source: tags/Mars-V0.9/NEWS@ 17357

Last change on this file since 17357 was 6880, checked in by tbretz, 20 years ago
*** empty log message ***
File size: 28.6 KB
Line 
1 -*-*- END -*-*-
2
3 *** Version 0.9 (2005/03/23)
4
5 - Calibration is now done autmatically into photo-electrons like
6 decided by the Collaboration Board
7
8 - Reference lines in the display can be read from resource file
9
10 - Interlaced calibration events can be handled by callisto
11
12 - Hi-Gain vs. Lo-Gain calibration constants can be calculated
13 and applied in callisto.
14
15 - class MJCalibTest can be called by callisto
16
17 - callisto can now run with three data types: rawdata, rootdata, MC
18
19 - added two classes mreport/MReportStarguider.cc and
20 mreport/MReportStarguider.h for implementing starguider-data
21
22 - the output of merpp-update now contains starguider information:
23 MReportStarguider and MTimeStarguider
24
25 - Fixed bug in MHHadronness.cc which made that the displayed Q-factor
26 values were lower than they should. This was more visible for high
27 energy (Size) events.
28
29 - Made MExtractTimeAndChargeDigitalFilter the default for callisto
30
31 - added a new loop to callisto to support the correct extraction of
32 the pedestal and pedestal rms through the signal extractor
33
34 - added class to perform fourier tranformation of a hexagonal structure
35 (MHexagonalFT)
36
37 - added class to perform fourier tranformation of a hexagonal structure
38 in a tasklist (MHexagonalFTCalc) example: hft.C
39
40 - added class to enhance the MCerPhotEvt from the Magic camera geometry
41 MGeomCamMagic to a enhanced geometry MGeomCamMagicXT having only
42 small pixels, example: extendcam.C
43
44 - added possibility to write data to memory (TTree) using MWriteRootFile
45
46 - added possibility to read a TTree stored only in memory by MReadTree
47
48 - new classes to deal with the interleaved calibration events:
49 MTriggerPattern, MTriggerPatternDecode and MFTriggerPattern
50
51 - implemented filters to callisto to skip calibration events
52
53 - changed callisto to calculate three kinds of pedestals and pedestal rms:
54 + fundamental pedestal (MPedPhotFundamental): extracted directly from
55 the slices by statistics
56 + pedestal from extractor (MPedPhotFromExtractor): extracted with the
57 signal extractor without randomization
58 + random pedestal from extractor (MPedPhotFromExtractorRndm): extracted
59 with the signal extractor with randomization (extraction window is
60 randomly fixed)
61 The three kind of pedestal is not yet implemented (for speed reasons) as
62 long as nobody really needs it:
63 + pedestal from extractor with randomizatiuon (MPedPhotFromExtractorRndm):
64 extracted with the signal extractor with randomization
65
66 - callisto now finds the pulse position in the data automatically
67
68 - implemented data reduction in calibrated data by reducing the precision
69 of the stored floating point values (pedestal, rms and signal) to
70 roughly 0.5%
71
72 - fixed showplot to make file format conversion (eg. converting a
73 status display stored in a root file into a postscript file) in
74 batch mode possible:
75 showplot -b --save-as-ps[=outfile.ps] infile.root
76
77 - Allow class names as part of filter rules, eg
78 (MFSupercuts) && (MHillas.fSize>100)
79
80 - fixed a lot of stuff to allow all programs to process MonteCarlo
81 camera files.
82
83 - enhanced possibility to debug reading of resource file
84
85 - MDataChain should handle priorities of operator more
86 accurate now
87
88 - completely revised the container in which the signal is stored
89 MCerPhotEvt/Pix, MArrivalTime --> MSignalCam/Pix
90 * the new implementation is faster and
91 * needs less storage space
92
93 - FIRST version which can process Monte Carlos through the
94 whole chain of programs (callisto, star, etc)
95
96 - implemented new image parameters for the border length of
97 the shower image (MNewImagePar2)
98
99 - implemented wobble-mode in ganymed
100
101 - new class (MJOptimize) taking care of all optimization processes
102
103
104
105 *** Version 0.8.6 (2004/10/05)
106
107 - New combined signal and time extractor
108 MExtractTimeAndChargeDigitalFilter
109
110 - The Report for the trigger section in the CC run summary has been
111 updated, and now the IPRs (Individual Pixel Rates) are available.
112
113 - new macros for database interaction: filldotrun.C, filldotrbk.C
114
115 - added new program which can convert colored output which was redirected
116 into a file back into colored text (for example to display it with
117 more): showlog
118
119 - added new program to display an MStatusArray of plots (stored with
120 MStatusDisplay) from a file: showplot
121
122 - Added support for Sequences (MSequence). Sequences are blocks of run
123 files containing the same calibration and belonging to the same
124 source
125
126 - Added a new task (MTaskEnv) which can be used in setup files to switch
127 between different tasks (for example to choose a signal extractor)
128
129 - Implemented automatic file splitting in MWriteRootFile
130
131 - After image cleaning an island index is assigned to all used pixels.
132 The index corresponds to the order of the islands in size.
133
134 - added a cleaning which takes signal height _and_ arrival time into
135 account: probability cleaning (for more details see MImgCleanStd)
136
137 - added a cleaning which takes takes the absolute number of photons
138 times the area ratio as cleaning level
139 (for more details see MImgCleanStd)
140
141 - Changed calculation of image parameters such, that it can be done
142 for all used pixels or the pixels with a defined island index only
143
144 - implemented new image parameters displaying the number of islands,
145 saturated hi-gain and lo-gain pixels (MImagePar, MHImagePar)
146
147 - event display in executable changed to support also calibrated files
148 (done with MJCalibrateSignal)
149
150 - added program doing the calibration and the signal extraction
151 and signal calibration: callisto Most part of the setup is done
152 by a resource file: callisto.rc
153
154 - implemented support for pixels with negative IDs (Raw file format
155 version 4)
156
157 - implemented an new option in merpp (--auto-time) to get the time
158 range for cc and/or caco data from the run header of the raw data
159
160 - New star-program (star and MJStar). Taking calibrated data from
161 callisto/MJCalibrateSignal as input. The setup is done through
162 a resource file: star.rc
163
164 - Added possibility to setup the eventloop in the mars-executable
165 Camera Display by a resource file: mars.rc
166
167 - The the mars-executable Camera Display can now also read
168 calibrated data files written by callisto/MJCalibrateSignal
169
170 - Added a new class which can calculate the source position in
171 the camera from a pointing model known to be correct and
172 the pointing model used for observations (MSrcPosFromModel)
173
174 - added a new version of the class calculating the effective on-time
175 MHEffectiveOnTime. It unifies the old classes MHEffOnTime,
176 MHEffOnTimeTime, MHEffOnTimeTheta, MHTimeDiff, MHTimeDiffTime and
177 MHTimeDiffTheta.
178
179 - added the possibility to count how often a signal is above (or
180 below) a certain threshold in MHCamEvent and MHCamEventRot (this
181 can replace MHTriggerLvl0)
182
183 - added ore convinient ways to set the axis-titles of your histograms
184 in your macro to some MH-classes like: MH3, MHVsTime, MHSectorVsTime,
185 MHPixVsTime, MHVsTime, MHCamEvent and MHCamEventRot
186
187
188
189 *** Version 0.8.5 (2004/08/06)
190
191 - new Signal Extractors: MExtractFixedWindowSpline
192 and MExtractAmplitudeSpline
193
194 - implementes interleave in merpp to be able to merpp parts of a file
195
196 - implemented force-functionality to merpp
197
198 - star display to display star catalogs (MAstroCatalog)
199
200 - star display to 'mirror' stars to the camera (MAstroCamera)
201
202 - implemented a new cleaning option which allows cleaning scaled with
203 the real ratio of the rms depending on the pixel size, not only the
204 square root of the pixelsize (MImgCleanStd, MCameraData)
205
206 - removed obsolete MBlind* classes
207
208 - Signal extractor taking the AB flag into account implemented (this makes
209 an odd number of slices for signal extraction possible
210 (MExtractSignalABcorr)
211
212 - implemented a class extracting the pedestal from the raw-data (events)
213 itself using empty lo-gain (MpedCalcFromLoGain)
214
215 - Added mean values to MPedPhotCam
216
217 - Added Makefile for Darwin (this OS is NOT officially supported!)
218
219
220
221 *** Version 0.8.4 (2004/04/19)
222
223 - new fast arrival time extractor using cubic splines:
224 MExtractTimeFastSpline
225
226 - implementes multi-argument support in MDataChain
227 ("pow(a, b)")
228
229 - implemented double reference support in MDataChain
230 ("MCameraLV.fPowerSupplyA.fVoltagePos5V")
231
232 - added support in MF for expressiond like
233 "MHillas.fWidth<2*<MHillas.fLength"
234
235 - MDataChain is now able to support variables like [0], [1], ...
236 which can be used in fit functions as parameters. The interface
237 is implemented through the new virtual function
238 MParContainer::SetVariables
239
240 - added new class MArrivalTimeCam/MArrivalTimePix:
241 Storage containers to hold the ArrivalTime of the camera/pixel
242
243 - added new classes for the calibration of relative arrival times:
244 MCalibrationRelTimePix and MCalibrationRelTimeCam
245
246 - added new classes to extract the signal of the blind pixel and the
247 PIN Diode separately: MExtractBlindPixel and MExtractPINDiode
248
249 - added new classes for the bad-pixels treatment (MBadPixels*)
250 which are more powerfull than the old ones (MBlindPixel*)
251 and will replace them.
252
253 - added filter against cosmics: MFCosmics
254
255 - added new class MArrivalTimeCalc2:
256 Calculates the arrival time as the signal weighted mean of the time
257 slices in the maximum window
258
259 - added a new macro call pointspreadfucntion.C that fits with a 2D
260 gaussian the DC spot for an star. It gives you the RMS of
261 the PSF and the center of the star, very useful for misspointing
262 studies.
263
264 - added support for multi-telescope camera files. Added classes
265 MStereoCalc and MStereoPar, classes to calculate and store shower
266 parameters calculated from the data of two telescopes, for the MC
267 studies regarding the MAGIC clone.
268
269 - added MMcCalibrationCalc, MMcCalibrationUpdate, classes to obtain
270 MC data calibrated in photons instead of ADC counts.
271
272 - added three macros to show the calibration and analysis chain of
273 MC data. The macro starmc.C does both calibration and analysis, producing
274 an output containing Hillas parameters for each event. The macro
275 mccalibrate.C does just the calibration and writes out a file containing
276 pixel information in photons instead of FADC data. The macro starmc2.C
277 reads in such a file and produces an output with Hillas parameters.
278
279 - added MPedPhotCalc to compute pedestals in units of photons, see
280 macro pedphotcalc.C
281
282 - added all class to perform the calibration, see macro calibration.C
283
284 - added class MFFT to perform Fast Fourier Transforms
285
286 - added class MSimulatedAnnealing to perform simulated annealing
287 minimizations
288
289 - added new macro bootcampstandardanalysis.C which holds the skeleton
290 of the analysis chain discussed in the december bootcamp.
291
292 - added support for DAQ raw data file format V2
293
294 - implemented an arbitrary time stamp for the events from raw-data
295 files with file version<3. It is calculated from the run number,
296 the date of start and the FADC clock tick from the first module
297
298 - implemented the correct decoding of the event time-stamp
299 coming from the DAQ for raw-data files with file-version>2
300
301 - added a new classes storing the pedestals in units of photons:
302 MPedPhotPix, MPedPhotCam
303
304 - added support for DC current files from the camera control
305
306 - added support for start- and stop-time when merpping report files
307
308 - added MReportCC storing the weather data from the CC-REPORT
309
310 - added class to fill trainings and test matrices (MTFillMatrix)
311
312 - added a filter performing a software trigger (MFSoftwareTrigger)
313
314 - Added classes to perform parts of the standard analysis (Jobs):
315 + MJPedestals
316 + MJCalibration
317 + MJExtractSignal
318 Note: All of them are preliminary!
319
320 - Added Iterator to iterate over files giving only the run-number
321
322 - Added class (MHSectorVsTime) and example (sectorvstime.C) to plot
323 the evolution of a sector vs time
324
325
326
327 *** Version 0.8.3 (2003/12/05)
328
329 - adapted Random Forest classes to allow the use with MC
330 multi-telescope files which can be produced with the coming
331 camera version 0.7.
332
333 - added classes to read and interprete central control report files
334 (Directory: mreport, Base-Class: MReport, Reader: MReportFileRead, ...)
335
336 - enhanced merpp (the executable) to support .raw and .rep files.
337
338 - added classes for light calibration (MCalibration* and
339 MHCalibration*) by Markus Gaug. Further work has to be and will
340 be done soon.
341
342 - Added a preliminary 'synchronizer' (MReadReports) which will
343 replace MReadMarsFile as soon as it is finished.
344
345 - Added a tutorial macro demonstrating how report files are merpped
346 and how they can be read from the root file in the correct order
347 of time (readrep.C)
348
349 - Added a generalized histogram (similar to MH3) called MVsTime
350 which allows to plot variables (or rules - MDataChain - of
351 variables) vs time. For an example have a look at tempvstime.C.
352
353 - Changed the name of the event trees:
354 + Events --> Events
355 + PedEvents --> Pedestals
356 + CalEvents --> Calibration
357
358 - changed name of MTime in the event trees from MRawEvtTime to MTime
359
360 - added displaying the sector indices to the mars event display
361
362 - Magic Online Analysis (MOnA) implemented in a first version
363 (see mona.cc, MOnlineDump and MOnlineDisplay)
364
365 - added classes to calculate event rate
366 (preliminary: MEventRateCalc, MEventRate)
367
368 - added new executable 'readdaq' to read *.raw files from the DAQ directly
369
370 - added classes dealing with the telescope pointing position (MPointing*)
371
372 - implemented the 'final' Mars time stamp based on some experiences with
373 the new 'Synchonizer'
374
375
376
377 *** Version 0.8.2 (2003/11/10)
378
379 - accelerated standard analysis by a factor of 6-8 ...
380 + doing precalculations in MGeomCam for the pixel area ratio
381 + creating a look up table for the single pixels in MCerPhotEvt
382
383 - added task to calculates weights in case you want to 'change'
384 the energy spectrum of a monte carlo file
385 (MMcWeightEnergySpecCalc - Great work from Marcos Lopez Moya)
386
387 - added a new executable star which implements the
388 star.C macro as precompiled executable. Currently a flexible
389 setup is not possible, but a 'input card' setup will follow.
390
391 - Starting to implement Multi-Telescope-Support based on the
392 upcomming camera version 0.7. The base for a general support
393 is implemented and the star-functionality is proven to work.
394
395 - Replaced Event-Display in and Camera-Display in the Mars GUI
396 executable by a more convinient display base on MStatusDisplay.
397
398 - fixed the algorithm for the blind pixel treatment (MBlindPixelCalc)
399
400
401
402 *** Version 0.8.1 (2003/10/20)
403
404 - added signal subtraction for pure on data by means of fitting
405 the background in the off region or by performing a combined
406 signal/background fit. Provides necessary histograms for
407 obtaining energy spectra and a light curve.
408
409 - added classes to perform and study the selection of the
410 2nd Level Trigger on MC data (example in triglvl2.C macro)
411
412 - added pedestal calculation
413
414 - implemented "democratic cleaning" (tail cut value proportional
415 to pixel area) according to Wolfgang's suggestion.
416
417 - added Sigmabar treatment (calculation and basic histogramming)
418
419 - added basic routines to apply padding
420
421 - added first implementation of MARS-based source visibility plotter
422 (needs to be linked against slalib, preliminary version)
423
424 - enhanced functionality of data chains: random numbers, conversion
425 functions and access to MHMatrix objects
426
427 - fixed some bugs in the CT1 Preproc file reader, which gave wrong
428 numbers under certain circumstances (runs with 0 events included)
429
430 - fixed a bug in the general filter MF (didn't work on some systems
431 at all)
432
433 - fixed a bug in chaining files, which caused the analysis to crash or
434 ignore files
435
436 - implemented more geometry classes describing the parameters used
437 to simulate the PMT camera
438
439 - added new Monte Carlo classes containing the setup of the different
440 programs in the MC chain.
441
442 - added a (preliminary) general task to evaluate chi-square of a given
443 parameter in an eventloop.
444
445 - first implementation of a container describing the observatory
446 location (Long, Lat, etc)
447
448 - added Random Forest - method for g/h-separation
449
450 - made compatible with the latest PRO version of root (3.04/02 and 3.05/07)
451 (this means, that it is compiling, but not yet fully tested)
452
453 - added a new status display which can show the present status
454 of histograms while an eventloop is running (MStatusDisplay,
455 an example can be found at status.C)
456
457 - reorganized directories:
458 classes describing the image --> mimage
459 classes containing Monte Carlo Histograms --> mhistmc
460 classes for Random Forest method --> mranforest
461
462 - added (event-)weights to fill histograms
463
464 - colors in logging output to screen
465
466 - changes to the Image Parameter declaration:
467 + moved fConc, fConc1 from MHillasSrc to MNewImagePar
468 + moved fNumUsedPix, fNumCorePix from MHillas to MNewImagePar
469 + MHillasExt now derives from MParContainer instead of MHillas
470 --> Files written with the old definition are more or less unreadable
471
472 - reading of reflector files
473
474 - display data from reflector files in the camera
475
476 - implemented currents (and display them in the camera)
477
478 - logarithmic scale in camera
479
480 - added class to iterate through directory contents (MDirIter)
481
482
483
484 *** Version 0.8 (2002/11/18)
485
486 - added all subdirectories as Include-Paths for ACLIC (s. rootlogon.C)
487
488 - corrected 48(!) wrong entries in the Next Neighbor table of the
489 Magic Camera (all in the inner part of the outer ring, mostly
490 missing a single NN)
491
492 - Fixed a bug in the table describing the Next Neighbours of the
493 CT1 camera (a pixel 127 doesn't exist and the pixel 126 didn't
494 have any neighbour)
495
496 - changed trigrate.C: now it calculates the pure NSB triggers from
497 a camera file (generated with no showers), so there is no need
498 to introduce them by hand in the BgR array (for more details
499 please ask Abelardo)
500
501 - added MHHadronness (and MHadronness) as a general facility to evaluate
502 the quality of a gamma-hadron seperation method
503
504 - changed MWriteAsciiFile to accept rules (MDataChain)
505
506 - Calls to MWriteAsciiFile::AddContainer and MWriteAsciiFile::AddRule
507 must be replaced by calles to MWriteAsciiFile::AddColumn and
508 MWriteAsciiFile::AddColumns. Be carefull, the arguments have slightly
509 changed.
510
511 - Implemented generalized event-matrices (one row per event)
512 (MHMatrix)
513
514 - implemented the one dimensional composite probabilities
515 (MHCompProb, MCompProbCalc, comprob.C)
516
517 - implemented the Multidimensional Distances (Next Neighbours, Kernel)
518 (MMultiDimDistCalc, multidimdist.C, multidimdist2.C, MHMatrix)
519
520 - Added a camera display displaying the pixel numbers to the
521 event display gui.
522
523 - Added Monte Carlo Informations to event display gui
524
525 - Changed the camera display to display the pixel numbering
526
527 - Added three buttons to the camera display to change the palette
528
529 - Added the number of used and core pixels after image cleaning
530 to MHillas
531
532 - Changed the algorithm used in MHillas according to TDAS 02-03
533
534 - Changed the Alpha range according to TDAS 02-03 to [-90°,90°]
535
536 - Changed the algorithm used in MHillasSrc according to TDAS 02-03
537
538 - Added fCosDeltaAlpha to MHillasSrc
539
540 - The numbers of photons used to calculate fConc and fConc1 in
541 MHillasExt are now scaled with the pixel size, so that one get
542 a four times smaller value for the bigger pixels in the outer ring.
543
544 - added new task to smooth the camera contents (MCameraSmooth)
545
546 - added possibility to use interpolated pixel values for blind pixels
547 instead of removing it completely from the analysis
548
549 - Implemented the possibility to save the whole eventloop with
550 its setup to a file. This information can be read and from
551 it you can (re)create a Macro. See MEvtLoop::Read, MEvtLoop::Write
552 and MEvtLoop::MakeMacro. If you find something not working, please
553 report - this stuff is still in a beta phase.
554
555 - MBlindPixelCalc set all Ceta-Tauri pixels to unused not only for the
556 file having crab starfield, but also for all following files - fixed
557
558 - MTaskList::PrintStatistics can now be instructud to print also the
559 title, too: use PrintStatistics(0, kTRUE)
560
561 - Changed the image cleaning so that pixels with to many 'used'
562 neighbors are left used (to get rid of 'holes' in events)
563
564 - Introduced more output to the camera displays
565
566 - Added an array of histograms (eg one hist per run), MHArray
567
568 - Added a _preliminary_ version of the reader for CT1 PreProc files
569 (MCT1ReadPreProc)
570
571 - Fixed the error calculation of MHMCollectionArea and MHMcIntRate
572 (thanks to Raquel)
573
574 - added the first energy estimator (MEnergyEstParam, estimate.C,
575 estfit.C) using a parametrization
576
577 - Added some new Monte Carlo paremeter containers used to store
578 setup information from the MC chain (MMcConfigRunHeader,
579 MMcCorsikaRunHeader, MGeomPMT, MGeomMirror)
580
581
582
583 *** Version 0.7 (2002/04/30)
584
585 - added a bugfix to MCerPhotCalc. In older camera versions (<=40)
586 the pedestal mean value was saved incorrectly. For files from
587 this versions we substract 0.5 from the pedestal mean.
588 WARNING: This may effect your results, so don't wonder...
589
590 - First implementation of an algorithm using only triggered events
591 for the collection area calculation
592
593 - Ascii Output can now also be used for parameter containers which
594 doesn't overload MParCointainer::AsciiWrite
595
596 - The Ascii Output is now also capable of writing single data members
597 of one container
598
599 - You are now able to change the order of the values written to the
600 ascii file
601
602 - You can now specify a conversion factor for each data member written
603 to an ascii file. This may be usefull to change the units of the
604 data member (eg. degrees instead of millimeters in case of the
605 hillas parameters)
606
607 - Replaced old MHillas by a new structure which allows you to extend
608 the parameters stored in MHillas very easily:
609 see MHillas and MHillasExt
610
611 - Added classes to handle source dependancy of image parameters:
612 see MHillasSrc
613
614 - Added container (MBinning) to have a standard input for the binning
615 in different histograms (eg. the Energy bins should be the same in
616 all histograms)
617
618 - Changed Hillas histograms from mm to deg
619
620 - Added the flexible binning to the hillas histograms
621
622 - Added a filter for the alpha parameter (MFAlpha)
623
624 - It is now possible to write single data members of a class object to
625 an output stream instead of the whole container only
626
627 - Added a generalized filter for a data member:
628 MFDataMember filter("MHillas.fWidth", '<', 0.5);
629
630 - Added a generalized Filter parser for more difficult filter rules
631 MF filter("MHillas.fWidth<0.5 && MHillas.fLength>0.5");
632
633 - Added new Monte Carlo histograms:
634 MHMcEnergyImpact and MHMcEfficiency
635
636 - Added many new histograms needed for the flux calculation.
637
638 - Added a generalized histograms which can fill and show up to three
639 data members in either a one-, two- or three-dimensional histogram, eg:
640 MH3 mh3("MHillas.fWidth", "MHillas.fLength");
641
642 - Added:
643 * calculation of <Theta> as a function of Theta (MHThetabarTheta)
644 * calculation of <Theta> as a function of time (MHThetabarTime)
645 they are needed in the flux calculation in
646 order to select for a given bin in Theta (or time) the appropriate
647 effective collection area, which is assumed to be given as a function
648 of Theta and the true energy
649
650 - Added calculation of the migration matrix in the energy
651 (MHMcEnergyMigration):
652 the migration matrix describes the migration from the true (E_true)
653 to the estimated energy (E_est); it is needed to determine the
654 distribution of E_true from the measured distribution of E_est
655 by unfolding
656
657 - changed the color palette in the camera display to DeapSea.
658
659
660
661 *** Version 0.6 (2002/01/15)
662
663 - Introduce the option of disable pixels (MBlindPixels and
664 MBlindPixelCalc) for the analysis (eg MHillasCalc) to be
665 able to deal with Star Field NSB.
666
667 - Fixed a bug in the pedestals substraction
668
669 - Introduced verbosity levels
670
671 - Introduced a task (MReadMarsFile) which reads the RunHeader tree, too.
672
673 - Fixed several bugs in MFTriggerLvl1 which caused to filter not to
674 work correctly (thanks to Abelardo)
675
676 - Introduced correct treatment of the diffuse Night Sky Background
677 and NSB (MMcPedestalNSB)
678
679 - Corrected treatment of the electronic noise (MMcPedestalCopy)
680
681 - Introduced MMcRunHeaders which contains monte carlo run informations
682
683 - Added a 'Print'-Task (MPrint) which calls the Print function
684 of a parameter container for each event
685
686 - Removed MHtml (was replaced by THtml of root 3.02) in dohtml.C
687
688 - changes to be more efficient with root 3.02/06
689
690 - root 3.02/06 fixes:
691 + the memory leak when reading MRawEvtData
692 + loosing more time than necessary to update the progress bar
693
694 - MWriteAsciiFile is now capable of writing more than one container
695 in a line. For example: To be able to write Monte Carlo and
696 Hillas values (energy and alpha) in one line.
697
698
699
700 *** Version 0.5 (2001/11/06)
701
702 - Added new GUI functionality (Analysis)
703
704 - Added a camera display to be able to display events in the camera
705 together with the calculated hillas ellipse
706
707 - Added a 'Clone'-Task (MClone) which can clone a parameter container
708 object at any state of the analysis, so that the output are several
709 states
710
711 - Fixed a bug in the collection area error calculation
712 (Thanks to Ciro and Abelardo)
713
714 - Fixed a bug which causes merpp to crash in some environments
715
716 - Implemented auto enabling scheme for Branches to speed up reading
717 a lot (see MReadTree and MTask)
718
719 - Fixed a bug in the Histogram classes which caused histograms to
720 be written to a file by MWriteRootFile without request
721
722 - changed the object I/O from the old stylish root I/O to the new
723 'auto evolution scheme' This was done only for classes which are not
724 yet used in Monte Carlo files, so that these files are still readable.
725
726 - Added support for a progress bar in MEvtLoop and MReadTree
727 (see the Analysis Window in Mars for an example)
728
729 - Fixed a bug in the package creation which disturbed the conversion
730 between a mars version unpacked from a tar file and the repository.
731
732 - Changed the code to writer merpped (converted into root format)
733 raw files, to get faster (around 10%)
734
735
736
737 *** Version 0.4 (2001/09/20)
738
739 - This release is made to compile on a root version >= 3.00
740
741 - Fixed a bug which causes MReadTree to read the first file only
742
743 - Added a task to compute the trigger rate (MMcTriggerRateCalc)
744
745 - Added a task to write a container to an Ascii file (MWriteAsciiFile)
746
747 - Added a task to write several container to a root file (MWriteRootFile)
748
749 - Added calculation of the Enegry Threshold (MMcThresholdCalc)
750
751 - Added calculation of the collection area (MMcCollectionAreaCalc)
752
753 - fixed some bugs in the Hillas calculation
754
755 - added filters to be able to control the task execution dependent on
756 a parameter (for example: the number of level 1 triggers in a MC-file)
757
758
759
760 *** Version 0.3 (2001/04/23)
761
762 - Many demo macros added
763
764 - MCT1ReadAscii is now able to handle more than one file (s. ::AddFile)
765
766 - Hillas Calculation added
767
768 - Standard image cleaning available
769
770 - MReadTree is now able to handle more than one file
771 (Remark: of the same structure)
772
773 - Now we are able to display events in a first version of the
774 Camera event display. To do this we must run the macro
775 "macros/readCT1.C" to read data from CT1.
776
777
778
779 *** Version 0.2 (2001/01/24)
780
781 - First Implementation of a Gui to read the raw data. Start the
782 gui with the command mars.
783
784
785
786 *** Version 0.1 (2000/12/20)
787
788 - First official release 0.1
789
790 - Changes:
791
792 + changed calling style of MRawPixelIterator from do...while to
793 while-loop
794
Note: See TracBrowser for help on using the repository browser.