Timeline
08/13/12:
- 21:23 Changeset [14362] by
- Return codes for state handlers were missing.
- 21:22 Changeset [14361] by
- Some fixes...
- 18:01 Changeset [14360] by
- 16:55 Changeset [14359] by
- new shutter page
- 12:39 Changeset [14358] by
- whitespace
- 12:28 Changeset [14357] by
- checking mod on lidcontrol
- 12:16 Changeset [14356] by
- initial commit: dimscript for doing a ratescan
- 10:33 Changeset [14355] by
- fDimFTM should be a described stat for the PRINT command; the switch from disconnected to connected can be bound to a change of the ftmctrl state into HandleFtmstateChange.
- 09:55 Changeset [14354] by
- Initialize fEnabled.
- 09:54 Changeset [14353] by
- Adapted to the new states of the dimctrl.
- 09:52 Changeset [14352] by
- The subscription to the nominal bias voltage was missing. Make sure that in case of a bias crate calibration the first step is setting the correct voltage.
- 09:49 Changeset [14351] by
- The state from the callback was not yet properly propagated. Implemented kSM_KeepState to signal that the state should not change.
- 09:45 Changeset [14350] by
- It is not necessary to check the rate control only for the timeout of the FADs. Before starting the trigger we have to wait until the state of the rate control is GlobalThresholdSet
- 09:43 Changeset [14349] by
- The state description for the Locked state was missing.
- 09:42 Changeset [14348] by
- Do npt print a message when only a new command appears.
08/12/12:
- 22:49 Changeset [14347] by
- add two triggers if starting FADs failed to request satus
- 22:30 Changeset [14346] by
- add a wait of 6 sec before starting FADs
- 20:59 Changeset [14345] by
- optimized output to 40 signs textwidth
- 20:34 Changeset [14344] by
- add output
- 20:25 Changeset [14343] by
- optimized output to 40 signs textwidth
- 20:24 Changeset [14342] by
- optimized output to 40 signs textwidth
- 20:18 Changeset [14341] by
- deleted useless output
- 20:15 Changeset [14340] by
- whitespace changes
- 20:15 Changeset [14339] by
- whitespace changes
- 20:14 Changeset [14338] by
- optimized output to 40 signs textwidth
- 19:34 Changeset [14337] by
- optimized output to 40 sign textwidth
- 19:29 Changeset [14336] by
- optimized output to 40 sign textwidth
- 15:21 Changeset [14335] by
- added seperators
- 15:19 Changeset [14334] by
- optimized output width
- 15:07 Changeset [14333] by
- optimized output width
- 14:55 Changeset [14332] by
- typo
- 14:48 Changeset [14331] by
- changed wait states to new state ID of FACT++.upgrade
- 14:46 Changeset [14330] by
- modified: for software startup
08/08/12:
- 21:19 Changeset [14329] by
- Last fix did not compile -- fixed.
- 21:18 Changeset [14328] by
- Updated to the latest version auf autoconf/automake
- 13:53 Changeset [14327] by
- A small bugfix that the bin-width for the visibility plots cannot get negative.
- 06:54 Changeset [14326] by
- added if IsConnected
08/07/12:
- 23:12 Changeset [14325] by
- debugged a typo
- 22:22 Changeset [14324] by
- added AntiFloddingTimer
- 20:02 Changeset [14323] by
- Some security update to the escaping.
- 09:48 Changeset [14322] by
- Improved logging output.
- 09:47 Changeset [14321] by
- Added the kNoDelay option to ensure that packets are not split.
- 09:47 Changeset [14320] by
- Improved logging output.
- 09:46 Changeset [14319] by
- Improved logging output.
- 09:46 Changeset [14318] by
- Improved logging output.
- 06:12 Changeset [14317] by
- added RequestStatus, after Output on/off; output on/off was only allowed in Connected, but not in Voltage_On/_Off corrected that
08/06/12:
- 22:16 Changeset [14316] by
- step by step ... going to test it
- 21:08 Changeset [14315] by
- slowly evolving
- 11:57 Changeset [14314] by
- still tidying up
- 11:53 Changeset [14313] by
- trying to clean up
- 11:37 Changeset [14312] by
- The month is given in the range 0..11 not 1..12
- 10:06 Changeset [14311] by
- add disable all FTUs and Stop_Trigger
08/04/12:
- 11:13 Changeset [14310] by
- Fixed a problem with the visibility and current-predition if sources have their maximum at the same time.
- 10:54 Changeset [14309] by
- Calculate current curve only if source is visible above 75deg. Made checks consistent.
08/02/12:
- 16:12 Changeset [14308] by
- Added the distance to the sun... the sun's zd needs to be checked... it seems it is not correctly calculated below the horizon.
- 15:42 Changeset [14307] by
- Added sun angle.
- 13:22 Changeset [14306] by
- Fixed a performance issue with the calculation of the moon position, convert the light condition directly to currents, renamed the light-condition to current-prediction.
- 10:30 Changeset [14305] by
- Write binary file.
- 09:57 Changeset [14304] by
- Added missing include of glu-.h
- 09:57 Changeset [14303] by
- Removed double include at the first line and added missing include of glu.h
- 09:56 Changeset [14302] by
- Implemented light-condition.data and set an empty default for th database string.
- 02:26 Changeset [14301] by
- initial commit: do a software shutdown
- 02:25 Changeset [14300] by
- add a ping of the FTUs
08/01/12:
- 17:40 Changeset [14299] by
- just need to check in quickly
- 17:02 Changeset [14298] by
- initial commit: take a pedestal run with ROI 1024
- 17:01 Changeset [14297] by
- modified location of subscripts
- 16:59 Changeset [14296] by
- moved script to folder service scripts
- 16:55 Changeset [14295] by
- initial commit: reset crate after fad-loss or drs-underflow
- 16:54 Changeset [14294] by
- add waitstates to automaticaly wait the right time before reconnecting to a board
- 13:58 Changeset [14293] by
- changed HeadersFSC to HeadersAgilent
- 13:45 Changeset [14292] by
- initial commit
- 12:53 Changeset [14291] by
- initial commint
07/31/12:
- 22:45 Changeset [14290] by
- added scripts for 2344
07/27/12:
- 12:47 Changeset [14289] by
- remove auxillary LaTex files, cleanup
- 12:46 Changeset [14288] by
- final version of the FTM firmware docu
- 09:26 Changeset [14287] by
07/25/12:
- 17:22 Changeset [14286] by
- Updated to v19r37
07/24/12:
- 15:36 Changeset [14285] by
- put the drive system status check in to the separate script
- 15:36 Changeset [14284] by
- put the drive system status check in to the separate script
- 14:43 Changeset [14283] by
- deleted drive check and put it to separate file
- 14:41 Changeset [14282] by
- Initial commit: check if drive is tracking
- 11:02 Changeset [14281] by
- add SwitchOnBias.dim
07/21/12:
- 08:06 Changeset [14280] by
- first drfat of the manual
- 08:00 Changeset [14279] by
- first drfat of the manual
07/19/12:
- 15:33 Changeset [14278] by
- Added modified calibration procedure for FADctrl for new FAD-based stand-alone oscilloscope.
- 14:20 Changeset [14277] by
- Initial Commit: Recalculate gainfits for an allready calculated Amplitude/Integral Spectrum
07/18/12:
- 17:46 Changeset [14276] by
- initial commit: switch on feedback and bias
- 17:45 Changeset [14275] by
- LP_rate_test.dim .. for tonight
- 11:23 Changeset [14274] by
- shutter controller docs: adding description of the cabling
07/17/12:
- 17:25 Changeset [14273] by
- ShutterControlled, added tech details
- 13:17 Changeset [14272] by
- ShutterControlled, committing figures for the manual
07/16/12:
- 23:08 Changeset [14271] by
- adding docs
- 23:04 Changeset [14270] by
- adding docs
- 17:49 Changeset [14269] by
- forgot helper.hxx
- 17:45 Changeset [14268] by
- evolving
- 09:46 Changeset [14267] by
- additional out put for wait-states in scripts
- 09:28 Changeset [14266] by
- additional out put for wait-states in scripts
- 09:27 Changeset [14265] by
- additional out put for wait-states in scripts
- 09:25 Changeset [14264] by
- additional out put for wait-states in scripts
- 09:21 Changeset [14263] by
- additional out put for wait-states in scripts
- 09:09 Changeset [14262] by
- modified output
Note:
See TracTimeline
for information about the timeline view.
