source: trunk/FACT++

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @16800   11 years tbretz Changed 90V to 80V
(edit) @16799   11 years lyard fixed fitsCompressor's copy verification issue. I was closing the file ...
(edit) @16798   11 years tbretz Reoragnized the logging output, to get closer to a final version ...
(edit) @16797   11 years tbretz Improved output when a command is sent.
(edit) @16796   11 years tbretz Wait for ftmctrl to be in Valid not Idle; changed the level to detect ...
(edit) @16795   11 years tbretz Added Configuring3 state; improved output whena command is sent:
(edit) @16794   11 years tbretz output some information so that it is aparent which FTU gives the problem.
(edit) @16793   11 years tbretz Fixed a problem with the 32bit shift operator when evaluating the ...
(edit) @16792   11 years tbretz There is not much we can do in Configured2 other than waiting for the ...
(edit) @16791   11 years tbretz Configured is now Configured1 and Configured2
(edit) @16790   11 years tbretz Added a chck for the clock conditioner; ftmctrl should now be in Valid ...
(edit) @16789   11 years tbretz Debugging output seems not needed anymore.
(edit) @16788   11 years tbretz
(edit) @16787   11 years tbretz Improved the output whenever a command is sent.
(edit) @16786   11 years tbretz Make sure no threshold is set initially below the limit (the limit is ...
(edit) @16785   11 years tbretz Replaced kConfigured with kConfigured1 according to the recent change ...
(edit) @16784   11 years tbretz Adapted the state checks according to the recent change in the ftmctrl.
(edit) @16783   11 years tbretz Replaced kConfigured by kConfigured1. This is the state in which ...
(edit) @16782   11 years tbretz Added MagicLidar and Temperature to status page; replaced some ...
(edit) @16781   11 years tbretz Implemented the algorithms needed for the new type current control ...
(edit) @16780   11 years tbretz Of course the server has to run the central loop... looks like it was ...
(edit) @16778   11 years tbretz Set all thresholds at once after the steps have been calculated using ...
(edit) @16777   11 years tbretz Added the long awaited customized template for vector<T>
(edit) @16776   11 years tbretz Implemented SET_SELECTED_THRESHOLDS to allow setting severalö ...
(edit) @16775   11 years tbretz Introduced a new state kConfiguring3 which checks if the messages to ...
(edit) @16774   11 years tbretz After five minutes of inactivity, sleep 10ms instead of 1us if all ...
(edit) @16773   11 years tbretz Introduced the new state kConfiguring3
(edit) @16772   11 years tbretz When calibrated by currents after the calibration was started, wait ...
(edit) @16771   11 years tbretz When compiling a new static buffer to be sent to the FTM, not the last ...
(edit) @16770   11 years tbretz We don't want to dispatch the event (blokcing) but to post the event ...
(edit) @16769   11 years tbretz There is no need to make the scheduling of the async write ...
(edit) @16768   11 years tbretz There is no need to make the scheduling of the async write ...
(edit) @16762   11 years tbretz Do not add zero values, they just bias the average.
(edit) @16761   11 years tbretz
(edit) @16760   11 years tbretz
(edit) @16759   11 years tbretz Removed an unintentional debug out.
(edit) @16745   11 years tbretz Should be DRS temperature not FAD tempreature.
(edit) @16744   11 years tbretz Produce some more output in case the FADs don't got properly connected.
(edit) @16743   11 years tbretz Use the QoS (num open files) of the RUNS service to detect whether a ...
(edit) @16742   11 years tbretz The format string did not match the description.
(edit) @16741   11 years tbretz Removed a stray comma from a dim service description.
(edit) @16737   11 years tbretz Implement a way to check if the (Log) Message Queue is empty. Only ...
(edit) @16736   11 years tbretz Of course we cannot call Execute of the base class, but have to make ...
(edit) @16735   11 years tbretz Some improvements on the messages when changing states.
(edit) @16734   11 years tbretz Some cosmetics.
(edit) @16733   11 years tbretz Removed some obsolete comments:
(edit) @16732   11 years tbretz Make use of the new StateMachineAsio which gets the CPU consumption to ...
(edit) @16731   11 years tbretz Make use of the new StateMachineAsio which gets the CPU consumption to ...
(edit) @16730   11 years tbretz Changed the default queue in three ways: 1) Execute() is called after ...
(edit) @16729   11 years tbretz Make use of the new StateMachineAsio which gets the CPU consumption to ...
(edit) @16728   11 years tbretz Gets the CPU consumption to basically 0 by a more intelligent event ...
(edit) @16727   11 years tbretz Make use of the new StateMachineAsio which gets the CPU consumption to ...
(edit) @16726   11 years tbretz Changed the scope of some variables and functions to allow for ...
(edit) @16697   11 years tbretz Fixed the missing ')'
(edit) @16696   11 years tbretz Ignore non finite values. This can happen if a board is diabled and ...
(edit) @16695   11 years tbretz The timing was not yet correct
(edit) @16694   11 years tbretz Removed the min/max of temperature and refclock and replaced it by 5s ...
(edit) @16692   11 years tbretz Adapted to change in FAD_CONTROL/TEMPERATURE and REFERENCE_CLOCK
(edit) @16691   11 years tbretz Nagle switched off... no idea if this makes any sense, but it could ...
(edit) @16620   11 years tbretz Removed some obsolete stuff.
(edit) @16619   11 years tbretz The incompolete event timeout can now be set as configuration value
(edit) @16618   11 years tbretz Added a different way to count the byted for the statistics; added the ...
(edit) @16617   11 years tbretz Removed the total number of bytes, replaced by a relative one.
(edit) @16616   11 years tbretz setEnable must be setEnabled
(edit) @16614   11 years tbretz Adapted to changes in FAD_CONTROL/RUNS
(edit) @16612   11 years tbretz Removed some obsolete values from FAD_CONTROL/RUNS
(edit) @16589   11 years tbretz Removed Errors and SoftTrig
(edit) @16588   11 years tbretz Access the static data members as static data members (removes also ...
(edit) @16587   11 years tbretz If the calibration has been updated, update it in runClose; removed ...
(edit) @16585   11 years tbretz Removed Errors and SoftTrig
(edit) @16584   11 years tbretz Removed Errors and SoftTrig; let the runClose access the RUN_CTRL (to ...
(edit) @16582   11 years tbretz Removed reference to SoftTrig
(edit) @16581   11 years tbretz Moved also the output to the console to the Queue... let's see if that ...
(edit) @16579   11 years tbretz Reset the whole memory... this should relly not make a big difference; ...
(edit) @16577   11 years tbretz Changed again the logic how the scale is calculated.
(edit) @16572   11 years tbretz Made the last changes compile and removed the stray #
(edit) @16571   11 years tbretz Make sure that no run-file is open (this gives quite some probability ...
(edit) @16570   11 years tbretz We have to check for the MCP state, too, to make sure that the state ...
(edit) @16569   11 years tbretz Show an out-of-memory message not more often than once a second; ...
(edit) @16568   11 years tbretz Updated the scale on the event plot - the scale for drs-gain events ...
(edit) @16567   11 years tbretz Sending the RawData must be the vector (the data) not the pointer itself.
(edit) @16566   11 years tbretz Added some more output to the log for debugging.
(edit) @16565   11 years tbretz Ratecontrol might still believe that the trigger is on, so we force ...
(edit) @16562   11 years tbretz Added a possibility to move an entry from another list into this list.
(edit) @16541   11 years tbretz Use the Time already determined.
(edit) @16540   11 years tbretz Fixed some typos in the last commit
(edit) @16539   11 years tbretz Move the update for the fDimWriteStats to UpdateRuns, so it does not ...
(edit) @16538   11 years tbretz Improved a bit the interpretation of a int64, now it is interpreted as ...
(edit) @16537   11 years tbretz Only wait if this is a valid server, e.g. dimctrl is not.
(edit) @16536   11 years tbretz Send the RESET_CONFIGURE as soon as we are InProgress
(edit) @16534   11 years tbretz Send CLOSE_OPEN_FILES when a run is stopped.
(edit) @16533   11 years tbretz Renamed WritingData of fadctrl to RunInProgress
(edit) @16532   11 years tbretz Renamed state WritingData of fadctrl to RunInProgress
(edit) @16531   11 years tbretz Improved statistics sent with GUI_STATS; some cosmetics
(edit) @16530   11 years tbretz Let applyCalib know how big the current queue is to optimize cpu ...
(edit) @16529   11 years tbretz Adapted to changed in GUI_STATS
(edit) @16528   11 years tbretz Made the list a class member to avoid accesses from outsize and ...
(edit) @16527   11 years tbretz Do not go out of TakingData only because the trigger is switched off.
(edit) @16526   11 years tbretz Adapted FAD section to updates in GUI_STATS
(edit) @16525   11 years tbretz Adapted to changes in GUI_STATS
Note: See TracRevisionLog for help on using the revision log.