| | 1 | = Remote Control of the Hardware |
| | 2 | |
| | 3 | <b><i> be aware this whole section might have some mistakes yet, it will be overworked soon </i></b> |
| | 4 | |
| | 5 | __Camera and Drive__ |
| | 6 | |
| | 7 | - Camera and Drive can be controlled via the page 10.0.100.100 |
| | 8 | - or the program powerctrl |
| | 9 | - CAMERA_POWER, starts / stops the Camera |
| | 10 | - TOGGLE_DRIVE start / stop the Drive |
| | 11 | |
| | 12 | __Lid__ |
| | 13 | |
| | 14 | - lid can be controlled via the page 10.0.100.26 |
| | 15 | - or the program lidctrl |
| | 16 | |
| | 17 | __Agilent Power Supplies__ |
| | 18 | |
| | 19 | - there are 3 Power Supplies: |
| | 20 | - Interlock: |
| | 21 | - reachable via 10.0.100.224 |
| | 22 | - has to switched on |
| | 23 | - 80 V power supply for the bias crate |
| | 24 | - reachable via 10.0.100.222 |
| | 25 | - 50 V power supply for the camera |
| | 26 | - reachable via 10.0.100.220 |
| | 27 | |
| | 28 | __Ethernet Controllable Power Switches__ |
| | 29 | |
| | 30 | - there are 3 Switches |
| | 31 | - Adresses: |
| | 32 | - 10.0.100.230 |
| | 33 | - 10.0.100.232 |
| | 34 | - 10.0.100.234 |
| | 35 | - Access |
| | 36 | - on gate:/usr/local/bin/ you can find following scripts to set the state of the switches: |
| | 37 | - 10_0_100_XXX.pl |
| | 38 | - commit an option like -on=y/-off=z to it, to set the state of an output channel of the switch |
