source: trunk/FACT++/src

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @12360   13 years tbretz Do not check if waiting for answer in ExpertReste if this is a OC reset
(edit) @12355   13 years tbretz
(edit) @12353   13 years tbretz Removed an obsolete comment block
(edit) @12352   13 years tbretz Adapted output of filenames.
(edit) @12351   13 years tbretz Set some fixed control loop parameters as determined in Zurich; output ...
(edit) @12350   13 years tbretz Do directly set the new reference in SetReference.
(edit) @12349   13 years tbretz Removed the warning in case of double delete... so far no problems ...
(edit) @12348   13 years tbretz Use the connection to the DNS as the IP address to get the Local IP.
(edit) @12347   13 years tbretz Make the FEEDBACK receive the data all the time for a combined control ...
(edit) @12346   13 years tbretz Do not use statvfs in SetCurrentFolder.
(edit) @12345   13 years tbretz Display N/40 in decimal
(edit) @12343   13 years tbretz Moved some common code between MARS and FACT++ to DrsCalib.h as new ...
(edit) @12342   13 years tbretz Improved output; removed obsolste ?: operators.
(edit) @12338   13 years tbretz Renamed option ramp-time to ramp-delay
(edit) @12337   13 years tbretz Removed stray debug output.
(edit) @12336   13 years tbretz For the time being go back to idle when a new run was successfully started.
(edit) @12335   13 years tbretz Improved class reference.
(edit) @12334   13 years tbretz Renamed kTakingData to kTriggerOn
(edit) @12333   13 years tbretz Added GetNumFilesOpen and IncreaseRunNumber.
(edit) @12332   13 years tbretz Replaced kTakingData by kTriggerOn
(edit) @12331   13 years tbretz Added the state kWritingData and avoid that run-numbers can be ...
(edit) @12330   13 years tbretz Added state kWritingData.
(edit) @12323   13 years tbretz Added the possibility to change the step size and maximum during a ...
(edit) @12322   13 years tbretz Allow eversything in fact++.rc
(edit) @12319   13 years tbretz Switch control off when voltage off.
(edit) @12316   13 years tbretz Removed invalid characters from Dim descriptions
(edit) @12315   13 years tbretz Make sure that the default option gets touched even it is finally not ...
(edit) @12314   13 years tbretz Stop startinga run if datalogger went into error state.
(edit) @12313   13 years tbretz Added an option to disable whole patches. fixed scaling factor in ...
(edit) @12312   13 years tbretz Fixed a workaround.
(edit) @12311   13 years tbretz Fixed writing of the data.
(edit) @12309   13 years tbretz First woring and tested version.
(edit) @12308   13 years tbretz Added specilized template to make sure we do not have to convert ...
(edit) @12294   13 years tbretz Added sending of Dim services.
(edit) @12291   13 years tbretz Use new features of trigger rate service.
(edit) @12290   13 years tbretz Included EnablePatch and a default constructor for the trigger rates.
(edit) @12287   13 years tbretz Adapted format string for TRIGGER_RATES
(edit) @12286   13 years tbretz Fixed a misspelled class name.
(edit) @12284   13 years tbretz Added elapsed time and on time to DrimTriggerRate
(edit) @12280   13 years tbretz Added the most simple spike removal before the statistics for the ...
(edit) @12279   13 years tbretz Added some more output in case the previous answer was not yet ...
(edit) @12277   13 years lyard fixed the handling of columns names in the datalogger
(edit) @12272   13 years tbretz Exchanged some values whcih were obviously exhanged
(edit) @12271   13 years tbretz Added the possibility to apply a global offset to the temperature ...
(edit) @12270   13 years tbretz Added the possibility to switch off the update interval.
(edit) @12269   13 years tbretz Fixed wiritng the fits header.
(edit) @12268   13 years tbretz Fixed the output in the txt-file.
(edit) @12267   13 years tbretz Replaced the int16_t for dac by a uint16_t
(edit) @12254   13 years tbretz Added the possibility to change the update interval online.
(edit) @12252   13 years tbretz Added commands to set LED brightness.
(edit) @12251   13 years tbretz Added descriptions for the dim services.
(edit) @12250   13 years tbretz Added some dim descriptions.
(edit) @12249   13 years tbretz Added some Dim descriptions and a new service propagating the nominal ...
(edit) @12248   13 years tbretz Added some state descriptions.
(edit) @12247   13 years tbretz Added state descriptions; replaced WAIT_FOR_RUN_NUMBER by ...
(edit) @12246   13 years tbretz Reverting to last revision.
(edit) @12245   13 years tbretz Reverting to last revision.
(edit) @12244   13 years tbretz Reverting to last revision.
(edit) @12243   13 years tbretz Added output of commands and states to --help
(edit) @12242   13 years tbretz Fixed a typo.
(edit) @12241   13 years tbretz Added possibility to scan in the N-out-of-4 logic.
(edit) @12240   13 years tbretz Some imporved output.
(edit) @12239   13 years tbretz Added configuration options and more help output.
(edit) @12238   13 years tbretz Give scan range with the START command.
(edit) @12237   13 years tbretz Allow to set one patch or pixel as reference for the rate-scan.
(edit) @12236   13 years tbretz Changed signed char to unsigned in output queue.
(edit) @12235   13 years tbretz Some lttle cosmetics; added some help stuff.
(edit) @12234   13 years tbretz Allow STOP in all states.
(edit) @12233   13 years tbretz Switch off debugging by default.
(edit) @12232   13 years tbretz Added some more DEBUG stuff.
(edit) @12231   13 years tbretz Fixed the new DEBUG stuff.
(edit) @12230   13 years tbretz Added some debug options.
(edit) @12229   13 years tbretz Added some debug out code.
(edit) @12227   13 years tbretz Latest updates and bug fixes.
(edit) @12226   13 years tbretz Latest updates and bug fixes.
(edit) @12223   13 years tbretz Fixed a scoping problem.
(edit) @12222   13 years tbretz Fixed status VoltageOff.
(edit) @12221   13 years tbretz Debuged temperature feedback.
(edit) @12219   13 years tbretz Send only calibration events to feedback system.
(edit) @12218   13 years tbretz Adapted the datalogger state checks
(edit) @12216   13 years tbretz Send a different status for FADs which are currently configured.
(edit) @12215   13 years tbretz Allow derived classes to access CloseImp from handlers.
(edit) @12214   13 years tbretz Improved error messages; replaces PostClose by CloseImp in handlers.
(edit) @12213   13 years tbretz Improved error messages; switched to hardware flow control -- does ...
(edit) @12211   13 years tbretz Added some more debug output.
(edit) @12210   13 years tbretz Debuged to make it work.
(edit) @12203   13 years tbretz Removed some obsolete output in PrintUsage
(edit) @12201   13 years tbretz First version of a tool performing a rate scan.
(edit) @12187   13 years tbretz Replaced dic_cmnd_service by DimClient::sendCommandNB.
(edit) @12183   13 years tbretz Implemented the possibility to adapt the voltage according to the ...
(edit) @12177   13 years tbretz Added new commands ENABLE_PATCH and DISABLE_PATCH
(edit) @12167   13 years tbretz Updated graph; unified paths; updated compilation of file-names; ...
(edit) @12165   13 years tbretz
(edit) @12164   13 years tbretz Added bool-cast operator to PixelMapEntry.
(edit) @12163   13 years tbretz Choose better name for PCTime column
(edit) @12161   13 years tbretz Undo last revision.
(edit) @12160   13 years tbretz Added PixelMap.cc to fact_SOURCES
(edit) @12151   13 years lyard removed pixelMap static def
(edit) @12150   13 years lyard bug fix - fitsdump
(edit) @12149   13 years lyard bug fix - fitsdump
Note: See TracRevisionLog for help on using the revision log.