Timeline
09/27/19:
- 21:56 Changeset [19698] by
- Changed the default of BaselineShift to false. This is what we use in all our simulations so far. Instead, it can now be manually enabled as a none baseline shft introduces strange values (which depend on the number of connected pixels) due to the clipping.
- 21:54 Changeset [19697] by
- Added a function to shift the signal.
- 21:54 Changeset [19696] by
- Fixed the caluclation of num events in case of single telescope files belonging to multi telescope setups.
- 20:13 Changeset [19695] by
- Added an option to write the trigger channel intp the raw channels to sample the trigger channel instead of the raw channels.
- 20:12 Changeset [19694] by
- Only check number of input files if input files are t be expected.
- 20:12 Changeset [19693] by
- Implemented to copy the signal
- 20:10 Changeset [19692] by
- The average curve errorneously took into account empty channels.
- 16:43 Changeset [19691] by
- adapted setup for new scheduling
- 16:41 Changeset [19690] by
- Allow MWriteFitsFile to access the fadc resolution.
- 16:41 Changeset [19689] by
- Propagate name of camera geometry to the header
- 16:40 Changeset [19688] by
- Propagate name of camera geometry to the header
- 16:40 Changeset [19687] by
- Avoid some warnings.
- 16:39 Changeset [19686] by
- Improved output and fixed some issued with MC files which had less than 1440 pixels.
- 16:38 Changeset [19685] by
- Improved output
- 16:27 Changeset [19684] by
- added new algorithms (visiblity ratio, time-shift) and featues (plotting, zd-histogram)
- 14:23 Changeset [19683] by
- Minor cosmetics
- 12:55 InstallingFACT++ edited by
- (diff)
- 12:55 InstallingMars edited by
- (diff)
- 12:55 InstallingROOT edited by
- (diff)
- 12:51 InstallingFACT++ edited by
- (diff)
- 12:45 InstallingMars edited by
- (diff)
09/26/19:
- 09:05 Changeset [19682] by
- Renamed famousbias source file.
09/25/19:
- 20:51 Changeset [19681] by
- Renamed source file.
09/24/19:
- 16:26 Changeset [19680] by
- Tried to get close to the ceres_12.rc, the most recent configuration for FACT.
- 15:57 Changeset [19679] by
- Fixed a type in the units of the COG
- 15:39 Changeset [19678] by
- Better titles and labels. This is logically easier to understand as the position of X=0 in the pulse is arbitrary
- 15:26 Changeset [19677] by
- The first spline knot after the cable delay is still affected by the none-simulation of the cable delay at earlier knots 8most like also the coming ones suffer slightly) -- therefore, this knot is not considered (this is mainly for convenience as it would be removed later anyways)
- 15:23 Changeset [19676] by
- Converted from percent to coefficient.
- 15:22 Changeset [19675] by
- Allow to read Transmission curve during init process, simplified the main loop a bit further by removing the pre-step, note that the transmission is now a coefficient and not in percent anymore.
- 15:21 Changeset [19674] by
- Correct for the difference between teh pulse Xmin and X=0 so that 0 is really the time of the first photon w.r.t. to X=0
- 15:19 Changeset [19673] by
- Allow to create a camera without the blind pixels.
- 14:34 Changeset [19672] by
- Some hints to resolve some chaos.
09/23/19:
- 20:37 Changeset [19671] by
- This seems to be a minimalistic way to link the libraries -- I had problems on ihp-pc45 with the old scheme. Not sure why it doesn't know libm though.
- 18:35 Changeset [19670] by
- typo
- 18:26 Changeset [19669] by
- Allow to access the number of files, fNumTelescopes should be unsigned.
- 18:25 Changeset [19668] by
- Adapted to the cahnges in MSimGeomCam
- 18:22 Changeset [19667] by
- Added Width and Length to adjustable binnings, return an error in case no file was given, fixed the display of the delay between the first photon and the trigger, fixed th e binning of the corresponding histogram (adjusted to nanoseconds)
- 18:20 Changeset [19666] by
- Adapted unit conversion to intended trigger position in nanoseconds, and trigge rposition in nanoseconds.
- 18:18 Changeset [19665] by
- PulsePos is in naoseconds -- therefore the conversion is wrong: fixed, the trigger position is now in nanoseconds.
- 18:17 Changeset [19664] by
- Added some longer comments on the meaning of some variables, the valid range must be aligned with the pulse width, not Xminand Xmax of the pulse. The pulse is now shifted such that a photon with t=0 (w.r.t. to the simulation sampling window) gets sampled fully into the window
- 18:11 Changeset [19663] by
- last is the number of samples converted to nanoseconds, the conversion was wrong -- fixed. Renamed ns to win for a better readability. The pulse spline x-axis is samples, not nano-seconds, added the conversion factor. Added a longer comment about the calculation.
- 18:08 Changeset [19662] by
- Added some comments about units
- 18:07 Changeset [19661] by
- Removed a stray cout
09/21/19:
09/19/19:
- 15:34 Changeset [19660] by
- New files
09/17/19:
- 18:35 Changeset [19659] by
- This solution works on my laptop and piotl. I hope it does not break another system now.
- 10:38 Changeset [19658] by
- Same as before, but nicer and easier to read.
- 10:30 Changeset [19657] by
- A mistake in the logic.
- 10:03 Changeset [19656] by
- Ignore shortName for types 171,173 and 174.
- 09:51 Changeset [19655] by
- Added to more functions to be able to access the returncode for the object.
- 09:51 Changeset [19654] by
- Fixed a problem (hopefully) when type 7 alerts are entered into the database. The visibility of the object was totally nonesense.
09/16/19:
- 10:36 Changeset [19653] by
- Minor cleanup
- 10:10 InstallingROOT edited by
- (diff)
- 10:10 InstallingFACT++ edited by
- (diff)
- 10:09 InstallingMars edited by
- (diff)
09/15/19:
- 22:45 Changeset [19652] by
- Fixed a surprisingly old bug. The legend was wrong.
- 22:35 Changeset [19651] by
- Focal length according to datasheet.
- 22:35 Changeset [19650] by
- Set a reasonable default angle
- 22:24 Changeset [19649] by
- Defining correct focal distance, disentengle wavelength for lens definition from photon wavelength
- 22:23 Changeset [19648] by
- Minor fixes and improvements.
- 22:22 Changeset [19647] by
- That was the better fix
- 22:20 Changeset [19646] by
- Replaces gLog by *fLog, try-and-error debugging (using d=10 and d=20) what the correct focal distance is, fixed a bug in FindPeak (accessing fGroove[-1] does not work)
- 18:36 Changeset [19645] by
- Added
- 18:32 Changeset [19644] by
- Added some comments and tried to adapt the geometry to what I would expect to be correct.
- 15:04 Changeset [19643] by
- added total number of alerts
- 14:51 Changeset [19642] by
- added total number of alerts
- 14:37 Changeset [19641] by
- replace ATel in comment by link to ATel
- 14:23 Changeset [19640] by
- Added default constructor for vector<MQuaternion>
- 14:23 Changeset [19639] by
- Added a random function to simulate a gaussian shape with long tails which do not extend over pi/2
- 14:22 Changeset [19638] by
- Updated the algorithm and added comments (still not final, I think)
- 14:21 Changeset [19637] by
- Added the possibility to turn off Fresnel reflection and added some comments.
- 14:20 Changeset [19636] by
- Added some absorption and some comments:
- 13:50 Changeset [19635] by
- added user
- 13:50 Changeset [19634] by
- addapted tables to new information, fixed bug in QLA links
- 13:27 Changeset [19633] by
- added (page to display sent alerts)
09/12/19:
- 01:30 FlareAlertsSent edited by
- added link to new page (diff)
09/10/19:
- 20:32 Changeset [19632] by
- Some updates ... not yet final.
- 20:27 Changeset [19631] by
- New example macro
09/08/19:
- 23:06 Changeset [19630] by
- Fixed a typo in a comment.
- 23:05 Changeset [19629] by
- Some ray-tracing functions.
09/07/19:
- 21:38 Changeset [19628] by
- added new periods
09/05/19:
- 11:38 Changeset [19627] by
- Implemented the possiblity to read a file list instead of a sequence file (using the --list) option and specifying a file with the .txt ending
- 11:31 Changeset [19626] by
- Added the possibility to use only one column in a file which is read with ReadFile
- 11:30 Changeset [19625] by
- Added the possibility to inject an argument manually.
09/04/19:
- 16:49 Changeset [19624] by
- Commented out obsolete code.
- 16:40 Changeset [19623] by
- Sanity check for a bad programming style.
- 16:38 Changeset [19622] by
- Performance improvement
- 16:35 Changeset [19621] by
- Obsolete.
- 10:53 Changeset [19620] by
- Silence a compiler warning.
- 10:49 Changeset [19619] by
- Get rid of some compiler warnings which come from the root dictionary:
- 10:16 Changeset [19618] by
- 10:15 Changeset [19617] by
- Moved
09/03/19:
- 17:58 Changeset [19616] by
- As a first step take out all photons which hit the lens surface straight above the draft surface.
- 17:57 Changeset [19615] by
- Some re-ordering for inexperienced users
09/02/19:
- 23:47 Changeset [19614] by
- Added comment
- 23:35 Changeset [19613] by
- Simplification
- 23:34 Changeset [19612] by
- Comment added
- 23:31 Changeset [19611] by
- Comment added
- 23:30 Changeset [19610] by
- Name change.
- 23:28 Changeset [19609] by
- Some sign changes.
- 23:13 Changeset [19608] by
- Trying to be more consistent
- 23:11 Changeset [19607] by
- Being more simple
- 22:35 Changeset [19606] by
- Minor fix, added comment.
- 22:10 Changeset [19605] by
- Minor updates
- 22:01 Changeset [19604] by
- No need for float
- 21:59 Changeset [19603] by
- The calculation for the ref index expected um not nm, the refraction produced invalid results in case R<0 (what does it mean?)
- 20:41 Changeset [19602] by
- Implemented a higher resolution type (9) for the camera
- 20:27 Changeset [19601] by
- Example for simulating wavelength range
- 20:25 Changeset [19600] by
- Removed stray line
- 20:24 Changeset [19599] by
- Possibility to simulate a Cherenkov Spectrum.
- 20:13 Changeset [19598] by
- Minor improvements:
- 20:12 Changeset [19597] by
- Improvements and fixed, adapted to the Orafol lens characteristics.
- 18:43 Changeset [19596] by
- A simple macro to simulate the image of a fresnel lens.
- 18:39 Changeset [19595] by
- Renames class from MLens to MFresnelLens
- 18:35 Changeset [19594] by
- Renamed MLens to MFResnelLens
- 18:35 Changeset [19593] by
- Renamed MLens to MFresnelLens
- 18:33 Changeset [19592] by
- A first simplified implementation of a fresnel lens.
- 18:22 Changeset [19591] by
- Setter for ImpactMax (not only via resource file)
- 18:21 Changeset [19590] by
- Allow for generalized optics not only reflectors.
- 17:35 Changeset [19589] by
- Do not handly type 110 (this is a pre-alert without coordinates), fixed some naming issues and renamed a column in a database table. Events with coordinates 0/0 are considered to have no coordinates.
- 17:34 Changeset [19588] by
- Added fRa,fDec,fErr,fName to FlareTriggers insert and renamed key on request of Daniela.
- 17:32 Changeset [19587] by
- Propagate the wavelength to the optics to allow for refraction calculation.
- 17:32 Changeset [19586] by
- Propagate the wavelength to the optics to allow for refraction calculation.
09/01/19:
- 12:23 Changeset [19585] by
- Print a warning rather when the reading is close to the lower liit rather than temperature below 0degC, further improved output
- 11:27 Changeset [19584] by
- Based on changes from Daniela: Set min ADC value to 980 (now both values can be changed via database), rephrased some output and improved some output, added some more warnings.
- 11:21 Changeset [19583] by
- Added some comments in the code and minor changes to the output.
- 11:18 Changeset [19582] by
- Added a missing sanity check in the $ function, use dereferencing rather than string().c_str() for paths.
- 11:17 Changeset [19581] by
- Fixed a race condition (as this.ok was set before the output, the values which were output might have already been affected), in case of a grb also the State 'Stopping' is allowed
Note:
See TracTimeline
for information about the timeline view.
