Changeset 9444 for trunk/MagicSoft/Cosy/.cosyrc_magic2

Timestamp:

05/11/09 22:00:54 (15 years ago)

Author:

tbretz

Message:

*** empty log message ***

File:

• trunk/MagicSoft/Cosy/.cosyrc_magic2 (modified) (2 diffs)

trunk/MagicSoft/Cosy/.cosyrc_magic2

@@ -10 +10 @@
 # 'seen' by the Macs)
 
-# CANbus Id of the three MACS. -1 means not connected.
-# MAC1 is Azimuth-1
-# MAC2 is Azimuth-2
-# MAC  is Zenith Angle
-Az_Id:  1
-Zd_Id:  3
+Telescope: 2
 
-# CANbus Id of the three Shaftencoders.
-# SE1 is Zenith Angle-1
-# SE2 is Zenith Angle-2
-# SE  is Azimuth
-Az_Id-SE:  16
-Zd_Id-SE1: 17
-Zd_Id-SE2: 18
+# Default from Cosy
+# Az_Min[deg]: -95.0
+# Zd_Min[deg]: -75.0
 
 # Software endswitch
@@ -30 +21 @@
 Az_Max[deg]:  316.0
 Zd_Max[deg]:   100.01
+
+# Max-Min set previously: 2
+
+TPointLeds.File: leds_magic2.txt
+TPointLeds.RadiusMin: 225.24
+TPointLeds.RadiusMax: 235.24
+TPointLeds.ArcsecPerPixel: 31.36
+#TPointLeds.MinNumberLeds: 5
+#TPointLeds.BoxSize: 19
+#TPointLeds.CleaningLevel: 3.0
+
+FindStar.SizeBox: 50
+#FindStar.CleaningLevel: 3.0
+
+StarguiderLeds.File: stargleds_magic2.txt
+StarguiderLeds.RadiusMin: 152
+StarguiderLeds.RadiusMax: 154
+#StarguiderLeds.ArcsecPerPixel: 48.9
+StarguiderLeds.MinNumberLeds: 3
+#StarguiderLeds.BoxSize: 19
+#StarguiderLeds.CleaningLevel: 3.0
+
+Starguider.Width:        225
+Starguider.Height:       280
+Starguider.X:            540
+Starguider.Y:            292
+
+# Default offset between the camera center and the corresponding point
+# on the sky. This value is just to make the starguider work. It has 
+# once to be adjusted as good as possible... but NEVER EVER change
+# these values again! (Except you change the alignment of the ccd optics)
+
+# Index Error from pointing model is +0.89 pix
+Starguider.SkyOffsetX:   335
+# Index Error from pointing model is -0.32 pix
+Starguider.SkyOffsetY:   13.5
+
+Leds.Radius: 2000
+
+Starguider.RotationAngle: -0.2
+Starguider.CleaningLevel: 3.0
+
+#DefaultCameraChannel: 0
+#IpAddressSPS: sps
+#IpAddressCentralControl: 161.72.130.2
+IpAddressPowerSwitch: powerswitch5
+PointingModel: bending_magic2.txt
+
+FilePredefinedPositions: prepos_magic2.txt