source:

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @12326   13 years tbretz Removed comments; replaced code in Apply by ApplyCh; fixed the problem ...
(edit) @12325   13 years tbretz Show VoltageOff as a red bar in the status LED
(edit) @12324   13 years tbretz Fixed some litle stuff in the new ratescan tab.
(edit) @12323   13 years tbretz Added the possibility to change the step size and maximum during a ...
(edit) @12322   13 years tbretz Allow eversything in fact++.rc
(edit) @12321   13 years Daniela Dorner adapted paths for raw and aux data
(edit) @12320   13 years tbretz Do not set negative axis ranges in handleRateScan.
(edit) @12319   13 years tbretz Switch control off when voltage off.
(edit) @12318   13 years Daniela Dorner updated ldaphost
(edit) @12317   13 years Daniela Dorner bugfix for updating string
(edit) @12316   13 years tbretz Removed invalid characters from Dim descriptions
(edit) @12315   13 years tbretz Make sure that the default option gets touched even it is finally not ...
(edit) @12314   13 years tbretz Stop startinga run if datalogger went into error state.
(edit) @12313   13 years tbretz Added an option to disable whole patches. fixed scaling factor in ...
(edit) @12312   13 years tbretz Fixed a workaround.
(edit) @12311   13 years tbretz Fixed writing of the data.
(edit) @12310   13 years lyard fixed a blur display bug
(edit) @12309   13 years tbretz First woring and tested version.
(edit) @12308   13 years tbretz Added specilized template to make sure we do not have to convert ...
(edit) @12307   13 years neise added '#define HAVE_ZLIB'
(edit) @12306   13 years neise added removeMaximaAbove method
(edit) @12305   13 years neise adjusted use of zerosearch() method ... this method doesn't return ...
(edit) @12304   13 years neise added symmetric sliding average filter
(edit) @12303   13 years kraehenb Save spectra of gainanalysis to the file gainspectra.root.
(edit) @12302   13 years lyard added clean destruction of qwt objects
(edit) @12301   13 years lyard moved double click to single click
(edit) @12300   13 years lyard added RMS tab and fixed time for old format
(edit) @12299   13 years kraehenb Include #define HAVE_ZLIB for compressed data files.
(edit) @12298   13 years lusterma added fbsl.C ...extract baseline data
(edit) @12297   13 years lyard added RMS tab
(edit) @12296   13 years Daniela Dorner added cron to rsync auxiliary and rawdata
(edit) @12295   13 years tbretz Addec code for the rate scan tab display
(edit) @12294   13 years tbretz Added sending of Dim services.
(edit) @12293   13 years tbretz Added controls for rate scan tab.
(edit) @12292   13 years tbretz Added tab for RateScans
(edit) @12291   13 years tbretz Use new features of trigger rate service.
(edit) @12290   13 years tbretz Included EnablePatch and a default constructor for the trigger rates.
(edit) @12289   13 years tbretz Store trigger rates for later display
(edit) @12288   13 years tbretz Addec ontrols for N/4
(edit) @12287   13 years tbretz Adapted format string for TRIGGER_RATES
(edit) @12286   13 years tbretz Fixed a misspelled class name.
(edit) @12285   13 years tbretz Removed stray debug output.
(edit) @12284   13 years tbretz Added elapsed time and on time to DrimTriggerRate
(edit) @12283   13 years tbretz Display N/4 logic threshold
(edit) @12282   13 years tbretz Added some N/4 controls
(edit) @12281   13 years tbretz Added the most simple spike removal to the display -- sould be ...
(edit) @12280   13 years tbretz Added the most simple spike removal before the statistics for the ...
(edit) @12279   13 years tbretz Added some more output in case the previous answer was not yet ...
(edit) @12278   13 years tbretz Added a very simple spike removal algorithm.
(edit) @12277   13 years lyard fixed the handling of columns names in the datalogger
(edit) @12276   13 years kraehenb Moved declaration of parread_tmp to the other declarations of read ...
(edit) @12275   13 years kraehenb Added more comments. Questions please to tpk@phys.ethz.ch.
(edit) @12274   13 years tbretz Allow that UnixTimeUTC is missing.
(edit) @12273   13 years tbretz Implemented feedback controls
(edit) @12272   13 years tbretz Exchanged some values whcih were obviously exhanged
(edit) @12271   13 years tbretz Added the possibility to apply a global offset to the temperature ...
(edit) @12270   13 years tbretz Added the possibility to switch off the update interval.
(edit) @12269   13 years tbretz Fixed wiritng the fits header.
(edit) @12268   13 years tbretz Fixed the output in the txt-file.
(edit) @12267   13 years tbretz Replaced the int16_t for dac by a uint16_t
(edit) @12266   13 years tbretz Disabled some broken sensor widgets by default
(edit) @12265   13 years neise removed needless include statement
(edit) @12264   13 years neise whitespaces
(edit) @12263   13 years neise a better example than fpeak_discri.C ... at least I hope so
(edit) @12262   13 years neise makes use of the new discriminators
(edit) @12261   13 years neise whitespaces only
(edit) @12260   13 years neise I case you want to see real raw data
(edit) @12259   13 years neise discriminator does now return vector<Region>
(edit) @12258   13 years neise zerosearch does now return vector<Region>
(edit) @12257   13 years neise vector<Region> are returned by most of my discriminators
(edit) @12256   13 years neise added zipped fits file support
(edit) @12255   13 years neise i know its wrong ... but i can't work without these files...
(edit) @12254   13 years tbretz Added the possibility to change the update interval online.
(edit) @12253   13 years tbretz Added tab for drive controls.
(edit) @12252   13 years tbretz Added commands to set LED brightness.
(edit) @12251   13 years tbretz Added descriptions for the dim services.
(edit) @12250   13 years tbretz Added some dim descriptions.
(edit) @12249   13 years tbretz Added some Dim descriptions and a new service propagating the nominal ...
(edit) @12248   13 years tbretz Added some state descriptions.
(edit) @12247   13 years tbretz Added state descriptions; replaced WAIT_FOR_RUN_NUMBER by ...
(edit) @12246   13 years tbretz Reverting to last revision.
(edit) @12245   13 years tbretz Reverting to last revision.
(edit) @12244   13 years tbretz Reverting to last revision.
(edit) @12243   13 years tbretz Added output of commands and states to --help
(edit) @12242   13 years tbretz Fixed a typo.
(edit) @12241   13 years tbretz Added possibility to scan in the N-out-of-4 logic.
(edit) @12240   13 years tbretz Some imporved output.
(edit) @12239   13 years tbretz Added configuration options and more help output.
(edit) @12238   13 years tbretz Give scan range with the START command.
(edit) @12237   13 years tbretz Allow to set one patch or pixel as reference for the rate-scan.
(edit) @12236   13 years tbretz Changed signed char to unsigned in output queue.
(edit) @12235   13 years tbretz Some lttle cosmetics; added some help stuff.
(edit) @12234   13 years tbretz Allow STOP in all states.
(edit) @12233   13 years tbretz Switch off debugging by default.
(edit) @12232   13 years tbretz Added some more DEBUG stuff.
(edit) @12231   13 years tbretz Fixed the new DEBUG stuff.
(edit) @12230   13 years tbretz Added some debug options.
(edit) @12229   13 years tbretz Added some debug out code.
(edit) @12228   13 years tbretz Fixed start/stop buttons for datalogger.
(edit) @12227   13 years tbretz Latest updates and bug fixes.
Note: See TracRevisionLog for help on using the revision log.