Changeset 6408 for trunk/MagicSoft/TDAS-Extractor

Timestamp:

02/12/05 17:16:04 (20 years ago)

Author:

gaug

Message:

*** empty log message ***

File:

• trunk/MagicSoft/TDAS-Extractor/Criteria.tex (modified) (3 diffs)

trunk/MagicSoft/TDAS-Extractor/Criteria.tex

@@ -1 @@
-\section{Criteria for the Optimal Signal Extraction}
+\section{Criteria for the Optimal Signal Extraction (STILL TO DO!!)}
 
-\subsection{Resolution (amplitude and time)}
-\ldots {\textit{In this section, the jitter to exactly identical input pulses is measured, for times, amplitudes, 
-high-gain and low-gain pulses }}
-\begin{itemize}
-\item Jitter to pulpo pulses  \ldots Hendrik
-\item Comparing MC signal with and w/o noise of different intensity \ldots Nuria
-\item Jitter to pedestals (of different intensity) \ldots Hendrik
-\item Comparing the low-gain to high-gain ratio for different intensities \ldots Markus
-\item Derive the time jitter to calibration pulses \ldots Maxim ???
-\end{itemize}
-
-\subsection{Bias}
-\ldots {\textit In this section, the bias of the extractor for low and high intensities is defined and measured }
-\begin{itemize}
-\item Bias to pedestals (of different intensity) \ldots Hendrik
-\item Comparing MC signal with and w/o noise of different intensity \ldots Nuria
-\end{itemize}
-
-\subsection{Signal to Noise}
-\ldots {\textit In this section, the signal to noise of an extractor is determined, for times and amplitudes
-\newline \ldots Maxim ???, Thomas ???}
+\subsection{Resolution and Bias} 
+\ldots {\textit{The jitter to identical input pulses is measured, for times, amplitudes, 
+high-gain and low-gain pulses and different signal and background levels }}
 
 \subsection{Stability}
-\ldots {\textit In this section, the stability of an extractor to slightly varying pulse shapes is examined. }
+\ldots {\textit The stability of an extractor to slightly varying pulse shapes is examined. }
 \begin{itemize}
 \item Stability w.r.t. different weights files \ldots Hendrik
@@ -33 +15 @@
 
 \subsection{Linearity}
-\ldots {\textit In this section, the Nuria plots are examined \newline \ldots Nuria}
+\ldots {\textit The Nuria plots ... }
 
 \subsection{Treatment of Calibration Pulses}
@@ -39 +21 @@
 secondary pulses, possible secondary pulses from hadronic showers and the typical Cherenkov 
 pulses are extracted by the different extractors and typical dependencies examined, like the 
-Razmik plot, the number of photo-electrons with number of slices, comparisons between different colours, etc.
-\newline \ldots Hendrik??? , Markus???  + ????}
+Razmik plot, the number of photo-electrons with number of slices, comparisons between different colours, etc.}
 
 \subsection{Low Gain Extraction}
-\ldots {\textit In this section, the stability of the low-gain extraction w.r.t. the high-gain extraction is 
-examined. Useful plots are still to be defined.
-\newline \ldots Arnau ????}
+\ldots {\textit The stability of the low-gain extraction w.r.t. the high-gain extraction}
 
 \subsection{Applicability for Different Sampling Speeds / No Pulse Shaping.}
-\ldots {\textit In this section, some comments of Hendrik will be made}
+\ldots {\textit Some comments by Hendrik ...}
 
 \subsection{CPU Requirements}
-\ldots {\textit In this section, the needed CPU time is measured for each extractor independently }
-\newline \ldots {\textit ALL (after all)}
-
+\ldots {\textit The needed CPU time for each extractor}
 
 %%% Local Variables: 
 %%% mode: latex
 %%% TeX-master: "MAGIC_signal_reco"
-%%% TeX-master: "MAGIC_signal_reco"
 %%% End: