source:

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @13256   13 years tbretz Set names for the dim services.
(edit) @13255   13 years tbretz Changed the resistance of the broken pixels to 390Ohm. Test yesterday ...
(edit) @13254   13 years tbretz Removed the stray Xs in the dim service names which were for debugging.
(edit) @13253   13 years tbretz
(edit) @13252   13 years tbretz Fixed a typo.
(edit) @13251   13 years tbretz Encapsulated the waiting for a state into proper switching off and on ...
(edit) @13250   13 years neise just a test
(edit) @13249   13 years tbretz Fixed the 'broken pixel' correction. The voltage was devided by the ...
(edit) @13248   13 years tbretz Plot the results of a ratescan from a slow control file.
(edit) @13247   13 years tbretz Load iomanip per default.
(edit) @13246   13 years neise deleted pyfact.py testing version, did not belong in svn
(edit) @13245   13 years neise new version ... with Feeder and Anaylsis .. do not use
(edit) @13244   13 years Jens Buss log output alignment
(edit) @13243   13 years Jens Buss log output alignment
(edit) @13242   13 years tbretz Updated some log-output.
(edit) @13241   13 years tbretz Added another sanity check for the output.
(edit) @13240   13 years tbretz Added a sanity check for the new output
(edit) @13239   13 years tbretz Propagate G-APD bias offset and set-point seperately.
(edit) @13238   13 years tbretz Updated to new biasctrl commands; removed some obsolete endl; reduced ...
(edit) @13237   13 years tbretz Updated to fit the new biasctrl command and services.
(edit) @13236   13 years tbretz Changed the code in a way that now it operates on floating point ...
(edit) @13235   13 years tbretz Decreased the serial resistance from 1150 Ohm to 1100 Ohm; fixed a ...
(edit) @13234   13 years neise commented out every plotting stuff, so I can use it at ISDC without X
(edit) @13233   13 years neise moved matplotlib import statement to __main__, so it is only imported, ...
(edit) @13232   13 years neise moved matplotlib import statement to __main__, so it is only imported, ...
(edit) @13231   13 years neise using math module instead of pylab ...
(edit) @13230   13 years neise moved matplotlib import statement to __main__, so it is only imported, ...
(edit) @13229   13 years neise still testing
(edit) @13228   13 years neise changes as discussed with werner ... not executable anymore
(edit) @13227   13 years neise evolving to the next level
(edit) @13226   13 years neise corrected typo
(edit) @13225   13 years tbretz Do not read more than the expected number of rows per default.
(edit) @13224   13 years tbretz Made the number of requests during calibration an option.
(edit) @13223   13 years tbretz Unintentionally changed the allowed states for TRACK_SOURCE with the ...
(edit) @13222   13 years tbretz Replaced W format by C for TRACK_SOURCE
(edit) @13221   13 years tbretz Added TrimQuotes
(edit) @13220   13 years tbretz Improved debugging output.
(edit) @13219   13 years Jens Buss changed waiting time before track command
(edit) @13218   13 years Jens Buss added check if bias, feedback, drive and fad are in the correct state ...
(edit) @13217   13 years tbretz Some improved debug output.
(edit) @13216   13 years tbretz Updated some FITS descriptions.
(edit) @13215   13 years Jens Buss short script to check if bias, feedback, drive and fad are in the ...
(edit) @13214   13 years Jens Buss added check before data run to assure that bias, feedback, drive and ...
(edit) @13213   13 years Jens Buss added check before data run to assure that bias, feedback, drive and ...
(edit) @13212   13 years tbretz Updated state names.
(edit) @13211   13 years tbretz Improves state handling.
(edit) @13210   13 years tbretz Removed all the unnecessary log-messages.
(edit) @13209   13 years tbretz Implemented fVerbose to switch verbosity of default messages on and off.
(edit) @13208   13 years tbretz Write comments as such.
(edit) @13207   13 years tbretz Addeda new log-class: comments
(edit) @13206   13 years tbretz Pipe comments to the log-file; added the missing jump label.
(edit) @13205   13 years lyard added fence from prevent column desc of messages services
(edit) @13204   13 years lyard added output to see which service creates column warning
(edit) @13203   13 years tbretz Updated the options.
(edit) @13202   13 years tbretz Updated the help text.
(edit) @13201   13 years tbretz Made DebugTx optional.
(edit) @13200   13 years tbretz Use Debug() when fDebugTx is enabled.
(edit) @13199   13 years tbretz Replaced wind direction by human readable strings.
(edit) @13198   13 years tbretz Replace degree value for wind direction with human readable value
(edit) @13197   13 years tbretz Shortened some dim descriptions.
(edit) @13196   13 years tbretz Shortened some dim descriptions.
(edit) @13195   13 years tbretz Shortened descriptions to make the datalogger more happy.
(edit) @13194   13 years tbretz Updated some dim descriptions; suppress unecessary output by default.
(edit) @13193   13 years tbretz Print AddService info only when it is really a service.
(edit) @13192   13 years tbretz Some improvement to header evaluation.
(edit) @13191   13 years tbretz Changed the default interval from 55s to 25s. Made it an option.
(edit) @13190   13 years tbretz Propagate max number of events and time correctly as signed int.
(edit) @13189   13 years tbretz Delay setting new volatges during current requests.
(edit) @13188   13 years Jens Buss changed the output
(edit) @13187   13 years Jens Buss changed the output
(edit) @13186   13 years Jens Buss resume data taking after it had to be aborted during first run of four
(edit) @13185   13 years Jens Buss spell check
(edit) @13184   13 years Jens Buss Script for Crab data taking, that automatically takes both wobble ...
(edit) @13183   13 years Jens Buss changed the time waited before sending commands to drivectrl
(edit) @13182   13 years neise included calculation of some more hillas parameters, still no unit ...
(edit) @13181   13 years neise added member, which contains numpy arrays instead of Vector2 objects. ...
(edit) @13180   13 years neise test functions are using Plotter class, and SignalGenerator class in ...
(edit) @13179   13 years tbretz Updated help text for '.s'
(edit) @13178   13 years tbretz Send current requests in current control mode only when voltage is ...
(edit) @13177   13 years neise initial commit of a script using the pyafact/image_extractors ...
(edit) @13176   13 years neise changed pyfact_rename to pyfact and switched on the tabulator checking
(edit) @13175   13 years neise introduced calculation of number of islands, but I did not want to ...
(edit) @13174   13 years neise Plotter was not correctly plotting the grid, introduced the plotting ...
(edit) @13173   13 years Daniela Dorner added (script to build sequences)
(edit) @13172   13 years Daniela Dorner added (crontab file for fact_opr on isdc-viewer00)
(edit) @13171   13 years Daniela Dorner improved output, fixed bugs
(edit) @13170   13 years tbretz Added checks for the consistency of the event and trigger number.
(edit) @13169   13 years tbretz Improved some debug output, removed obsolete SetMode; commented out ...
(edit) @13168   13 years tbretz Implemented a function for word wraping
(edit) @13167   13 years tbretz Moved read to cc file; implemented first version of a database interface.
(edit) @13166   13 years tbretz Make sure that the connection is the last in the configuration; ...
(edit) @13165   13 years tbretz Added some improved output.
(edit) @13164   13 years tbretz Implemented new command to set all offsets individually (for current ...
(edit) @13163   13 years tbretz Replaces all 416 by kNumChannels; send the correct command to set the ...
(edit) @13162   13 years Jens Buss DimScript for data taking, that only takes the 4 5min data runs, can ...
(edit) @13161   13 years Jens Buss DimScript for data taking MRK421, that automatically takes both wobble ...
(edit) @13160   13 years tbretz Some clean up to the commands.
(edit) @13159   13 years tbretz Assume that an empty folder name means '.'
(edit) @13158   13 years Daniela Dorner added insert to nightly status tables, removed insert for status ...
(edit) @13157   13 years ogrimm FSC resistances converted into temperature for online display
Note: See TracRevisionLog for help on using the revision log.