Timeline
02/25/13:
- 15:48 Changeset [14961] by
- Make sure that the stoi if failing cannot crash the program.
- 14:41 Changeset [14960] by
- Fixed a compilation issue Etienne had introduced with his latest changes.
- 14:30 Changeset [14959] by
- Forgot some comments around some new not yet useful code.
- 14:08 Changeset [14958] by
- Removed a stray whitespace.
- 11:52 Changeset [14957] by
- Somebody fixed the comments printed to the console...
- 11:51 Changeset [14956] by
- The locking of the clock conditioner cannot be checked during configuration because the first report after configuration always states that it is not locked. However, if the trigger is switched on, it can be checked continously.
- 11:48 Changeset [14955] by
- Use an IP Address from the internal network to find the correct IP Address. In all other cases the traffic could be routed through the external address which would lead wrong results.
- 11:46 Changeset [14954] by
- Added run-type single-pe, although I am not sure it is currently in use, but it is in the config database.
- 11:29 Changeset [14953] by
- Added the possibility to send OPEN and CLOSE even if the status of the lids is not precisely known.
02/24/13:
- 11:07 Changeset [14952] by
- whitespace and comments
- 10:52 Changeset [14951] by
- added SetVerbLevel, out histo reseted in Bootstrap histogramm
02/23/13:
- 14:00 Changeset [14950] by
- Added some explanation to the new T* data
- 12:34 Changeset [14949] by
- Added a lot of comments to the timing calibration functions.
- 10:57 Changeset [14948] by
- Added T3, T6, T9, T12 (preliminary)
- 10:56 Changeset [14947] by
- Added webDid to possible targets
02/21/13:
- 14:56 Changeset [14946] by
- added dynamic startvalue calculation
- 14:54 Changeset [14945] by
- stuff
- 14:54 Changeset [14944] by
- changed number of entries from double to float
- 14:53 Changeset [14943] by
- disttribution histogramms added to hist list and saved to root file
- 14:52 Changeset [14942] by
- stuff
- 14:01 Changeset [14941] by
- changed SaveHistograms to SaveFileList
- 13:59 Changeset [14940] by
- deleted code to put meta data into rootfile
- 13:46 Changeset [14939] by
- Added WebDID from v20r5
- 13:39 Changeset [14938] by
- Added a workaround to let webDid find its data.
- 13:10 Changeset [14937] by
- Added in v20r5
- 13:07 Changeset [14936] by
- Changed to v20r5.
02/20/13:
- 14:49 Changeset [14935] by
- Add changes necessary to remove fits completely from namespace std in MARS.
02/17/13:
- 10:52 Changeset [14934] by
- Added additional options also for debug ACLIC mode.
- 10:52 Changeset [14933] by
- Encapsulated the std-namespace in ifdefs. It seems that ACLIC doesn't work well with that -- although I am not yet sure that this solves the real problem.
02/15/13:
- 21:04 Changeset [14932] by
- Macro to re-calculate the drs calibration constants (.drs.fits files)
- 21:02 Changeset [14931] by
- Write file numbers instead of run-numbers as it is in the real files -- still the NIGHT keyword is wrong.
02/14/13:
- 17:20 Changeset [14930] by
- Reformatted help output.
- 16:28 Changeset [14929] by
- Improved help text.
02/13/13:
- 16:56 Changeset [14928] by
- Added mdrs
- 16:56 Changeset [14927] by
- Added mdrs
- 16:54 Changeset [14926] by
- Added the drs calibration class from mcore
- 16:51 Changeset [14925] by
- Moved DRS classes to mdrs
- 16:50 Changeset [14924] by
- Moved to mdrs
- 16:48 Changeset [14923] by
- Moved to mdrs
- 16:47 Changeset [14922] by
- New classes for DRS calibration.
- 13:18 Changeset [14921] by
- Removed stray debig option.
- 10:53 Changeset [14920] by
- Added class to apply the drs calibration.
- 10:50 Changeset [14919] by
- Added MCalibrateFact and MCalibrateDrsTimes
- 10:49 Changeset [14918] by
- Reverting to last revision.
- 10:49 Changeset [14917] by
- Reverting to last revision.
- 10:48 Changeset [14916] by
- Reverting to last revision.
- 10:48 Changeset [14915] by
- Reverting to last revision.
- 10:48 Changeset [14914] by
- Reverting to last revision.
- 10:48 Changeset [14913] by
- Reverting to last revision.
- 10:47 Changeset [14912] by
- Reverting to last revision.
- 10:47 Changeset [14911] by
- Reverting to last revision.
- 10:47 Changeset [14910] by
- Reverting to last revision.
- 10:46 Changeset [14909] by
- Reverting to last revision.
- 10:46 Changeset [14908] by
- Reverting to last revision.
- 10:46 Changeset [14907] by
- Reverting to last revision.
- 10:45 Changeset [14906] by
- Reverting to last revision.
- 10:45 Changeset [14905] by
- Reverting to last revision.
- 10:44 Changeset [14904] by
- Reverting to last revision.
- 10:44 Changeset [14903] by
- Reverting to last revision.
- 10:44 Changeset [14902] by
- Reverting to last revision.
- 10:43 Changeset [14901] by
- Reverting to last revision.
- 10:43 Changeset [14900] by
- Reverting to last revision.
- 10:42 Changeset [14899] by
- Reverting to last revision.
- 10:41 Changeset [14898] by
- Reverting to last revision.
- 10:41 Changeset [14897] by
- Reverting to last revision.
- 10:34 Changeset [14896] by
- Added MCalibrateFact and MCalibrateDrsTimes
- 10:34 Changeset [14895] by
- Added calibration class for DRS timing
- 10:32 Changeset [14894] by
- New class to do the basic FACT calibration (to be improved/extended)
- 10:29 Changeset [14893] by
- Adapted the call to MHSrcPosCam
- 10:09 Changeset [14892] by
- Writing the run headers when the file gets closed writes the run header a second time... although this way we miss the number of events, but there is no easy solution at the moment.
- 10:08 Changeset [14891] by
- Allow to set the wobble offset directly.
- 09:56 Changeset [14890] by
- Use the SetFlagsOpt function to set the additional flags.
- 09:55 Changeset [14889] by
- Added GetNumRows
- 09:53 Changeset [14888] by
- Added a possible fix for newer root versions... might not be the best one yet.
02/09/13:
- 18:19 Changeset [14887] by
- I think I moved the tests and examples into its own folder, in order to keep the scripts folder tidy
- 18:17 Changeset [14886] by
- finally checking in the typo I found weeks ago. The typo caused no nice Error message to be printed, when the user is not putting the schedule in the right order
- 16:35 Changeset [14885] by
- Allow empty source name and updated the forumla for current prediction
02/08/13:
- 22:54 Changeset [14884] by
- changed the layout of fact_dim_servers.py
02/07/13:
- 13:37 Changeset [14883] by
- Fixed a mistake in the new formula.
- 10:57 Changeset [14882] by
- Added a new preliminary formula for current prediction based on a higher statistical bases.
- 08:11 Changeset [14881] by
- adapted dates so that it runs only for the last 3 days
- 08:05 Changeset [14880] by
- added new values
02/06/13:
- 14:37 Changeset [14879] by
- added getting every 15 min gtc-image
- 14:36 Changeset [14878] by
- added filling of currents
- 14:31 Changeset [14877] by
- changed emailadresses in setup files, cleaned setup files for La Palma
- 12:56 Changeset [14876] by
- Added a fix for the +services. No easy way to test that... needs testing in real conditions.
- 10:50 Changeset [14875] by
- removed not needed logging and logfile, added comments
- 08:59 Changeset [14874] by
- reinstated the extra fence against + characters in the logger
02/05/13:
- 16:20 Changeset [14873] by
- Updated, fixed some docs (typos, wrong text)
- 16:05 Changeset [14872] by
- Introduce the output of an JS Exception with a pipe to make sure that leading whitespaces are kept.
- 15:15 Changeset [14871] by
- Added magiclidar and zfits
- 14:56 Changeset [14870] by
- changed fits comment delimiters from [fits ] to {fits }
- 14:51 Changeset [14869] by
- removed compilation warnings
- 14:34 Changeset [14868] by
- 14:29 Changeset [14867] by
- Added requirement to explicitely allow for fits comments auto-trim
- 13:56 Changeset [14866] by
- Fixed viewer compilation after ofits.h update. Oddly enough, the viewer is NOT writing fits files...
02/04/13:
- 12:18 Changeset [14865] by
- Added a new function to treat the spikes; improved treatment for steps when they coincide with spikes and the rms is large
- 12:04 Changeset [14864] by
- Added the possibility to switch between fits and root files.
- 10:37 Changeset [14863] by
- Improved output for clock conditioner.
- 10:36 Changeset [14862] by
- Removed a workaround which became obsolete with a newer root version.
- 10:34 Changeset [14861] by
- Updated all functions related to MAstro::GetDevAbs - they might however still need some check for signs.
- 10:18 Changeset [14860] by
- Added a complete list of stdint.h members for CITN.
- 10:14 Changeset [14859] by
- Fixed a typo
- 10:07 Changeset [14858] by
- Updated the list of availavble file types.
- 10:06 Changeset [14857] by
- Initialize fNumTotalEvents in constructor
- 10:03 Changeset [14856] by
- Added a case 4 for retrieving pixel informations
- 10:02 Changeset [14855] by
- Added the possibility to set name of MSignalCam
- 10:00 Changeset [14854] by
- Added a few more options of what to extract, including width of pulse.
- 09:59 Changeset [14853] by
- Added the path argument to the ReadList function
- 09:54 Changeset [14852] by
- Adapted GetDevAbs call
- 09:53 Changeset [14851] by
- Made GetDevAbs more accurate.
- 06:59 Changeset [14850] by
- added cron for FillMoonInfo.sh, do FillAuxData.sh more frequently
- 06:43 Changeset [14849] by
- reduced number of nights to be checked (to run script in cron)
- 06:10 Changeset [14848] by
- fill moon info only if available
- 06:08 Changeset [14847] by
- changed MAILTO
- 06:06 Changeset [14846] by
- changed MAILTO
- 06:06 Changeset [14845] by
- changed MAILTO, removed transfer jobs
- 06:05 Changeset [14844] by
- changed MAILTO
- 06:05 Changeset [14843] by
- changed MAILTO, added automatic analysis
- 06:04 Changeset [14842] by
- changed MAILTO
- 06:03 Changeset [14841] by
- adapted to new structure in LP (newdaq, new transfer scheme)
- 06:02 Changeset [14840] by
- adapted to new structure in LP (newdaq, new transfer scheme)
- 06:01 Changeset [14839] by
- adapted path to Mars version, added rsync temp dir
- 06:00 Changeset [14838] by
- adapted to new structure in LP (newdaw): removed md5sum, changed method for verfying that file is finished (check if file was closed via TSTOP), create directories only if data available
- 05:57 Changeset [14837] by
- added sigma to statistic in getstatistics function
- 05:51 Changeset [14836] by
- added (script to check temperature aus files and fill temperatures into DB (outside temp double with other script))
- 05:47 Changeset [14835] by
- added (script to check some auxiliary and fill some temperatures in DB
- 05:46 Changeset [14834] by
- added (script to check tracking file and fill ctrl deviation in DB
- 05:43 Changeset [14833] by
- added (script to check some auxiliary files, to calibrate currents and to fill currents to DB
- 05:41 Changeset [14832] by
- added (script to check consistency of tools for processing)
- 05:37 Changeset [14831] by
- workaround for sge because several jobs in the queue appear in only 1 line
- 05:36 Changeset [14830] by
- small change for date calculation
- 05:35 Changeset [14829] by
- new cleaning level
- 05:34 Changeset [14828] by
- removed -t for fitsdump as this option was removed
- 05:31 Changeset [14827] by
- small change for date calculation
- 05:29 Changeset [14826] by
- added sorting direction for gettodo for processing (i.e. order of processing can be changed on the fly)
- 05:26 Changeset [14825] by
- added DriveFileAvailISDC to the tables to be checked as this is used for analysis/processing
- 05:16 Changeset [14824] by
- updated to changes in LP (newdaq), implemented PhiDo (still commented), added checking of DB for crashed and failed transfer processes
- 05:14 Changeset [14823] by
- path to newest Mars and data version (2012.06.22)
02/01/13:
- 09:09 Changeset [14822] by
- In the example, alignment on two samples is enough
- 08:11 Changeset [14821] by
- new full photon table added to Run object after reading the entire file.
- 08:11 Changeset [14820] by
- initial commit; run before actual photon tracing.
01/31/13:
- 16:16 Changeset [14819] by
- Fixed the range calculation in the example for an improved compression
- 15:15 Changeset [14818] by
- save parameters
- 15:12 Changeset [14817] by
- changed saveHistograms to SaveList
- 15:08 Changeset [14816] by
- save parameters
- 12:36 Changeset [14815] by
- whitespace
- 12:35 Changeset [14814] by
- new construktor is pulse order, new calculation of phe
- 12:34 Changeset [14813] by
- whitespace
- 12:34 Changeset [14812] by
- dynamic calulation of overlay window
- 12:32 Changeset [14811] by
- whitespace
- 12:29 Changeset [14810] by
- added length of Rising Edge
- 12:27 Changeset [14809] by
- renamed global variables, addded quality cuts, fixed bug, raw were used but spikeremoved should, number of entries set to number of insertzed pulses
- 11:56 Changeset [14808] by
- changed bin boarders of overlay histos
- 11:55 Changeset [14807] by
- small bug in if else
- 11:54 Changeset [14806] by
- comment
- 11:53 Changeset [14805] by
- initial commit
- 11:53 Changeset [14804] by
- whitespace
- 11:51 Changeset [14803] by
- rising edge synamic range calulation
- 11:49 Changeset [14802] by
- whitespace
- 11:49 Changeset [14801] by
- Display compression ratio with higher precision, added an example algorithm to compress the data slightly better (~4%)
- 09:02 Changeset [14800] by
- whitespace + comments
01/30/13:
- 16:12 Changeset [14799] by
- Added CMakeLists.txt files
- 16:09 Changeset [14798] by
- Moved MonteCarlo.h and MonteCarlo.C in the new subdirectory MonteCarlo
- 16:08 Changeset [14797] by
- 16:07 Changeset [14796] by
- uncomment the call of mmc2csv(inFile,outPath,verbLVL) in main() of mmc2csv.C
- 16:07 Changeset [14795] by
- 09:18 Changeset [14794] by
- corrected the return value from MonteCarlo::GetSeparator()
01/28/13:
- 12:33 Changeset [14793] by
- fixed warning multiple-display
- 10:55 Changeset [14792] by
- Added fits output for MC data
- 10:21 Changeset [14791] by
- Added Monte-Carlo data support. Disable 3D viewer.
Note:
See TracTimeline
for information about the timeline view.