Timeline
05/07/12:
- 20:45 Changeset [13589] by
- Improved that acces s to the states; added many new services.
- 20:45 Changeset [13588] by
- Added icons.
- 20:45 Changeset [13587] by
- Improvements to the histogram display; some other little fixes and improvements
- 17:47 Changeset [13586] by
- correct HEADAS path, paths for running FillAuxData.sh at ISDC
- 13:35 Changeset [13585] by
- Added two new states: trigger on and taking data
- 11:45 Changeset [13584] by
- changed distribution histograms from TH1F to TH1I
- 11:44 Changeset [13583] by
- title changes of distribution histograms and changed them from TH1F to TH1I
- 11:43 Changeset [13582] by
- bugfix in lin. regression of rising edge
- 11:40 Changeset [13581] by
- added check showing pulses where slope of rising edge was calculated to be negative
- 10:42 Changeset [13580] by
- run skript only for last three days or last X GB of data
- 10:39 Changeset [13579] by
- added check for empty return of mysql
- 10:39 Changeset [13578] by
- added check if directory is mounted
- 09:52 Changeset [13577] by
- small bugfix
- 09:51 Changeset [13576] by
- small bugfix of unknownvariable _tf_
- 09:35 Changeset [13575] by
- dded filling and drawing of distribution histograms
- 09:34 Changeset [13574] by
- added calculation of distance of half rising edge to maximum
- 09:33 Changeset [13573] by
- added value for the distance of maximum und half rising edge
- 09:26 Changeset [13572] by
- changed distibution options from P to M
05/06/12:
- 00:19 Changeset [13571] by
- Added description to the new service.
05/05/12:
- 23:58 Changeset [13570] by
- Added a service to distribute the current run-type information.
- 19:27 Changeset [13569] by
- 19:26 Changeset [13568] by
- Many more changes and improvements; mainly made everything dynamic so that more fancy menus are possible; added back and home button.
05/04/12:
- 23:53 Changeset [13567] by
- More simplifications and optimizations
- 21:51 Changeset [13566] by
- debugged memory allocation bug. mem of trigger_offset was allocated too small. baseline, gain and trigger_offset were filled in the wrong way in the contructor. in GetCalEvent() baseline, gain and trigger_offset were indexed wrongly. performance test to be done.
- 21:16 Changeset [13565] by
- Even more updates to the camera drawing
- 20:54 Changeset [13564] by
- More updates to the camera drawing
- 19:53 Changeset [13563] by
- Fixed a problem with firefox; added drawing of the full camera; use translations for drawing; replaced discs by hexagons
- 19:52 Changeset [13562] by
- Removed event counter - there is only one event per second anyway; implemented different scaling depending on whether the event is calibrated or not
- 19:41 Changeset [13561] by
- Send the drs step as quality with the data so that it can be detected if it is calibrated data or not.
- 16:28 Changeset [13560] by
- use_this_peak
- 16:28 Changeset [13559] by
- changed naming of histograms
- 16:27 Changeset [13558] by
- now histograms will be plotted again
- 10:40 Changeset [13557] by
- Fixed another sign - so we are back with the previous solution.
- 10:34 Changeset [13556] by
- The voltage U0 had the wrong sign.
05/03/12:
- 22:58 Changeset [13555] by
- Added the missing color for the source name in the tracking tab.
- 22:51 Changeset [13554] by
- Added an error output if we still miss a connection to a subsystem and somebody tries to start a run.
- 22:51 Changeset [13553] by
- Fixed a unit problem in the new rasistor correction; added some output which helps in case of problems; correctly display the calibration offset when the calibration is started.
- 22:46 Changeset [13552] by
- Some fixes, updates and improvements to get a first version fully working.
- 22:36 Changeset [13551] by
- removed some multiplications from GetCalEvent() to Constructor ... not yet tested
- 22:34 Changeset [13550] by
- compiling with optimize
- 18:54 Changeset [13549] by
- Commented out the use of fStatic, because with the called default constructor it led to crahes.
- 13:49 Changeset [13548] by
- deleted fits* datafile
- 13:48 Changeset [13547] by
- deleted Pixel** pixel
- 13:29 Changeset [13546] by
- set datafile to NULLpointer
- 13:28 Changeset [13545] by
- added deletion of datafile at the end of programm
- 13:19 Changeset [13544] by
- un uncommented deletion of distribution histos in destructor
- 13:16 Changeset [13543] by
- un uncommented histogram deletion in destructor
- 13:12 Changeset [13542] by
- verbosity cout changes
- 13:11 Changeset [13541] by
- verbosity cout changes
- 12:47 Changeset [13540] by
- un-uncommented Fill Histograms and removed some debugging couts
- 12:38 Changeset [13539] by
- deleted useless cout
- 11:55 Changeset [13538] by
- bugfix: pixelID in new Pixel
- 11:51 Changeset [13537] by
- added Loading of libz.so for isdc machines
- 11:50 Changeset [13536] by
- added dependency for binary
- 10:39 Changeset [13535] by
- Makefile works
- 09:01 Changeset [13534] by
- added a lot of includes
- 08:59 Changeset [13533] by
- hanged verbosity levels
- 08:39 Changeset [13532] by
- deleted IsReadyForDataTaking --> moved to ServiceScripts
- 06:02 Changeset [13531] by
- changed path to so lib
- 06:01 Changeset [13530] by
- changed default filename and added check if file exists
05/02/12:
- 22:58 Changeset [13529] by
- Removed debug status in output file.
- 22:57 Changeset [13528] by
- Added missing infoHandlers for drive control.
- 22:41 Changeset [13527] by
- Fixed a typo in an element name
- 22:01 Changeset [13526] by
- Added cycling color of dots; moved some code to isSliding; new simplified sliding algorithm; simplified doresize
- 22:00 Changeset [13525] by
- Switched off padding for rows.
- 21:59 Changeset [13524] by
- Included rdot and ldot and removed the default time.
- 21:16 Changeset [13523] by
- A little simplification.
- 17:26 Changeset [13522] by
- now with correct filenames
- 17:24 Changeset [13521] by
- makefile for FPulseOverlay.C
- 17:23 Changeset [13520] by
- update some bugfixes in the destructor
- 17:22 Changeset [13519] by
- result for today NOT WORKING but i commit annyways
- 15:56 Changeset [13518] by
- RawData uses CalFactFits as default, see __init__() parameter use_CalFactFits
- 15:12 Changeset [13517] by
- reverted former check in ... was too messy ... sorry
- 15:05 Changeset [13516] by
- test of RawData using CalFactFits
- 14:37 Changeset [13515] by
- Renamed test scripts and Class calls within to new naming standard.
- 14:32 Changeset [13514] by
- Renamed the header guards in calfactfits.h to CALFACTFITS_H.
- 14:11 Changeset [13513] by
- debugged _test_SlowData
- 13:39 Changeset [13512] by
- using now class FactFits instead of class fits
- 13:33 Changeset [13511] by
- file deleted, class is now called SlowData in module pyfact
- 13:30 Changeset [13510] by
- renamed class fits to FactFits
- 13:30 Changeset [13509] by
- renamed to factfits.h
- 13:29 Changeset [13508] by
- deleted
- 13:28 Changeset [13507] by
- renamed class
- 13:23 Changeset [13506] by
- creating shared object files from C++ header files
- 12:53 Changeset [13505] by
- added class SlowData. This class was formerly known as FactFits in module factfits.py
- 12:39 Changeset [13504] by
- adding deprication warning
- 11:19 Changeset [13503] by
- Part 2 of the file moving, comments see last commit.
- 11:17 Changeset [13502] by
- Moved calfits.h to pyfact and the example scripts to examples. P.S. The examples might not work currently du to wrong paths. P.P.S. the files and classes will be renamed soon by DN.
05/01/12:
- 15:45 Changeset [13501] by
- took of unused cout
- 15:34 Changeset [13500] by
- some major bugfixes
- 15:34 Changeset [13499] by
- some major bugfixes
- 15:01 Changeset [13498] by
- Added rates from ftm control.
- 14:27 Changeset [13497] by
- Added current calibration; some updates to the colors
- 14:10 Changeset [13496] by
- Added simple graph drawing.
- 13:18 Changeset [13495] by
- Removed some warning given by the Closure Compiler; exported onload
- 12:42 Changeset [13494] by
- added bool for saving histograms or not
- 12:42 Changeset [13493] by
- added bool for saving histograms or not
- 12:42 Changeset [13492] by
- added bool for saving histograms or not
- 12:41 Changeset [13491] by
- added bool for saving histograms or not
- 12:41 Changeset [13490] by
- added bool for saving histograms or not
- 12:25 Changeset [13489] by
- destructor for DistributionHistos
- 12:25 Changeset [13488] by
- destructor for DistributionHistos
- 12:15 Changeset [13487] by
- modified the destructor for array usage
- 12:10 Changeset [13486] by
- additional if conditions for debug histos
- 12:02 Changeset [13485] by
- put construction of debug histograms into an own function
- 10:19 Changeset [13484] by
- Moved all dim service description outside the class, so that they can be instantiated after the initialisation, to ensure that everything is properly initialized before the infoHandler is called.
04/30/12:
- 22:57 Changeset [13483] by
- Added BIAS_CONTROL/VOLTAGE
- 22:53 Changeset [13482] by
- The calibration offset must be subtracted from the voltage to calculate the resistor.
- 22:48 Changeset [13481] by
- Reverting to last revision.
- 22:48 Changeset [13480] by
- Reverting to last revision.
- 22:47 Changeset [13479] by
- Adapted to the latest html/js changes.
- 22:32 Changeset [13478] by
- Include DimData; removed class definition for DimData; updated calculation of bias current offset; added subscription to BIAS_CONTROL/VOLTAGE; removed the group-wise scaling in the display of the bias currents for the time being.
- 20:07 Changeset [13477] by
- Moved the instantisation of fTriggerOn before the DimStampedInfo instances.
- 19:24 Changeset [13476] by
- bugfixes after first compilation
- 19:23 Changeset [13475] by
- bugfixes after first compilation
- 19:23 Changeset [13474] by
- bugfixes after first compilation
- 19:22 Changeset [13473] by
- bugfixes after first compilation
- 19:22 Changeset [13472] by
- Bugfixes after first compilation
- 19:21 Changeset [13471] by
- added initialisation of parameter slopeOfRisingEdge
- 14:23 Changeset [13470] by
- Many updates.
- 05:48 Changeset [13469] by
- ignore root files
- 05:47 Changeset [13468] by
- init
04/27/12:
- 18:34 Changeset [13467] by
- budfix lost } added
- 18:30 Changeset [13466] by
- comments added
- 18:25 Changeset [13465] by
- initial commit
- 12:38 Changeset [13464] by
- SmartFACT++ web-pages -- first draft.
- 12:30 Changeset [13463] by
- A very simple and light weight wrapper around DimInfo
- 12:29 Changeset [13462] by
- First version of a dim client writing input for the SmartFACT++ web-page.
04/26/12:
- 14:24 Changeset [13461] by
- Added passing NROI and NPIX to weave.
- 11:47 Changeset [13460] by
- evolving
- 11:45 Changeset [13459] by
- init
- 11:43 Changeset [13458] by
- ...testing...
- 11:05 Changeset [13457] by
- Corrected the CURRENT service description.
- 11:03 Changeset [13456] by
- Changed CALIBRATION service to SI units.
- 10:54 Changeset [13455] by
- Make sure that the same time is distributed with the voltage and current service; send a flag which tells if the nominal and current values are identical as QoS
- 10:52 Changeset [13454] by
- Fixed a typo
- 10:51 Changeset [13453] by
- Receive nominal bias voltage; added an option to set the calibration offset; the calibration offset is now relative only to the nominal G-APD breakdown voltage rather than the temperature corrected one; from the calibration current a slope (calibration resistor) is caluclated and distributed via dim service; the calibration resistor is taken into account when calculating the current feedback value.
- 10:33 Changeset [13452] by
- Reinserted the unused code parts in CalFitsPerformanceWeave for better comparison of the Weave and numpy approaches.
- 10:28 Changeset [13451] by
- New comments [all], cleaned up unused code parts [CalFitsPerformanceWeave].
04/25/12:
- 18:57 Changeset [13450] by
- ready for testing
- 15:54 Changeset [13449] by
- ready to be tested
- 15:53 Changeset [13448] by
- Newest performance test script files for the CalFits class, including a fast version using scipy.weave.
- 14:48 Changeset [13447] by
- is writing pulse heights to npz
- 14:46 Changeset [13446] by
- plots each pixels darkcount pulse height histogram
- 14:40 Changeset [13445] by
- simple test
- 08:55 Changeset [13444] by
- ...evolving...
- 08:54 Changeset [13443] by
- ...evolving...
- 07:51 Changeset [13442] by
- ...evolving...
- 07:50 Changeset [13441] by
- init of class RawDataFake ... not yet functional
04/24/12:
- 16:53 Changeset [13440] by
- init
- 16:52 Changeset [13439] by
- further steps
- 14:46 Changeset [13438] by
- corrections
- 14:41 Changeset [13437] by
- added comments
- 14:41 Changeset [13436] by
- added comments
- 14:41 Changeset [13435] by
- Changed CalFitsTest.py to work with the current version of caltest.h.
- 14:40 Changeset [13434] by
- added Comments
- 14:39 Changeset [13433] by
- added comments
- 14:37 Changeset [13432] by
- deleted WriteAllPixelTemplateToCSV
- 14:37 Changeset [13431] by
- deleted WriteAllPixelTemplateToCSV
- 14:34 Changeset [13430] by
- Added script CalFitsPerformance.py to test the speed when actually working with the read data.
- 14:10 Changeset [13429] by
- rearengements
- 14:08 Changeset [13428] by
- added fit
- 14:07 Changeset [13427] by
- add fit function
- 13:57 Changeset [13426] by
- Use arrays with dynamic memory instead of vectors.
- 11:59 Changeset [13425] by
- code cleaning
- 11:02 Changeset [13424] by
- added function findTimeOfHalfMaxLeft
- 11:00 Changeset [13423] by
- added slopeOfRisingEdge and halfRisingEdgePos
- 08:22 Changeset [13422] by
- now with median, mean and max of slice
- 05:56 Changeset [13421] by
- init
04/23/12:
- 19:18 Changeset [13420] by
- new class Signal Generator CSV
- 19:18 Changeset [13419] by
- PulseTemplate
- 19:17 Changeset [13418] by
- PulseTemplate
- 19:17 Changeset [13417] by
- PulseTemplate
- 14:15 Changeset [13416] by
- Pointer version of the CalFits class (faster data access).
- 13:28 Changeset [13415] by
- exchanged naming of cols, such that it fits to the way TB does it.
- 13:26 Changeset [13414] by
- ready
- 11:56 Changeset [13413] by
- moved more stuff from tools/ to sandbox/dneise
- 11:55 Changeset [13412] by
- 3rd part of move
- 11:55 Changeset [13411] by
- 2nd part of move
- 11:54 Changeset [13410] by
- moved some stuff from tools to sandbox/dneise ... was not really a tool
- 09:56 Changeset [13409] by
- python script added to plot the trigger rates of one night
04/21/12:
- 09:38 Changeset [13408] by
- ignores data link
- 09:32 Changeset [13407] by
- added some comments
- 09:26 Changeset [13406] by
- nothing special
- 09:25 Changeset [13405] by
- initial commit
- 09:25 Changeset [13404] by
- testing version
- 09:23 Changeset [13403] by
- initial commit
- 09:22 Changeset [13402] by
- coordinator has now the x,y coordinates as members x and y
04/20/12:
- 14:42 Changeset [13401] by
- Commented the loop over all events in CalFitsTest.py.
- 14:41 Changeset [13400] by
- Completed the fast implementation to read calibrated data: calfits.h, CalFitsTest.py.
- 13:28 Changeset [13399] by
- added (scripts and setup for MC processing)
- 12:19 Changeset [13398] by
- Update the statistics box with fit information if a gauss fit is done.
- 11:58 Changeset [13397] by
- Test function for the CalFits class.
- 11:47 Changeset [13396] by
- [In development] Wrapper class for fits.h or pyfits.h Provides fast access to calibrated events of FACT raw data.
- 11:20 Changeset [13395] by
- quick hack
- 11:17 Changeset [13394] by
- test von qw
- 11:04 Changeset [13393] by
- Implemented the possibility to fit the projection per default with a gaussian.
04/19/12:
- 15:26 Changeset [13392] by
- for comparison
- 11:28 Changeset [13391] by
- using map.txt instead of map_dn.txt ... added a lot of comments
- 11:27 Changeset [13390] by
- the same as map_dn.txt but contains only those 3 cols I really use
- 11:23 Changeset [13389] by
- example for root 5.32 on ISDC added
- 09:54 Changeset [13388] by
- Added a possibility to also filla ratio; removed obsolete DrawClone; removed DrawCopy
- 09:53 Changeset [13387] by
- Added fIsRatio; propagate weights; added a possibility to also fill a ratio into a camera histogram.
04/18/12:
- 21:13 Changeset [13386] by
- initial
- 21:12 Changeset [13385] by
- initial
- 21:03 Changeset [13384] by
- DRS amplitude cal optimized. At least I don't see more potential
- 20:36 Changeset [13383] by
- just a test
- 20:00 Changeset [13382] by
- optimizing amplitude_calibration: no np.roll() and moved reshaping to __init__
- 18:15 Changeset [13381] by
- updated to new format of BIAS_CONTROL_VOLTAGE.fits
- 17:07 Changeset [13380] by
- new option in RawData.__init__() one can set do_calibration=False. and the amplitude calibration comes without np.roll() ... thx to TPK for the idea
- 12:08 Changeset [13379] by
- Added decoding for FACT.
- 10:56 Changeset [13378] by
- now one can plot different pulse orders
- 09:28 Changeset [13377] by
- edited typo
- 09:26 Changeset [13376] by
- added some examples, and changed the part about the env vars
- 09:19 Changeset [13375] by
- debugged typo in _test_iter
- 09:17 Changeset [13374] by
- adjusted _test_iter for dict return value of RawData.next()
04/17/12:
- 23:19 Changeset [13373] by
- additional output
- 22:57 Changeset [13372] by
- Operator: check events tab during first drs calib
- 22:51 Changeset [13371] by
- edited comment output
- 22:47 Changeset [13370] by
- tidied up by using additional scripts
- 22:47 Changeset [13369] by
- tidied up by using additional scripts
- 17:16 Changeset [13368] by
- initial commit of my sandbox
- 17:14 Changeset [13367] by
- ZeroXing supports also Xings at different levels, so one can set the zero-level to another level
- 15:53 Changeset [13366] by
- According to the root docu some GetRoot() calls should be GetDefaultRoot()
- 14:57 Changeset [13365] by
- Added two more modes.
- 14:51 Changeset [13364] by
- Implemented the possibility to start an eventloop in a step-by-step mode which stops at each event which is not flagged with kCONTINUE.
- 11:50 Changeset [13363] by
- fixed column names
- 11:47 Changeset [13362] by
- added link to logbook in comments column
- 09:54 Changeset [13361] by
- 09:44 Changeset [13360] by
- svn ignore _build folder
- 09:39 Changeset [13359] by
- deleted _build folder
- 09:18 Changeset [13358] by
- just some tests for file random walk ... just for me... DN
- 09:17 Changeset [13357] by
- deleted testfile: pynew.py
- 09:16 Changeset [13356] by
- new class RawDataFeeder initial commit
- 09:13 Changeset [13355] by
- supports table columns type 'A'
- 09:05 Changeset [13354] by
- initial commit of new python wrapper class. usable for reading of slow data files
- 09:04 Changeset [13353] by
- added debug output
04/16/12:
- 16:15 Changeset [13352] by
- edited comments
- 16:14 Changeset [13351] by
- edited comments
- 16:12 Changeset [13350] by
- additional mini script to for tracking crab and to tidy up the data taking scripts
- 14:29 Changeset [13349] by
- switched to the 0new commenting method
- 13:49 Changeset [13348] by
- switched to new commenting commands
- 13:48 Changeset [13347] by
- switched to new commenting commands
- 13:48 Changeset [13346] by
- switched to new commenting commands
- 13:47 Changeset [13345] by
- switched to new commenting commands
- 13:47 Changeset [13344] by
- switched to new commenting commands
- 12:49 Changeset [13343] by
- fixed bug
- 12:47 Changeset [13342] by
- improved logging
- 12:43 Changeset [13341] by
- fixed bug for tooltip mode
04/12/12:
- 20:06 Changeset [13340] by
- Fixed a typo in a log text.
- 20:05 Changeset [13339] by
- Updated to v19r31
- 11:46 Changeset [13338] by
- ignoreing *.d and __pycache__ folder
- 11:45 Changeset [13337] by
- ignoring _build/html and _build/doctrees
- 11:41 Changeset [13336] by
- example for the new features of pyfits.h
- 11:27 Changeset [13335] by
- forgot headline ... debugged
- 11:25 Changeset [13334] by
- included extractor.py into classes.rst
- 11:22 Changeset [13333] by
- supports automodule
- 10:23 Changeset [13332] by
- inserted getters for fits header information
04/11/12:
- 08:58 Changeset [13331] by
- added first unit test of fir_filter module - use py.test to conduct it
- 08:55 Changeset [13330] by
- debugged filter artifacts in the first few slices, by hand.... ugly but works
04/07/12:
- 10:15 Changeset [13329] by
- added automodule support
- 10:13 Changeset [13328] by
- added automodule support
- 10:12 Changeset [13327] by
- added doc strings
- 10:11 Changeset [13326] by
- added more autoclass statements and one automodule statement
- 10:10 Changeset [13325] by
- removed doubled classes content and added some examples
Note:
See TracTimeline
for information about the timeline view.
