Remote Control of the Hardware

be aware this whole section might have some mistakes yet, it will be overworked soon

Camera and Drive

• Camera and Drive can be controlled via the page 10.0.100.100
• or the program powerctrl
  • CAMERA_POWER, starts / stops the Camera
  • TOGGLE_DRIVE start / stop the Drive

Lid

• lid can be controlled via the page 10.0.100.26
• or the program lidctrl

Agilent Power Supplies

• there are 3 Power Supplies:
• Interlock:
  • reachable via 10.0.100.224
  • has to switched on
• 80 V power supply for the bias crate
  • reachable via 10.0.100.222
• 50 V power supply for the camera
  • reachable via 10.0.100.220

Ethernet Controllable Power Switches

• there are 3 Switches
• Adresses:
  • 10.0.100.230
  • 10.0.100.232
  • 10.0.100.234
• Access
  • on gate:/usr/local/bin/ you can find following scripts to set the state of the switches:
  • 10_0_100_XXX.pl
  • commit an option like -on=y/-off=z to it, to set the state of an output channel of the switch