- Timestamp:
- 05/11/09 22:00:54 (16 years ago)
- File:
-
- 1 edited
Legend:
- Unmodified
- Added
- Removed
-
trunk/MagicSoft/Cosy/.cosyrc_magic2
r9430 r9444 10 10 # 'seen' by the Macs) 11 11 12 # CANbus Id of the three MACS. -1 means not connected. 13 # MAC1 is Azimuth-1 14 # MAC2 is Azimuth-2 15 # MAC is Zenith Angle 16 Az_Id: 1 17 Zd_Id: 3 12 Telescope: 2 18 13 19 # CANbus Id of the three Shaftencoders. 20 # SE1 is Zenith Angle-1 21 # SE2 is Zenith Angle-2 22 # SE is Azimuth 23 Az_Id-SE: 16 24 Zd_Id-SE1: 17 25 Zd_Id-SE2: 18 14 # Default from Cosy 15 # Az_Min[deg]: -95.0 16 # Zd_Min[deg]: -75.0 26 17 27 18 # Software endswitch … … 30 21 Az_Max[deg]: 316.0 31 22 Zd_Max[deg]: 100.01 23 24 # Max-Min set previously: 2 25 26 TPointLeds.File: leds_magic2.txt 27 TPointLeds.RadiusMin: 225.24 28 TPointLeds.RadiusMax: 235.24 29 TPointLeds.ArcsecPerPixel: 31.36 30 #TPointLeds.MinNumberLeds: 5 31 #TPointLeds.BoxSize: 19 32 #TPointLeds.CleaningLevel: 3.0 33 34 FindStar.SizeBox: 50 35 #FindStar.CleaningLevel: 3.0 36 37 StarguiderLeds.File: stargleds_magic2.txt 38 StarguiderLeds.RadiusMin: 152 39 StarguiderLeds.RadiusMax: 154 40 #StarguiderLeds.ArcsecPerPixel: 48.9 41 StarguiderLeds.MinNumberLeds: 3 42 #StarguiderLeds.BoxSize: 19 43 #StarguiderLeds.CleaningLevel: 3.0 44 45 Starguider.Width: 225 46 Starguider.Height: 280 47 Starguider.X: 540 48 Starguider.Y: 292 49 50 # Default offset between the camera center and the corresponding point 51 # on the sky. This value is just to make the starguider work. It has 52 # once to be adjusted as good as possible... but NEVER EVER change 53 # these values again! (Except you change the alignment of the ccd optics) 54 55 # Index Error from pointing model is +0.89 pix 56 Starguider.SkyOffsetX: 335 57 # Index Error from pointing model is -0.32 pix 58 Starguider.SkyOffsetY: 13.5 59 60 Leds.Radius: 2000 61 62 Starguider.RotationAngle: -0.2 63 Starguider.CleaningLevel: 3.0 64 65 #DefaultCameraChannel: 0 66 #IpAddressSPS: sps 67 #IpAddressCentralControl: 161.72.130.2 68 IpAddressPowerSwitch: powerswitch5 69 PointingModel: bending_magic2.txt 70 71 FilePredefinedPositions: prepos_magic2.txt
Note:
See TracChangeset
for help on using the changeset viewer.