|
|
@12372
|
13 years |
lyard |
implemented chunk allocation of memory. Not optimal yet, but at least ...
|
|
|
@12360
|
13 years |
tbretz |
Do not check if waiting for answer in ExpertReste if this is a OC reset
|
|
|
@12355
|
13 years |
tbretz |
|
|
|
@12353
|
13 years |
tbretz |
Removed an obsolete comment block
|
|
|
@12352
|
13 years |
tbretz |
Adapted output of filenames.
|
|
|
@12351
|
13 years |
tbretz |
Set some fixed control loop parameters as determined in Zurich; output ...
|
|
|
@12350
|
13 years |
tbretz |
Do directly set the new reference in SetReference.
|
|
|
@12349
|
13 years |
tbretz |
Removed the warning in case of double delete... so far no problems ...
|
|
|
@12348
|
13 years |
tbretz |
Use the connection to the DNS as the IP address to get the Local IP.
|
|
|
@12347
|
13 years |
tbretz |
Make the FEEDBACK receive the data all the time for a combined control ...
|
|
|
@12346
|
13 years |
tbretz |
Do not use statvfs in SetCurrentFolder.
|
|
|
@12345
|
13 years |
tbretz |
Display N/40 in decimal
|
|
|
@12343
|
13 years |
tbretz |
Moved some common code between MARS and FACT++ to DrsCalib.h as new ...
|
|
|
@12342
|
13 years |
tbretz |
Improved output; removed obsolste ?: operators.
|
|
|
@12338
|
13 years |
tbretz |
Renamed option ramp-time to ramp-delay
|
|
|
@12337
|
13 years |
tbretz |
Removed stray debug output.
|
|
|
@12336
|
13 years |
tbretz |
For the time being go back to idle when a new run was successfully started.
|
|
|
@12335
|
13 years |
tbretz |
Improved class reference.
|
|
|
@12334
|
13 years |
tbretz |
Renamed kTakingData to kTriggerOn
|
|
|
@12333
|
13 years |
tbretz |
Added GetNumFilesOpen and IncreaseRunNumber.
|
|
|
@12332
|
13 years |
tbretz |
Replaced kTakingData by kTriggerOn
|
|
|
@12331
|
13 years |
tbretz |
Added the state kWritingData and avoid that run-numbers can be ...
|
|
|
@12330
|
13 years |
tbretz |
Added state kWritingData.
|
|
|
@12323
|
13 years |
tbretz |
Added the possibility to change the step size and maximum during a ...
|
|
|
@12322
|
13 years |
tbretz |
Allow eversything in fact++.rc
|
|
|
@12319
|
13 years |
tbretz |
Switch control off when voltage off.
|
|
|
@12316
|
13 years |
tbretz |
Removed invalid characters from Dim descriptions
|
|
|
@12315
|
13 years |
tbretz |
Make sure that the default option gets touched even it is finally not ...
|
|
|
@12314
|
13 years |
tbretz |
Stop startinga run if datalogger went into error state.
|
|
|
@12313
|
13 years |
tbretz |
Added an option to disable whole patches. fixed scaling factor in ...
|
|
|
@12312
|
13 years |
tbretz |
Fixed a workaround.
|
|
|
@12311
|
13 years |
tbretz |
Fixed writing of the data.
|
|
|
@12309
|
13 years |
tbretz |
First woring and tested version.
|
|
|
@12308
|
13 years |
tbretz |
Added specilized template to make sure we do not have to convert ...
|
|
|
@12294
|
13 years |
tbretz |
Added sending of Dim services.
|
|
|
@12291
|
13 years |
tbretz |
Use new features of trigger rate service.
|
|
|
@12290
|
13 years |
tbretz |
Included EnablePatch and a default constructor for the trigger rates.
|
|
|
@12287
|
13 years |
tbretz |
Adapted format string for TRIGGER_RATES
|
|
|
@12286
|
13 years |
tbretz |
Fixed a misspelled class name.
|
|
|
@12284
|
13 years |
tbretz |
Added elapsed time and on time to DrimTriggerRate
|
|
|
@12280
|
13 years |
tbretz |
Added the most simple spike removal before the statistics for the ...
|
|
|
@12279
|
13 years |
tbretz |
Added some more output in case the previous answer was not yet ...
|
|
|
@12277
|
13 years |
lyard |
fixed the handling of columns names in the datalogger
|
|
|
@12272
|
13 years |
tbretz |
Exchanged some values whcih were obviously exhanged
|
|
|
@12271
|
13 years |
tbretz |
Added the possibility to apply a global offset to the temperature ...
|
|
|
@12270
|
13 years |
tbretz |
Added the possibility to switch off the update interval.
|
|
|
@12269
|
13 years |
tbretz |
Fixed wiritng the fits header.
|
|
|
@12268
|
13 years |
tbretz |
Fixed the output in the txt-file.
|
|
|
@12267
|
13 years |
tbretz |
Replaced the int16_t for dac by a uint16_t
|
|
|
@12254
|
13 years |
tbretz |
Added the possibility to change the update interval online.
|
|
|
@12252
|
13 years |
tbretz |
Added commands to set LED brightness.
|
|
|
@12251
|
13 years |
tbretz |
Added descriptions for the dim services.
|
|
|
@12250
|
13 years |
tbretz |
Added some dim descriptions.
|
|
|
@12249
|
13 years |
tbretz |
Added some Dim descriptions and a new service propagating the nominal ...
|
|
|
@12248
|
13 years |
tbretz |
Added some state descriptions.
|
|
|
@12247
|
13 years |
tbretz |
Added state descriptions; replaced WAIT_FOR_RUN_NUMBER by ...
|
|
|
@12246
|
13 years |
tbretz |
Reverting to last revision.
|
|
|
@12245
|
13 years |
tbretz |
Reverting to last revision.
|
|
|
@12244
|
13 years |
tbretz |
Reverting to last revision.
|
|
|
@12243
|
13 years |
tbretz |
Added output of commands and states to --help
|
|
|
@12242
|
13 years |
tbretz |
Fixed a typo.
|
|
|
@12241
|
13 years |
tbretz |
Added possibility to scan in the N-out-of-4 logic.
|
|
|
@12240
|
13 years |
tbretz |
Some imporved output.
|
|
|
@12239
|
13 years |
tbretz |
Added configuration options and more help output.
|
|
|
@12238
|
13 years |
tbretz |
Give scan range with the START command.
|
|
|
@12237
|
13 years |
tbretz |
Allow to set one patch or pixel as reference for the rate-scan.
|
|
|
@12236
|
13 years |
tbretz |
Changed signed char to unsigned in output queue.
|
|
|
@12235
|
13 years |
tbretz |
Some lttle cosmetics; added some help stuff.
|
|
|
@12234
|
13 years |
tbretz |
Allow STOP in all states.
|
|
|
@12233
|
13 years |
tbretz |
Switch off debugging by default.
|
|
|
@12232
|
13 years |
tbretz |
Added some more DEBUG stuff.
|
|
|
@12231
|
13 years |
tbretz |
Fixed the new DEBUG stuff.
|
|
|
@12230
|
13 years |
tbretz |
Added some debug options.
|
|
|
@12229
|
13 years |
tbretz |
Added some debug out code.
|
|
|
@12227
|
13 years |
tbretz |
Latest updates and bug fixes.
|
|
|
@12226
|
13 years |
tbretz |
Latest updates and bug fixes.
|
|
|
@12223
|
13 years |
tbretz |
Fixed a scoping problem.
|
|
|
@12222
|
13 years |
tbretz |
Fixed status VoltageOff.
|
|
|
@12221
|
13 years |
tbretz |
Debuged temperature feedback.
|
|
|
@12219
|
13 years |
tbretz |
Send only calibration events to feedback system.
|
|
|
@12218
|
13 years |
tbretz |
Adapted the datalogger state checks
|
|
|
@12216
|
13 years |
tbretz |
Send a different status for FADs which are currently configured.
|
|
|
@12215
|
13 years |
tbretz |
Allow derived classes to access CloseImp from handlers.
|
|
|
@12214
|
13 years |
tbretz |
Improved error messages; replaces PostClose by CloseImp in handlers.
|
|
|
@12213
|
13 years |
tbretz |
Improved error messages; switched to hardware flow control -- does ...
|
|
|
@12211
|
13 years |
tbretz |
Added some more debug output.
|
|
|
@12210
|
13 years |
tbretz |
Debuged to make it work.
|
|
|
@12203
|
13 years |
tbretz |
Removed some obsolete output in PrintUsage
|
|
|
@12201
|
13 years |
tbretz |
First version of a tool performing a rate scan.
|
|
|
@12187
|
13 years |
tbretz |
Replaced dic_cmnd_service by DimClient::sendCommandNB.
|
|
|
@12183
|
13 years |
tbretz |
Implemented the possibility to adapt the voltage according to the ...
|
|
|
@12177
|
13 years |
tbretz |
Added new commands ENABLE_PATCH and DISABLE_PATCH
|
|
|
@12167
|
13 years |
tbretz |
Updated graph; unified paths; updated compilation of file-names; ...
|
|
|
@12165
|
13 years |
tbretz |
|
|
|
@12164
|
13 years |
tbretz |
Added bool-cast operator to PixelMapEntry.
|
|
|
@12163
|
13 years |
tbretz |
Choose better name for PCTime column
|
|
|
@12161
|
13 years |
tbretz |
Undo last revision.
|
|
|
@12160
|
13 years |
tbretz |
Added PixelMap.cc to fact_SOURCES
|
|
|
@12151
|
13 years |
lyard |
removed pixelMap static def
|
|
|
@12150
|
13 years |
lyard |
bug fix - fitsdump
|
|
|