source: trunk/FACT++

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @14354   12 years tbretz Initialize fEnabled.
(edit) @14353   12 years tbretz Adapted to the new states of the dimctrl.
(edit) @14352   12 years tbretz The subscription to the nominal bias voltage was missing. Make sure ...
(edit) @14351   12 years tbretz The state from the callback was not yet properly propagated. ...
(edit) @14350   12 years tbretz It is not necessary to check the rate control only for the timeout of ...
(edit) @14349   12 years tbretz The state description for the Locked state was missing.
(edit) @14348   12 years tbretz Do npt print a message when only a new command appears.
(edit) @14347   12 years Jens Buss add two triggers if starting FADs failed to request satus
(edit) @14346   12 years Jens Buss add a wait of 6 sec before starting FADs
(edit) @14345   12 years Jens Buss optimized output to 40 signs textwidth
(edit) @14344   12 years Jens Buss add output
(edit) @14343   12 years Jens Buss optimized output to 40 signs textwidth
(edit) @14342   12 years Jens Buss optimized output to 40 signs textwidth
(edit) @14341   12 years Jens Buss deleted useless output
(edit) @14340   12 years Jens Buss whitespace changes
(edit) @14339   12 years Jens Buss whitespace changes
(edit) @14338   12 years Jens Buss optimized output to 40 signs textwidth
(edit) @14337   12 years Jens Buss optimized output to 40 sign textwidth
(edit) @14336   12 years Jens Buss optimized output to 40 sign textwidth
(edit) @14335   12 years Jens Buss added seperators
(edit) @14334   12 years Jens Buss optimized output width
(edit) @14333   12 years Jens Buss optimized output width
(edit) @14332   12 years Jens Buss typo
(edit) @14331   12 years Jens Buss changed wait states to new state ID of FACT++.upgrade
(edit) @14330   12 years Jens Buss modified: for software startup
(edit) @14329   12 years tbretz Last fix did not compile -- fixed.
(edit) @14328   12 years tbretz Updated to the latest version auf autoconf/automake
(edit) @14327   12 years tbretz A small bugfix that the bin-width for the visibility plots cannot get ...
(edit) @14326   12 years neise added if IsConnected
(edit) @14325   12 years neise debugged a typo
(edit) @14324   12 years neise added AntiFloddingTimer
(edit) @14323   12 years tbretz Some security update to the escaping.
(edit) @14317   12 years neise added RequestStatus, after Output on/off; output on/off was only ...
(edit) @14316   12 years neise step by step ... going to test it
(edit) @14315   12 years neise slowly evolving
(edit) @14314   12 years neise still tidying up
(edit) @14313   12 years neise trying to clean up
(edit) @14312   12 years tbretz The month is given in the range 0..11 not 1..12
(edit) @14311   12 years Jens Buss add disable all FTUs and Stop_Trigger
(edit) @14310   12 years tbretz Fixed a problem with the visibility and current-predition if sources ...
(edit) @14309   12 years tbretz Calculate current curve only if source is visible above 75deg. Made ...
(edit) @14308   12 years tbretz Added the distance to the sun... the sun's zd needs to be checked... ...
(edit) @14307   12 years tbretz Added sun angle.
(edit) @14306   12 years tbretz Fixed a performance issue with the calculation of the moon position, ...
(edit) @14305   12 years tbretz Write binary file.
(edit) @14304   12 years tbretz Added missing include of glu-.h
(edit) @14303   12 years tbretz Removed double include at the first line and added missing include of glu.h
(edit) @14302   12 years tbretz Implemented light-condition.data and set an empty default for th ...
(edit) @14301   12 years Jens Buss initial commit: do a software shutdown
(edit) @14300   12 years Jens Buss add a ping of the FTUs
(edit) @14299   12 years neise just need to check in quickly
(edit) @14298   12 years Jens Buss initial commit: take a pedestal run with ROI 1024
(edit) @14297   12 years Jens Buss modified location of subscripts
(edit) @14296   12 years Jens Buss moved script to folder service scripts
(edit) @14295   12 years Jens Buss initial commit: reset crate after fad-loss or drs-underflow
(edit) @14294   12 years Jens Buss add waitstates to automaticaly wait the right time before reconnecting ...
(edit) @14293   12 years neise changed HeadersFSC to HeadersAgilent
(edit) @14292   12 years neise initial commit
(edit) @14291   12 years neise initial commint
(edit) @14290   12 years neise added scripts for 2344
(edit) @14287   12 years tbretz
(edit) @14286   12 years tbretz Updated to v19r37
(edit) @14285   12 years Jens Buss put the drive system status check in to the separate script
(edit) @14284   12 years Jens Buss put the drive system status check in to the separate script
(edit) @14283   12 years Jens Buss deleted drive check and put it to separate file
(edit) @14282   12 years Jens Buss Initial commit: check if drive is tracking
(edit) @14281   12 years Jens Buss add SwitchOnBias.dim
(edit) @14276   12 years Jens Buss initial commit: switch on feedback and bias
(edit) @14275   12 years neise LP_rate_test.dim .. for tonight
(edit) @14267   12 years Jens Buss additional out put for wait-states in scripts
(edit) @14266   12 years Jens Buss additional out put for wait-states in scripts
(edit) @14265   12 years Jens Buss additional out put for wait-states in scripts
(edit) @14264   12 years Jens Buss additional out put for wait-states in scripts
(edit) @14263   12 years Jens Buss additional out put for wait-states in scripts
(edit) @14262   12 years Jens Buss modified output
(edit) @14251   12 years lyard added Q3D Widget for compiling the viewer in Makefile.am
(edit) @14250   12 years lyard Added 3D view of camera pulse shapes
(edit) @14244   12 years tbretz Removed a stray line left over from last commit.
(edit) @14243   12 years tbretz Promote the state to idle if it is less than idle but all clients are ...
(edit) @14240   12 years tbretz Added DimState to datalogger
(edit) @14239   12 years tbretz Replaced DBUS_TIMEOUT_USE_DEFAULT by -1, otherwise we need additional ...
(edit) @14238   12 years tbretz Removed the obsolete data pointer argument from InitDataColumns
(edit) @14235   12 years lyard removed error message when service reappears while still in the ...
(edit) @14234   12 years tbretz Of course when a server gets added it should not be removed
(edit) @14233   12 years lyard replaced DimServiceInfoListImp with EventImps. Warning, currently the ...
(edit) @14232   12 years tbretz With the current dim version arguments are not passed as --arg but ...
(edit) @14228   12 years tbretz Chat messages are now sent as comment
(edit) @14227   12 years tbretz Exchanged Message with Comment to be able to distinguish chat messages ...
(edit) @14226   12 years tbretz For the moment adding logging also to 'msg'
(edit) @14225   12 years tbretz Changed the timout for incomplete events from 10s to 30s
(edit) @14224   12 years tbretz Allow ENABLE_FTU and RESET_CRATE in state configured to allow the ...
(edit) @14223   12 years tbretz Little update.
(edit) @14222   12 years tbretz Added an automatic procedure to perform a create reset.
(edit) @14221   12 years tbretz The () didn't work. Replaced by []||[]
(edit) @14220   12 years tbretz Added free disk space to status page.
(edit) @14219   12 years tbretz Added conversion of a value to a scientific notation.
(edit) @14218   12 years tbretz Unified the event history queue
(edit) @14217   12 years lyard farewell run logs
(edit) @14214   12 years tbretz Added the --msg command line option
(edit) @14213   12 years tbretz Added history of chat messages; added camera switching to event ...
Note: See TracRevisionLog for help on using the revision log.