source:

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @13215   13 years Jens Buss short script to check if bias, feedback, drive and fad are in the ...
(edit) @13214   13 years Jens Buss added check before data run to assure that bias, feedback, drive and ...
(edit) @13213   13 years Jens Buss added check before data run to assure that bias, feedback, drive and ...
(edit) @13212   13 years tbretz Updated state names.
(edit) @13211   13 years tbretz Improves state handling.
(edit) @13210   13 years tbretz Removed all the unnecessary log-messages.
(edit) @13209   13 years tbretz Implemented fVerbose to switch verbosity of default messages on and off.
(edit) @13208   13 years tbretz Write comments as such.
(edit) @13207   13 years tbretz Addeda new log-class: comments
(edit) @13206   13 years tbretz Pipe comments to the log-file; added the missing jump label.
(edit) @13205   13 years lyard added fence from prevent column desc of messages services
(edit) @13204   13 years lyard added output to see which service creates column warning
(edit) @13203   13 years tbretz Updated the options.
(edit) @13202   13 years tbretz Updated the help text.
(edit) @13201   13 years tbretz Made DebugTx optional.
(edit) @13200   13 years tbretz Use Debug() when fDebugTx is enabled.
(edit) @13199   13 years tbretz Replaced wind direction by human readable strings.
(edit) @13198   13 years tbretz Replace degree value for wind direction with human readable value
(edit) @13197   13 years tbretz Shortened some dim descriptions.
(edit) @13196   13 years tbretz Shortened some dim descriptions.
(edit) @13195   13 years tbretz Shortened descriptions to make the datalogger more happy.
(edit) @13194   13 years tbretz Updated some dim descriptions; suppress unecessary output by default.
(edit) @13193   13 years tbretz Print AddService info only when it is really a service.
(edit) @13192   13 years tbretz Some improvement to header evaluation.
(edit) @13191   13 years tbretz Changed the default interval from 55s to 25s. Made it an option.
(edit) @13190   13 years tbretz Propagate max number of events and time correctly as signed int.
(edit) @13189   13 years tbretz Delay setting new volatges during current requests.
(edit) @13188   13 years Jens Buss changed the output
(edit) @13187   13 years Jens Buss changed the output
(edit) @13186   13 years Jens Buss resume data taking after it had to be aborted during first run of four
(edit) @13185   13 years Jens Buss spell check
(edit) @13184   13 years Jens Buss Script for Crab data taking, that automatically takes both wobble ...
(edit) @13183   13 years Jens Buss changed the time waited before sending commands to drivectrl
(edit) @13182   13 years neise included calculation of some more hillas parameters, still no unit ...
(edit) @13181   13 years neise added member, which contains numpy arrays instead of Vector2 objects. ...
(edit) @13180   13 years neise test functions are using Plotter class, and SignalGenerator class in ...
(edit) @13179   13 years tbretz Updated help text for '.s'
(edit) @13178   13 years tbretz Send current requests in current control mode only when voltage is ...
(edit) @13177   13 years neise initial commit of a script using the pyafact/image_extractors ...
(edit) @13176   13 years neise changed pyfact_rename to pyfact and switched on the tabulator checking
(edit) @13175   13 years neise introduced calculation of number of islands, but I did not want to ...
(edit) @13174   13 years neise Plotter was not correctly plotting the grid, introduced the plotting ...
(edit) @13173   13 years Daniela Dorner added (script to build sequences)
(edit) @13172   13 years Daniela Dorner added (crontab file for fact_opr on isdc-viewer00)
(edit) @13171   13 years Daniela Dorner improved output, fixed bugs
(edit) @13170   13 years tbretz Added checks for the consistency of the event and trigger number.
(edit) @13169   13 years tbretz Improved some debug output, removed obsolete SetMode; commented out ...
(edit) @13168   13 years tbretz Implemented a function for word wraping
(edit) @13167   13 years tbretz Moved read to cc file; implemented first version of a database interface.
(edit) @13166   13 years tbretz Make sure that the connection is the last in the configuration; ...
(edit) @13165   13 years tbretz Added some improved output.
(edit) @13164   13 years tbretz Implemented new command to set all offsets individually (for current ...
(edit) @13163   13 years tbretz Replaces all 416 by kNumChannels; send the correct command to set the ...
(edit) @13162   13 years Jens Buss DimScript for data taking, that only takes the 4 5min data runs, can ...
(edit) @13161   13 years Jens Buss DimScript for data taking MRK421, that automatically takes both wobble ...
(edit) @13160   13 years tbretz Some clean up to the commands.
(edit) @13159   13 years tbretz Assume that an empty folder name means '.'
(edit) @13158   13 years Daniela Dorner added insert to nightly status tables, removed insert for status ...
(edit) @13157   13 years ogrimm FSC resistances converted into temperature for online display
(edit) @13156   13 years neise new interface of next(), and hence a new option in the __init__() ...
(edit) @13155   13 years neise debugged DRs amplitude calibration. tom must not be rolled
(edit) @13154   13 years Daniela Dorner added (script to check status of transfer for deleting data)
(edit) @13153   13 years Daniela Dorner treat case that file is not yet there
(edit) @13152   13 years Daniela Dorner bugfix for drsfiles
(edit) @13151   13 years lusterma added doc; this is just an example, nothing ready, to be adapted to ...
(edit) @13150   13 years neise enabled tab checking and excahnged python_rename with python
(edit) @13149   13 years neise enabled tab checking and excahnged python_rename with python
(edit) @13148   13 years neise enabled tab checking and excahnged python_rename with python
(edit) @13147   13 years neise enabled tab checking and excahnged python_rename with python
(edit) @13146   13 years neise enabled tab checking and excahnged python_rename with python
(edit) @13145   13 years neise exchanged pyfact_rename by pyfact and enabled tab checking. removed ...
(edit) @13144   13 years neise enables tab checking and exchanged pyfact_rename by pyfact
(edit) @13143   13 years neise included python -tt option. thus checking for tabs/spaces
(edit) @13142   13 years neise included tab checking, and substituded all tabs by spaces
(edit) @13141   13 years neise moved newer pyfact_rename.py to pyfact.py ... keeping its history hopefully
(edit) @13140   13 years neise deletet depricated pyfact.py
(edit) @13139   13 years neise debugged two lines
(edit) @13138   13 years tbretz Implemented request of current sttaus during current feedback once in ...
(edit) @13137   13 years tbretz Ensure that the calibration starts now that the biasctrl doesn't sent ...
(edit) @13136   13 years tbretz Made sure that the first automatic status request at connection also ...
(edit) @13135   13 years tbretz Updated to v19r30
(edit) @13134   13 years tbretz Added a warning message to help debugging.
(edit) @13133   13 years neise added new member Coordinator.chid2vec, which is the same as chid2coor, ...
(edit) @13132   13 years neise moved tests out of __main__ into dedicated _test_funcs(), so making ...
(edit) @13131   13 years neise NOTE: included use of ImageExtractor classes, not yet testet
(edit) @13130   13 years neise initial commit of Image Parameter Extractor classes ... only the upper ...
(edit) @13129   13 years neise moved _test_SimplePlotter() down in the file
(edit) @13128   13 years neise just a text, to be refined during and after the course
(edit) @13127   13 years Jens Buss added a sanity check for fadctrl being in state connected before ...
(edit) @13126   13 years Jens Buss added a sanity check for fadctrl being in state connected before ...
(edit) @13125   13 years Jens Buss with this one can do the Amplitude Calibration for ROI 300
(edit) @13124   13 years lusterma pyfact made identical to pyfact_rename.py
(edit) @13123   13 years lusterma call back of pyfact drs calibration
(edit) @13122   13 years lusterma tiny modifications - still not final
(edit) @13121   13 years lusterma bug fix in drs calibration
(edit) @13120   13 years neise tidied up a bit. moved examples to examples and deleted scripts, I ...
(edit) @13119   13 years neise debugged return value of AmplitudeCleaner in case of ...
(edit) @13118   13 years neise included Plotter-class from depricated plotter.py-module with name ...
(edit) @13117   13 years tbretz gDirectory->GetListOfKeys() can be NULL... fixed.
(edit) @13116   13 years tbretz Do only request the status if the voltage is on; get some dummy ...
Note: See TracRevisionLog for help on using the revision log.