source: trunk/FACT++/gui/design.ui

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @17882   11 years tbretz Disabled the second broken Humidity sensor.
(edit) @17257   11 years tbretz Added button for ZFits
(edit) @17019   11 years tbretz Adapted to the changes in biasctrl and feedback (get calibrated ...
(edit) @16620   11 years tbretz Removed some obsolete stuff.
(edit) @16526   12 years tbretz Adapted FAD section to updates in GUI_STATS
(edit) @14671   12 years tbretz Do not display broken humidity sensor
(edit) @14492   12 years tbretz Added some (future) controls to switch off the event display; ...
(edit) @13237   13 years tbretz Updated to fit the new biasctrl command and services.
(edit) @12966   13 years tbretz Added wind gusts to GUI.
(edit) @12657   13 years tbretz Made the fad tab a little bit less height.
(edit) @12655   13 years tbretz Moved the remaining stuff from the event builder to the logger tab
(edit) @12653   13 years tbretz Little fixed to the new weather data.
(edit) @12652   13 years tbretz Get the magic weather station data properly into the GUI.
(edit) @12528   13 years tbretz Removed some obsolete fad commands; fixed some signal/slot names; some ...
(edit) @12523   13 years tbretz Added widgets for the control of the file format.
(edit) @12498   13 years tbretz Implemented commands and buttons to start a drs calibration and to ...
(edit) @12496   13 years tbretz Changed some rate scan widget names.
(edit) @12472   13 years tbretz Updated the DRS calibration and added the display of the ROI
(edit) @12455   13 years tbretz Reordered some stuff; added the ROI to the DRS calibration informations.
(edit) @12439   13 years tbretz Changed the default rate scaling from 0 to 10 in the Rates tab
(edit) @12427   13 years tbretz Added rate control.
(edit) @12414   13 years tbretz Some simplifications; Added the Calibration button in the Feedback ...
(edit) @12406   13 years tbretz Added the bias supply calibration coming from the feedback to the gui
(edit) @12375   13 years tbretz Removed the obsolete fFadLedRoi and enabled the widet which allows ...
(edit) @12358   13 years tbretz Simplified fad tab; added drive led
(edit) @12340   13 years tbretz Unified FAD and EvtBuilder tab as much as possible.
(edit) @12324   13 years tbretz Fixed some litle stuff in the new ratescan tab.
(edit) @12292   13 years tbretz Added tab for RateScans
(edit) @12288   13 years tbretz Addec ontrols for N/4
(edit) @12273   13 years tbretz Implemented feedback controls
(edit) @12266   13 years tbretz Disabled some broken sensor widgets by default
(edit) @12253   13 years tbretz Added tab for drive controls.
(edit) @12178   13 years tbretz Added buttons to enable disable all pixels of a singel patch.
(edit) @12135   13 years tbretz Some little changed to layout hints in the Bias tab
(edit) @12123   13 years tbretz Some convenience updates.
(edit) @12077   13 years tbretz Changed some widgets to 'Preferred'
(edit) @12076   13 years tbretz Added feedback Led and label
(edit) @12062   13 years tbretz Added two root canvases to the feedback tab.
(edit) @12022   13 years tbretz Updated Feedback tab.
(edit) @12004   13 years tbretz Changed named of temp widgets for better understanding.
(edit) @11996   13 years tbretz Added feedback tab.
(edit) @11986   13 years tbretz Added a widget to display the average front plate temperature.
(edit) @11981   13 years tbretz Changed bias tab; added possibility to set a single channel to its ...
(edit) @11970   13 years tbretz Added some spacers in the Aux tab to keep the camera display in shape.
(edit) @11956   13 years tbretz Allow negative offsets; some updated to button texts; both in the bias tap
(edit) @11951   13 years tbretz Little updates to bias tab
(edit) @11949   13 years tbretz Added some controls in the bias tab to increase/decrease the voltage ...
(edit) @11934   13 years tbretz Adapted maxima in Bias tab
(edit) @11924   13 years tbretz Updated Bias tab mainly with a second display for the voltages.
(edit) @11882   13 years tbretz Added pixel to switch ADC display to the physical pipeline.
(edit) @11859   13 years tbretz Implemented SetRef and Set0 button for Bias.
(edit) @11856   13 years tbretz Added LED for Bias ctrl and for over current.
(edit) @11855   13 years tbretz Finalized the BIAS display.
(edit) @11854   13 years tbretz Added the Bias control to the GUI; consequently, updated the rate ...
(edit) @11850   13 years tbretz Added the possibility to switch off the drs calibration display - does ...
(edit) @11847   13 years tbretz Implemented display of FSC values.
(edit) @11836   13 years tbretz Added the Aux tab with the widgets for FSC data display.
(edit) @11827   13 years tbretz Some fine tuning.
(edit) @11824   13 years tbretz Display some statistics in the FAD tab with th ehelp of ...
(edit) @11820   13 years tbretz Display run-numbers of currently applied DRS calibration.
(edit) @11805   13 years tbretz Fixed a wrong spelling.
(edit) @11802   13 years tbretz Added persistant raw data display mode.
(edit) @11797   13 years tbretz Changed the name of the tab 'Page'; fixed warning in promotion of the ...
(edit) @11782   13 years lyard replaced the 4 roots cameras by 4 GL ones
(edit) @11779   13 years lyard Replaced root camera by openGL camera in the gui
(edit) @11776   13 years tbretz Reformating of the clock conditioner values.
(edit) @11759   13 years tbretz Added new DATA_EVENT display.
(edit) @11706   13 years tbretz Removed the stray Fad from the light-pulser widgets.
(edit) @11694   13 years tbretz Renamed FTM buttons.
(edit) @11682   13 years tbretz Added radio buttons for different scaling methods in ADC tab.
(edit) @11672   13 years tbretz Changed CBC on ADT tab to CBCC
(edit) @11659   13 years tbretz Added clock conditioner LED for locked status.
(edit) @11645   13 years tbretz Fixed a typo.
(edit) @11643   13 years tbretz Implemented setting min/max for color scale in rate tab
(edit) @11641   13 years tbretz Enabled the possibility to choose a pixel and a patch even taking data.
(edit) @11640   13 years tbretz Added group box around FTU rate controls.
(edit) @11639   13 years tbretz Changed number of allowed channels from 9 to 36
(edit) @11637   13 years tbretz Artificially increased the size of the refclock widet of the FAD tab ...
(edit) @11635   13 years tbretz Added services and gui elements for FAD DAC values.
(edit) @11632   13 years tbretz Renamed continous busy to constant busy.
(edit) @11623   13 years tbretz Added new BusyOn signal to FAD; some layout improvements
(edit) @11610   13 years tbretz Made switching on and off of widgets more userfriendly in the FTU tab
(edit) @11607   13 years tbretz Enable sending at least the roi checked by the event builder by DIM; ...
(edit) @11606   13 years tbretz Added SET_TRIGGER_RATE command to GUUI.
(edit) @11590   13 years tbretz Added MCP 'Reset' button.
(edit) @11548   13 years tbretz New widget should show evt/s rather than evts
(edit) @11545   13 years tbretz Added new maxEvt support.
(edit) @11536   13 years tbretz Fixed a typo; added some stuff for the light pulser setup
(edit) @11507   13 years tbretz Fixed a name.
(edit) @11497   13 years tbretz Added preliminary widgets for starting runs from the GUI.
(edit) @11419   13 years tbretz Added prescaler stuff.
(edit) @11365   13 years tbretz Align right for fTriggerInterval
(edit) @11342   13 years tbretz Divided Reset into soft and hard reset.
(edit) @11331   13 years tbretz Added FAD reset button
(edit) @11321   13 years tbretz Updated some ranges.
(edit) @11311   13 years tbretz Enabled datalogger Stop button.
(edit) @11298   13 years tbretz Updated FAD statistics
(edit) @11277   13 years tbretz Added button to start data logger.
(edit) @11276   13 years tbretz Set default for FAD buffer progress bar to 0.
(edit) @11235   13 years tbretz Little layout changes
Note: See TracRevisionLog for help on using the revision log.