Timeline
08/07/12:
- 23:12 Changeset [14325] by
- debugged a typo
- 22:22 Changeset [14324] by
- added AntiFloddingTimer
- 20:02 Changeset [14323] by
- Some security update to the escaping.
- 09:48 Changeset [14322] by
- Improved logging output.
- 09:47 Changeset [14321] by
- Added the kNoDelay option to ensure that packets are not split.
- 09:47 Changeset [14320] by
- Improved logging output.
- 09:46 Changeset [14319] by
- Improved logging output.
- 09:46 Changeset [14318] by
- Improved logging output.
- 06:12 Changeset [14317] by
- added RequestStatus, after Output on/off; output on/off was only allowed in Connected, but not in Voltage_On/_Off corrected that
08/06/12:
- 22:16 Changeset [14316] by
- step by step ... going to test it
- 21:08 Changeset [14315] by
- slowly evolving
- 11:57 Changeset [14314] by
- still tidying up
- 11:53 Changeset [14313] by
- trying to clean up
- 11:37 Changeset [14312] by
- The month is given in the range 0..11 not 1..12
- 10:06 Changeset [14311] by
- add disable all FTUs and Stop_Trigger
08/04/12:
- 11:13 Changeset [14310] by
- Fixed a problem with the visibility and current-predition if sources have their maximum at the same time.
- 10:54 Changeset [14309] by
- Calculate current curve only if source is visible above 75deg. Made checks consistent.
08/02/12:
- 16:12 Changeset [14308] by
- Added the distance to the sun... the sun's zd needs to be checked... it seems it is not correctly calculated below the horizon.
- 15:42 Changeset [14307] by
- Added sun angle.
- 13:22 Changeset [14306] by
- Fixed a performance issue with the calculation of the moon position, convert the light condition directly to currents, renamed the light-condition to current-prediction.
- 10:30 Changeset [14305] by
- Write binary file.
- 09:57 Changeset [14304] by
- Added missing include of glu-.h
- 09:57 Changeset [14303] by
- Removed double include at the first line and added missing include of glu.h
- 09:56 Changeset [14302] by
- Implemented light-condition.data and set an empty default for th database string.
- 02:26 Changeset [14301] by
- initial commit: do a software shutdown
- 02:25 Changeset [14300] by
- add a ping of the FTUs
08/01/12:
- 17:40 Changeset [14299] by
- just need to check in quickly
- 17:02 Changeset [14298] by
- initial commit: take a pedestal run with ROI 1024
- 17:01 Changeset [14297] by
- modified location of subscripts
- 16:59 Changeset [14296] by
- moved script to folder service scripts
- 16:55 Changeset [14295] by
- initial commit: reset crate after fad-loss or drs-underflow
- 16:54 Changeset [14294] by
- add waitstates to automaticaly wait the right time before reconnecting to a board
- 13:58 Changeset [14293] by
- changed HeadersFSC to HeadersAgilent
- 13:45 Changeset [14292] by
- initial commit
- 12:53 Changeset [14291] by
- initial commint
07/31/12:
- 22:45 Changeset [14290] by
- added scripts for 2344
07/27/12:
- 12:47 Changeset [14289] by
- remove auxillary LaTex files, cleanup
- 12:46 Changeset [14288] by
- final version of the FTM firmware docu
- 09:26 Changeset [14287] by
07/25/12:
- 17:22 Changeset [14286] by
- Updated to v19r37
07/24/12:
- 15:36 Changeset [14285] by
- put the drive system status check in to the separate script
- 15:36 Changeset [14284] by
- put the drive system status check in to the separate script
- 14:43 Changeset [14283] by
- deleted drive check and put it to separate file
- 14:41 Changeset [14282] by
- Initial commit: check if drive is tracking
- 11:02 Changeset [14281] by
- add SwitchOnBias.dim
07/21/12:
- 08:06 Changeset [14280] by
- first drfat of the manual
- 08:00 Changeset [14279] by
- first drfat of the manual
07/19/12:
- 15:33 Changeset [14278] by
- Added modified calibration procedure for FADctrl for new FAD-based stand-alone oscilloscope.
- 14:20 Changeset [14277] by
- Initial Commit: Recalculate gainfits for an allready calculated Amplitude/Integral Spectrum
07/18/12:
- 17:46 Changeset [14276] by
- initial commit: switch on feedback and bias
- 17:45 Changeset [14275] by
- LP_rate_test.dim .. for tonight
- 11:23 Changeset [14274] by
- shutter controller docs: adding description of the cabling
07/17/12:
- 17:25 Changeset [14273] by
- ShutterControlled, added tech details
- 13:17 Changeset [14272] by
- ShutterControlled, committing figures for the manual
07/16/12:
- 23:08 Changeset [14271] by
- adding docs
- 23:04 Changeset [14270] by
- adding docs
- 17:49 Changeset [14269] by
- forgot helper.hxx
- 17:45 Changeset [14268] by
- evolving
- 09:46 Changeset [14267] by
- additional out put for wait-states in scripts
- 09:28 Changeset [14266] by
- additional out put for wait-states in scripts
- 09:27 Changeset [14265] by
- additional out put for wait-states in scripts
- 09:25 Changeset [14264] by
- additional out put for wait-states in scripts
- 09:21 Changeset [14263] by
- additional out put for wait-states in scripts
- 09:09 Changeset [14262] by
- modified output
07/13/12:
- 23:26 Changeset [14261] by
- I know it shouldnt be here
- 15:53 Changeset [14260] by
- Default initialisation for FADctrl InitSequence
- 09:54 Changeset [14259] by
- evolve
07/12/12:
- 22:28 Changeset [14258] by
- Adding Arduino Shutter Control code to the repository
- 12:46 Changeset [14257] by
- evolving
- 06:40 Changeset [14256] by
- factdimserver has more timeouts and the eventviewer is coming
07/11/12:
- 10:27 Changeset [14255] by
- Edd will use localhost if DIM_DNS_NODE not set
07/10/12:
- 07:38 Changeset [14254] by
- evolving
Note:
See TracTimeline
for information about the timeline view.
