source: trunk/FACT++

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @11625   13 years tbretz Added new Busy on bit to fad output.
(edit) @11624   13 years tbretz Added new Busy on command.
(edit) @11623   13 years tbretz Added new BusyOn signal to FAD; some layout improvements
(edit) @11622   13 years tbretz Added checks for GL, GLU and QtOpenGL
(edit) @11621   13 years lyard added run number distribution check
(edit) @11620   13 years tbretz Updated output at the end of configure.
(edit) @11619   13 years tbretz Added more log output.
(edit) @11618   13 years tbretz First draft of compiling the raw events viewer.
(edit) @11617   13 years tbretz Renamed MFits to fits; removed wrong ifdef
(edit) @11616   13 years tbretz Changed from using MFits.h to new fits.h in Mars trunk.
(edit) @11615   13 years tbretz Added check for libz.
(edit) @11614   13 years tbretz
(edit) @11613   13 years tbretz Renamed in order to allow the use of the existing Makefile
(edit) @11612   13 years tbretz Moved and renamed in order to be able to use the existing Makefile.
(edit) @11611   13 years tbretz Fixed AddEnv - should be 'host' not 'dns'
(edit) @11610   13 years tbretz Made switching on and off of widgets more userfriendly in the FTU tab
(edit) @11609   13 years tbretz Updated allowed states.
(edit) @11608   13 years tbretz Added initialization for fTimeStamp1, fTimeStamp0 and fTriggerCounter0
(edit) @11607   13 years tbretz Enable sending at least the roi checked by the event builder by DIM; ...
(edit) @11606   13 years tbretz Added SET_TRIGGER_RATE command to GUUI.
(edit) @11605   13 years tbretz Changed the definition of min/max in Compare so that it is compatible ...
(edit) @11604   13 years lyard possible fix for bad run file name
(edit) @11603   13 years tbretz Added roiTM to EVENT header.
(edit) @11602   13 years tbretz Output time with fixed three digits after the point.
(edit) @11595   13 years tbretz Automatically enable all FTUs.
(edit) @11594   13 years tbretz Implemented the correct database query.
(edit) @11593   13 years tbretz Used a fixed-length type for the Dim reports.
(edit) @11592   13 years tbretz Added fMcpReset.
(edit) @11591   13 years tbretz Fixed min/max case for FwVersion
(edit) @11590   13 years tbretz Added MCP 'Reset' button.
(edit) @11589   13 years tbretz delete should be delete[]
(edit) @11588   13 years tbretz Do not send single trigger by default in configuration - needs some ...
(edit) @11587   13 years tbretz Allow RESET in Configuring3; do not disable trigger line before ftm ...
(edit) @11586   13 years tbretz Added a fix when calling option_description::match for older boost ...
(edit) @11585   13 years tbretz Added libDimExtension.la to chatclient.
(edit) @11584   13 years tbretz Fixed 'Connecting' status when thread is not running and sockdef!=0.
(edit) @11583   13 years tbretz Removed a stray #
(edit) @11582   13 years tbretz The EVENT structure now gives the RoiTM
(edit) @11581   13 years tbretz Removed unintentionally comitted debug output.
(edit) @11580   13 years tbretz Added --null option to suppress the output more or less completely.
(edit) @11579   13 years tbretz Added some descriptions for program options.
(edit) @11578   13 years tbretz Moved some part of the initialization from main to Configure::DoParse
(edit) @11577   13 years tbretz Moved Dim:Setup to Main::execute
(edit) @11576   13 years tbretz Added host option.
(edit) @11575   13 years tbretz Moved common option setup to Main.h; created Main namespace
(edit) @11574   13 years tbretz Added the possibility to setup DIM_HOST_NODE with the --host program ...
(edit) @11573   13 years tbretz Do not return the full path in UnLibToolize if it is the local path; ...
(edit) @11566   13 years tbretz Fixed header output.
(edit) @11565   13 years tbretz Automatically initialize the Converter from the defined FITS format.
(edit) @11564   13 years tbretz Added a function to allow the COnverter to be fed with FITS format ...
(edit) @11563   13 years tbretz Added support for the light pulser settings; changed most option names.
(edit) @11548   13 years tbretz New widget should show evt/s rather than evts
(edit) @11547   13 years tbretz Added new members to GUI_STAT
(edit) @11546   13 years tbretz Added new members to GUI_STAT
(edit) @11545   13 years tbretz Added new maxEvt support.
(edit) @11544   13 years tbretz Exchanged wrong fDenable and fDwrite in Configure
(edit) @11543   13 years tbretz Fixed FAD temperature min/max display.
(edit) @11542   13 years tbretz Replaced BOARDID in fits header by just id (BOARDID is too long); made ...
(edit) @11540   13 years lyard added raw events viewer code
(edit) @11539   13 years tbretz Another fix to fix the min/max temperatures
(edit) @11538   13 years tbretz Added the variables for the light pulser settings in StaticData
(edit) @11537   13 years tbretz Fixed once more the temperature compilation for the FADs; removed the ...
(edit) @11536   13 years tbretz Fixed a typo; added some stuff for the light pulser setup
(edit) @11535   13 years tbretz Unified funtions to open an ofstream into a single function; unified ...
(edit) @11534   13 years tbretz Changed GetFileSizeOnDisk to be static so it can be accessed from the ...
(edit) @11533   13 years tbretz Optimized event creation.
(edit) @11532   13 years tbretz Changed fExpectedRuns to keep target configuration; added NumBoards ...
(edit) @11531   13 years tbretz Propagate target configuration to EventBuilderWrapper.
(edit) @11530   13 years tbretz Flush the output during startup immediately.
(edit) @11529   13 years tbretz Added getter for fNullOUtput and fEnableBacklog
(edit) @11528   13 years tbretz Replace a v6 loopback address by a v4 loopback address; we do not ...
(edit) @11527   13 years tbretz Added operator!= to Header
(edit) @11526   13 years tbretz Moved output to Setup function; changed output contents; return ...
(edit) @11525   13 years tbretz Added kCmdConfigFTU as a stub.
(edit) @11524   13 years tbretz Write now takes a const reference
(edit) @11523   13 years tbretz Fixed FadResetTriggerId
(edit) @11522   13 years tbretz Fixed format of fDimStatistics1.
(edit) @11521   13 years tbretz folgende bug-fixes sind drin: - gotNewRun sollte jetzt immer ...
(edit) @11520   13 years tbretz Request static data instead of just the register.
(edit) @11519   13 years tbretz Added new command to configure a single FTU and use this in ...
(edit) @11518   13 years tbretz Fixed includes for g++ 4.5.2
(edit) @11517   13 years tbretz Explicit conversion of function to bool needed for newer g++
(edit) @11516   13 years tbretz Removed some arguments to suppress compiler warnings.
(edit) @11512   13 years tbretz Made mcp be compiled by default.
(edit) @11511   13 years tbretz Updated to latest version of event builder.
(edit) @11510   13 years tbretz improvements to pulse simulation - needs optimization.
(edit) @11509   13 years tbretz send STOP_RUN instead of STOP to FTM.
(edit) @11508   13 years tbretz Fixed the QVariant value in fMcpNumEvents
(edit) @11507   13 years tbretz Fixed a name.
(edit) @11500   13 years lyard fixed a bug related to bad services formatting
(edit) @11499   13 years tbretz Propagate the maximum number of events and the maximum run-type ...
(edit) @11498   13 years tbretz Propagate the maximum number of events and the maximum run-type ...
(edit) @11497   13 years tbretz Added preliminary widgets for starting runs from the GUI.
(edit) @11496   13 years tbretz Optimized ToFits according to the result of the optimization of the ...
(edit) @11495   13 years tbretz Fixed a minor compiler issue from last commit.
(edit) @11494   13 years tbretz Added some code to stop the ftm and the fads.
(edit) @11493   13 years tbretz Receive the trigger id from the ftm; added gauss pulses in case the ...
(edit) @11492   13 years tbretz Send the trigger id with the trigger.
(edit) @11484   13 years tbretz Added a specialized template of SendCommand, suitable to send a string
(edit) @11483   13 years tbretz Added a registry for wildcarded options to detect unaccessed options; ...
Note: See TracRevisionLog for help on using the revision log.