Timeline


and

Jul 27, 2011:

9:12 PM Changeset [11675] by tbretz
Added Channel/Chip to ADC tab
9:02 PM Changeset [11674] by tbretz
Switch off backlog for ConsoleStream per default.
9:02 PM Changeset [11673] by tbretz
Added 'no-dim' option to make boost happy; added function to convert PT1000 data to temperatures (~1% rms)
8:21 PM Changeset [11672] by tbretz
Changed CBC on ADT tab to CBCC
8:16 PM Changeset [11671] by tbretz
Fixed a bug in nc_format - nc_format_buffer is already the pointer and can be used directly. The address of it just points somewhere into the memory.
8:14 PM Changeset [11670] by tbretz
Simplified writing into ring-buffer by using modulo operator.
7:34 PM Changeset [11669] by tbretz
Fixed a possible dead lock in eth_write_*
7:03 PM Changeset [11668] by neise
6:57 PM Changeset [11667] by neise
6:57 PM Changeset [11666] by neise
5:16 PM Changeset [11665] by tbretz
Added fState to DimDynamicData
5:16 PM Changeset [11664] by tbretz
Added locked state to states.
5:15 PM Changeset [11663] by tbretz
Output fState from header.
5:15 PM Changeset [11662] by tbretz
Added header.fState to dynamic data.
5:15 PM Changeset [11661] by tbretz
Added locked status for clock conditioner.
5:14 PM Changeset [11660] by weitzel
FTM status states newly defined
5:14 PM Changeset [11659] by tbretz
Added clock conditioner LED for locked status.
4:33 PM Changeset [11658] by weitzel
4:27 PM Changeset [11657] by tbretz
Fixed temperatures provided by FAD.
4:24 PM Changeset [11656] by tbretz
4:23 PM Changeset [11655] by tbretz
fixed the board time display in the ADC tab.
4:18 PM Changeset [11654] by weitzel
two new status states introduced for FTM to indicate lock status of clock conditioner
3:43 PM Changeset [11653] by vogler
clock cond interface with PLL lock seperate
3:37 PM Changeset [11652] by vogler
ftm_definition for firmware v 4
2:03 PM Changeset [11651] by tbretz
Renamed TriggerId to TriggerCounter
12:43 PM Changeset [11650] by lyard
removed warning messages
12:23 PM Changeset [11649] by tbretz
Addes epcial pixel color for under- and overflow.
11:55 AM Changeset [11648] by vogler
clock cond interface, new settings loaded only when changed
10:18 AM Changeset [11647] by tbretz
Allow negative values in diable other patches.
10:17 AM Changeset [11646] by tbretz
Fixed cases in which fThresholdIdx can be negative ('all')
10:17 AM Changeset [11645] by tbretz
Fixed a typo.
10:07 AM Changeset [11644] by tbretz
Fixed a bug in SetThreshold.
9:28 AM Changeset [11643] by tbretz
Implemented setting min/max for color scale in rate tab
8:56 AM Changeset [11642] by lyard
removed references to Mars
8:44 AM Changeset [11641] by tbretz
Enabled the possibility to choose a pixel and a patch even taking data.
8:40 AM Changeset [11640] by tbretz
Added group box around FTU rate controls.
8:32 AM Changeset [11639] by tbretz
Changed number of allowed channels from 9 to 36
8:24 AM Changeset [11638] by tbretz
Set busy-off to normal and configure all DACs

Jul 26, 2011:

11:49 PM Changeset [11637] by tbretz
Artificially increased the size of the refclock widet of the FAD tab to display the unit properly.
11:45 PM Changeset [11636] by tbretz
SET_DAC_VALUE expectes two int not two short.
11:43 PM Changeset [11635] by tbretz
Added services and gui elements for FAD DAC values.
10:12 PM Changeset [11634] by tbretz
Fixed index when setting thresholds in EvealOptions
9:30 PM Changeset [11633] by tbretz
Fixed a double dot when checking the trigger options.
9:19 PM Changeset [11632] by tbretz
Renamed continous busy to constant busy.
9:17 PM Changeset [11631] by tbretz
Added some stuff for the new event viewer.
9:09 PM Changeset [11630] by tbretz
Added program options to set the DAC of the trheshold values.
9:05 PM Changeset [11629] by tbretz
Added busy on bit.
9:03 PM Changeset [11628] by tbretz
Added new definitions for busy on.
9:03 PM Changeset [11627] by tbretz
Split ENABLE_BUSY into ENABLE_BUSY_ON/_OFF
9:02 PM Changeset [11626] by tbretz
Added new busy on bit to header output.
9:02 PM Changeset [11625] by tbretz
Added new Busy on bit to fad output.
9:01 PM Changeset [11624] by tbretz
Added new Busy on command.
9:01 PM Changeset [11623] by tbretz
Added new BusyOn signal to FAD; some layout improvements
5:42 PM Changeset [11622] by tbretz
Added checks for GL, GLU and QtOpenGL
3:58 PM Changeset [11621] by lyard
added run number distribution check
3:37 PM Changeset [11620] by tbretz
Updated output at the end of configure.
3:32 PM Changeset [11619] by tbretz
Added more log output.
3:27 PM Changeset [11618] by tbretz
First draft of compiling the raw events viewer.
3:26 PM Changeset [11617] by tbretz
Renamed MFits to fits; removed wrong ifdef
3:23 PM Changeset [11616] by tbretz
Changed from using MFits.h to new fits.h in Mars trunk.
1:34 PM Changeset [11615] by tbretz
Added check for libz.
1:21 PM Changeset [11614] by tbretz
1:18 PM Changeset [11613] by tbretz
Renamed in order to allow the use of the existing Makefile
1:14 PM Changeset [11612] by tbretz
Moved and renamed in order to be able to use the existing Makefile.
1:11 PM Changeset [11611] by tbretz
Fixed AddEnv - should be 'host' not 'dns'
1:11 PM Changeset [11610] by tbretz
Made switching on and off of widgets more userfriendly in the FTU tab
1:01 PM Changeset [11609] by tbretz
Updated allowed states.
12:56 PM Changeset [11608] by tbretz
Added initialization for fTimeStamp1, fTimeStamp0 and fTriggerCounter0
12:42 PM Changeset [11607] by tbretz
Enable sending at least the roi checked by the event builder by DIM; Removed the other event checks for the time being
11:40 AM Changeset [11606] by tbretz
Added SET_TRIGGER_RATE command to GUUI.
11:26 AM Changeset [11605] by tbretz
Changed the definition of min/max in Compare so that it is compatible with FwVersion; added some TODO outputs; removed some unsused variables in function calls
11:26 AM Changeset [11604] by lyard
possible fix for bad run file name
11:25 AM Changeset [11603] by tbretz
Added roiTM to EVENT header.
11:23 AM Changeset [11602] by tbretz
Output time with fixed three digits after the point.
11:08 AM Changeset [11601] by dorner
11:02 AM Changeset [11600] by dorner
added user to displayed table
10:51 AM Changeset [11599] by dorner
added various new features (min, max, user, show/hide of columns, ...) and changed layout
10:50 AM Changeset [11598] by dorner
added ldap user authentication (not yet enabled)
10:49 AM Changeset [11597] by dorner
added (functions for ldap-authentication)
10:47 AM Changeset [11596] by dorner
added (explanations to be displayed)
10:23 AM Changeset [11595] by tbretz
Automatically enable all FTUs.
10:22 AM Changeset [11594] by tbretz
Implemented the correct database query.
10:22 AM Changeset [11593] by tbretz
Used a fixed-length type for the Dim reports.
10:21 AM Changeset [11592] by tbretz
Added fMcpReset.
10:21 AM Changeset [11591] by tbretz
Fixed min/max case for FwVersion
10:20 AM Changeset [11590] by tbretz
Added MCP 'Reset' button.

Jul 25, 2011:

8:28 PM Changeset [11589] by tbretz
delete should be delete[]
7:15 PM Changeset [11588] by tbretz
Do not send single trigger by default in configuration - needs some delay; enable busy to ensure consistency
7:14 PM Changeset [11587] by tbretz
Allow RESET in Configuring3; do not disable trigger line before ftm trigger is not disabled.
1:44 PM Changeset [11586] by tbretz
Added a fix when calling option_description::match for older boost versions.
1:21 PM Changeset [11585] by tbretz
Added libDimExtension.la to chatclient.
1:02 PM Changeset [11584] by tbretz
Fixed 'Connecting' status when thread is not running and sockdef!=0.
12:20 PM Changeset [11583] by tbretz
Removed a stray #
12:18 PM Changeset [11582] by tbretz
The EVENT structure now gives the RoiTM

Jul 24, 2011:

10:47 PM Changeset [11581] by tbretz
Removed unintentionally comitted debug output.
10:34 PM Changeset [11580] by tbretz
Added --null option to suppress the output more or less completely.
9:41 PM Changeset [11579] by tbretz
Added some descriptions for program options.
9:20 PM Changeset [11578] by tbretz
Moved some part of the initialization from main to Configure::DoParse
9:11 PM Changeset [11577] by tbretz
Moved Dim:Setup to Main::execute
9:11 PM Changeset [11576] by tbretz
Added host option.
9:00 PM Changeset [11575] by tbretz
Moved common option setup to Main.h; created Main namespace
8:43 PM Changeset [11574] by tbretz
Added the possibility to setup DIM_HOST_NODE with the --host program option.
8:21 PM Changeset [11573] by tbretz
Do not return the full path in UnLibToolize if it is the local path; fixed this case for fact++.rc
6:37 PM Changeset [11572] by tbretz
Latest changes.
6:37 PM Changeset [11571] by tbretz
Latest changes.
6:36 PM Changeset [11570] by tbretz
Don't print the header contents by default.
6:36 PM Changeset [11569] by tbretz
removed some obsolete calls to Format(); correctly display the relative and absolute error
6:33 PM Changeset [11568] by tbretz
Changed fHiGainFirst/fHiGainLast from Byte_t to UShort_t to support the DRS with 1024 samples.
6:29 PM Changeset [11567] by tbretz
Do not propagate non finite numbers.
6:23 PM Changeset [11566] by tbretz
Fixed header output.
5:52 PM Changeset [11565] by tbretz
Automatically initialize the Converter from the defined FITS format.
5:51 PM Changeset [11564] by tbretz
Added a function to allow the COnverter to be fed with FITS format data: ToFormat
12:34 PM Changeset [11563] by tbretz
Added support for the light pulser settings; changed most option names.
12:15 PM Changeset [11562] by tbretz
Added latest changes.
12:15 PM Changeset [11561] by tbretz
Added HAVE_ZLIB
12:14 PM Changeset [11560] by tbretz
Fixed check for SIMPLE; added HAVE_ZLIB support.
11:09 AM Changeset [11559] by tbretz
Removed MZlib, MFits; added izstream, fits
11:08 AM Changeset [11558] by tbretz
Fixed an ifsef in GetObjectInfo
11:07 AM Changeset [11557] by tbretz
Added exceptions if supported by the compiler; removed check for TELESCOP keyword
11:05 AM Changeset [11556] by tbretz
Replaced MZlib by izstream; added check for TELESCOP key.
11:04 AM Changeset [11555] by tbretz
added fIsSigned; adapted GetSample; added GetMin; changed code in GetMax
11:02 AM Changeset [11554] by tbretz
Added fIsSigned data memeber; increased version number.
11:01 AM Changeset [11553] by tbretz
Replaced MZlib with izstream
10:52 AM Changeset [11552] by tbretz
10:51 AM Changeset [11551] by tbretz
Moved all the source code to the header; set the fail and bad bit more properly.
10:49 AM Changeset [11550] by tbretz
10:49 AM Changeset [11549] by tbretz

Jul 22, 2011:

11:12 PM Changeset [11548] by tbretz
New widget should show evt/s rather than evts
11:02 PM Changeset [11547] by tbretz
Added new members to GUI_STAT
11:01 PM Changeset [11546] by tbretz
Added new members to GUI_STAT
11:01 PM Changeset [11545] by tbretz
Added new maxEvt support.
11:00 PM Changeset [11544] by tbretz
Exchanged wrong fDenable and fDwrite in Configure
10:39 PM Changeset [11543] by tbretz
Fixed FAD temperature min/max display.
10:39 PM Changeset [11542] by tbretz
Replaced BOARDID in fits header by just id (BOARDID is too long); made error messages compile again; another fix to fix the temperature min/max transmission
5:10 PM Changeset [11541] by weitzel
FTM IP changed
4:18 PM Changeset [11540] by lyard
added raw events viewer code
1:05 PM Changeset [11539] by tbretz
Another fix to fix the min/max temperatures
11:19 AM Changeset [11538] by tbretz
Added the variables for the light pulser settings in StaticData
11:18 AM Changeset [11537] by tbretz
Fixed once more the temperature compilation for the FADs; removed the Fatal and Error messages which were for debugging; unified some error messages.
11:17 AM Changeset [11536] by tbretz
Fixed a typo; added some stuff for the light pulser setup
8:53 AM Changeset [11535] by tbretz
Unified funtions to open an ofstream into a single function; unified some output texts in case of failure; return error from EvalOptions if log file could not be opened; use DimWriteStatistics::GetFileSizeOnDisk to replace GetFileSize code
8:50 AM Changeset [11534] by tbretz
Changed GetFileSizeOnDisk to be static so it can be accessed from the outside.
8:50 AM Changeset [11533] by tbretz
Optimized event creation.
8:49 AM Changeset [11532] by tbretz
Changed fExpectedRuns to keep target configuration; added NumBoards and reserved to FITS.
8:48 AM Changeset [11531] by tbretz
Propagate target configuration to EventBuilderWrapper.
8:48 AM Changeset [11530] by tbretz
Flush the output during startup immediately.
8:48 AM Changeset [11529] by tbretz
Added getter for fNullOUtput and fEnableBacklog
8:46 AM Changeset [11528] by tbretz
Replace a v6 loopback address by a v4 loopback address; we do not support v6.
8:46 AM Changeset [11527] by tbretz
Added operator!= to Header
8:45 AM Changeset [11526] by tbretz
Moved output to Setup function; changed output contents; return localhost if none was detected.
8:45 AM Changeset [11525] by tbretz
Added kCmdConfigFTU as a stub.
8:44 AM Changeset [11524] by tbretz
Write now takes a const reference
8:44 AM Changeset [11523] by tbretz
Fixed FadResetTriggerId

Jul 21, 2011:

6:37 PM Changeset [11522] by tbretz
Fixed format of fDimStatistics1.
6:34 PM Changeset [11521] by tbretz
folgende bug-fixes sind drin: - gotNewRun sollte jetzt immer sofort kommen - usdMem / maxMem sollte jetzt richtig gesetzt werden - open run 0 sollte nicht mehr auftreten (fuer das erste event) Neu implementiert: - falsche ROI werden nicht mehr akzeptiert; die ROI wird jeweils festgelegt durch das erste gelesenen board des ersten events eines neuen runs. Muss gelten: die ersten 8 pixel muessen identische ROI haben, Pixel 9 muss roi >= roi0 sein ( > wenn noch TM info dabei ist) mehrere zaehler werden neu an factStat uebergeben: int32_t badRoiE; //# boards with wrong roi (inconsistent in event) int32_t badRoiR; //# boards with wrong roi (inconsistent in run) int32_t badRoiB; //# boards with wrong roi (inconsistent in board) int32_t badRoi[NBOARDS]; //# wrong roi per board - RUN_HEAD enthaelt neu: uint16_t NroiTM; // <=0 wenn keine TM info da ist // (aber in event-structure ist leere TM drin...) - EVENT enthaelt neu: uint32_t NumBoards ; // number of active boards included // <40 fuer incomplete events
5:44 PM Changeset [11520] by tbretz
Request static data instead of just the register.
5:36 PM Changeset [11519] by tbretz
Added new command to configure a single FTU and use this in SetThreshold and in EnablePixel.
1:28 PM Changeset [11518] by tbretz
Fixed includes for g++ 4.5.2
1:27 PM Changeset [11517] by tbretz
Explicit conversion of function to bool needed for newer g++
1:26 PM Changeset [11516] by tbretz
Removed some arguments to suppress compiler warnings.
12:40 PM Changeset [11515] by tbretz
Added special pixel 1438 and 1439.
12:30 PM Changeset [11514] by weitzel
FTM: changeover to firmware ID 3
12:14 PM Changeset [11513] by vogler
lightpulser interface modified to reduce LED current and light output
12:13 PM Changeset [11512] by tbretz
Made mcp be compiled by default.
12:11 PM Changeset [11511] by tbretz
Updated to latest version of event builder.
12:04 PM Changeset [11510] by tbretz
improvements to pulse simulation - needs optimization.
12:03 PM Changeset [11509] by tbretz
send STOP_RUN instead of STOP to FTM.
12:02 PM Changeset [11508] by tbretz
Fixed the QVariant value in fMcpNumEvents
12:01 PM Changeset [11507] by tbretz
Fixed a name.
11:30 AM Changeset [11506] by dorner
added index.html for this webinterface
11:24 AM Changeset [11505] by dorner
added plenty of new features to view and edit the configuration database
11:21 AM Changeset [11504] by dorner
added (interface to view configuration db)
11:20 AM Changeset [11503] by dorner
added (script to get timestamp from database)
11:20 AM Changeset [11502] by dorner
added (script to get pulldown with date)
11:19 AM Changeset [11501] by dorner
added (script to get pulldown with programs)
9:31 AM Changeset [11500] by lyard
fixed a bug related to bad services formatting

Jul 20, 2011:

8:20 PM Changeset [11499] by tbretz
Propagate the maximum number of events and the maximum run-type together with the run-type when configuring/starting a run.
8:20 PM Changeset [11498] by tbretz
Propagate the maximum number of events and the maximum run-type together with the run-type when configuring/starting a run.
8:19 PM Changeset [11497] by tbretz
Added preliminary widgets for starting runs from the GUI.
6:49 PM Changeset [11496] by tbretz
Optimized ToFits according to the result of the optimization of the MFits reader.
6:36 PM Changeset [11495] by tbretz
Fixed a minor compiler issue from last commit.
6:10 PM Changeset [11494] by tbretz
Added some code to stop the ftm and the fads.
6:10 PM Changeset [11493] by tbretz
Receive the trigger id from the ftm; added gauss pulses in case the data was triggered from the ftm.
6:09 PM Changeset [11492] by tbretz
Send the trigger id with the trigger.
6:04 PM Changeset [11491] by tbretz
Latest changes.
6:03 PM Changeset [11490] by tbretz
Replaced fPCTime by a two byte buffer and init full time; added StartCell to reading.
6:01 PM Changeset [11489] by tbretz
Added fStartCells and increased version number
6:00 PM Changeset [11488] by tbretz
Added iterator to start cell.
5:58 PM Changeset [11487] by tbretz
Optimized reverse copy procedure; added HasKey
5:57 PM Changeset [11486] by tbretz
Added support for FITS files in readdaq.
2:54 PM Changeset [11485] by weitzel
FTM firmware features now the config_single_FTU command (to be tested); also some defaults were changed
10:27 AM Changeset [11484] by tbretz
Added a specialized template of SendCommand, suitable to send a string
10:27 AM Changeset [11483] by tbretz
Added a registry for wildcarded options to detect unaccessed options; for this EvalConfiguration(const Configuration&) has been changed to EvalOptions(Configuration&)
8:04 AM Changeset [11482] by tbretz
Fixed a problem with stoi when the string was empty.
8:03 AM Changeset [11481] by tbretz
Replaced boost::thread by std::thread and boost::bind by std::bind from the C++0x standard

Jul 19, 2011:

9:09 PM Changeset [11480] by tbretz
Removed obsolete include.
9:03 PM Changeset [11479] by tbretz
Replaces ato/atof by stoi/stof; replaced boost::lexical_cast by to_string
8:30 PM Changeset [11478] by tbretz
Removed some obsolete include.
8:23 PM Changeset [11477] by tbretz
Make use of Main.h
8:19 PM Changeset [11476] by tbretz
Removed some obsolete includes.
8:19 PM Changeset [11475] by tbretz
Added libDimExtension for drivectrl
8:18 PM Changeset [11474] by tbretz
Removed some obsolete includes; made it compile again.
8:00 PM Changeset [11473] by tbretz
Removed some obsolete includes.
7:55 PM Changeset [11472] by tbretz
Replaced boost::thread by std::thread.
7:54 PM Changeset [11471] by tbretz
Replaced boost::array by std::array
4:38 PM Changeset [11470] by tbretz
Improved output.
4:37 PM Changeset [11469] by tbretz
Fixed EnableAllPixels
4:37 PM Changeset [11468] by tbretz
Only plot the created commands in debig mode.
4:37 PM Changeset [11467] by tbretz
Replaced value by INT32_MAX; replaced StartPix with StartCell
4:36 PM Changeset [11466] by tbretz
Improved random data.
4:35 PM Changeset [11465] by tbretz
Fixed the expected size in the SetClockFrequency tab.
4:34 PM Changeset [11464] by tbretz
Fixed some display in the ADC tab.
2:13 PM Changeset [11463] by lyard
added backlog of events and log without dim
12:33 PM Changeset [11462] by ogrimm
Fixed bug crashing raw data browser when connected to DIM
11:13 AM Changeset [11461] by tbretz
Made also Entry public -- for newer root versions and moved ReadBlock down.

Jul 18, 2011:

5:52 PM Changeset [11460] by tbretz
Latest changes.
5:51 PM Changeset [11459] by tbretz
5:50 PM Changeset [11458] by ogrimm
Fixed detection of erroneous trigger cell
5:50 PM Changeset [11457] by tbretz
Added MRawFitsRead
5:49 PM Changeset [11456] by tbretz
Read the first header already at preprocessing time so that at least some header is available.
5:49 PM Changeset [11455] by ogrimm
Crash when reducing number of boards in FADctrl fixed
5:48 PM Changeset [11454] by tbretz
Fixed raplacing of extension and added fits as a valid extension.
5:47 PM Changeset [11453] by tbretz
Use FITS reader instead of raw-reader if it is a FITS raw file.
5:46 PM Changeset [11452] by tbretz
Added Getter for fCameraVersion
5:44 PM Changeset [11451] by tbretz
Au^Cmatically use MGeomCamFACT if the run header says that it is a fact camera.
5:19 PM Changeset [11450] by tbretz
Added some comments about FITS basic types.
5:18 PM Changeset [11449] by tbretz
Improved some output.
4:50 PM Changeset [11448] by tbretz
Added setter to init fact data and to set the format values.
4:49 PM Changeset [11447] by tbretz
Added virtual function to initialize reading event data.
4:35 PM Changeset [11446] by tbretz
Removed the debug values for maxevt and maxtime; removed two obsolete comment lines.
4:26 PM Changeset [11445] by tbretz
Updated access to run-number and store it into fExpectedRuns instead of fStartedRuns; implemented setting of exipry time and maximum event numbers; replaced DimEventData with just EVENT; updated FITS writing
4:25 PM Changeset [11444] by tbretz
Updated access to run-number.
4:24 PM Changeset [11443] by tbretz
Latest updates.
4:23 PM Changeset [11442] by tbretz
Replaced DimEventData by EVENT
4:22 PM Changeset [11441] by tbretz
Write a proper FITS header; removed obsolete fMjdRef data member
2:41 PM Changeset [11440] by tbretz
Added some comment.
2:40 PM Changeset [11439] by tbretz
Added Iso() member function.
1:24 PM Changeset [11438] by tbretz
Added MFits
1:23 PM Changeset [11437] by tbretz
1:21 PM Changeset [11436] by tbretz
1:20 PM Changeset [11435] by tbretz
Further optimized seeking so that we always seek relative.
9:57 AM Changeset [11434] by tbretz
Removed the need of fill_buffer
9:31 AM Changeset [11433] by tbretz
There is no need to make the derivative from istream virtual.
9:30 AM Changeset [11432] by tbretz
Added function DataMember which will return a pointer to a data member from the dictionary.
9:27 AM Changeset [11431] by tbretz
Outsourced OpenFile and ReadRunHeader to their own funtions.
9:26 AM Changeset [11430] by tbretz
Made ReadEvent and SkipEvent virtual.
9:25 AM Changeset [11429] by tbretz
Added -D__MARS__ to AcLiC
9:24 AM Changeset [11428] by tbretz
Included fstream

Jul 15, 2011:

3:47 PM Changeset [11427] by tbretz
the upper bound of searching the maximum was wrong
3:46 PM Changeset [11426] by tbretz
Added GaussProb2D
3:44 PM Changeset [11425] by ogrimm
Bug fix for previous trigger cell sanity check
3:43 PM Changeset [11424] by tbretz
Fixed seeking in gzipped files; increased buffer size
3:26 PM Changeset [11423] by tbretz
To be able to properly remobe the .libs also check the current path if filename is without path.
3:25 PM Changeset [11422] by tbretz
Don't use just a single buffer for writing, it might become overwritten if a new event is added to the queue before the olf one was sent.
3:24 PM Changeset [11421] by tbretz
Fall back from configured to connected as soon as the corresponding run has been opened.
3:23 PM Changeset [11420] by tbretz
Added Prescaler stuff and goNewRun feature.
3:23 PM Changeset [11419] by tbretz
Added prescaler stuff.
2:10 PM Changeset [11418] by tbretz
Replaced the include of MessageDim with MessageImp
2:10 PM Changeset [11417] by tbretz
Removed an obsolete comment block.
1:42 PM Changeset [11416] by tbretz
Removed an obsolete bool.
1:40 PM Changeset [11415] by tbretz
Added some const qualifiers.
12:12 PM Changeset [11414] by ogrimm
Added debugging for 'double signal' effect on FAD
7:44 AM Changeset [11413] by ogrimm
Fixed bug when changing displayed event scope channel too fast

Jul 14, 2011:

6:43 PM Changeset [11412] by tbretz
Fixed a problem with a possible infinite loop in the display.
6:37 PM Changeset [11411] by tbretz
6:36 PM Changeset [11410] by tbretz
Fixed a check which was always true.
6:35 PM Changeset [11409] by tbretz
Some name change to get rid of some compiler warnings.
6:32 PM Changeset [11408] by tbretz
Propagate argument to fThread.Run
6:32 PM Changeset [11407] by tbretz
Some improvements to get rid of compiler warnnings.
12:15 PM Changeset [11406] by lyard
Open the log file right away if path given in configuration
11:42 AM Changeset [11405] by lyard
various improvements of the datalogger
9:22 AM Changeset [11404] by tbretz
Added fact++.rc global configuration file.
9:01 AM Changeset [11403] by tbretz
Use Vec instead of Get and make sure 'console' is not accessed if not available.
9:00 AM Changeset [11402] by tbretz
Changed the default qos from kInfo to kMessage
8:59 AM Changeset [11401] by tbretz
Do not output = if avlue is empty
8:59 AM Changeset [11400] by tbretz
Do not output = if value is empty
8:58 AM Changeset [11399] by tbretz
Added microseconds to time output.
8:58 AM Changeset [11398] by tbretz
Added microseconds to time output.
8:58 AM Changeset [11397] by tbretz
Made write public to be accessed from Main.h
8:57 AM Changeset [11396] by tbretz
Adapted output to what we have now elsewhere.
8:57 AM Changeset [11395] by tbretz
Set the Dim timestamp to the given time.
8:56 AM Changeset [11394] by tbretz
Fixed a warning in SetTriggerRate
8:56 AM Changeset [11393] by tbretz
Added Time_t()
8:55 AM Changeset [11392] by tbretz
Added milliseconds to time output.

Jul 13, 2011:

11:28 PM Changeset [11391] by tbretz
Added svn path as PACKAGE_URL
11:27 PM Changeset [11390] by tbretz
Updated startup block
11:19 PM Changeset [11389] by tbretz
UPdated startup block
11:09 PM Changeset [11388] by tbretz
Added svn revision to output at startup.
10:44 PM Changeset [11387] by tbretz
Added code to unify access to parsed options; added GetOptions
10:43 PM Changeset [11386] by tbretz
Added output of a lot of information at startup.
8:02 PM Changeset [11385] by ogrimm
Board time published as DIM service, files written with permissions for OTHER
6:42 PM Changeset [11384] by tbretz
6:41 PM Changeset [11383] by tbretz
Added dim libraries to fad and ftm; added mcp
6:41 PM Changeset [11382] by tbretz
Added dim libraries to fad and ftm; added mcp
6:39 PM Changeset [11381] by tbretz
Some changes to the way filenames are determined; made MessageImp a base class of DataFileImp for simplicity; redirect debug-out to console.
6:38 PM Changeset [11380] by tbretz
Implemented sending triggers from the ftm to the fad via Dim.
6:37 PM Changeset [11379] by tbretz
Updated the behaviour of the configure command; allow all possible values to be send as trigger rate; fixed increasing of the run-number when a new run is started.
6:36 PM Changeset [11378] by tbretz
Updated the bahaviour of the CONFIGURE command.
3:00 PM Changeset [11377] by tbretz
Renamed TriggerId to EventCounter; added code to configure run-types
2:59 PM Changeset [11376] by tbretz
Updated writing of FITS; pipe MessageImp to all writers; enabled initialization of fRunNumber; updated FITS writing to a simplified but working version.
2:57 PM Changeset [11375] by tbretz
Renamed TriggerId to EventCounter; added struct Configuration; added operator== to EventHeader; removed some obsolete old commented code; added new states
2:56 PM Changeset [11374] by tbretz
Set default run-number to 1; renamed TriggerId to EventCounter
2:55 PM Changeset [11373] by tbretz
Minor change to some log-output
2:51 PM Changeset [11372] by tbretz
Some little changes to the output; use Vec<> instead of Get<vector<string>> fo rthe configuration
2:50 PM Changeset [11371] by tbretz
Do not display debug messages in the message output at the bottom
2:50 PM Changeset [11370] by tbretz
Set URL from SetEndpoint(tcp::endpoint)
2:03 PM Changeset [11369] by ogrimm
Added bias channel check program BiCh
7:55 AM Changeset [11368] by ogrimm
Finding own script path does not work reliably under ubuntu, removed
7:36 AM Changeset [11367] by ogrimm
Logon script finds its own directory, updated 'updateall' script

Jul 12, 2011:

10:58 PM Changeset [11366] by tbretz
Added output to see if GUI was properly closed.
10:57 PM Changeset [11365] by tbretz
Align right for fTriggerInterval
10:34 PM Changeset [11364] by tbretz
Updated some log-out.
8:33 PM Changeset [11363] by tbretz
Enforced an ROI of 1 for the ADC display.
5:13 PM Changeset [11362] by ogrimm
Default voltage allowed for pixel and channel commands
4:39 PM Changeset [11361] by ogrimm
Default voltages taken from configuration data
3:29 PM Changeset [11360] by ogrimm
Updates to make Edd more responsive with high incoming event rate
1:12 PM Changeset [11359] by tbretz
Implemented a solution to solve a multi-threading issue in factOut; added the possibility to allow output of kDebug messages coming from the event builder.
1:08 PM Changeset [11358] by tbretz
Updated display of PC time in ADC tab
12:00 PM Changeset [11357] by tbretz
Improved a bit the console output.
11:59 AM Changeset [11356] by tbretz
Renamed command to switch between command and data socket(s), added SET_DEBUG_EVENT_BUILDER_OUT
11:58 AM Changeset [11355] by tbretz
Do not propagate values larger than the maximum to the progress bar.
11:57 AM Changeset [11354] by tbretz
Renamed command to enable data-socket
11:09 AM Changeset [11353] by dorner
added script to display and edit entries of the configuration database (ProgramOptions) and scripts which are called by this script
11:04 AM Changeset [11352] by dorner
created directory for web interface to database ProgramOptions
11:02 AM Changeset [11351] by dorner
create directory for fact web pages
9:06 AM Changeset [11350] by tbretz
Added argument to ResetThread

Jul 11, 2011:

5:33 PM Changeset [11349] by tbretz
Fixed variable names.
4:16 PM Changeset [11348] by tbretz
Added some more setter functions to StaticData to simplify the configuration.
4:08 PM Changeset [11347] by tbretz
Used Vec instead of Get in EvalConfiguration.
4:07 PM Changeset [11346] by tbretz
Use Vec instead of Get
4:06 PM Changeset [11345] by tbretz
Implemented a Getter especially for vectors.
4:05 PM Changeset [11344] by tbretz
Implemented the possibility to setup a full run-type.
4:04 PM Changeset [11343] by tbretz
Some fixes to the initialization procedure.
4:03 PM Changeset [11342] by tbretz
Divided Reset into soft and hard reset.
11:15 AM Changeset [11341] by tbretz
Updated; minor changes; compile chatclient and chatserver by default; do not compile dclient5 and dserver2 by default
11:13 AM Changeset [11340] by tbretz
Updated help text for RESET
11:13 AM Changeset [11339] by tbretz
Added setup of the clock-conditioner frequencies.
11:12 AM Changeset [11338] by tbretz
Moved setup of the clock-conditioner to the config-file.
11:09 AM Changeset [11337] by tbretz
Set the CommandStates_t back to the previous values; updated ResetThread
11:09 AM Changeset [11336] by tbretz
Added code to allow option values as hexadecimal numbers; added Get and Has for sections and for default values.
11:08 AM Changeset [11335] by tbretz
Added g_reset and some other updates and minor fixes.
11:07 AM Changeset [11334] by tbretz
Changed some unsigned int to signed int.
11:07 AM Changeset [11333] by tbretz
Changed some unsigned int to signed int.
11:07 AM Changeset [11332] by tbretz
Added FAD Reset button
11:05 AM Changeset [11331] by tbretz
Added FAD reset button

Jul 10, 2011:

10:21 PM Changeset [11330] by tbretz
Check whether option is available before accessing 'console' option.
10:20 PM Changeset [11329] by tbretz
Fixed a typo in HasPrint - print-unknown wasn't recognized correctly; removed the Has-clause from the Get-template; added GetMap and GetKeys
10:19 PM Changeset [11328] by tbretz
Updated EvalConfiguration to parse the address options one by one.
6:23 PM Changeset [11327] by tbretz
Removed some obsolete includes.
5:55 PM Changeset [11326] by tbretz
Added .! command to be able to execute shell commands.
5:05 PM Changeset [11325] by tbretz
Updated output when opening and closing files.
5:05 PM Changeset [11324] by tbretz
Updated logging when openeing and closing a file; fixed format of STATISTICS1; added fDimWriteStats
5:04 PM Changeset [11323] by tbretz
Fixed a wrong array index (should be b instead of k)
5:04 PM Changeset [11322] by tbretz
Added handling of FAD_CONTROL/STATS service.
5:03 PM Changeset [11321] by tbretz
Updated some ranges.
3:43 PM Changeset [11320] by tbretz
Added -d as shortcut for --debug.
3:42 PM Changeset [11319] by tbretz
Updated program options description.
3:26 PM Changeset [11318] by tbretz
Removed souble error message.
3:21 PM Changeset [11317] by tbretz
Removed obsolete fStatsPeriod; updated statistics
3:20 PM Changeset [11316] by tbretz
Fixed return value for stat() of filename; added GetUpdateInterval
2:07 PM Changeset [11315] by tbretz
Added DimWriteStatistics; added ConnectionUSB; added biasctrl
2:07 PM Changeset [11314] by tbretz
2:06 PM Changeset [11313] by tbretz
2:05 PM Changeset [11312] by tbretz
Adapted datalogger STATS service; fixed the case of null bytes in handleFadRuns
2:04 PM Changeset [11311] by tbretz
Enabled datalogger Stop button.
1:54 PM Changeset [11310] by tbretz
Updated datalogger controls.
1:52 PM Changeset [11309] by tbretz
Removed confusing output.
1:49 PM Changeset [11308] by tbretz
Updated name and usage of new statistics class; adapted and fixed new program options; updated includes; changed run-timeout to milliseconds.
1:48 PM Changeset [11307] by tbretz
Updated includes.
1:43 PM Changeset [11306] by tbretz
1:43 PM Changeset [11305] by tbretz
1:42 PM Changeset [11304] by tbretz
Simplified; removed the mutex; improved thread cencelation

Jul 8, 2011:

4:10 PM Changeset [11303] by tbretz
Added command to print only the currently allowed events.
4:10 PM Changeset [11302] by tbretz
Added PrintListOfAllowedEvents
4:01 PM Changeset [11301] by tbretz
Replaced the use of the =-operator where possible by the use of a cinstructor for StaticData
4:00 PM Changeset [11300] by tbretz
Replaced the operator= by a constructor in StaticData
3:58 PM Changeset [11299] by tbretz
Added a missing default argument.
3:53 PM Changeset [11298] by tbretz
Updated FAD statistics
3:53 PM Changeset [11297] by tbretz
Added the possibility in ConnectionFTM to compare the requested and the answered configuration; removed consistency check in Enable and SetTriggerSeq; revised teh states of ConnectionFTM and StateMachineFTM to support the configuration state; adde CONFIGURE and RESET_CONFIGURE command
3:42 PM Changeset [11296] by tbretz
Moved state definitions here; added operator== to StaticData
3:42 PM Changeset [11295] by tbretz
Updated to support new statistics; added sending of filename to fDimRuns
3:41 PM Changeset [11294] by tbretz
Removed the output of an obsolete error; adapted FAD statistics; adapted states of FTM
3:35 PM Changeset [11293] by tbretz
Updated statistics.
3:25 PM Changeset [11292] by lyard
added configurations to everything that can be tweaked
9:49 AM Changeset [11291] by lyard
Little changes and cosmetics with statistics service
9:34 AM Changeset [11290] by lyard
Moved the files statistics to a separate class and improved transitions
6:35 AM Changeset [11289] by ogrimm
Fixed bug when changing active boards just before a run is started

Jul 7, 2011:

7:56 PM Changeset [11288] by tbretz
Added virtual functions for Lock and Unlock
7:55 PM Changeset [11287] by tbretz
Added locking around HandleEvent
7:55 PM Changeset [11286] by tbretz
Updated to new statistic; changed to new runStat values; added ResetThread
7:54 PM Changeset [11285] by tbretz
Added 'RESET'
7:54 PM Changeset [11284] by tbretz
Added the possibility to set the update rate for self triggered events.
7:53 PM Changeset [11283] by tbretz
Adapted some log output to standard used in the other classes.
7:52 PM Changeset [11282] by tbretz
Mainly new statistics.
7:51 PM Changeset [11281] by tbretz
Removed obsolete gi_usedMem
7:51 PM Changeset [11280] by tbretz
Added virtual function for locking; fixed the order of instantiation of the base classes of StateMachineDim.
7:50 PM Changeset [11279] by tbretz
Added code for new fadctrl statistics; better treatment of enable of fad and event builder widget; better treatment of event builder led
7:48 PM Changeset [11278] by tbretz
Added preliminary code to start data logger.
7:48 PM Changeset [11277] by tbretz
Added button to start data logger.
1:56 PM Changeset [11276] by tbretz
Set default for FAD buffer progress bar to 0.
1:49 PM Changeset [11275] by tbretz
Fixed fServiceList.erase in RemoveServer; the entry might not exist.
1:48 PM Changeset [11274] by tbretz
Fixed a typo in a comment.
1:38 PM Changeset [11273] by tbretz
Added EVT_STAT and GUI_STAT; changed ADC values to signed
12:46 PM Changeset [11272] by tbretz
Fixed a bug in MHFalseSource::SetupFill - must be CopyBinning instead of SetBinning.

Jul 6, 2011:

5:25 PM Changeset [11271] by tbretz
Changed default for fDimMessage from en empty string to a NULL pointer.
5:21 PM Changeset [11270] by tbretz
Added a missing ;
5:19 PM Changeset [11269] by tbretz
Moved calling of RemoveAllServices from RemoveAllServers and RemoveServer to DimServiceInfoList and changed FITS ValueType for bytes from 'S' to 'B'
4:51 PM Changeset [11268] by dorner
removed required() for option schedule-database-name
4:21 PM Changeset [11267] by tbretz
Included a call to RemoveAllServices to RemoveServer.
4:20 PM Changeset [11266] by tbretz
Removed cose which got obsolete due to the include of RemoveAllServices into RemoveAllServers and RemoveServer.
4:06 PM Changeset [11265] by lyard
Added the RemoveServer and RemoveAllServers functions. Seems to have fixed a bug occuring if the dns crashed (dim services were somehow corrupted)
1:51 PM Changeset [11264] by tbretz
Removed includes which are now in Main.h
1:50 PM Changeset [11263] by tbretz
Added include of boost/thread.hpp and LocalControl.h
1:49 PM Changeset [11262] by tbretz
Made SetCurrentState a protected functioj so that derives state machines can call it.
1:49 PM Changeset [11261] by tbretz
Removed SetCurrentState; removed includes which are now in Main.h; made argument of EvalConfiguration const; Replaced 'Closing' in output by the correct term 'Closed'
1:33 PM Changeset [11260] by tbretz
Fixed a problem introduced with the splitting of Connect which caused the connection to e.g. the FTM getting established twice.
10:11 AM Changeset [11259] by ogrimm
Bug fixed that caused wrong calculation of the number of bytes written to file if several boards where active
9:53 AM Changeset [11258] by ogrimm
pthread_attr_init() was missing in Evidence class constructor
9:35 AM Changeset [11257] by tbretz
Removed the --no-dim option, because it won't work anyway at the moment.

Jul 5, 2011:

11:08 AM Changeset [11256] by tbretz
Updated reference about regex for database url.
11:05 AM Changeset [11255] by tbretz
Updated regex to evaluate schedule-database.
10:25 AM Changeset [11254] by tbretz
Changed SetConfiguration to EvalConfiguration; changed positional argument from schedule-database to new schedule; added --schedule to be able to just schedule something.
10:24 AM Changeset [11253] by tbretz
Changed SetConfiguration to EvalConfiguration and its return value from bool to int; Main now returns with its return value if it is positive or zero.

Jul 4, 2011:

10:22 PM Changeset [11252] by tbretz
Added a first draft of a unified main program.
10:21 PM Changeset [11251] by tbretz
Started to unify the main program of the io_service based control program.
8:50 PM Changeset [11250] by tbretz
Fixed a problem in the C version of GetLocalIp
8:23 PM Changeset [11249] by tbretz
Added warning for non virtual destructors.
8:22 PM Changeset [11248] by tbretz
Fixed a function description.
8:22 PM Changeset [11247] by tbretz
Made destructors virtual.
8:07 PM Changeset [11246] by tbretz
Made destructor virtual -- destructors of base classes should always be virtual.

Jul 2, 2011:

4:34 PM Changeset [11245] by tbretz
Unified all three run modes.

Jul 1, 2011:

4:54 PM Changeset [11244] by tbretz
'repaired' switch in openRun and set default for fFileFormat to kNone
4:53 PM Changeset [11243] by tbretz
Added SET_FILE_FORMAT
4:51 PM Changeset [11242] by tbretz
Fixed switching off AutoScale in ADC window; delete fEventData in destructor
4:10 PM Changeset [11241] by weitzel
FTM: changes in library file: firmware ID increased to v2 and CMD_CONFIG_FTU added
10:52 AM Changeset [11240] by tbretz
Set default y-scale of Rate plot to [0,1010]
10:47 AM Changeset [11239] by tbretz
Fixed reference clock indices.
10:40 AM Changeset [11238] by tbretz
Changed Adc_Data from uint16 to int16
10:11 AM Changeset [11237] by tbretz
Fixed calculation of g_maxMem
10:11 AM Changeset [11236] by tbretz
Changed again the default address for ocal ip resolution to a default for 'public networks' 14.0.0.1
9:40 AM Changeset [11235] by tbretz
Little layout changes
9:31 AM Changeset [11234] by tbretz
Small layout updates
9:21 AM Changeset [11233] by tbretz
Layouted FAD tab
9:15 AM Changeset [11232] by neise
supports firmware v0206
8:49 AM Changeset [11231] by tbretz
Display DIM_DNS_NODE.
8:49 AM Changeset [11230] by tbretz
Updated initialization process according to the other programs.
8:38 AM Changeset [11229] by tbretz
Reverted commit by mistake.
8:30 AM Changeset [11228] by tbretz
Layout update FAD tab

Jun 30, 2011:

11:35 PM Changeset [11227] by tbretz
Changed startup tab
11:29 PM Changeset [11226] by tbretz
broadcast whole events via Dim; made MainWindow and abstract base class and implemented the Adc tab widgets into MainWindow and FactGui
8:55 PM Changeset [11225] by tbretz
Implemented REFRENECE_CLOCK
8:23 PM Changeset [11224] by tbretz
Send FADC data once a second.
8:18 PM Changeset [11223] by neise
Fixed ADC pipeline display
8:17 PM Changeset [11222] by neise
Added StartRun/StopRun
7:01 PM Changeset [11221] by tbretz
Removed q as shortcut for --quit to avoid confusion with --quiet
2:16 PM Changeset [11220] by lyard
now use the toStrings method of the converter
2:01 PM Changeset [11219] by lyard
added 2 write error states + bug fix

Jun 29, 2011:

11:08 PM Changeset [11218] by tbretz
Added --cmd and --quit program option.
10:59 PM Changeset [11217] by tbretz
Made ProcessLine a public function to allow for --cmd command.
10:59 PM Changeset [11216] by tbretz
Added cmd and quit command.
9:02 PM Changeset [11215] by tbretz
Added NightAsInt
9:02 PM Changeset [11214] by tbretz
Little change.
5:28 PM Changeset [11213] by tbretz
Renamed the fad temperature led.
4:12 PM Changeset [11212] by neise
v0207 features DRS reset, but needs hardware mods. Do not use
3:25 PM Changeset [11211] by tbretz
Added ToStrings
3:15 PM Changeset [11210] by tbretz
Moved coding and decoding of the 12 bit temperature to the conversion from and to network byte order.
3:14 PM Changeset [11209] by tbretz
Added trigger id and fake temperature.
3:14 PM Changeset [11208] by tbretz
Added a new constructor which takes special_values as argument.
3:13 PM Changeset [11207] by tbretz
Many little and more changed to teh FAD and event builder controls; added DRS temperature transmission

Jun 28, 2011:

2:44 PM Changeset [11206] by weitzel
FTM network settings for La Palma added
2:28 PM Changeset [11205] by ogrimm
Adaptions to allow compilation on Ubuntu
9:03 AM Changeset [11204] by neise
Fixed DIM service for PLLLCK

Jun 27, 2011:

5:22 PM Changeset [11203] by tbretz
Removedmore obsolete stuff.
5:21 PM Changeset [11202] by tbretz
Removed some obsolete code.
5:03 PM Changeset [11201] by tbretz
Inverted bit for command socket.
4:59 PM Changeset [11200] by tbretz
Restructured the FAD gui; made widgets for run-number and ROI active.
3:06 PM Changeset [11199] by tbretz
Removed fDimCurrentEvent; wrapped update of fDimEvents into a 1s check.
3:03 PM Changeset [11198] by tbretz
Do noz print 'Trying to connect' message more than once.
3:03 PM Changeset [11197] by tbretz
Changed the fStatus2 array to support also an 'all diconnected but switched on' state.
3:03 PM Changeset [11196] by tbretz
Changed the FAD Led status to support also an 'all diconnected but switched on' state.
2:45 PM Changeset [11195] by tbretz
Updated with some more status bit support.
1:27 PM Changeset [11194] by tbretz
Removed an obsolete debug out.
1:26 PM Changeset [11193] by tbretz
Replaced the constructor of EventHeader with a vector<uint16_t> by just a pointer of type uint16_t
1:25 PM Changeset [11192] by tbretz
Made the tcp::endpoint and the slot number a member of ConenctionFAD; notify the EventBuilderWrapper about updates of e.g. the header.
1:24 PM Changeset [11191] by tbretz
Workaroudn for a problem with negative gi_NumConnects
1:00 PM Changeset [11190] by tbretz
Added the possbility to give an IP Address with a port rather than a name which must be resolved; send keep alive packages in 10s intervals
8:43 AM Changeset [11189] by ogrimm
Fixed bug for online display of small events (missing flush of temporary file)
Note: See TracTimeline for information about the timeline view.