after a power cut

restart hardware

• contact the MAGIC shift crew to switch gate back on
  • email adress of the MAGIC shifters: magic_shifters@mpp.mpg.de
  • phone numbers for MAGIC shift crew: ​http://www.magic.iac.es/contacts/, login with user "FACT" and the usual password
• go to https://trac.fact-project.org/wiki/TroubleShootingComputers and switch the other computers back
• before you do any software trouble shooting: go to ​http://10.0.100.100/ to check if the pump is working, the bias power is enabled and the cooling liquid flow meter is measuring enough throughput. In case some of it aren't, go to ​http://10.0.100.232/ and ​http://10.0.100.238/ and switch BIAS, LID and PUMP back on. Go to ​http://10.0.100.100/ to switch the camera back on.

restart software

• now the software has to be restarted according to (https://trac.fact-project.org/wiki/TroubleShootingSoftware%20)
  
• version for dummies (you can quit the screen session with Ctrl+a and d):
  

1) ssh fact@newdaq
2) screen -x => will probably say "There is no screen to be attached".
3) screen -c /home/fact/.screenrc_newdaq
4) ssh fact@gate
5) screen -x => will probably say "There is no screen to be attached".
6_A) /users needs to be mounted, 'sudo mount -a'
6_B) screen -c /users/fact/.screenrc_gate
7) ssh fact@aux
8) screen -x => will probably say "There is no screen to be attached".
9) screen -c /home/fact/.screenrc_aux
10) (still on aux) ps aux | grep vnc => if no vnc is running => vncserver :1
11) use a software like vinagre to log into the newly created vnc session: vinagre aux:1
12) to start the tpoint camera gui, in a terminal: cd /home/fact/Drive.new/FACT++ and then ./tpoint

• check in smartfact ​http://fact-project.org/smartfact, whether the systems are all in a correct state (lid closed, fad control connected, etc.)
• if not, send the corresponding commands in the screen session on newdaq

IMPORTANT

In case the telescope was operated while the power cut happened => make sure the telescope gets parked manually (TODO: link) if the observation should not be continued!!!'''