source: trunk/FACT++

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @13243   13 years Jens Buss log output alignment
(edit) @13242   13 years tbretz Updated some log-output.
(edit) @13241   13 years tbretz Added another sanity check for the output.
(edit) @13240   13 years tbretz Added a sanity check for the new output
(edit) @13239   13 years tbretz Propagate G-APD bias offset and set-point seperately.
(edit) @13238   13 years tbretz Updated to new biasctrl commands; removed some obsolete endl; reduced ...
(edit) @13237   13 years tbretz Updated to fit the new biasctrl command and services.
(edit) @13236   13 years tbretz Changed the code in a way that now it operates on floating point ...
(edit) @13235   13 years tbretz Decreased the serial resistance from 1150 Ohm to 1100 Ohm; fixed a ...
(edit) @13224   13 years tbretz Made the number of requests during calibration an option.
(edit) @13223   13 years tbretz Unintentionally changed the allowed states for TRACK_SOURCE with the ...
(edit) @13222   13 years tbretz Replaced W format by C for TRACK_SOURCE
(edit) @13221   13 years tbretz Added TrimQuotes
(edit) @13220   13 years tbretz Improved debugging output.
(edit) @13219   13 years Jens Buss changed waiting time before track command
(edit) @13218   13 years Jens Buss added check if bias, feedback, drive and fad are in the correct state ...
(edit) @13217   13 years tbretz Some improved debug output.
(edit) @13216   13 years tbretz Updated some FITS descriptions.
(edit) @13215   13 years Jens Buss short script to check if bias, feedback, drive and fad are in the ...
(edit) @13214   13 years Jens Buss added check before data run to assure that bias, feedback, drive and ...
(edit) @13213   13 years Jens Buss added check before data run to assure that bias, feedback, drive and ...
(edit) @13212   13 years tbretz Updated state names.
(edit) @13211   13 years tbretz Improves state handling.
(edit) @13210   13 years tbretz Removed all the unnecessary log-messages.
(edit) @13209   13 years tbretz Implemented fVerbose to switch verbosity of default messages on and off.
(edit) @13208   13 years tbretz Write comments as such.
(edit) @13207   13 years tbretz Addeda new log-class: comments
(edit) @13206   13 years tbretz Pipe comments to the log-file; added the missing jump label.
(edit) @13205   13 years lyard added fence from prevent column desc of messages services
(edit) @13204   13 years lyard added output to see which service creates column warning
(edit) @13203   13 years tbretz Updated the options.
(edit) @13202   13 years tbretz Updated the help text.
(edit) @13201   13 years tbretz Made DebugTx optional.
(edit) @13200   13 years tbretz Use Debug() when fDebugTx is enabled.
(edit) @13199   13 years tbretz Replaced wind direction by human readable strings.
(edit) @13198   13 years tbretz Replace degree value for wind direction with human readable value
(edit) @13197   13 years tbretz Shortened some dim descriptions.
(edit) @13196   13 years tbretz Shortened some dim descriptions.
(edit) @13195   13 years tbretz Shortened descriptions to make the datalogger more happy.
(edit) @13194   13 years tbretz Updated some dim descriptions; suppress unecessary output by default.
(edit) @13193   13 years tbretz Print AddService info only when it is really a service.
(edit) @13192   13 years tbretz Some improvement to header evaluation.
(edit) @13191   13 years tbretz Changed the default interval from 55s to 25s. Made it an option.
(edit) @13190   13 years tbretz Propagate max number of events and time correctly as signed int.
(edit) @13189   13 years tbretz Delay setting new volatges during current requests.
(edit) @13188   13 years Jens Buss changed the output
(edit) @13187   13 years Jens Buss changed the output
(edit) @13186   13 years Jens Buss resume data taking after it had to be aborted during first run of four
(edit) @13185   13 years Jens Buss spell check
(edit) @13184   13 years Jens Buss Script for Crab data taking, that automatically takes both wobble ...
(edit) @13183   13 years Jens Buss changed the time waited before sending commands to drivectrl
(edit) @13179   13 years tbretz Updated help text for '.s'
(edit) @13178   13 years tbretz Send current requests in current control mode only when voltage is ...
(edit) @13170   13 years tbretz Added checks for the consistency of the event and trigger number.
(edit) @13169   13 years tbretz Improved some debug output, removed obsolete SetMode; commented out ...
(edit) @13168   13 years tbretz Implemented a function for word wraping
(edit) @13167   13 years tbretz Moved read to cc file; implemented first version of a database interface.
(edit) @13166   13 years tbretz Make sure that the connection is the last in the configuration; ...
(edit) @13165   13 years tbretz Added some improved output.
(edit) @13164   13 years tbretz Implemented new command to set all offsets individually (for current ...
(edit) @13163   13 years tbretz Replaces all 416 by kNumChannels; send the correct command to set the ...
(edit) @13162   13 years Jens Buss DimScript for data taking, that only takes the 4 5min data runs, can ...
(edit) @13161   13 years Jens Buss DimScript for data taking MRK421, that automatically takes both wobble ...
(edit) @13160   13 years tbretz Some clean up to the commands.
(edit) @13159   13 years tbretz Assume that an empty folder name means '.'
(edit) @13138   13 years tbretz Implemented request of current sttaus during current feedback once in ...
(edit) @13137   13 years tbretz Ensure that the calibration starts now that the biasctrl doesn't sent ...
(edit) @13136   13 years tbretz Made sure that the first automatic status request at connection also ...
(edit) @13135   13 years tbretz Updated to v19r30
(edit) @13134   13 years tbretz Added a warning message to help debugging.
(edit) @13127   13 years Jens Buss added a sanity check for fadctrl being in state connected before ...
(edit) @13126   13 years Jens Buss added a sanity check for fadctrl being in state connected before ...
(edit) @13125   13 years Jens Buss with this one can do the Amplitude Calibration for ROI 300
(edit) @13116   13 years tbretz Do only request the status if the voltage is on; get some dummy ...
(edit) @13112   13 years neise incl 45sec wait for current control
(edit) @13111   13 years neise incl. 45sec wait after bias ramped up
(edit) @13110   13 years neise complete rework, based on comments of TB
(edit) @13109   13 years tbretz Removed default for device address; only connect automatically if ...
(edit) @13092   13 years lyard removed useless annoying outputs
(edit) @13091   13 years tbretz Fixed the averaging implemented yest for more verbose output
(edit) @13087   13 years neise changes TEMP_CONTROL to CURRENT_CONTROL
(edit) @13086   13 years neise intitial commit of fb_ped_n_lp
(edit) @13085   13 years neise intitial commit of fb_data
(edit) @13084   13 years neise intitial commit of fb_on
(edit) @13083   13 years lyard added more verbosity
(edit) @13071   13 years tbretz Set the bias create resistor to 1150 Ohm which (according to the ...
(edit) @13070   13 years tbretz Do not send current request in HandleCalibration when still ramping.
(edit) @13069   13 years tbretz Replaced SET_CHANNEL_DAC by SET_GLOBAL_DAC; adapted FFEDBACK state ...
(edit) @13068   13 years tbretz Removed some old debug output when commands are issued.
(edit) @13062   13 years tbretz Updated the resistors. We have now 3900Ohm at the G-APD, 1kOhm serial ...
(edit) @13061   13 years tbretz Adapted to changed in feedback states; skip start values from feedback
(edit) @13060   13 years tbretz Implemented the possibility of a current feedback which corrects the ...
(edit) @13031   13 years tbretz Switch on dot by default; fixed the summary output for colorgcc
(edit) @13030   13 years tbretz Debugged a few issues like too long comments and a missing check.
(edit) @13010   13 years tbretz Fixed the size of the received magic weather reports.
(edit) @13009   13 years tbretz Updated to latest changes.
(edit) @13008   13 years tbretz Scale the patch currents to pixle currents.
(edit) @13007   13 years tbretz Mini change to the hep output.
(edit) @13006   13 years tbretz Reformated the output to make it better fit the help2man conversion.
(edit) @13005   13 years tbretz Added some debug options; moved the PrintHelp at a better position so ...
Note: See TracRevisionLog for help on using the revision log.