source: trunk/MagicSoft/Mars/NEWS@ 6874

Last change on this file since 6874 was 6874, checked in by tbretz, 20 years ago
*** empty log message ***
File size: 28.6 KB
Line 
1 -*-*- END -*-*-
2 *** Version <cvs>
3
4 - Calibration is now done autmatically into equiv. photo-electrons like
5 decided by the Collaboration Board
6
7 - Reference lines in the display can be read from resource file
8
9 - Interlaced calibration events can be handled by callisto
10
11 - High-Gain vs. Low-Gain calibration constants can be calculated
12 (but not yet applied) in callisto.
13
14 - class MJCalibTest can be called by callisto
15
16 - interpolated pointing positions are now in Tree "Events" after
17 calibration
18
19 - callisto can now run with three data types: rawdata, rootdata, MC
20
21 - added two classes mreport/MReportStarguider.cc and
22 mreport/MReportStarguider.h for implementing starguider-data
23
24 - the output of merpp-update now contains starguider information:
25 MReportStarguider and MTimeStarguider
26
27 - Fixed bug in MHHadronness.cc which made that the displayed Q-factor
28 values were lower than they should. This was more visible for high
29 energy (Size) events.
30
31 - Made MExtractTimeAndChargeDigitalFilter the default for callisto
32
33 - added a new loop to callisto to support the correct extraction of
34 the pedestal and pedestal rms through the signal extractor
35
36 - added class to perform fourier tranformation of a hexagonal structure
37 (MHexagonalFT)
38
39 - added class to perform fourier tranformation of a hexagonal structure
40 in a tasklist (MHexagonalFTCalc) example: hft.C
41
42 - added class to enhance the MCerPhotEvt from the Magic camera geometry
43 MGeomCamMagic to a enhanced geometry MGeomCamMagicXT having only
44 small pixels, example: extendcam.C
45
46 - added possibility to write data to memory (TTree) using MWriteRootFile
47
48 - added possibility to read a TTree stored only in memory by MReadTree
49
50 - new classes to deal with the interleaved calibration events:
51 MTriggerPattern, MTriggerPatternDecode and MFTriggerPattern
52
53 - implemented filters to callisto to skip calibration events
54
55 - changed callisto to calculate three kinds of pedestals and pedestal rms:
56 + fundamental pedestal (MPedPhotFundamental): extracted directly from
57 the slices by statistics
58 + pedestal from extractor (MPedPhotFromExtractor): extracted with the
59 signal extractor without randomization
60 + random pedestal from extractor (MPedPhotFromExtractorRndm): extracted
61 with the signal extractor with randomization (extraction window is
62 randomly fixed)
63 The three kind of pedestal is not yet implemented (for speed reasons) as
64 long as nobody really needs it:
65 + pedestal from extractor with randomizatiuon (MPedPhotFromExtractorRndm):
66 extracted with the signal extractor with randomization
67
68 - implemented data reduction in calibrated data by reducing the precision
69 of the stored floating point values (pedestal, rms and signal) to
70 roughly 0.5%
71
72 - fixed showplot to make file format conversion (eg. converting a
73 status display stored in a root file into a postscript file) in
74 batch mode possible:
75 showplot -b --save-as-ps[=outfile.ps] infile.root
76
77 - Allow class names as part of filter rules, eg
78 (MFSupercuts) && (MHillas.fSize>100)
79
80 - fixed a lot of stuff to allow all programs to process MonteCarlo
81 camera files.
82
83 - enhanced possibility to debug reading of resource file
84
85 - MDataChain should handle priorities of operator more
86 accurate now
87
88 - completely revised the container in which the signal is stored
89 MCerPhotEvt/Pix, MArrivalTime --> MSignalCam/Pix
90 * the new implementation is faster and
91 * needs less storage space
92
93 - FIRST version which can process Monte Carlos through the
94 whole chain of programs (callisto, star, etc)
95
96 - implemented new image parameters for the border length of
97 the shower image (MNewImagePar2)
98
99 - implemented wobble-mode in ganymed
100
101
102
103 *** Version 0.8.6 (2004/10/05)
104
105 - New combined signal and time extractor
106 MExtractTimeAndChargeDigitalFilter
107
108 - The Report for the trigger section in the CC run summary has been
109 updated, and now the IPRs (Individual Pixel Rates) are available.
110
111 - new macros for database interaction: filldotrun.C, filldotrbk.C
112
113 - added new program which can convert colored output which was redirected
114 into a file back into colored text (for example to display it with
115 more): showlog
116
117 - added new program to display an MStatusArray of plots (stored with
118 MStatusDisplay) from a file: showplot
119
120 - Added support for Sequences (MSequence). Sequences are blocks of run
121 files containing the same calibration and belonging to the same
122 source
123
124 - Added a new task (MTaskEnv) which can be used in setup files to switch
125 between different tasks (for example to choose a signal extractor)
126
127 - Implemented automatic file splitting in MWriteRootFile
128
129 - After image cleaning an island index is assigned to all used pixels.
130 The index corresponds to the order of the islands in size.
131
132 - added a cleaning which takes signal height _and_ arrival time into
133 account: probability cleaning (for more details see MImgCleanStd)
134
135 - added a cleaning which takes takes the absolute number of photons
136 times the area ratio as cleaning level
137 (for more details see MImgCleanStd)
138
139 - Changed calculation of image parameters such, that it can be done
140 for all used pixels or the pixels with a defined island index only
141
142 - implemented new image parameters displaying the number of islands,
143 saturated hi-gain and lo-gain pixels (MImagePar, MHImagePar)
144
145 - event display in executable changed to support also calibrated files
146 (done with MJCalibrateSignal)
147
148 - added program doing the calibration and the signal extraction
149 and signal calibration: callisto Most part of the setup is done
150 by a resource file: callisto.rc
151
152 - implemented support for pixels with negative IDs (Raw file format
153 version 4)
154
155 - implemented an new option in merpp (--auto-time) to get the time
156 range for cc and/or caco data from the run header of the raw data
157
158 - New star-program (star and MJStar). Taking calibrated data from
159 callisto/MJCalibrateSignal as input. The setup is done through
160 a resource file: star.rc
161
162 - Added possibility to setup the eventloop in the mars-executable
163 Camera Display by a resource file: mars.rc
164
165 - The the mars-executable Camera Display can now also read
166 calibrated data files written by callisto/MJCalibrateSignal
167
168 - Added a new class which can calculate the source position in
169 the camera from a pointing model known to be correct and
170 the pointing model used for observations (MSrcPosFromModel)
171
172 - added a new version of the class calculating the effective on-time
173 MHEffectiveOnTime. It unifies the old classes MHEffOnTime,
174 MHEffOnTimeTime, MHEffOnTimeTheta, MHTimeDiff, MHTimeDiffTime and
175 MHTimeDiffTheta.
176
177 - added the possibility to count how often a signal is above (or
178 below) a certain threshold in MHCamEvent and MHCamEventRot (this
179 can replace MHTriggerLvl0)
180
181 - added ore convinient ways to set the axis-titles of your histograms
182 in your macro to some MH-classes like: MH3, MHVsTime, MHSectorVsTime,
183 MHPixVsTime, MHVsTime, MHCamEvent and MHCamEventRot
184
185
186
187 *** Version 0.8.5 (2004/08/06)
188
189 - new Signal Extractors: MExtractFixedWindowSpline
190 and MExtractAmplitudeSpline
191
192 - implementes interleave in merpp to be able to merpp parts of a file
193
194 - implemented force-functionality to merpp
195
196 - star display to display star catalogs (MAstroCatalog)
197
198 - star display to 'mirror' stars to the camera (MAstroCamera)
199
200 - implemented a new cleaning option which allows cleaning scaled with
201 the real ratio of the rms depending on the pixel size, not only the
202 square root of the pixelsize (MImgCleanStd, MCameraData)
203
204 - removed obsolete MBlind* classes
205
206 - Signal extractor taking the AB flag into account implemented (this makes
207 an odd number of slices for signal extraction possible
208 (MExtractSignalABcorr)
209
210 - implemented a class extracting the pedestal from the raw-data (events)
211 itself using empty lo-gain (MpedCalcFromLoGain)
212
213 - Added mean values to MPedPhotCam
214
215 - Added Makefile for Darwin (this OS is NOT officially supported!)
216
217
218
219 *** Version 0.8.4 (2004/04/19)
220
221 - new fast arrival time extractor using cubic splines:
222 MExtractTimeFastSpline
223
224 - implementes multi-argument support in MDataChain
225 ("pow(a, b)")
226
227 - implemented double reference support in MDataChain
228 ("MCameraLV.fPowerSupplyA.fVoltagePos5V")
229
230 - added support in MF for expressiond like
231 "MHillas.fWidth<2*<MHillas.fLength"
232
233 - MDataChain is now able to support variables like [0], [1], ...
234 which can be used in fit functions as parameters. The interface
235 is implemented through the new virtual function
236 MParContainer::SetVariables
237
238 - added new class MArrivalTimeCam/MArrivalTimePix:
239 Storage containers to hold the ArrivalTime of the camera/pixel
240
241 - added new classes for the calibration of relative arrival times:
242 MCalibrationRelTimePix and MCalibrationRelTimeCam
243
244 - added new classes to extract the signal of the blind pixel and the
245 PIN Diode separately: MExtractBlindPixel and MExtractPINDiode
246
247 - added new classes for the bad-pixels treatment (MBadPixels*)
248 which are more powerfull than the old ones (MBlindPixel*)
249 and will replace them.
250
251 - added filter against cosmics: MFCosmics
252
253 - added new class MArrivalTimeCalc2:
254 Calculates the arrival time as the signal weighted mean of the time
255 slices in the maximum window
256
257 - added a new macro call pointspreadfucntion.C that fits with a 2D
258 gaussian the DC spot for an star. It gives you the RMS of
259 the PSF and the center of the star, very useful for misspointing
260 studies.
261
262 - added support for multi-telescope camera files. Added classes
263 MStereoCalc and MStereoPar, classes to calculate and store shower
264 parameters calculated from the data of two telescopes, for the MC
265 studies regarding the MAGIC clone.
266
267 - added MMcCalibrationCalc, MMcCalibrationUpdate, classes to obtain
268 MC data calibrated in photons instead of ADC counts.
269
270 - added three macros to show the calibration and analysis chain of
271 MC data. The macro starmc.C does both calibration and analysis, producing
272 an output containing Hillas parameters for each event. The macro
273 mccalibrate.C does just the calibration and writes out a file containing
274 pixel information in photons instead of FADC data. The macro starmc2.C
275 reads in such a file and produces an output with Hillas parameters.
276
277 - added MPedPhotCalc to compute pedestals in units of photons, see
278 macro pedphotcalc.C
279
280 - added all class to perform the calibration, see macro calibration.C
281
282 - added class MFFT to perform Fast Fourier Transforms
283
284 - added class MSimulatedAnnealing to perform simulated annealing
285 minimizations
286
287 - added new macro bootcampstandardanalysis.C which holds the skeleton
288 of the analysis chain discussed in the december bootcamp.
289
290 - added support for DAQ raw data file format V2
291
292 - implemented an arbitrary time stamp for the events from raw-data
293 files with file version<3. It is calculated from the run number,
294 the date of start and the FADC clock tick from the first module
295
296 - implemented the correct decoding of the event time-stamp
297 coming from the DAQ for raw-data files with file-version>2
298
299 - added a new classes storing the pedestals in units of photons:
300 MPedPhotPix, MPedPhotCam
301
302 - added support for DC current files from the camera control
303
304 - added support for start- and stop-time when merpping report files
305
306 - added MReportCC storing the weather data from the CC-REPORT
307
308 - added class to fill trainings and test matrices (MTFillMatrix)
309
310 - added a filter performing a software trigger (MFSoftwareTrigger)
311
312 - Added classes to perform parts of the standard analysis (Jobs):
313 + MJPedestals
314 + MJCalibration
315 + MJExtractSignal
316 Note: All of them are preliminary!
317
318 - Added Iterator to iterate over files giving only the run-number
319
320 - Added class (MHSectorVsTime) and example (sectorvstime.C) to plot
321 the evolution of a sector vs time
322
323
324
325 *** Version 0.8.3 (2003/12/05)
326
327 - adapted Random Forest classes to allow the use with MC
328 multi-telescope files which can be produced with the coming
329 camera version 0.7.
330
331 - added classes to read and interprete central control report files
332 (Directory: mreport, Base-Class: MReport, Reader: MReportFileRead, ...)
333
334 - enhanced merpp (the executable) to support .raw and .rep files.
335
336 - added classes for light calibration (MCalibration* and
337 MHCalibration*) by Markus Gaug. Further work has to be and will
338 be done soon.
339
340 - Added a preliminary 'synchronizer' (MReadReports) which will
341 replace MReadMarsFile as soon as it is finished.
342
343 - Added a tutorial macro demonstrating how report files are merpped
344 and how they can be read from the root file in the correct order
345 of time (readrep.C)
346
347 - Added a generalized histogram (similar to MH3) called MVsTime
348 which allows to plot variables (or rules - MDataChain - of
349 variables) vs time. For an example have a look at tempvstime.C.
350
351 - Changed the name of the event trees:
352 + Events --> Events
353 + PedEvents --> Pedestals
354 + CalEvents --> Calibration
355
356 - changed name of MTime in the event trees from MRawEvtTime to MTime
357
358 - added displaying the sector indices to the mars event display
359
360 - Magic Online Analysis (MOnA) implemented in a first version
361 (see mona.cc, MOnlineDump and MOnlineDisplay)
362
363 - added classes to calculate event rate
364 (preliminary: MEventRateCalc, MEventRate)
365
366 - added new executable 'readdaq' to read *.raw files from the DAQ directly
367
368 - added classes dealing with the telescope pointing position (MPointing*)
369
370 - implemented the 'final' Mars time stamp based on some experiences with
371 the new 'Synchonizer'
372
373
374
375 *** Version 0.8.2 (2003/11/10)
376
377 - accelerated standard analysis by a factor of 6-8 ...
378 + doing precalculations in MGeomCam for the pixel area ratio
379 + creating a look up table for the single pixels in MCerPhotEvt
380
381 - added task to calculates weights in case you want to 'change'
382 the energy spectrum of a monte carlo file
383 (MMcWeightEnergySpecCalc - Great work from Marcos Lopez Moya)
384
385 - added a new executable star which implements the
386 star.C macro as precompiled executable. Currently a flexible
387 setup is not possible, but a 'input card' setup will follow.
388
389 - Starting to implement Multi-Telescope-Support based on the
390 upcomming camera version 0.7. The base for a general support
391 is implemented and the star-functionality is proven to work.
392
393 - Replaced Event-Display in and Camera-Display in the Mars GUI
394 executable by a more convinient display base on MStatusDisplay.
395
396 - fixed the algorithm for the blind pixel treatment (MBlindPixelCalc)
397
398
399
400 *** Version 0.8.1 (2003/10/20)
401
402 - added signal subtraction for pure on data by means of fitting
403 the background in the off region or by performing a combined
404 signal/background fit. Provides necessary histograms for
405 obtaining energy spectra and a light curve.
406
407 - added classes to perform and study the selection of the
408 2nd Level Trigger on MC data (example in triglvl2.C macro)
409
410 - added pedestal calculation
411
412 - implemented "democratic cleaning" (tail cut value proportional
413 to pixel area) according to Wolfgang's suggestion.
414
415 - added Sigmabar treatment (calculation and basic histogramming)
416
417 - added basic routines to apply padding
418
419 - added first implementation of MARS-based source visibility plotter
420 (needs to be linked against slalib, preliminary version)
421
422 - enhanced functionality of data chains: random numbers, conversion
423 functions and access to MHMatrix objects
424
425 - fixed some bugs in the CT1 Preproc file reader, which gave wrong
426 numbers under certain circumstances (runs with 0 events included)
427
428 - fixed a bug in the general filter MF (didn't work on some systems
429 at all)
430
431 - fixed a bug in chaining files, which caused the analysis to crash or
432 ignore files
433
434 - implemented more geometry classes describing the parameters used
435 to simulate the PMT camera
436
437 - added new Monte Carlo classes containing the setup of the different
438 programs in the MC chain.
439
440 - added a (preliminary) general task to evaluate chi-square of a given
441 parameter in an eventloop.
442
443 - first implementation of a container describing the observatory
444 location (Long, Lat, etc)
445
446 - added Random Forest - method for g/h-separation
447
448 - made compatible with the latest PRO version of root (3.04/02 and 3.05/07)
449 (this means, that it is compiling, but not yet fully tested)
450
451 - added a new status display which can show the present status
452 of histograms while an eventloop is running (MStatusDisplay,
453 an example can be found at status.C)
454
455 - reorganized directories:
456 classes describing the image --> mimage
457 classes containing Monte Carlo Histograms --> mhistmc
458 classes for Random Forest method --> mranforest
459
460 - added (event-)weights to fill histograms
461
462 - colors in logging output to screen
463
464 - changes to the Image Parameter declaration:
465 + moved fConc, fConc1 from MHillasSrc to MNewImagePar
466 + moved fNumUsedPix, fNumCorePix from MHillas to MNewImagePar
467 + MHillasExt now derives from MParContainer instead of MHillas
468 --> Files written with the old definition are more or less unreadable
469
470 - reading of reflector files
471
472 - display data from reflector files in the camera
473
474 - implemented currents (and display them in the camera)
475
476 - logarithmic scale in camera
477
478 - added class to iterate through directory contents (MDirIter)
479
480
481
482 *** Version 0.8 (2002/11/18)
483
484 - added all subdirectories as Include-Paths for ACLIC (s. rootlogon.C)
485
486 - corrected 48(!) wrong entries in the Next Neighbor table of the
487 Magic Camera (all in the inner part of the outer ring, mostly
488 missing a single NN)
489
490 - Fixed a bug in the table describing the Next Neighbours of the
491 CT1 camera (a pixel 127 doesn't exist and the pixel 126 didn't
492 have any neighbour)
493
494 - changed trigrate.C: now it calculates the pure NSB triggers from
495 a camera file (generated with no showers), so there is no need
496 to introduce them by hand in the BgR array (for more details
497 please ask Abelardo)
498
499 - added MHHadronness (and MHadronness) as a general facility to evaluate
500 the quality of a gamma-hadron seperation method
501
502 - changed MWriteAsciiFile to accept rules (MDataChain)
503
504 - Calls to MWriteAsciiFile::AddContainer and MWriteAsciiFile::AddRule
505 must be replaced by calles to MWriteAsciiFile::AddColumn and
506 MWriteAsciiFile::AddColumns. Be carefull, the arguments have slightly
507 changed.
508
509 - Implemented generalized event-matrices (one row per event)
510 (MHMatrix)
511
512 - implemented the one dimensional composite probabilities
513 (MHCompProb, MCompProbCalc, comprob.C)
514
515 - implemented the Multidimensional Distances (Next Neighbours, Kernel)
516 (MMultiDimDistCalc, multidimdist.C, multidimdist2.C, MHMatrix)
517
518 - Added a camera display displaying the pixel numbers to the
519 event display gui.
520
521 - Added Monte Carlo Informations to event display gui
522
523 - Changed the camera display to display the pixel numbering
524
525 - Added three buttons to the camera display to change the palette
526
527 - Added the number of used and core pixels after image cleaning
528 to MHillas
529
530 - Changed the algorithm used in MHillas according to TDAS 02-03
531
532 - Changed the Alpha range according to TDAS 02-03 to [-90°,90°]
533
534 - Changed the algorithm used in MHillasSrc according to TDAS 02-03
535
536 - Added fCosDeltaAlpha to MHillasSrc
537
538 - The numbers of photons used to calculate fConc and fConc1 in
539 MHillasExt are now scaled with the pixel size, so that one get
540 a four times smaller value for the bigger pixels in the outer ring.
541
542 - added new task to smooth the camera contents (MCameraSmooth)
543
544 - added possibility to use interpolated pixel values for blind pixels
545 instead of removing it completely from the analysis
546
547 - Implemented the possibility to save the whole eventloop with
548 its setup to a file. This information can be read and from
549 it you can (re)create a Macro. See MEvtLoop::Read, MEvtLoop::Write
550 and MEvtLoop::MakeMacro. If you find something not working, please
551 report - this stuff is still in a beta phase.
552
553 - MBlindPixelCalc set all Ceta-Tauri pixels to unused not only for the
554 file having crab starfield, but also for all following files - fixed
555
556 - MTaskList::PrintStatistics can now be instructud to print also the
557 title, too: use PrintStatistics(0, kTRUE)
558
559 - Changed the image cleaning so that pixels with to many 'used'
560 neighbors are left used (to get rid of 'holes' in events)
561
562 - Introduced more output to the camera displays
563
564 - Added an array of histograms (eg one hist per run), MHArray
565
566 - Added a _preliminary_ version of the reader for CT1 PreProc files
567 (MCT1ReadPreProc)
568
569 - Fixed the error calculation of MHMCollectionArea and MHMcIntRate
570 (thanks to Raquel)
571
572 - added the first energy estimator (MEnergyEstParam, estimate.C,
573 estfit.C) using a parametrization
574
575 - Added some new Monte Carlo paremeter containers used to store
576 setup information from the MC chain (MMcConfigRunHeader,
577 MMcCorsikaRunHeader, MGeomPMT, MGeomMirror)
578
579
580
581 *** Version 0.7 (2002/04/30)
582
583 - added a bugfix to MCerPhotCalc. In older camera versions (<=40)
584 the pedestal mean value was saved incorrectly. For files from
585 this versions we substract 0.5 from the pedestal mean.
586 WARNING: This may effect your results, so don't wonder...
587
588 - First implementation of an algorithm using only triggered events
589 for the collection area calculation
590
591 - Ascii Output can now also be used for parameter containers which
592 doesn't overload MParCointainer::AsciiWrite
593
594 - The Ascii Output is now also capable of writing single data members
595 of one container
596
597 - You are now able to change the order of the values written to the
598 ascii file
599
600 - You can now specify a conversion factor for each data member written
601 to an ascii file. This may be usefull to change the units of the
602 data member (eg. degrees instead of millimeters in case of the
603 hillas parameters)
604
605 - Replaced old MHillas by a new structure which allows you to extend
606 the parameters stored in MHillas very easily:
607 see MHillas and MHillasExt
608
609 - Added classes to handle source dependancy of image parameters:
610 see MHillasSrc
611
612 - Added container (MBinning) to have a standard input for the binning
613 in different histograms (eg. the Energy bins should be the same in
614 all histograms)
615
616 - Changed Hillas histograms from mm to deg
617
618 - Added the flexible binning to the hillas histograms
619
620 - Added a filter for the alpha parameter (MFAlpha)
621
622 - It is now possible to write single data members of a class object to
623 an output stream instead of the whole container only
624
625 - Added a generalized filter for a data member:
626 MFDataMember filter("MHillas.fWidth", '<', 0.5);
627
628 - Added a generalized Filter parser for more difficult filter rules
629 MF filter("MHillas.fWidth<0.5 && MHillas.fLength>0.5");
630
631 - Added new Monte Carlo histograms:
632 MHMcEnergyImpact and MHMcEfficiency
633
634 - Added many new histograms needed for the flux calculation.
635
636 - Added a generalized histograms which can fill and show up to three
637 data members in either a one-, two- or three-dimensional histogram, eg:
638 MH3 mh3("MHillas.fWidth", "MHillas.fLength");
639
640 - Added:
641 * calculation of <Theta> as a function of Theta (MHThetabarTheta)
642 * calculation of <Theta> as a function of time (MHThetabarTime)
643 they are needed in the flux calculation in
644 order to select for a given bin in Theta (or time) the appropriate
645 effective collection area, which is assumed to be given as a function
646 of Theta and the true energy
647
648 - Added calculation of the migration matrix in the energy
649 (MHMcEnergyMigration):
650 the migration matrix describes the migration from the true (E_true)
651 to the estimated energy (E_est); it is needed to determine the
652 distribution of E_true from the measured distribution of E_est
653 by unfolding
654
655 - changed the color palette in the camera display to DeapSea.
656
657
658
659 *** Version 0.6 (2002/01/15)
660
661 - Introduce the option of disable pixels (MBlindPixels and
662 MBlindPixelCalc) for the analysis (eg MHillasCalc) to be
663 able to deal with Star Field NSB.
664
665 - Fixed a bug in the pedestals substraction
666
667 - Introduced verbosity levels
668
669 - Introduced a task (MReadMarsFile) which reads the RunHeader tree, too.
670
671 - Fixed several bugs in MFTriggerLvl1 which caused to filter not to
672 work correctly (thanks to Abelardo)
673
674 - Introduced correct treatment of the diffuse Night Sky Background
675 and NSB (MMcPedestalNSB)
676
677 - Corrected treatment of the electronic noise (MMcPedestalCopy)
678
679 - Introduced MMcRunHeaders which contains monte carlo run informations
680
681 - Added a 'Print'-Task (MPrint) which calls the Print function
682 of a parameter container for each event
683
684 - Removed MHtml (was replaced by THtml of root 3.02) in dohtml.C
685
686 - changes to be more efficient with root 3.02/06
687
688 - root 3.02/06 fixes:
689 + the memory leak when reading MRawEvtData
690 + loosing more time than necessary to update the progress bar
691
692 - MWriteAsciiFile is now capable of writing more than one container
693 in a line. For example: To be able to write Monte Carlo and
694 Hillas values (energy and alpha) in one line.
695
696
697
698 *** Version 0.5 (2001/11/06)
699
700 - Added new GUI functionality (Analysis)
701
702 - Added a camera display to be able to display events in the camera
703 together with the calculated hillas ellipse
704
705 - Added a 'Clone'-Task (MClone) which can clone a parameter container
706 object at any state of the analysis, so that the output are several
707 states
708
709 - Fixed a bug in the collection area error calculation
710 (Thanks to Ciro and Abelardo)
711
712 - Fixed a bug which causes merpp to crash in some environments
713
714 - Implemented auto enabling scheme for Branches to speed up reading
715 a lot (see MReadTree and MTask)
716
717 - Fixed a bug in the Histogram classes which caused histograms to
718 be written to a file by MWriteRootFile without request
719
720 - changed the object I/O from the old stylish root I/O to the new
721 'auto evolution scheme' This was done only for classes which are not
722 yet used in Monte Carlo files, so that these files are still readable.
723
724 - Added support for a progress bar in MEvtLoop and MReadTree
725 (see the Analysis Window in Mars for an example)
726
727 - Fixed a bug in the package creation which disturbed the conversion
728 between a mars version unpacked from a tar file and the repository.
729
730 - Changed the code to writer merpped (converted into root format)
731 raw files, to get faster (around 10%)
732
733
734
735 *** Version 0.4 (2001/09/20)
736
737 - This release is made to compile on a root version >= 3.00
738
739 - Fixed a bug which causes MReadTree to read the first file only
740
741 - Added a task to compute the trigger rate (MMcTriggerRateCalc)
742
743 - Added a task to write a container to an Ascii file (MWriteAsciiFile)
744
745 - Added a task to write several container to a root file (MWriteRootFile)
746
747 - Added calculation of the Enegry Threshold (MMcThresholdCalc)
748
749 - Added calculation of the collection area (MMcCollectionAreaCalc)
750
751 - fixed some bugs in the Hillas calculation
752
753 - added filters to be able to control the task execution dependent on
754 a parameter (for example: the number of level 1 triggers in a MC-file)
755
756
757
758 *** Version 0.3 (2001/04/23)
759
760 - Many demo macros added
761
762 - MCT1ReadAscii is now able to handle more than one file (s. ::AddFile)
763
764 - Hillas Calculation added
765
766 - Standard image cleaning available
767
768 - MReadTree is now able to handle more than one file
769 (Remark: of the same structure)
770
771 - Now we are able to display events in a first version of the
772 Camera event display. To do this we must run the macro
773 "macros/readCT1.C" to read data from CT1.
774
775
776
777 *** Version 0.2 (2001/01/24)
778
779 - First Implementation of a Gui to read the raw data. Start the
780 gui with the command mars.
781
782
783
784 *** Version 0.1 (2000/12/20)
785
786 - First official release 0.1
787
788 - Changes:
789
790 + changed calling style of MRawPixelIterator from do...while to
791 while-loop
792
Note: See TracBrowser for help on using the repository browser.