Timeline



08/16/12:

09:46 Changeset [14383] by lyard
testing svn read-only
09:18 Changeset [14382] by lyard
testing svn read-only
09:16 Changeset [14381] by lyard
testing read-only svn
08:50 Changeset [14380] by lyard
testing read-only svn

08/15/12:

15:47 Changeset [14379] by lyard
testing read-only svn
15:46 Changeset [14378] by lyard
testing read-only svn
15:44 Changeset [14377] by lyard
testing read-only svn
15:43 Changeset [14376] by lyard
testing read-only svn
15:43 Changeset [14375] by lyard
testing read-only svn
09:16 Changeset [14374] by Jens Buss
fixed bug for numbers below 10

08/14/12:

12:42 Changeset [14373] by lyard
remove MESSAGE from the service name in log and report files
12:30 Changeset [14372] by tbretz
Fixed a few dimctrl issues related to the new version.
12:29 Changeset [14371] by tbretz
Adapted to new format of Dim Control messages.
12:28 Changeset [14370] by tbretz
Adapted ChangeState to properly send informations; adapted Write to keep mssages in sync; renamed DIM_CONTROL2 to DIM_CONTROL
12:27 Changeset [14369] by tbretz
Removed an obsolete debug output.
12:26 Changeset [14368] by tbretz
Send the correct state in case of an error.
12:26 Changeset [14367] by tbretz
Added the missing Configuring state description; fixed the string sent to the FTM_CONTROL/CONFIGURE
12:25 Changeset [14366] by tbretz
Shortened a few descriptions complained by the datalogger
12:25 Changeset [14365] by tbretz
Made sure that the Uncomment does not remove the escape characters; allow single and double hypen as escape character.
11:08 Changeset [14364] by lyard
fixed missing columns desc and log entries
09:46 Changeset [14363] by Jens Buss
changed to new variable names and options

08/13/12:

21:23 Changeset [14362] by tbretz
Return codes for state handlers were missing.
21:22 Changeset [14361] by tbretz
Some fixes...
18:01 Changeset [14360] by tbretz
16:55 Changeset [14359] by boccone
new shutter page
12:39 Changeset [14358] by Jens Buss
whitespace
12:28 Changeset [14357] by boccone
checking mod on lidcontrol
12:16 Changeset [14356] by Jens Buss
initial commit: dimscript for doing a ratescan
10:33 Changeset [14355] by tbretz
fDimFTM should be a described stat for the PRINT command; the switch from disconnected to connected can be bound to a change of the ftmctrl state into HandleFtmstateChange.
09:55 Changeset [14354] by tbretz
Initialize fEnabled.
09:54 Changeset [14353] by tbretz
Adapted to the new states of the dimctrl.
09:52 Changeset [14352] by tbretz
The subscription to the nominal bias voltage was missing. Make sure that in case of a bias crate calibration the first step is setting the correct voltage.
09:49 Changeset [14351] by tbretz
The state from the callback was not yet properly propagated. Implemented kSM_KeepState to signal that the state should not change.
09:45 Changeset [14350] by tbretz
It is not necessary to check the rate control only for the timeout of the FADs. Before starting the trigger we have to wait until the state of the rate control is GlobalThresholdSet
09:43 Changeset [14349] by tbretz
The state description for the Locked state was missing.
09:42 Changeset [14348] by tbretz
Do npt print a message when only a new command appears.

08/12/12:

22:49 Changeset [14347] by Jens Buss
add two triggers if starting FADs failed to request satus
22:30 Changeset [14346] by Jens Buss
add a wait of 6 sec before starting FADs
20:59 Changeset [14345] by Jens Buss
optimized output to 40 signs textwidth
20:34 Changeset [14344] by Jens Buss
add output
20:25 Changeset [14343] by Jens Buss
optimized output to 40 signs textwidth
20:24 Changeset [14342] by Jens Buss
optimized output to 40 signs textwidth
20:18 Changeset [14341] by Jens Buss
deleted useless output
20:15 Changeset [14340] by Jens Buss
whitespace changes
20:15 Changeset [14339] by Jens Buss
whitespace changes
20:14 Changeset [14338] by Jens Buss
optimized output to 40 signs textwidth
19:34 Changeset [14337] by Jens Buss
optimized output to 40 sign textwidth
19:29 Changeset [14336] by Jens Buss
optimized output to 40 sign textwidth
15:21 Changeset [14335] by Jens Buss
added seperators
15:19 Changeset [14334] by Jens Buss
optimized output width
15:07 Changeset [14333] by Jens Buss
optimized output width
14:55 Changeset [14332] by Jens Buss
typo
14:48 Changeset [14331] by Jens Buss
changed wait states to new state ID of FACT++.upgrade
14:46 Changeset [14330] by Jens Buss
modified: for software startup

08/08/12:

21:19 Changeset [14329] by tbretz
Last fix did not compile -- fixed.
21:18 Changeset [14328] by tbretz
Updated to the latest version auf autoconf/automake
13:53 Changeset [14327] by tbretz
A small bugfix that the bin-width for the visibility plots cannot get negative.
06:54 Changeset [14326] by neise
added if IsConnected

08/07/12:

23:12 Changeset [14325] by neise
debugged a typo
22:22 Changeset [14324] by neise
added AntiFloddingTimer
20:02 Changeset [14323] by tbretz
Some security update to the escaping.
09:48 Changeset [14322] by tbretz
Improved logging output.
09:47 Changeset [14321] by tbretz
Added the kNoDelay option to ensure that packets are not split.
09:47 Changeset [14320] by tbretz
Improved logging output.
09:46 Changeset [14319] by tbretz
Improved logging output.
09:46 Changeset [14318] by tbretz
Improved logging output.
06:12 Changeset [14317] by neise
added RequestStatus, after Output on/off; output on/off was only allowed in Connected, but not in Voltage_On/_Off corrected that

08/06/12:

22:16 Changeset [14316] by neise
step by step ... going to test it
21:08 Changeset [14315] by neise
slowly evolving
11:57 Changeset [14314] by neise
still tidying up
11:53 Changeset [14313] by neise
trying to clean up
11:37 Changeset [14312] by tbretz
The month is given in the range 0..11 not 1..12
10:06 Changeset [14311] by Jens Buss
add disable all FTUs and Stop_Trigger

08/04/12:

11:13 Changeset [14310] by tbretz
Fixed a problem with the visibility and current-predition if sources have their maximum at the same time.
10:54 Changeset [14309] by tbretz
Calculate current curve only if source is visible above 75deg. Made checks consistent.

08/02/12:

16:12 Changeset [14308] by tbretz
Added the distance to the sun... the sun's zd needs to be checked... it seems it is not correctly calculated below the horizon.
15:42 Changeset [14307] by tbretz
Added sun angle.
13:22 Changeset [14306] by tbretz
Fixed a performance issue with the calculation of the moon position, convert the light condition directly to currents, renamed the light-condition to current-prediction.
10:30 Changeset [14305] by tbretz
Write binary file.
09:57 Changeset [14304] by tbretz
Added missing include of glu-.h
09:57 Changeset [14303] by tbretz
Removed double include at the first line and added missing include of glu.h
09:56 Changeset [14302] by tbretz
Implemented light-condition.data and set an empty default for th database string.
02:26 Changeset [14301] by Jens Buss
initial commit: do a software shutdown
02:25 Changeset [14300] by Jens Buss
add a ping of the FTUs

08/01/12:

17:40 Changeset [14299] by neise
just need to check in quickly
17:02 Changeset [14298] by Jens Buss
initial commit: take a pedestal run with ROI 1024
17:01 Changeset [14297] by Jens Buss
modified location of subscripts
16:59 Changeset [14296] by Jens Buss
moved script to folder service scripts
16:55 Changeset [14295] by Jens Buss
initial commit: reset crate after fad-loss or drs-underflow
16:54 Changeset [14294] by Jens Buss
add waitstates to automaticaly wait the right time before reconnecting to a board
13:58 Changeset [14293] by neise
changed HeadersFSC to HeadersAgilent
13:45 Changeset [14292] by neise
initial commit
12:53 Changeset [14291] by neise
initial commint

07/31/12:

22:45 Changeset [14290] by neise
added scripts for 2344

07/27/12:

12:47 Changeset [14289] by vogler
remove auxillary LaTex files, cleanup
12:46 Changeset [14288] by vogler
final version of the FTM firmware docu
09:26 Changeset [14287] by tbretz

07/25/12:

17:22 Changeset [14286] by tbretz
Updated to v19r37

07/24/12:

15:36 Changeset [14285] by Jens Buss
put the drive system status check in to the separate script
15:36 Changeset [14284] by Jens Buss
put the drive system status check in to the separate script
14:43 Changeset [14283] by Jens Buss
deleted drive check and put it to separate file
14:41 Changeset [14282] by Jens Buss
Initial commit: check if drive is tracking
11:02 Changeset [14281] by Jens Buss
add SwitchOnBias.dim

07/21/12:

08:06 Changeset [14280] by boccone
first drfat of the manual
08:00 Changeset [14279] by boccone
first drfat of the manual

07/19/12:

15:33 Changeset [14278] by ogrimm
Added modified calibration procedure for FADctrl for new FAD-based stand-alone oscilloscope.
14:20 Changeset [14277] by Jens Buss
Initial Commit: Recalculate gainfits for an allready calculated Amplitude/Integral Spectrum

07/18/12:

17:46 Changeset [14276] by Jens Buss
initial commit: switch on feedback and bias
17:45 Changeset [14275] by neise
LP_rate_test.dim .. for tonight
11:23 Changeset [14274] by boccone
shutter controller docs: adding description of the cabling

07/17/12:

17:25 Changeset [14273] by boccone
ShutterControlled, added tech details
13:17 Changeset [14272] by boccone
ShutterControlled, committing figures for the manual
Note: See TracTimeline for information about the timeline view.