Timeline
05/14/12:
- 16:51 Changeset [13730] by
- modified script by using service scripts for data taking and drscalibration
- 16:51 Changeset [13729] by
- modified script by using service scripts for data taking and drscalibration
- 16:49 Changeset [13728] by
- initial commit: take a external light Pulser run
- 16:49 Changeset [13727] by
- initial commit: take a DRS calibration before taking physics data
- 16:48 Changeset [13726] by
- whitespace changes and comments
- 16:44 Changeset [13725] by
- initial commit: Take 1x pedestal, 1x ExtLp and 4x physics data runs
- 16:43 Changeset [13724] by
- initial commit: ramp up bias before data taking
- 16:42 Changeset [13723] by
- initial commit: take a pedestal run 1000 evts and bias on
- 15:54 Changeset [13722] by
- Cancel request which are still pending when requestAll* is called.
- 14:59 Changeset [13721] by
- Added a warning in case the temperatures are all invalid.
- 14:58 Changeset [13720] by
- add line for making scritpts executable and renamed all scripts to *.dim
- 14:54 Changeset [13719] by
- add line for making scritpts executable and renamed all scripts to *.dim
- 14:39 Changeset [13718] by
- Implemented blocking which makes sure that if only a single channel's threshold is set it is not set twice without break. Due to a firmware bug the FTU would stop counting otherwise and we always get the same rate.
- 14:37 Changeset [13717] by
- When fDimDeviation is reset, it must be set to fOffset so that the sum is correctly 0.
- 14:32 Changeset [13716] by
- Improved relating the rows in the table with the lines in the file.
- 13:44 Changeset [13715] by
- Removed the check for the line being a comment, this is done in Readline.cc now
- 13:43 Changeset [13714] by
- Added comment to help list.
- 13:41 Changeset [13713] by
- Added Uncomment function to tools used to strip off inline comments.
- 13:01 Changeset [13712] by
- Added more command descriptions.
- 12:54 Changeset [13711] by
- Fixed a typo in a help text thanks to Dominik; added missing state descriptions
- 12:31 Changeset [13710] by
- renamed a Script
- 11:26 Changeset [13709] by
- added some comments
- 10:38 Changeset [13708] by
- Initial commit of FeedBackOn Dim Script: Contains the same StartUp procedure as FirstDrsCalib, but without the data taking
- 09:28 Changeset [13707] by
- just changed some logging output, two short '-' lines instead of a long one
- 09:27 Changeset [13706] by
- just changed some logging output, two short '-' lines instead of a long one
- 09:27 Changeset [13705] by
- edited verbosity output
05/13/12:
- 22:40 Changeset [13704] by
- A fix for the color of the bias information; added colors to the current page; implemented fad connection stuff
- 22:38 Changeset [13703] by
- Added the possibility to fix width and height; added the possibility to replace a line by an image; fixed the link to dummy.png
- 15:38 Changeset [13702] by
- Slight change to the meaning of labels; added the direct exit to th eexecution loop; implemented interruption of state waiting
- 15:25 Changeset [13701] by
- Improved the status line.
- 15:25 Changeset [13700] by
- 14:29 Changeset [13699] by
- Added path option (not yet activated); added path to output files; some updates to coloring and output especially for the current display and whether they are calibrated or not; added thresholds
- 14:28 Changeset [13698] by
- Moved data files to data and moved table files to struct
- 14:27 Changeset [13697] by
- Moved images to img
- 14:23 Changeset [13696] by
- 14:23 Changeset [13695] by
- 14:22 Changeset [13694] by
- 12:08 Changeset [13693] by
- Added handling of feedback deviation.
- 11:59 Changeset [13692] by
- Allow deviation to be two bytes larger.
- 11:58 Changeset [13691] by
- Added temperature and user offset to deviation service.
- 11:35 Changeset [13690] by
- 11:35 Changeset [13689] by
- 11:33 Changeset [13688] by
- 11:30 Changeset [13687] by
- Implemented a mark for an attached comment, display comment in tooltip.
- 09:52 Changeset [13686] by
- 09:52 Changeset [13685] by
- 09:47 Changeset [13684] by
- Enabled authentication; removed default label from filename.
- 09:46 Changeset [13683] by
- Set a fixed precision for the units of the camera display
05/12/12:
- 21:45 Changeset [13682] by
- Fixed a newly introduced bug when parsing the .x - opt should have been checked, not data.
- 18:44 Changeset [13681] by
- Some little improvements and fixes
- 18:43 Changeset [13680] by
- Added authetication stuff
- 18:42 Changeset [13679] by
- Added icon_color; commented out some obsolete stuff
- 18:42 Changeset [13678] by
- Some simplication and layout changes; added support for input rows and the possibility to submit script for telescope control.
- 18:16 Changeset [13677] by
- Added the state of DIM_CONTROL
- 18:06 Changeset [13676] by
- Added JavaDate
- 18:05 Changeset [13675] by
- Use JavaData; ceck overcurrent status; someother cosetic changes and improvements
- 12:44 Changeset [13674] by
- It seems there is another thing not handled very well by dim if a server crashes; removed the exception and added proper handling of that case.
- 12:43 Changeset [13673] by
- Added the possibility to pipe arguments to the executed scripts.
- 12:42 Changeset [13672] by
- Redirect the exit handler; removed obsolete fLabel; added new class for a unattended dimctrl server RemoteStream
- 12:41 Changeset [13671] by
- Added the possibility to remote control the DIM_CONTROL, i.e. start and stop scripts
- 12:37 Changeset [13670] by
- If a Format string is empty this is just a warning.
- 12:36 Changeset [13669] by
- Added GetWildcardOptions and GetOptions to be able to access all available wildcard options of one kind at once; replaced some iterator defintions with the auto keyword for conevenience
- 12:35 Changeset [13668] by
- Added a hint for the command line arguments to the explanation of .x; added argument-replacement to Execute; set section label to -2 if script done and to 0 if script is executing; added argument parsing to .x
- 12:29 Changeset [13667] by
- Added a split function able to parse an escaped command line
- 00:07 Changeset [13666] by
- Added first draft of an interfact to the dimctrl.
- 00:05 Changeset [13665] by
- Added sendCommand; fixed a problem with the debug line.
- 00:03 Changeset [13664] by
- Many simplifications; invalidation of graphics if report is too late; limits from binary file; no double use of xmlHttp; removed old obsolete sliding code
05/11/12:
- 23:21 Changeset [13663] by
- changed OpenRootFile? to ChooseRootFileToWrite
- 23:18 Changeset [13662] by
- add pulsetemplate program
- 23:17 Changeset [13661] by
- const char* to TString
- 23:16 Changeset [13660] by
- changed OpenRootFile to OpenRootFile
- 23:14 Changeset [13659] by
- add functions make histogramsPritty
- 23:14 Changeset [13658] by
- add functions make histogramsPritty
- 23:12 Changeset [13657] by
- const char* to TString
- 23:10 Changeset [13656] by
- renaming of variables
- 23:09 Changeset [13655] by
- 23:09 Changeset [13654] by
- changed to the correct constructor of parrent class
- 23:08 Changeset [13653] by
- renaming of functions
- 23:05 Changeset [13652] by
- initial commit: functions for extracting information from TH2 and putting into TH1 to compute a Pulse Template
- 21:15 Changeset [13651] by
- Added a virtual function to be used in RemoteControl to get back to DimCtrl.
- 19:54 Changeset [13650] by
- Instead of calling shell.Stop(), simply shell.Run() is not called if option 'quit' is given.
- 19:53 Changeset [13649] by
- Made fLabel static to allow it being set rom dimctrl; added a virtual function to signal the current label.
- 16:36 Changeset [13648] by
- initial commit: class vor information of a bunch of pixels connected
- 14:15 Changeset [13647] by
- Added a getter for fStep.
- 10:57 Changeset [13646] by
- add constuctor for pixel without ID but name
- 10:57 Changeset [13645] by
- add constuctor for pixel without ID but name
- 06:49 Changeset [13644] by
- RawData.board_times and RawData.start_cells are now numpy array. They were of type ROOT.PyShortBuffer before, which is not so easy to handle. Since it is not time critical, I decided to create them this way. RawData.info() is not giving a sufficient amount of info, I think. should be reworked. A RawData object has several member, which make no sense in all cases. E.g. some members related to the baseline correction. These members should only exist, in case the user wants to perform baseline correction.
05/10/12:
- 17:18 Changeset [13643] by
- Some little improvements to statistics and display; new scale for the currents
- 17:17 Changeset [13642] by
- Another update to the resizing; a fix to the debug line display.
- 16:44 Changeset [13641] by
- All funktions implemented to compute template
- 15:04 Changeset [13640] by
- Added some debug output.
- 13:36 Changeset [13639] by
- removed and exchanged with templateextractors.*
- 13:32 Changeset [13638] by
- initial commit: functions for extracting information from TH2 and putting into TH1 to compute a Pulse Template
- 13:30 Changeset [13637] by
- initial commit: functions for extracting information from TH2 and putting into TH1 to compute a Pulse Template
- 13:29 Changeset [13636] by
- added function CsvFileName
- 13:29 Changeset [13635] by
- added function CsvFileName
- 11:43 Changeset [13634] by
- added comments
- 11:42 Changeset [13633] by
- just a note
- 11:41 Changeset [13632] by
- initial commit of my tests and so on
- 11:33 Changeset [13631] by
- removed new class DRSSpikes_2D ... not needed
- 08:44 Changeset [13630] by
- return_dict=True is now default
05/09/12:
- 22:00 Changeset [13629] by
- counting in for loop cout to correct max value of pixels
- 17:49 Changeset [13628] by
- const char* to TString
- 17:48 Changeset [13627] by
- const char* to TString
- 17:48 Changeset [13626] by
- bugfixes Seg faults solved in Save Histogram
- 17:46 Changeset [13625] by
- changed all const char to TString
- 17:46 Changeset [13624] by
- whitespace
- 16:39 Changeset [13623] by
- This seems to make the compiler more happy.
- 16:22 Changeset [13622] by
- Fixeda few 'compiler' warnings.
- 16:17 Changeset [13621] by
- Added rate scan stuff and fixed mappings and other details.
- 16:16 Changeset [13620] by
- Added correct pixel mapping and a few othe rminor improvements
- 14:19 Changeset [13619] by
- The factor to determine the wind direction is 22.5 not 22
- 14:08 Changeset [13618] by
- added delete for file-object
- 14:08 Changeset [13617] by
- added delete for file-object
- 13:37 Changeset [13616] by
- changed bsl and gain to type float
- 13:34 Changeset [13615] by
- change bsl and gain to type float
- 13:01 Changeset [13614] by
- add removeRegionWithToFlatSlope
- 13:01 Changeset [13613] by
- removeRegionWithToFlatSlope
- 12:54 Changeset [13612] by
- add float interceptRisingEdge;
- 12:53 Changeset [13611] by
- now it saves into the correct subdirectory
- 12:52 Changeset [13610] by
- debugHistos optimized
- 00:38 Changeset [13609] by
- Fixed the display of the camera display; fixed the display of the MCP/CONFIGURATIOn service and added a time counter for started runs.
- 00:37 Changeset [13608] by
- Removed a stray empty line.
- 00:36 Changeset [13607] by
- Implemented colors for the new mcp states.
- 00:31 Changeset [13606] by
- The service name didn't icnlude the server name as it ought to be.
05/08/12:
- 22:10 Changeset [13605] by
- In the new states the check should be fStatusFAD not fStatusFTM
- 17:42 Changeset [13604] by
- histograms for template computation from edge overlay
- 17:42 Changeset [13603] by
- histograms for template computation from edge overlay
- 17:41 Changeset [13602] by
- line that could be uncommented to also save debug histos
- 13:45 Changeset [13601] by
- changed time range for raw files on LP from 3 to 9 days
- 13:41 Changeset [13600] by
- changed time range for rsync of raw files on LP from 3 to 9 days
- 13:40 Changeset [13599] by
- changed time range for rsync of aux files from 3 to 9 days
- 13:17 Changeset [13598] by
- resolved segmentation fold on producing test histograms
- 11:51 Changeset [13597] by
- DrawHistograms changed to DrawOverlayHistograms, added function for drawing template histograms
- 11:51 Changeset [13596] by
- DrawHistograms changed to DrawOverlayHistograms, added function for drawing template histograms
- 11:49 Changeset [13595] by
- DrawHistograms changed to DrawOverlayHistograms
- 11:37 Changeset [13594] by
- added functions for handling histograms for template computation
- 11:36 Changeset [13593] by
- added functions for handling histograms for template computation
- 10:56 Changeset [13592] by
- second constructor fpr loading allready produced histos, also took away standard values couse they did not work for overloading
- 10:56 Changeset [13591] by
- second constructor fpr loading allready produced histos, also took away standard values couse they did not work for overloading
- 09:54 Changeset [13590] by
- new Method for computing histogram names
05/07/12:
- 20:45 Changeset [13589] by
- Improved that acces s to the states; added many new services.
- 20:45 Changeset [13588] by
- Added icons.
- 20:45 Changeset [13587] by
- Improvements to the histogram display; some other little fixes and improvements
- 17:47 Changeset [13586] by
- correct HEADAS path, paths for running FillAuxData.sh at ISDC
- 13:35 Changeset [13585] by
- Added two new states: trigger on and taking data
- 11:45 Changeset [13584] by
- changed distribution histograms from TH1F to TH1I
- 11:44 Changeset [13583] by
- title changes of distribution histograms and changed them from TH1F to TH1I
- 11:43 Changeset [13582] by
- bugfix in lin. regression of rising edge
- 11:40 Changeset [13581] by
- added check showing pulses where slope of rising edge was calculated to be negative
- 10:42 Changeset [13580] by
- run skript only for last three days or last X GB of data
- 10:39 Changeset [13579] by
- added check for empty return of mysql
- 10:39 Changeset [13578] by
- added check if directory is mounted
- 09:52 Changeset [13577] by
- small bugfix
- 09:51 Changeset [13576] by
- small bugfix of unknownvariable _tf_
- 09:35 Changeset [13575] by
- dded filling and drawing of distribution histograms
- 09:34 Changeset [13574] by
- added calculation of distance of half rising edge to maximum
- 09:33 Changeset [13573] by
- added value for the distance of maximum und half rising edge
- 09:26 Changeset [13572] by
- changed distibution options from P to M
05/06/12:
- 00:19 Changeset [13571] by
- Added description to the new service.
05/05/12:
- 23:58 Changeset [13570] by
- Added a service to distribute the current run-type information.
- 19:27 Changeset [13569] by
- 19:26 Changeset [13568] by
- Many more changes and improvements; mainly made everything dynamic so that more fancy menus are possible; added back and home button.
05/04/12:
- 23:53 Changeset [13567] by
- More simplifications and optimizations
- 21:51 Changeset [13566] by
- debugged memory allocation bug. mem of trigger_offset was allocated too small. baseline, gain and trigger_offset were filled in the wrong way in the contructor. in GetCalEvent() baseline, gain and trigger_offset were indexed wrongly. performance test to be done.
- 21:16 Changeset [13565] by
- Even more updates to the camera drawing
- 20:54 Changeset [13564] by
- More updates to the camera drawing
- 19:53 Changeset [13563] by
- Fixed a problem with firefox; added drawing of the full camera; use translations for drawing; replaced discs by hexagons
- 19:52 Changeset [13562] by
- Removed event counter - there is only one event per second anyway; implemented different scaling depending on whether the event is calibrated or not
- 19:41 Changeset [13561] by
- Send the drs step as quality with the data so that it can be detected if it is calibrated data or not.
- 16:28 Changeset [13560] by
- use_this_peak
- 16:28 Changeset [13559] by
- changed naming of histograms
- 16:27 Changeset [13558] by
- now histograms will be plotted again
- 10:40 Changeset [13557] by
- Fixed another sign - so we are back with the previous solution.
- 10:34 Changeset [13556] by
- The voltage U0 had the wrong sign.
05/03/12:
- 22:58 Changeset [13555] by
- Added the missing color for the source name in the tracking tab.
- 22:51 Changeset [13554] by
- Added an error output if we still miss a connection to a subsystem and somebody tries to start a run.
- 22:51 Changeset [13553] by
- Fixed a unit problem in the new rasistor correction; added some output which helps in case of problems; correctly display the calibration offset when the calibration is started.
- 22:46 Changeset [13552] by
- Some fixes, updates and improvements to get a first version fully working.
- 22:36 Changeset [13551] by
- removed some multiplications from GetCalEvent() to Constructor ... not yet tested
- 22:34 Changeset [13550] by
- compiling with optimize
- 18:54 Changeset [13549] by
- Commented out the use of fStatic, because with the called default constructor it led to crahes.
- 13:49 Changeset [13548] by
- deleted fits* datafile
- 13:48 Changeset [13547] by
- deleted Pixel** pixel
- 13:29 Changeset [13546] by
- set datafile to NULLpointer
- 13:28 Changeset [13545] by
- added deletion of datafile at the end of programm
- 13:19 Changeset [13544] by
- un uncommented deletion of distribution histos in destructor
- 13:16 Changeset [13543] by
- un uncommented histogram deletion in destructor
- 13:12 Changeset [13542] by
- verbosity cout changes
- 13:11 Changeset [13541] by
- verbosity cout changes
- 12:47 Changeset [13540] by
- un-uncommented Fill Histograms and removed some debugging couts
- 12:38 Changeset [13539] by
- deleted useless cout
- 11:55 Changeset [13538] by
- bugfix: pixelID in new Pixel
- 11:51 Changeset [13537] by
- added Loading of libz.so for isdc machines
- 11:50 Changeset [13536] by
- added dependency for binary
- 10:39 Changeset [13535] by
- Makefile works
- 09:01 Changeset [13534] by
- added a lot of includes
- 08:59 Changeset [13533] by
- hanged verbosity levels
- 08:39 Changeset [13532] by
- deleted IsReadyForDataTaking --> moved to ServiceScripts
- 06:02 Changeset [13531] by
- changed path to so lib
- 06:01 Changeset [13530] by
- changed default filename and added check if file exists
05/02/12:
- 22:58 Changeset [13529] by
- Removed debug status in output file.
- 22:57 Changeset [13528] by
- Added missing infoHandlers for drive control.
- 22:41 Changeset [13527] by
- Fixed a typo in an element name
- 22:01 Changeset [13526] by
- Added cycling color of dots; moved some code to isSliding; new simplified sliding algorithm; simplified doresize
- 22:00 Changeset [13525] by
- Switched off padding for rows.
- 21:59 Changeset [13524] by
- Included rdot and ldot and removed the default time.
- 21:16 Changeset [13523] by
- A little simplification.
- 17:26 Changeset [13522] by
- now with correct filenames
- 17:24 Changeset [13521] by
- makefile for FPulseOverlay.C
- 17:23 Changeset [13520] by
- update some bugfixes in the destructor
- 17:22 Changeset [13519] by
- result for today NOT WORKING but i commit annyways
- 15:56 Changeset [13518] by
- RawData uses CalFactFits as default, see __init__() parameter use_CalFactFits
- 15:12 Changeset [13517] by
- reverted former check in ... was too messy ... sorry
- 15:05 Changeset [13516] by
- test of RawData using CalFactFits
- 14:37 Changeset [13515] by
- Renamed test scripts and Class calls within to new naming standard.
- 14:32 Changeset [13514] by
- Renamed the header guards in calfactfits.h to CALFACTFITS_H.
- 14:11 Changeset [13513] by
- debugged _test_SlowData
- 13:39 Changeset [13512] by
- using now class FactFits instead of class fits
- 13:33 Changeset [13511] by
- file deleted, class is now called SlowData in module pyfact
- 13:30 Changeset [13510] by
- renamed class fits to FactFits
- 13:30 Changeset [13509] by
- renamed to factfits.h
- 13:29 Changeset [13508] by
- deleted
- 13:28 Changeset [13507] by
- renamed class
- 13:23 Changeset [13506] by
- creating shared object files from C++ header files
- 12:53 Changeset [13505] by
- added class SlowData. This class was formerly known as FactFits in module factfits.py
- 12:39 Changeset [13504] by
- adding deprication warning
- 11:19 Changeset [13503] by
- Part 2 of the file moving, comments see last commit.
- 11:17 Changeset [13502] by
- Moved calfits.h to pyfact and the example scripts to examples. P.S. The examples might not work currently du to wrong paths. P.P.S. the files and classes will be renamed soon by DN.
05/01/12:
- 15:45 Changeset [13501] by
- took of unused cout
- 15:34 Changeset [13500] by
- some major bugfixes
- 15:34 Changeset [13499] by
- some major bugfixes
- 15:01 Changeset [13498] by
- Added rates from ftm control.
- 14:27 Changeset [13497] by
- Added current calibration; some updates to the colors
- 14:10 Changeset [13496] by
- Added simple graph drawing.
- 13:18 Changeset [13495] by
- Removed some warning given by the Closure Compiler; exported onload
- 12:42 Changeset [13494] by
- added bool for saving histograms or not
- 12:42 Changeset [13493] by
- added bool for saving histograms or not
- 12:42 Changeset [13492] by
- added bool for saving histograms or not
- 12:41 Changeset [13491] by
- added bool for saving histograms or not
- 12:41 Changeset [13490] by
- added bool for saving histograms or not
- 12:25 Changeset [13489] by
- destructor for DistributionHistos
- 12:25 Changeset [13488] by
- destructor for DistributionHistos
- 12:15 Changeset [13487] by
- modified the destructor for array usage
- 12:10 Changeset [13486] by
- additional if conditions for debug histos
- 12:02 Changeset [13485] by
- put construction of debug histograms into an own function
- 10:19 Changeset [13484] by
- Moved all dim service description outside the class, so that they can be instantiated after the initialisation, to ensure that everything is properly initialized before the infoHandler is called.
04/30/12:
- 22:57 Changeset [13483] by
- Added BIAS_CONTROL/VOLTAGE
- 22:53 Changeset [13482] by
- The calibration offset must be subtracted from the voltage to calculate the resistor.
- 22:48 Changeset [13481] by
- Reverting to last revision.
- 22:48 Changeset [13480] by
- Reverting to last revision.
- 22:47 Changeset [13479] by
- Adapted to the latest html/js changes.
- 22:32 Changeset [13478] by
- Include DimData; removed class definition for DimData; updated calculation of bias current offset; added subscription to BIAS_CONTROL/VOLTAGE; removed the group-wise scaling in the display of the bias currents for the time being.
- 20:07 Changeset [13477] by
- Moved the instantisation of fTriggerOn before the DimStampedInfo instances.
- 19:24 Changeset [13476] by
- bugfixes after first compilation
- 19:23 Changeset [13475] by
- bugfixes after first compilation
- 19:23 Changeset [13474] by
- bugfixes after first compilation
- 19:22 Changeset [13473] by
- bugfixes after first compilation
- 19:22 Changeset [13472] by
- Bugfixes after first compilation
- 19:21 Changeset [13471] by
- added initialisation of parameter slopeOfRisingEdge
- 14:23 Changeset [13470] by
- Many updates.
- 05:48 Changeset [13469] by
- ignore root files
- 05:47 Changeset [13468] by
- init
04/27/12:
- 18:34 Changeset [13467] by
- budfix lost } added
- 18:30 Changeset [13466] by
- comments added
- 18:25 Changeset [13465] by
- initial commit
- 12:38 Changeset [13464] by
- SmartFACT++ web-pages -- first draft.
- 12:30 Changeset [13463] by
- A very simple and light weight wrapper around DimInfo
- 12:29 Changeset [13462] by
- First version of a dim client writing input for the SmartFACT++ web-page.
04/26/12:
- 14:24 Changeset [13461] by
- Added passing NROI and NPIX to weave.
- 11:47 Changeset [13460] by
- evolving
- 11:45 Changeset [13459] by
- init
- 11:43 Changeset [13458] by
- ...testing...
- 11:05 Changeset [13457] by
- Corrected the CURRENT service description.
- 11:03 Changeset [13456] by
- Changed CALIBRATION service to SI units.
- 10:54 Changeset [13455] by
- Make sure that the same time is distributed with the voltage and current service; send a flag which tells if the nominal and current values are identical as QoS
- 10:52 Changeset [13454] by
- Fixed a typo
- 10:51 Changeset [13453] by
- Receive nominal bias voltage; added an option to set the calibration offset; the calibration offset is now relative only to the nominal G-APD breakdown voltage rather than the temperature corrected one; from the calibration current a slope (calibration resistor) is caluclated and distributed via dim service; the calibration resistor is taken into account when calculating the current feedback value.
- 10:33 Changeset [13452] by
- Reinserted the unused code parts in CalFitsPerformanceWeave for better comparison of the Weave and numpy approaches.
- 10:28 Changeset [13451] by
- New comments [all], cleaned up unused code parts [CalFitsPerformanceWeave].
04/25/12:
- 18:57 Changeset [13450] by
- ready for testing
- 15:54 Changeset [13449] by
- ready to be tested
- 15:53 Changeset [13448] by
- Newest performance test script files for the CalFits class, including a fast version using scipy.weave.
- 14:48 Changeset [13447] by
- is writing pulse heights to npz
- 14:46 Changeset [13446] by
- plots each pixels darkcount pulse height histogram
- 14:40 Changeset [13445] by
- simple test
- 08:55 Changeset [13444] by
- ...evolving...
- 08:54 Changeset [13443] by
- ...evolving...
- 07:51 Changeset [13442] by
- ...evolving...
- 07:50 Changeset [13441] by
- init of class RawDataFake ... not yet functional
04/24/12:
- 16:53 Changeset [13440] by
- init
- 16:52 Changeset [13439] by
- further steps
- 14:46 Changeset [13438] by
- corrections
- 14:41 Changeset [13437] by
- added comments
- 14:41 Changeset [13436] by
- added comments
- 14:41 Changeset [13435] by
- Changed CalFitsTest.py to work with the current version of caltest.h.
- 14:40 Changeset [13434] by
- added Comments
- 14:39 Changeset [13433] by
- added comments
- 14:37 Changeset [13432] by
- deleted WriteAllPixelTemplateToCSV
- 14:37 Changeset [13431] by
- deleted WriteAllPixelTemplateToCSV
- 14:34 Changeset [13430] by
- Added script CalFitsPerformance.py to test the speed when actually working with the read data.
- 14:10 Changeset [13429] by
- rearengements
- 14:08 Changeset [13428] by
- added fit
- 14:07 Changeset [13427] by
- add fit function
- 13:57 Changeset [13426] by
- Use arrays with dynamic memory instead of vectors.
- 11:59 Changeset [13425] by
- code cleaning
- 11:02 Changeset [13424] by
- added function findTimeOfHalfMaxLeft
- 11:00 Changeset [13423] by
- added slopeOfRisingEdge and halfRisingEdgePos
- 08:22 Changeset [13422] by
- now with median, mean and max of slice
- 05:56 Changeset [13421] by
- init
04/23/12:
- 19:18 Changeset [13420] by
- new class Signal Generator CSV
- 19:18 Changeset [13419] by
- PulseTemplate
- 19:17 Changeset [13418] by
- PulseTemplate
- 19:17 Changeset [13417] by
- PulseTemplate
- 14:15 Changeset [13416] by
- Pointer version of the CalFits class (faster data access).
- 13:28 Changeset [13415] by
- exchanged naming of cols, such that it fits to the way TB does it.
- 13:26 Changeset [13414] by
- ready
- 11:56 Changeset [13413] by
- moved more stuff from tools/ to sandbox/dneise
- 11:55 Changeset [13412] by
- 3rd part of move
- 11:55 Changeset [13411] by
- 2nd part of move
- 11:54 Changeset [13410] by
- moved some stuff from tools to sandbox/dneise ... was not really a tool
- 09:56 Changeset [13409] by
- python script added to plot the trigger rates of one night
04/21/12:
- 09:38 Changeset [13408] by
- ignores data link
- 09:32 Changeset [13407] by
- added some comments
- 09:26 Changeset [13406] by
- nothing special
- 09:25 Changeset [13405] by
- initial commit
- 09:25 Changeset [13404] by
- testing version
- 09:23 Changeset [13403] by
- initial commit
- 09:22 Changeset [13402] by
- coordinator has now the x,y coordinates as members x and y
04/20/12:
- 14:42 Changeset [13401] by
- Commented the loop over all events in CalFitsTest.py.
- 14:41 Changeset [13400] by
- Completed the fast implementation to read calibrated data: calfits.h, CalFitsTest.py.
- 13:28 Changeset [13399] by
- added (scripts and setup for MC processing)
- 12:19 Changeset [13398] by
- Update the statistics box with fit information if a gauss fit is done.
- 11:58 Changeset [13397] by
- Test function for the CalFits class.
- 11:47 Changeset [13396] by
- [In development] Wrapper class for fits.h or pyfits.h Provides fast access to calibrated events of FACT raw data.
- 11:20 Changeset [13395] by
- quick hack
- 11:17 Changeset [13394] by
- test von qw
- 11:04 Changeset [13393] by
- Implemented the possibility to fit the projection per default with a gaussian.
04/19/12:
- 15:26 Changeset [13392] by
- for comparison
- 11:28 Changeset [13391] by
- using map.txt instead of map_dn.txt ... added a lot of comments
- 11:27 Changeset [13390] by
- the same as map_dn.txt but contains only those 3 cols I really use
- 11:23 Changeset [13389] by
- example for root 5.32 on ISDC added
- 09:54 Changeset [13388] by
- Added a possibility to also filla ratio; removed obsolete DrawClone; removed DrawCopy
- 09:53 Changeset [13387] by
- Added fIsRatio; propagate weights; added a possibility to also fill a ratio into a camera histogram.
04/18/12:
- 21:13 Changeset [13386] by
- initial
- 21:12 Changeset [13385] by
- initial
- 21:03 Changeset [13384] by
- DRS amplitude cal optimized. At least I don't see more potential
- 20:36 Changeset [13383] by
- just a test
- 20:00 Changeset [13382] by
- optimizing amplitude_calibration: no np.roll() and moved reshaping to __init__
- 18:15 Changeset [13381] by
- updated to new format of BIAS_CONTROL_VOLTAGE.fits
- 17:07 Changeset [13380] by
- new option in RawData.__init__() one can set do_calibration=False. and the amplitude calibration comes without np.roll() ... thx to TPK for the idea
- 12:08 Changeset [13379] by
- Added decoding for FACT.
- 10:56 Changeset [13378] by
- now one can plot different pulse orders
- 09:28 Changeset [13377] by
- edited typo
- 09:26 Changeset [13376] by
- added some examples, and changed the part about the env vars
- 09:19 Changeset [13375] by
- debugged typo in _test_iter
- 09:17 Changeset [13374] by
- adjusted _test_iter for dict return value of RawData.next()
04/17/12:
- 23:19 Changeset [13373] by
- additional output
- 22:57 Changeset [13372] by
- Operator: check events tab during first drs calib
- 22:51 Changeset [13371] by
- edited comment output
- 22:47 Changeset [13370] by
- tidied up by using additional scripts
- 22:47 Changeset [13369] by
- tidied up by using additional scripts
- 17:16 Changeset [13368] by
- initial commit of my sandbox
- 17:14 Changeset [13367] by
- ZeroXing supports also Xings at different levels, so one can set the zero-level to another level
- 15:53 Changeset [13366] by
- According to the root docu some GetRoot() calls should be GetDefaultRoot()
- 14:57 Changeset [13365] by
- Added two more modes.
- 14:51 Changeset [13364] by
- Implemented the possibility to start an eventloop in a step-by-step mode which stops at each event which is not flagged with kCONTINUE.
- 11:50 Changeset [13363] by
- fixed column names
- 11:47 Changeset [13362] by
- added link to logbook in comments column
- 09:54 Changeset [13361] by
- 09:44 Changeset [13360] by
- svn ignore _build folder
- 09:39 Changeset [13359] by
- deleted _build folder
- 09:18 Changeset [13358] by
- just some tests for file random walk ... just for me... DN
- 09:17 Changeset [13357] by
- deleted testfile: pynew.py
- 09:16 Changeset [13356] by
- new class RawDataFeeder initial commit
- 09:13 Changeset [13355] by
- supports table columns type 'A'
- 09:05 Changeset [13354] by
- initial commit of new python wrapper class. usable for reading of slow data files
- 09:04 Changeset [13353] by
- added debug output
04/16/12:
- 16:15 Changeset [13352] by
- edited comments
- 16:14 Changeset [13351] by
- edited comments
- 16:12 Changeset [13350] by
- additional mini script to for tracking crab and to tidy up the data taking scripts
- 14:29 Changeset [13349] by
- switched to the 0new commenting method
- 13:49 Changeset [13348] by
- switched to new commenting commands
- 13:48 Changeset [13347] by
- switched to new commenting commands
- 13:48 Changeset [13346] by
- switched to new commenting commands
- 13:47 Changeset [13345] by
- switched to new commenting commands
- 13:47 Changeset [13344] by
- switched to new commenting commands
- 12:49 Changeset [13343] by
- fixed bug
- 12:47 Changeset [13342] by
- improved logging
- 12:43 Changeset [13341] by
- fixed bug for tooltip mode
Note:
See TracTimeline
for information about the timeline view.
