Timeline
06/04/19:
- 20:34 Changeset [19549] by
- add grb-run
- 10:31 Changeset [19548] by
- Added new G-APD type (SensL FJ 6x6, preliminary\!)
- 10:30 Changeset [19547] by
- Replaced MReflector by new base class MOptics.
- 10:29 Changeset [19546] by
- No shadowing if the camera.
- 10:28 Changeset [19545] by
- Added new classes MOptics and MLens
- 10:27 Changeset [19544] by
- Replaced MReflector by new base class MOptics.
- 10:26 Changeset [19543] by
- Derive from the new base class. Added a member function to test if the reflector geometry is valid, for consistency renamed EXecuteReflector to ExecuteOptics
- 10:25 Changeset [19542] by
- Allow to turn some checks off for testing purposes (only\!), replaces MReflector by the new base class MOptics
- 10:18 Changeset [19541] by
- MReflector has been replaces by a common base class MOptics.
- 10:18 Changeset [19540] by
- Added a check to ensure that telescope positions are set if required.
- 10:17 Changeset [19539] by
- This is basically a copy of MReflector supposed to describe a lens.
- 10:17 Changeset [19538] by
- Added a base class describing the common features of a lens and a reflector
06/03/19:
- 15:57 Changeset [19537] by
- Adapted regexp to remove '-telXXX' from filename.
- 15:56 Changeset [19536] by
- Added setter.
- 15:55 Changeset [19535] by
- Allow to read telescope positions from a corsika input card and apply them to plain corsika data according to the telescope is in the filename.
- 09:30 Changeset [19534] by
- Instead of a constant number for Type==1 use BinningImpact. Also, if available, allow to overwrite this number from the environment (fMaxImpact). Updated class version accordingly
- 09:07 Changeset [19533] by
- Tell where the warning happened
- 09:06 Changeset [19532] by
- Two minor fixed to displayed text in plots
05/29/19:
- 11:10 Changeset [19531] by
- No special handling for PREPARE required.
- 11:07 Changeset [19530] by
- Reunified ToO and GCN commands, default state is now Armed, enter none trigger under certain conditions into the FlareAlert table, added issued triggers into a ToO table, added rise/transit/set caclulation for source and sun, some changes to the logic for pointing directions.
- 11:05 Changeset [19529] by
- Send a name instead of a trigger id... removed from struct
- 11:04 Changeset [19528] by
- Minor changes, mainly added a name which is sent.
- 10:03 Changeset [19527] by
- There was a ] too much already for a while...
05/28/19:
- 11:48 Changeset [19526] by
- improved logging output
- 11:45 Changeset [19525] by
- added (script to fill source catalogs to DB)
- 11:44 Changeset [19524] by
- removed not needed line
- 11:43 Changeset [19523] by
- removed not needed line
- 11:41 Changeset [19522] by
- added runtype grb
- 11:39 Changeset [19521] by
- added new alert type for incoming alerts
- 11:37 Changeset [19520] by
- added run type grb
- 11:36 Changeset [19519] by
- bugfixes
05/27/19:
- 19:47 Changeset [19518] by
- added (script to plot visibility)
05/26/19:
- 12:04 Changeset [19517] by
- Fixed a problem with the prpare-interrupt and load sources, fixed another case that prevented the feedback from staying in InProgress
- 12:02 Changeset [19516] by
- Do not trigger reschedule if source is already observed, added TH dependent checks for known sources, take ToO flag into account, some improvements to the output
05/25/19:
- 14:14 Changeset [19515] by
- Removed an obsolte definition
- 14:07 Changeset [19514] by
- Taking 20 1min runs makes it more consistent with the first wobble position.
- 14:02 Changeset [19513] by
- New interrupt 'PREPARE' which reloads the sources and stops the drive while the schedule is entered into the data base. This might still be optimized. Allow the scheduler during data taking on in Armed state, fixed some typos in the ToO specific code, only take 60s runs for the first two 5min slots.
- 14:00 Changeset [19512] by
- Added the nodrs and the grb flag.
- 13:59 Changeset [19511] by
- The status 'UpperClosing' was unhandled.
- 13:59 Changeset [19510] by
- Takes care of the scheduler status.
- 13:58 Changeset [19509] by
- Enable scheduler during startup.
- 13:58 Changeset [19508] by
- Instead of having a dry-run option, the scheduler can now be enabled/disabled from its command interface via START/STOP flagged by a new state 'Armed', added calculation of the relative threshold, separated calculation of source position and wobble position from calculation of schedule, only calculate the wobble position if there is a need, implemented a known_only flag which allows only for observation of already known sources, for convenience, list all gamma-ray sources within the field-of-view. Entries into the database are now enabled. The INTERRUPT send for preparation is now flagged as 'prepare' to allow Main.js to STOP the current pointing and wait for it before RELOAD_SOURCES is issued.
- 13:52 Changeset [19507] by
- Implemented a filter list to only trigger with certain paket IDs. Simplified some stuff by converting teh list of paket types to std::map
- 13:50 Changeset [19506] by
- Fixed a long existing bug which caused GetString to segfault if no string was primarily transmitted (s==-1)
- 13:49 Changeset [19505] by
- Adapted type of DataGRB::type and added new state.
- 13:49 Changeset [19504] by
- Converted the paket type list into a std::map, fixed a double entry (169) and added missing entries.
05/24/19:
- 12:34 FlareAlertsSent edited by
- added alert of this morning (diff)
05/22/19:
- 09:24 Changeset [19503] by
- fixed bug in query
05/05/19:
- 22:32 Changeset [19502] by
- fixed overwriting of table
- 21:28 Changeset [19501] by
- added fluxes, added menu for analyses, cleaned-up y-pulldown
- 17:03 Changeset [19500] by
- fixed eff-ontime
Note:
See TracTimeline
for information about the timeline view.
