source: trunk/FACT++

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @12360   13 years tbretz Do not check if waiting for answer in ExpertReste if this is a OC reset
(edit) @12359   13 years tbretz Added DRIVE_CONTROL led
(edit) @12358   13 years tbretz Simplified fad tab; added drive led
(edit) @12355   13 years tbretz
(edit) @12354   13 years tbretz Added ratecontrol.
(edit) @12353   13 years tbretz Removed an obsolete comment block
(edit) @12352   13 years tbretz Adapted output of filenames.
(edit) @12351   13 years tbretz Set some fixed control loop parameters as determined in Zurich; output ...
(edit) @12350   13 years tbretz Do directly set the new reference in SetReference.
(edit) @12349   13 years tbretz Removed the warning in case of double delete... so far no problems ...
(edit) @12348   13 years tbretz Use the connection to the DNS as the IP address to get the Local IP.
(edit) @12347   13 years tbretz Make the FEEDBACK receive the data all the time for a combined control ...
(edit) @12346   13 years tbretz Do not use statvfs in SetCurrentFolder.
(edit) @12345   13 years tbretz Display N/40 in decimal
(edit) @12344   13 years tbretz Removed obsolete DataCalib.h and DataCalib.cc from viewer.
(edit) @12343   13 years tbretz Moved some common code between MARS and FACT++ to DrsCalib.h as new ...
(edit) @12342   13 years tbretz Improved output; removed obsolste ?: operators.
(edit) @12341   13 years tbretz Fixed tha calculation of the average ethernet rate; removed min and ...
(edit) @12340   13 years tbretz Unified FAD and EvtBuilder tab as much as possible.
(edit) @12339   13 years tbretz Renamed default pixel map file.
(edit) @12338   13 years tbretz Renamed option ramp-time to ramp-delay
(edit) @12337   13 years tbretz Removed stray debug output.
(edit) @12336   13 years tbretz For the time being go back to idle when a new run was successfully started.
(edit) @12335   13 years tbretz Improved class reference.
(edit) @12334   13 years tbretz Renamed kTakingData to kTriggerOn
(edit) @12333   13 years tbretz Added GetNumFilesOpen and IncreaseRunNumber.
(edit) @12332   13 years tbretz Replaced kTakingData by kTriggerOn
(edit) @12331   13 years tbretz Added the state kWritingData and avoid that run-numbers can be ...
(edit) @12330   13 years tbretz Added state kWritingData.
(edit) @12328   13 years tbretz Renamed FTM::kTakingData to FTM::kTriggerOn
(edit) @12325   13 years tbretz Show VoltageOff as a red bar in the status LED
(edit) @12324   13 years tbretz Fixed some litle stuff in the new ratescan tab.
(edit) @12323   13 years tbretz Added the possibility to change the step size and maximum during a ...
(edit) @12322   13 years tbretz Allow eversything in fact++.rc
(edit) @12320   13 years tbretz Do not set negative axis ranges in handleRateScan.
(edit) @12319   13 years tbretz Switch control off when voltage off.
(edit) @12316   13 years tbretz Removed invalid characters from Dim descriptions
(edit) @12315   13 years tbretz Make sure that the default option gets touched even it is finally not ...
(edit) @12314   13 years tbretz Stop startinga run if datalogger went into error state.
(edit) @12313   13 years tbretz Added an option to disable whole patches. fixed scaling factor in ...
(edit) @12312   13 years tbretz Fixed a workaround.
(edit) @12311   13 years tbretz Fixed writing of the data.
(edit) @12310   13 years lyard fixed a blur display bug
(edit) @12309   13 years tbretz First woring and tested version.
(edit) @12308   13 years tbretz Added specilized template to make sure we do not have to convert ...
(edit) @12302   13 years lyard added clean destruction of qwt objects
(edit) @12301   13 years lyard moved double click to single click
(edit) @12300   13 years lyard added RMS tab and fixed time for old format
(edit) @12297   13 years lyard added RMS tab
(edit) @12295   13 years tbretz Addec code for the rate scan tab display
(edit) @12294   13 years tbretz Added sending of Dim services.
(edit) @12293   13 years tbretz Added controls for rate scan tab.
(edit) @12292   13 years tbretz Added tab for RateScans
(edit) @12291   13 years tbretz Use new features of trigger rate service.
(edit) @12290   13 years tbretz Included EnablePatch and a default constructor for the trigger rates.
(edit) @12289   13 years tbretz Store trigger rates for later display
(edit) @12288   13 years tbretz Addec ontrols for N/4
(edit) @12287   13 years tbretz Adapted format string for TRIGGER_RATES
(edit) @12286   13 years tbretz Fixed a misspelled class name.
(edit) @12284   13 years tbretz Added elapsed time and on time to DrimTriggerRate
(edit) @12283   13 years tbretz Display N/4 logic threshold
(edit) @12282   13 years tbretz Added some N/4 controls
(edit) @12281   13 years tbretz Added the most simple spike removal to the display -- sould be ...
(edit) @12280   13 years tbretz Added the most simple spike removal before the statistics for the ...
(edit) @12279   13 years tbretz Added some more output in case the previous answer was not yet ...
(edit) @12277   13 years lyard fixed the handling of columns names in the datalogger
(edit) @12274   13 years tbretz Allow that UnixTimeUTC is missing.
(edit) @12273   13 years tbretz Implemented feedback controls
(edit) @12272   13 years tbretz Exchanged some values whcih were obviously exhanged
(edit) @12271   13 years tbretz Added the possibility to apply a global offset to the temperature ...
(edit) @12270   13 years tbretz Added the possibility to switch off the update interval.
(edit) @12269   13 years tbretz Fixed wiritng the fits header.
(edit) @12268   13 years tbretz Fixed the output in the txt-file.
(edit) @12267   13 years tbretz Replaced the int16_t for dac by a uint16_t
(edit) @12266   13 years tbretz Disabled some broken sensor widgets by default
(edit) @12254   13 years tbretz Added the possibility to change the update interval online.
(edit) @12253   13 years tbretz Added tab for drive controls.
(edit) @12252   13 years tbretz Added commands to set LED brightness.
(edit) @12251   13 years tbretz Added descriptions for the dim services.
(edit) @12250   13 years tbretz Added some dim descriptions.
(edit) @12249   13 years tbretz Added some Dim descriptions and a new service propagating the nominal ...
(edit) @12248   13 years tbretz Added some state descriptions.
(edit) @12247   13 years tbretz Added state descriptions; replaced WAIT_FOR_RUN_NUMBER by ...
(edit) @12246   13 years tbretz Reverting to last revision.
(edit) @12245   13 years tbretz Reverting to last revision.
(edit) @12244   13 years tbretz Reverting to last revision.
(edit) @12243   13 years tbretz Added output of commands and states to --help
(edit) @12242   13 years tbretz Fixed a typo.
(edit) @12241   13 years tbretz Added possibility to scan in the N-out-of-4 logic.
(edit) @12240   13 years tbretz Some imporved output.
(edit) @12239   13 years tbretz Added configuration options and more help output.
(edit) @12238   13 years tbretz Give scan range with the START command.
(edit) @12237   13 years tbretz Allow to set one patch or pixel as reference for the rate-scan.
(edit) @12236   13 years tbretz Changed signed char to unsigned in output queue.
(edit) @12235   13 years tbretz Some lttle cosmetics; added some help stuff.
(edit) @12234   13 years tbretz Allow STOP in all states.
(edit) @12233   13 years tbretz Switch off debugging by default.
(edit) @12232   13 years tbretz Added some more DEBUG stuff.
(edit) @12231   13 years tbretz Fixed the new DEBUG stuff.
(edit) @12230   13 years tbretz Added some debug options.
Note: See TracRevisionLog for help on using the revision log.