source: trunk/FACT++/gui/design.ui

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @12022   13 years tbretz Updated Feedback tab.
(edit) @12004   13 years tbretz Changed named of temp widgets for better understanding.
(edit) @11996   13 years tbretz Added feedback tab.
(edit) @11986   13 years tbretz Added a widget to display the average front plate temperature.
(edit) @11981   13 years tbretz Changed bias tab; added possibility to set a single channel to its ...
(edit) @11970   13 years tbretz Added some spacers in the Aux tab to keep the camera display in shape.
(edit) @11956   13 years tbretz Allow negative offsets; some updated to button texts; both in the bias tap
(edit) @11951   13 years tbretz Little updates to bias tab
(edit) @11949   13 years tbretz Added some controls in the bias tab to increase/decrease the voltage ...
(edit) @11934   13 years tbretz Adapted maxima in Bias tab
(edit) @11924   13 years tbretz Updated Bias tab mainly with a second display for the voltages.
(edit) @11882   13 years tbretz Added pixel to switch ADC display to the physical pipeline.
(edit) @11859   13 years tbretz Implemented SetRef and Set0 button for Bias.
(edit) @11856   13 years tbretz Added LED for Bias ctrl and for over current.
(edit) @11855   13 years tbretz Finalized the BIAS display.
(edit) @11854   13 years tbretz Added the Bias control to the GUI; consequently, updated the rate ...
(edit) @11850   13 years tbretz Added the possibility to switch off the drs calibration display - does ...
(edit) @11847   13 years tbretz Implemented display of FSC values.
(edit) @11836   13 years tbretz Added the Aux tab with the widgets for FSC data display.
(edit) @11827   13 years tbretz Some fine tuning.
(edit) @11824   13 years tbretz Display some statistics in the FAD tab with th ehelp of ...
(edit) @11820   13 years tbretz Display run-numbers of currently applied DRS calibration.
(edit) @11805   13 years tbretz Fixed a wrong spelling.
(edit) @11802   13 years tbretz Added persistant raw data display mode.
(edit) @11797   13 years tbretz Changed the name of the tab 'Page'; fixed warning in promotion of the ...
(edit) @11782   13 years lyard replaced the 4 roots cameras by 4 GL ones
(edit) @11779   13 years lyard Replaced root camera by openGL camera in the gui
(edit) @11776   13 years tbretz Reformating of the clock conditioner values.
(edit) @11759   13 years tbretz Added new DATA_EVENT display.
(edit) @11706   13 years tbretz Removed the stray Fad from the light-pulser widgets.
(edit) @11694   13 years tbretz Renamed FTM buttons.
(edit) @11682   13 years tbretz Added radio buttons for different scaling methods in ADC tab.
(edit) @11672   13 years tbretz Changed CBC on ADT tab to CBCC
(edit) @11659   13 years tbretz Added clock conditioner LED for locked status.
(edit) @11645   13 years tbretz Fixed a typo.
(edit) @11643   13 years tbretz Implemented setting min/max for color scale in rate tab
(edit) @11641   13 years tbretz Enabled the possibility to choose a pixel and a patch even taking data.
(edit) @11640   13 years tbretz Added group box around FTU rate controls.
(edit) @11639   13 years tbretz Changed number of allowed channels from 9 to 36
(edit) @11637   13 years tbretz Artificially increased the size of the refclock widet of the FAD tab ...
(edit) @11635   13 years tbretz Added services and gui elements for FAD DAC values.
(edit) @11632   13 years tbretz Renamed continous busy to constant busy.
(edit) @11623   13 years tbretz Added new BusyOn signal to FAD; some layout improvements
(edit) @11610   13 years tbretz Made switching on and off of widgets more userfriendly in the FTU tab
(edit) @11607   13 years tbretz Enable sending at least the roi checked by the event builder by DIM; ...
(edit) @11606   13 years tbretz Added SET_TRIGGER_RATE command to GUUI.
(edit) @11590   13 years tbretz Added MCP 'Reset' button.
(edit) @11548   13 years tbretz New widget should show evt/s rather than evts
(edit) @11545   13 years tbretz Added new maxEvt support.
(edit) @11536   13 years tbretz Fixed a typo; added some stuff for the light pulser setup
(edit) @11507   13 years tbretz Fixed a name.
(edit) @11497   13 years tbretz Added preliminary widgets for starting runs from the GUI.
(edit) @11419   13 years tbretz Added prescaler stuff.
(edit) @11365   13 years tbretz Align right for fTriggerInterval
(edit) @11342   13 years tbretz Divided Reset into soft and hard reset.
(edit) @11331   13 years tbretz Added FAD reset button
(edit) @11321   13 years tbretz Updated some ranges.
(edit) @11311   13 years tbretz Enabled datalogger Stop button.
(edit) @11298   13 years tbretz Updated FAD statistics
(edit) @11277   13 years tbretz Added button to start data logger.
(edit) @11276   13 years tbretz Set default for FAD buffer progress bar to 0.
(edit) @11235   13 years tbretz Little layout changes
(edit) @11234   13 years tbretz Small layout updates
(edit) @11233   13 years tbretz Layouted FAD tab
(edit) @11228   13 years tbretz Layout update FAD tab
(edit) @11227   13 years tbretz Changed startup tab
(edit) @11226   13 years tbretz broadcast whole events via Dim; made MainWindow and abstract base ...
(edit) @11225   13 years tbretz Implemented REFRENECE_CLOCK
(edit) @11222   13 years neise Added StartRun/StopRun
(edit) @11214   13 years tbretz Little change.
(edit) @11213   13 years tbretz Renamed the fad temperature led.
(edit) @11207   13 years tbretz Many little and more changed to teh FAD and event builder controls; ...
(edit) @11200   13 years tbretz Restructured the FAD gui; made widgets for run-number and ROI active.
(edit) @11179   13 years tbretz Added FAD DNA.
(edit) @11176   13 years tbretz Added output of frequency calculated from the clock conditioner values.
(edit) @11174   13 years tbretz New scheme to transmit the status bits.
(edit) @11172   13 years tbretz Updated maximum number for event id.
(edit) @11170   13 years tbretz Changed CONTINOUS_TRIGGER_ON/OFF to ENABLE_CONTINOUS_TRIGGER; added ...
(edit) @11169   13 years tbretz Added DrsEnabled
(edit) @11167   13 years tbretz Renamed led for pll lock; removed ref clock overflow.
(edit) @11158   13 years tbretz Updated in the FAD tab.
(edit) @11143   13 years tbretz Added reset trigger id button.
(edit) @11141   13 years tbretz Moved PLL_Lock, remove obsolete buttons.
(edit) @11137   13 years tbretz Changed maximum of some widgets.
(edit) @11132   13 years tbretz Added more FAD elements.
(edit) @11124   13 years tbretz Added Dock widget to ADC tab and LED for Event Builder.
(edit) @11119   13 years tbretz Added socket option for FAD
(edit) @11114   13 years tbretz Fixed some FAD controls, added FSC to list of states.
(edit) @11113   13 years tbretz Removed Connect Disconnect
(edit) @11111   13 years tbretz Added more FAD control buttons; implemented button events
(edit) @11103   13 years tbretz Fixed range of clock conditioner spin boxes.
(edit) @11102   13 years tbretz Added possibility to set the clock conditioner's frequency for some ...
(edit) @11065   13 years tbretz Added the ADC tab and change some names to mor emeaningful ones.
(edit) @10959   13 years tbretz Implemented Enable/Disable all button; added the correct hw/sw-pixel ...
(edit) @10953   13 years tbretz Added the possibility to disable all patches/pixels except one.
(edit) @10948   13 years tbretz Implemented Crate/Board/Patch in addition to pixel index.
(edit) @10935   13 years tbretz Set some names.
(edit) @10920   13 years tbretz Started with the implementation of the FAD controls.
(edit) @10917   13 years tbretz Renamed fPing to fFtuPing; added fFtuAllOn and fFtuAllOff buttons
(edit) @10916   13 years tbretz Added some primitive FAD controls and one connection LED per Board
Note: See TracRevisionLog for help on using the revision log.