source: trunk

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @13218   13 years Jens Buss added check if bias, feedback, drive and fad are in the correct state ...
(edit) @13217   13 years tbretz Some improved debug output.
(edit) @13216   13 years tbretz Updated some FITS descriptions.
(edit) @13215   13 years Jens Buss short script to check if bias, feedback, drive and fad are in the ...
(edit) @13214   13 years Jens Buss added check before data run to assure that bias, feedback, drive and ...
(edit) @13213   13 years Jens Buss added check before data run to assure that bias, feedback, drive and ...
(edit) @13212   13 years tbretz Updated state names.
(edit) @13211   13 years tbretz Improves state handling.
(edit) @13210   13 years tbretz Removed all the unnecessary log-messages.
(edit) @13209   13 years tbretz Implemented fVerbose to switch verbosity of default messages on and off.
(edit) @13208   13 years tbretz Write comments as such.
(edit) @13207   13 years tbretz Addeda new log-class: comments
(edit) @13206   13 years tbretz Pipe comments to the log-file; added the missing jump label.
(edit) @13205   13 years lyard added fence from prevent column desc of messages services
(edit) @13204   13 years lyard added output to see which service creates column warning
(edit) @13203   13 years tbretz Updated the options.
(edit) @13202   13 years tbretz Updated the help text.
(edit) @13201   13 years tbretz Made DebugTx optional.
(edit) @13200   13 years tbretz Use Debug() when fDebugTx is enabled.
(edit) @13199   13 years tbretz Replaced wind direction by human readable strings.
(edit) @13198   13 years tbretz Replace degree value for wind direction with human readable value
(edit) @13197   13 years tbretz Shortened some dim descriptions.
(edit) @13196   13 years tbretz Shortened some dim descriptions.
(edit) @13195   13 years tbretz Shortened descriptions to make the datalogger more happy.
(edit) @13194   13 years tbretz Updated some dim descriptions; suppress unecessary output by default.
(edit) @13193   13 years tbretz Print AddService info only when it is really a service.
(edit) @13192   13 years tbretz Some improvement to header evaluation.
(edit) @13191   13 years tbretz Changed the default interval from 55s to 25s. Made it an option.
(edit) @13190   13 years tbretz Propagate max number of events and time correctly as signed int.
(edit) @13189   13 years tbretz Delay setting new volatges during current requests.
(edit) @13188   13 years Jens Buss changed the output
(edit) @13187   13 years Jens Buss changed the output
(edit) @13186   13 years Jens Buss resume data taking after it had to be aborted during first run of four
(edit) @13185   13 years Jens Buss spell check
(edit) @13184   13 years Jens Buss Script for Crab data taking, that automatically takes both wobble ...
(edit) @13183   13 years Jens Buss changed the time waited before sending commands to drivectrl
(edit) @13179   13 years tbretz Updated help text for '.s'
(edit) @13178   13 years tbretz Send current requests in current control mode only when voltage is ...
(edit) @13173   13 years Daniela Dorner added (script to build sequences)
(edit) @13172   13 years Daniela Dorner added (crontab file for fact_opr on isdc-viewer00)
(edit) @13171   13 years Daniela Dorner improved output, fixed bugs
(edit) @13170   13 years tbretz Added checks for the consistency of the event and trigger number.
(edit) @13169   13 years tbretz Improved some debug output, removed obsolete SetMode; commented out ...
(edit) @13168   13 years tbretz Implemented a function for word wraping
(edit) @13167   13 years tbretz Moved read to cc file; implemented first version of a database interface.
(edit) @13166   13 years tbretz Make sure that the connection is the last in the configuration; ...
(edit) @13165   13 years tbretz Added some improved output.
(edit) @13164   13 years tbretz Implemented new command to set all offsets individually (for current ...
(edit) @13163   13 years tbretz Replaces all 416 by kNumChannels; send the correct command to set the ...
(edit) @13162   13 years Jens Buss DimScript for data taking, that only takes the 4 5min data runs, can ...
(edit) @13161   13 years Jens Buss DimScript for data taking MRK421, that automatically takes both wobble ...
(edit) @13160   13 years tbretz Some clean up to the commands.
(edit) @13159   13 years tbretz Assume that an empty folder name means '.'
(edit) @13158   13 years Daniela Dorner added insert to nightly status tables, removed insert for status ...
(edit) @13154   13 years Daniela Dorner added (script to check status of transfer for deleting data)
(edit) @13153   13 years Daniela Dorner treat case that file is not yet there
(edit) @13152   13 years Daniela Dorner bugfix for drsfiles
(edit) @13138   13 years tbretz Implemented request of current sttaus during current feedback once in ...
(edit) @13137   13 years tbretz Ensure that the calibration starts now that the biasctrl doesn't sent ...
(edit) @13136   13 years tbretz Made sure that the first automatic status request at connection also ...
(edit) @13135   13 years tbretz Updated to v19r30
(edit) @13134   13 years tbretz Added a warning message to help debugging.
(edit) @13127   13 years Jens Buss added a sanity check for fadctrl being in state connected before ...
(edit) @13126   13 years Jens Buss added a sanity check for fadctrl being in state connected before ...
(edit) @13125   13 years Jens Buss with this one can do the Amplitude Calibration for ROI 300
(edit) @13117   13 years tbretz gDirectory->GetListOfKeys() can be NULL... fixed.
(edit) @13116   13 years tbretz Do only request the status if the voltage is on; get some dummy ...
(edit) @13115   13 years lyard moved EXTNAME keyword further down for compatibility with fverify
(edit) @13112   13 years neise incl 45sec wait for current control
(edit) @13111   13 years neise incl. 45sec wait after bias ramped up
(edit) @13110   13 years neise complete rework, based on comments of TB
(edit) @13109   13 years tbretz Removed default for device address; only connect automatically if ...
(edit) @13108   13 years Daniela Dorner added check if directory exists
(edit) @13107   13 years Daniela Dorner added tmp path for rsyn
(edit) @13099   13 years Daniela Dorner run CheckStatus.sh more often
(edit) @13098   13 years Daniela Dorner adapted time for one job
(edit) @13097   13 years Daniela Dorner removed not needed lines
(edit) @13094   13 years Daniela Dorner improved logging
(edit) @13093   13 years Daniela Dorner added drs file to transfer
(edit) @13092   13 years lyard removed useless annoying outputs
(edit) @13091   13 years tbretz Fixed the averaging implemented yest for more verbose output
(edit) @13087   13 years neise changes TEMP_CONTROL to CURRENT_CONTROL
(edit) @13086   13 years neise intitial commit of fb_ped_n_lp
(edit) @13085   13 years neise intitial commit of fb_data
(edit) @13084   13 years neise intitial commit of fb_on
(edit) @13083   13 years lyard added more verbosity
(edit) @13082   13 years Daniela Dorner added drs-files to rsync and check for existance of links
(edit) @13079   13 years Daniela Dorner extra log file for merpp
(edit) @13078   13 years tbretz Added th possibility to use a real regular expression.
(edit) @13071   13 years tbretz Set the bias create resistor to 1150 Ohm which (according to the ...
(edit) @13070   13 years tbretz Do not send current request in HandleCalibration when still ramping.
(edit) @13069   13 years tbretz Replaced SET_CHANNEL_DAC by SET_GLOBAL_DAC; adapted FFEDBACK state ...
(edit) @13068   13 years tbretz Removed some old debug output when commands are issued.
(edit) @13067   13 years Daniela Dorner added new monitoring script
(edit) @13066   13 years Daniela Dorner added new monitoring scripts
(edit) @13065   13 years Daniela Dorner added temp directory for rsync
(edit) @13064   13 years Daniela Dorner added (script to check database for failed and crashed jobs)
(edit) @13063   13 years Daniela Dorner added (script to check global logfile for errors and warnings)
(edit) @13062   13 years tbretz Updated the resistors. We have now 3900Ohm at the G-APD, 1kOhm serial ...
(edit) @13061   13 years tbretz Adapted to changed in feedback states; skip start values from feedback
Note: See TracRevisionLog for help on using the revision log.