix
90 * the new implementation is faster and
91 * needs less storage space
92
93 - FIRST version which can process Monte Carlos through the
94 whole chain of programs (callisto, star, etc)
95
96 - implemented new image parameters for the border length of
97 the shower image (MNewImagePar2)
98
99
100
101 *** Version 0.8.6 (2004/10/05)
102
103 - New combined signal and time extractor
104 MExtractTimeAndChargeDigitalFilter
105
106 - The Report for the trigger section in the CC run summary has been
107 updated, and now the IPRs (Individual Pixel Rates) are available.
108
109 - new macros for database interaction: filldotrun.C, filldotrbk.C
110
111 - added new program which can convert colored output which was redirected
112 into a file back into colored text (for example to display it with
113 more): showlog
114
115 - added new program to display an MStatusArray of plots (stored with
116 MStatusDisplay) from a file: showplot
117
118 - Added support for Sequences (MSequence). Sequences are blocks of run
119 files containing the same calibration and belonging to the same
120 source
121
122 - Added a new task (MTaskEnv) which can be used in setup files to switch
123 between different tasks (for example to choose a signal extractor)
124
125 - Implemented automatic file splitting in MWriteRootFile
126
127 - After image cleaning an island index is assigned to all used pixels.
128 The index corresponds to the order of the islands in size.
129
130 - added a cleaning which takes signal height _and_ arrival time into
131 account: probability cleaning (for more details see MImgCleanStd)
132
133 - added a cleaning which takes takes the absolute number of photons
134 times the area ratio as cleaning level
135 (for more details see MImgCleanStd)
136
137 - Changed calculation of image parameters such, that it can be done
138 for all used pixels or the pixels with a defined island index only
139
140 - implemented new image parameters displaying the number of islands,
141 saturated hi-gain and lo-gain pixels (MImagePar, MHImagePar)
142
143 - event display in executable changed to support also calibrated files
144 (done with MJCalibrateSignal)
145
146 - added program doing the calibration and the signal extraction
147 and signal calibration: callisto Most part of the setup is done
148 by a resource file: callisto.rc
149
150 - implemented support for pixels with negative IDs (Raw file format
151 version 4)
152
153 - implemented an new option in merpp (--auto-time) to get the time
154 range for cc and/or caco data from the run header of the raw data
155
156 - New star-program (star and MJStar). Taking calibrated data from
157 callisto/MJCalibrateSignal as input. The setup is done through
158 a resource file: star.rc
159
160 - Added possibility to setup the eventloop in the mars-executable
161 Camera Display by a resource file: mars.rc
162
163 - The the mars-executable Camera Display can now also read
164 calibrated data files written by callisto/MJCalibrateSignal
165
166 - Added a new class which can calculate the source position in
167 the camera from a pointing model known to be correct and
168 the pointing model used for observations (MSrcPosFromModel)
169
170 - added a new version of the class calculating the effective on-time
171 MHEffectiveOnTime. It unifies the old classes MHEffOnTime,
172 MHEffOnTimeTime, MHEffOnTimeTheta, MHTimeDiff, MHTimeDiffTime and
173 MHTimeDiffTheta.
174
175 - added the possibility to count how often a signal is above (or
176 below) a certain threshold in MHCamEvent and MHCamEventRot (this
177 can replace MHTriggerLvl0)
178
179 - added ore convinient ways to set the axis-titles of your histograms
180 in your macro to some MH-classes like: MH3, MHVsTime, MHSectorVsTime,
181 MHPixVsTime, MHVsTime, MHCamEvent and MHCamEventRot
182
183
184
185 *** Version 0.8.5 (2004/08/06)
186
187 - new Signal Extractors: MExtractFixedWindowSpline
188 and MExtractAmplitudeSpline
189
190 - implementes interleave in merpp to be able to merpp parts of a file
191
192 - implemented force-functionality to merpp
193
194 - star display to display star catalogs (MAstroCatalog)
195
196 - star display to 'mirror' stars to the camera (MAstroCamera)
197
198 - implemented a new cleaning option which allows cleaning scaled with
199 the real ratio of the rms depending on the pixel size, not only the
200 square root of the pixelsize (MImgCleanStd, MCameraData)
201
202 - removed obsolete MBlind* classes
203
204 - Signal extractor taking the AB flag into account implemented (this makes
205 an odd number of slices for signal extraction possible
206 (MExtractSignalABcorr)
207
208 - implemented a class extracting the pedestal from the raw-data (events)
209 itself using empty lo-gain (MpedCalcFromLoGain)
210
211 - Added mean values to MPedPhotCam
212
213 - Added Makefile for Darwin (this OS is NOT officially supported!)
214
215
216
217 *** Version 0.8.4 (2004/04/19)
218
219 - new fast arrival time extractor using cubic splines:
220 MExtractTimeFastSpline
221
222 - implementes multi-argument support in MDataChain
223 ("pow(a, b)")
224
225 - implemented double reference support in MDataChain
226 ("MCameraLV.fPowerSupplyA.fVoltagePos5V")
227
228 - added support in MF for expressiond like
229 "MHillas.fWidth<2*<MHillas.fLength"
230
231 - MDataChain is now able to support variables like [0], [1], ...
232 which can be used in fit functions as parameters. The interface
233 is implemented through the new virtual function
234 MParContainer::SetVariables
235
236 - added new class MArrivalTimeCam/MArrivalTimePix:
237 Storage containers to hold the ArrivalTime of the camera/pixel
238
239 - added new classes for the calibration of relative arrival times:
240 MCalibrationRelTimePix and MCalibrationRelTimeCam
241
242 - added new classes to extract the signal of the blind pixel and the
243 PIN Diode separately: MExtractBlindPixel and MExtractPINDiode
244
245 - added new classes for the bad-pixels treatment (MBadPixels*)
246 which are more powerfull than the old ones (MBlindPixel*)
247 and will replace them.
248
249 - added filter against cosmics: MFCosmics
250
251 - added new class MArrivalTimeCalc2:
252 Calculates the arrival time as the signal weighted mean of the time
253 slices in the maximum window
254
255 - added a new macro call pointspreadfucntion.C that fits with a 2D
256 gaussian the DC spot for an star. It gives you the RMS of
257 the PSF and the center of the star, very useful for misspointing
258 studies.
259
260 - added support for multi-telescope camera files. Added classes
261 MStereoCalc and MStereoPar, classes to calculate and store shower
262 parameters calculated from the data of two telescopes, for the MC
263 studies regarding the MAGIC clone.
264
265 - added MMcCalibrationCalc, MMcCalibrationUpdate, classes to obtain
266 MC data calibrated in photons instead of ADC counts.
267
268 - added three macros to show the calibration and analysis chain of
269 MC data. The macro starmc.C does both calibration and analysis, producing
270 an output containing Hillas parameters for each event. The macro
271 mccalibrate.C does just the calibration and writes out a file containing
272 pixel information in photons instead of FADC data. The macro starmc2.C
273 reads in such a file and produces an output with Hillas parameters.
274
275 - added MPedPhotCalc to compute pedestals in units of photons, see
276 macro pedphotcalc.C
277
278 - added all class to perform the calibration, see macro calibration.C
279
280 - added class MFFT to perform Fast Fourier Transforms
281
282 - added class MSimulatedAnnealing to perform simulated annealing
283 minimizations
284
285 - added new macro bootcampstandardanalysis.C which holds the skeleton
286 of the analysis chain discussed in the december bootcamp.
287
288 - added support for DAQ raw data file format V2
289
290 - implemented an arbitrary time stamp for the events from raw-data
291 files with file version<3. It is calculated from the run number,
292 the date of start and the FADC clock tick from the first module
293
294 - implemented the correct decoding of the event time-stamp
295 coming from the DAQ for raw-data files with file-version>2
296
297 - added a new classes storing the pedestals in units of photons:
298 MPedPhotPix, MPedPhotCam
299
300 - added support for DC current files from the camera control
301
302 - added support for start- and stop-time when merpping report files
303
304 - added MReportCC storing the weather data from the CC-REPORT
305
306 - added class to fill trainings and test matrices (MTFillMatrix)
307
308 - added a filter performing a software trigger (MFSoftwareTrigger)
309
310 - Added classes to perform parts of the standard analysis (Jobs):
311 + MJPedestals
312 + MJCalibration
313 + MJExtractSignal
314 Note: All of them are preliminary!
315
316 - Added Iterator to iterate over files giving only the run-number
317
318 - Added class (MHSectorVsTime) and example (sectorvstime.C) to plot
319 the evolution of a sector vs time
320
321
322
323 *** Version 0.8.3 (2003/12/05)
324
325 - adapted Random Forest classes to allow the use with MC
326 multi-telescope files which can be produced with the coming
327 camera version 0.7.
328
329 - added classes to read and interprete central control report files
330 (Directory: mreport, Base-Class: MReport, Reader: MReportFileRead, ...)
331
332 - enhanced merpp (the executable) to support .raw and .rep files.
333
334 - added classes for light calibration (MCalibration* and
335 MHCalibration*) by Markus Gaug. Further work has to be and will
336 be done soon.
337
338 - Added a preliminary 'synchronizer' (MReadReports) which will
339 replace MReadMarsFile as soon as it is finished.
340
341 - Added a tutorial macro demonstrating how report files are merpped
342 and how they can be read from the root file in the correct order
343 of time (readrep.C)
344
345 - Added a generalized histogram (similar to MH3) called MVsTime
346 which allows to plot variables (or rules - MDataChain - of
347 variables) vs time. For an example have a look at tempvstime.C.
348
349 - Changed the name of the event trees:
350 + Events --> Events
351 + PedEvents --> Pedestals
352 + CalEvents --> Calibration
353
354 - changed name of MTime in the event trees from MRawEvtTime to MTime
355
356 - added displaying the sector indices to the mars event display
357
358 - Magic Online Analysis (MOnA) implemented in a first version
359 (see mona.cc, MOnlineDump and MOnlineDisplay)
360
361 - added classes to calculate event rate
362 (preliminary: MEventRateCalc, MEventRate)
363
364 - added new executable 'readdaq' to read *.raw files from the DAQ directly
365
366 - added classes dealing with the telescope pointing position (MPointing*)
367
368 - implemented the 'final' Mars time stamp based on some experiences with
369 the new 'Synchonizer'
370
371
372
373 *** Version 0.8.2 (2003/11/10)
374
375 - accelerated standard analysis by a factor of 6-8 ...
376 + doing precalculations in MGeomCam for the pixel area ratio
377 + creating a look up table for the single pixels in MCerPhotEvt
378
379 - added task to calculates weights in case you want to 'change'
380 the energy spectrum of a monte carlo file
381 (MMcWeightEnergySpecCalc - Great work from Marcos Lopez Moya)
382
383 - added a new executable star which implements the
384 star.C macro as precompiled executable. Currently a flexible
385 setup is not possible, but a 'input card' setup will follow.
386
387 - Starting to implement Multi-Telescope-Support based on the
388 upcomming camera version 0.7. The base for a general support
389 is implemented and the star-functionality is proven to work.
390
391 - Replaced Event-Display in and Camera-Display in the Mars GUI
392 executable by a more convinient display base on MStatusDisplay.
393
394 - fixed the algorithm for the blind pixel treatment (MBlindPixelCalc)
395
396
397
398 *** Version 0.8.1 (2003/10/20)
399
400 - added signal subtraction for pure on data by means of fitting
401 the background in the off region or by performing a combined
402 signal/background fit. Provides necessary histograms for
403 obtaining energy spectra and a light curve.
404
405 - added classes to perform and study the selection of the
406 2nd Level Trigger on MC data (example in triglvl2.C macro)
407
408 - added pedestal calculation
409
410 - implemented "democratic cleaning" (tail cut value proportional
411 to pixel area) according to Wolfgang's suggestion.
412
413 - added Sigmabar treatment (calculation and basic histogramming)
414
415 - added basic routines to apply padding
416
417 - added first implementation of MARS-based source visibility plotter
418 (needs to be linked against slalib, preliminary version)
419
420 - enhanced functionality of data chains: random numbers, conversion
421 functions and access to MHMatrix objects
422
423 - fixed some bugs in the CT1 Preproc file reader, which gave wrong
424 numbers under certain circumstances (runs with 0 events included)
425
426 - fixed a bug in the general filter MF (didn't work on some systems
427 at all)
428
429 - fixed a bug in chaining files, which caused the analysis to crash or
430 ignore files
431
432 - implemented more geometry classes describing the parameters used
433 to simulate the PMT camera
434
435 - added new Monte Carlo classes containing the setup of the different
436 programs in the MC chain.
437
438 - added a (preliminary) general task to evaluate chi-square of a given
439 parameter in an eventloop.
440
441 - first implementation of a container describing the observatory
442 location (Long, Lat, etc)
443
444 - added Random Forest - method for g/h-separation
445
446 - made compatible with the latest PRO version of root (3.04/02 and 3.05/07)
447 (this means, that it is compiling, but not yet fully tested)
448
449 - added a new status display which can show the present status
450 of histograms while an eventloop is running (MStatusDisplay,
451 an example can be found at status.C)
452
453 - reorganized directories:
454 classes describing the image --> mimage
455 classes containing Monte Carlo Histograms --> mhistmc
456 classes for Random Forest method --> mranforest
457
458 - added (event-)weights to fill histograms
459
460 - colors in logging output to screen
461
462 - changes to the Image Parameter declaration:
463 + moved fConc, fConc1 from MHillasSrc to MNewImagePar
464 + moved fNumUsedPix, fNumCorePix from MHillas to MNewImagePar
465 + MHillasExt now derives from MParContainer instead of MHillas
466 --> Files written with the old definition are more or less unreadable
467
468 - reading of reflector files
469
470 - display data from reflector files in the camera
471
472 - implemented currents (and display them in the camera)
473
474 - logarithmic scale in camera
475
476 - added class to iterate through directory contents (MDirIter)
477
478
479
480 *** Version 0.8 (2002/11/18)
481
482 - added all subdirectories as Include-Paths for ACLIC (s. rootlogon.C)
483
484 - corrected 48(!) wrong entries in the Next Neighbor table of the
485 Magic Camera (all in the inner part of the outer ring, mostly
486 missing a single NN)
487
488 - Fixed a bug in the table describing the Next Neighbours of the
489 CT1 camera (a pixel 127 doesn't exist and the pixel 126 didn't
490 have any neighbour)
491
492 - changed trigrate.C: now it calculates the pure NSB triggers from
493 a camera file (generated with no showers), so there is no need
494 to introduce them by hand in the BgR array (for more details
495 please ask Abelardo)
496
497 - added MHHadronness (and MHadronness) as a general facility to evaluate
498 the quality of a gamma-hadron seperation method
499
500 - changed MWriteAsciiFile to accept rules (MDataChain)
501
502 - Calls to MWriteAsciiFile::AddContainer and MWriteAsciiFile::AddRule
503 must be replaced by calles to MWriteAsciiFile::AddColumn and
504 MWriteAsciiFile::AddColumns. Be carefull, the arguments have slightly
505 changed.
506
507 - Implemented generalized event-matrices (one row per event)
508 (MHMatrix)
509
510 - implemented the one dimensional composite probabilities
511 (MHCompProb, MCompProbCalc, comprob.C)
512
513 - implemented the Multidimensional Distances (Next Neighbours, Kernel)
514 (MMultiDimDistCalc, multidimdist.C, multidimdist2.C, MHMatrix)
515
516 - Added a camera display displaying the pixel numbers to the
517 event display gui.
518
519 - Added Monte Carlo Informations to event display gui
520
521 - Changed the camera display to display the pixel numbering
522
523 - Added three buttons to the camera display to change the palette
524
525 - Added the number of used and core pixels after image cleaning
526 to MHillas
527
528 - Changed the algorithm used in MHillas according to TDAS 02-03
529
530 - Changed the Alpha range according to TDAS 02-03 to [-90°,90°]
531
532 - Changed the algorithm used in MHillasSrc according to TDAS 02-03
533
534 - Added fCosDeltaAlpha to MHillasSrc
535
536 - The numbers of photons used to calculate fConc and fConc1 in
537 MHillasExt are now scaled with the pixel size, so that one get
538 a four times smaller value for the bigger pixels in the outer ring.
539
540 - added new task to smooth the camera contents (MCameraSmooth)
541
542 - added possibility to use interpolated pixel values for blind pixels
543 instead of removing it completely from the analysis
544
545 - Implemented the possibility to save the whole eventloop with
546 its setup to a file. This information can be read and from
547 it you can (re)create a Macro. See MEvtLoop::Read, MEvtLoop::Write
548 and MEvtLoop::MakeMacro. If you find something not working, please
549 report - this stuff is still in a beta phase.
550
551 - MBlindPixelCalc set all Ceta-Tauri pixels to unused not only for the
552 file having crab starfield, but also for all following files - fixed
553
554 - MTaskList::PrintStatistics can now be instructud to print also the
555 title, too: use PrintStatistics(0, kTRUE)
556
557 - Changed the image cleaning so that pixels with to many 'used'
558 neighbors are left used (to get rid of 'holes' in events)
559
560 - Introduced more output to the camera displays
561
562 - Added an array of histograms (eg one hist per run), MHArray
563
564 - Added a _preliminary_ version of the reader for CT1 PreProc files
565 (MCT1ReadPreProc)
566
567 - Fixed the error calculation of MHMCollectionArea and MHMcIntRate
568 (thanks to Raquel)
569
570 - added the first energy estimator (MEnergyEstParam, estimate.C,
571 estfit.C) using a parametrization
572
573 - Added some new Monte Carlo paremeter containers used to store
574 setup information from the MC chain (MMcConfigRunHeader,
575 MMcCorsikaRunHeader, MGeomPMT, MGeomMirror)
576
577
578
579 *** Version 0.7 (2002/04/30)
580
581 - added a bugfix to MCerPhotCalc. In older camera versions (<=40)
582 the pedestal mean value was saved incorrectly. For files from
583 this versions we substract 0.5 from the pedestal mean.
584 WARNING: This may effect your results, so don't wonder...
585
586 - First implementation of an algorithm using only triggered events
587 for the collection area calculation
588
589 - Ascii Output can now also be used for parameter containers which
590 doesn't overload MParCointainer::AsciiWrite
591
592 - The Ascii Output is now also capable of writing single data members
593 of one container
594
595 - You are now able to change the order of the values written to the
596 ascii file
597
598 - You can now specify a conversion factor for each data member written
599 to an ascii file. This may be usefull to change the units of the
600 data member (eg. degrees instead of millimeters in case of the
601 hillas parameters)
602
603 - Replaced old MHillas by a new structure which allows you to extend
604 the parameters stored in MHillas very easily:
605 see MHillas and MHillasExt
606
607 - Added classes to handle source dependancy of image parameters:
608 see MHillasSrc
609
610 - Added container (MBinning) to have a standard input for the binning
611 in different histograms (eg. the Energy bins should be the same in
612 all histograms)
613
614 - Changed Hillas histograms from mm to deg
615
616 - Added the flexible binning to the hillas histograms
617
618 - Added a filter for the alpha parameter (MFAlpha)
619
620 - It is now possible to write single data members of a class object to
621 an output stream instead of the whole container only
622
623 - Added a generalized filter for a data member:
624 MFDataMember filter("MHillas.fWidth", '<', 0.5);
625
626 - Added a generalized Filter parser for more difficult filter rules
627 MF filter("MHillas.fWidth<0.5 && MHillas.fLength>0.5");
628
629 - Added new Monte Carlo histograms:
630 MHMcEnergyImpact and MHMcEfficiency
631
632 - Added many new histograms needed for the flux calculation.
633
634 - Added a generalized histograms which can fill and show up to three
635 data members in either a one-, two- or three-dimensional histogram, eg:
636 MH3 mh3("MHillas.fWidth", "MHillas.fLength");
637
638 - Added:
639 * calculation of <Theta> as a function of Theta (MHThetabarTheta)
640 * calculation of <Theta> as a function of time (MHThetabarTime)
641 they are needed in the flux calculation in
642 order to select for a given bin in Theta (or time) the appropriate
643 effective collection area, which is assumed to be given as a function
644 of Theta and the true energy
645
646 - Added calculation of the migration matrix in the energy
647 (MHMcEnergyMigration):
648 the migration matrix describes the migration from the true (E_true)
649 to the estimated energy (E_est); it is needed to determine the
650 distribution of E_true from the measured distribution of E_est
651 by unfolding
652
653 - changed the color palette in the camera display to DeapSea.
654
655
656
657 *** Version 0.6 (2002/01/15)
658
659 - Introduce the option of disable pixels (MBlindPixels and
660 MBlindPixelCalc) for the analysis (eg MHillasCalc) to be
661 able to deal with Star Field NSB.
662
663 - Fixed a bug in the pedestals substraction
664
665 - Introduced verbosity levels
666
667 - Introduced a task (MReadMarsFile) which reads the RunHeader tree, too.
668
669 - Fixed several bugs in MFTriggerLvl1 which caused to filter not to
670 work correctly (thanks to Abelardo)
671
672 - Introduced correct treatment of the diffuse Night Sky Background
673 and NSB (MMcPedestalNSB)
674
675 - Corrected treatment of the electronic noise (MMcPedestalCopy)
676
677 - Introduced MMcRunHeaders which contains monte carlo run informations
678
679 - Added a 'Print'-Task (MPrint) which calls the Print function
680 of a parameter container for each event
681
682 - Removed MHtml (was replaced by THtml of root 3.02) in dohtml.C
683
684 - changes to be more efficient with root 3.02/06
685
686 - root 3.02/06 fixes:
687 + the memory leak when reading MRawEvtData
688 + loosing more time than necessary to update the progress bar
689
690 - MWriteAsciiFile is now capable of writing more than one container
691 in a line. For example: To be able to write Monte Carlo and
692 Hillas values (energy and alpha) in one line.
693
694
695
696 *** Version 0.5 (2001/11/06)
697
698 - Added new GUI functionality (Analysis)
699
700 - Added a camera display to be able to display events in the camera
701 together with the calculated hillas ellipse
702
703 - Added a 'Clone'-Task (MClone) which can clone a parameter container
704 object at any state of the analysis, so that the output are several
705 states
706
707 - Fixed a bug in the collection area error calculation
708 (Thanks to Ciro and Abelardo)
709
710 - Fixed a bug which causes merpp to crash in some environments
711
712 - Implemented auto enabling scheme for Branches to speed up reading
713 a lot (see MReadTree and MTask)
714
715 - Fixed a bug in the Histogram classes which caused histograms to
716 be written to a file by MWriteRootFile without request
717
718 - changed the object I/O from the old stylish root I/O to the new
719 'auto evolution scheme' This was done only for classes which are not
720 yet used in Monte Carlo files, so that these files are still readable.
721
722 - Added support for a progress bar in MEvtLoop and MReadTree
723 (see the Analysis Window in Mars for an example)
724
725 - Fixed a bug in the package creation which disturbed the conversion
726 between a mars version unpacked from a tar file and the repository.
727
728 - Changed the code to writer merpped (converted into root format)
729 raw files, to get faster (around 10%)
730
731
732
733 *** Version 0.4 (2001/09/20)
734
735 - This release is made to compile on a root version >= 3.00
736
737 - Fixed a bug which causes MReadTree to read the first file only
738
739 - Added a task to compute the trigger rate (MMcTriggerRateCalc)
740
741 - Added a task to write a container to an Ascii file (MWriteAsciiFile)
742
743 - Added a task to write several container to a root file (MWriteRootFile)
744
745 - Added calculation of the Enegry Threshold (MMcThresholdCalc)
746
747 - Added calculation of the collection area (MMcCollectionAreaCalc)
748
749 - fixed some bugs in the Hillas calculation
750
751 - added filters to be able to control the task execution dependent on
752 a parameter (for example: the number of level 1 triggers in a MC-file)
753
754
755
756 *** Version 0.3 (2001/04/23)
757
758 - Many demo macros added
759
760 - MCT1ReadAscii is now able to handle more than one file (s. ::AddFile)
761
762 - Hillas Calculation added
763
764 - Standard image cleaning available
765
766 - MReadTree is now able to handle more than one file
767 (Remark: of the same structure)
768
769 - Now we are able to display events in a first version of the
770 Camera event display. To do this we must run the macro
771 "macros/readCT1.C" to read data from CT1.
772
773
774
775 *** Version 0.2 (2001/01/24)
776
777 - First Implementation of a Gui to read the raw data. Start the
778 gui with the command mars.
779
780
781
782 *** Version 0.1 (2000/12/20)
783
784 - First official release 0.1
785
786 - Changes:
787
788 + changed calling style of MRawPixelIterator from do...while to
789 while-loop
790
Note: See TracBrowser for help on using the repository browser.