source: trunk/FACT++/src

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @12402   15 years tbretz Replaced START_RUN by START_TRIGGER
(edit) @12401   15 years tbretz Fixed the verbose screen output
(edit) @12400   15 years tbretz Replaced START_RUN and STOP_RUN by START_TRIGFGER and STOP_TRIGGER
(edit) @12399   15 years tbretz Added the possibility to calibrate the offset of the currents of the ...
(edit) @12377   15 years tbretz Fixed a command description and improved some log message.
(edit) @12372   15 years lyard implemented chunk allocation of memory. Not optimal yet, but at least ...
(edit) @12360   15 years tbretz Do not check if waiting for answer in ExpertReste if this is a OC reset
(edit) @12355   15 years tbretz
(edit) @12353   15 years tbretz Removed an obsolete comment block
(edit) @12352   15 years tbretz Adapted output of filenames.
(edit) @12351   15 years tbretz Set some fixed control loop parameters as determined in Zurich; output ...
(edit) @12350   15 years tbretz Do directly set the new reference in SetReference.
(edit) @12349   15 years tbretz Removed the warning in case of double delete... so far no problems ...
(edit) @12348   15 years tbretz Use the connection to the DNS as the IP address to get the Local IP.
(edit) @12347   15 years tbretz Make the FEEDBACK receive the data all the time for a combined control ...
(edit) @12346   15 years tbretz Do not use statvfs in SetCurrentFolder.
(edit) @12345   15 years tbretz Display N/40 in decimal
(edit) @12343   15 years tbretz Moved some common code between MARS and FACT++ to DrsCalib.h as new ...
(edit) @12342   15 years tbretz Improved output; removed obsolste ?: operators.
(edit) @12338   15 years tbretz Renamed option ramp-time to ramp-delay
(edit) @12337   15 years tbretz Removed stray debug output.
(edit) @12336   15 years tbretz For the time being go back to idle when a new run was successfully started.
(edit) @12335   15 years tbretz Improved class reference.
(edit) @12334   15 years tbretz Renamed kTakingData to kTriggerOn
(edit) @12333   15 years tbretz Added GetNumFilesOpen and IncreaseRunNumber.
(edit) @12332   15 years tbretz Replaced kTakingData by kTriggerOn
(edit) @12331   15 years tbretz Added the state kWritingData and avoid that run-numbers can be ...
(edit) @12330   15 years tbretz Added state kWritingData.
(edit) @12323   15 years tbretz Added the possibility to change the step size and maximum during a ...
(edit) @12322   15 years tbretz Allow eversything in fact++.rc
(edit) @12319   15 years tbretz Switch control off when voltage off.
(edit) @12316   15 years tbretz Removed invalid characters from Dim descriptions
(edit) @12315   15 years tbretz Make sure that the default option gets touched even it is finally not ...
(edit) @12314   15 years tbretz Stop startinga run if datalogger went into error state.
(edit) @12313   15 years tbretz Added an option to disable whole patches. fixed scaling factor in ...
(edit) @12312   15 years tbretz Fixed a workaround.
(edit) @12311   15 years tbretz Fixed writing of the data.
(edit) @12309   15 years tbretz First woring and tested version.
(edit) @12308   15 years tbretz Added specilized template to make sure we do not have to convert ...
(edit) @12294   15 years tbretz Added sending of Dim services.
(edit) @12291   15 years tbretz Use new features of trigger rate service.
(edit) @12290   15 years tbretz Included EnablePatch and a default constructor for the trigger rates.
(edit) @12287   15 years tbretz Adapted format string for TRIGGER_RATES
(edit) @12286   15 years tbretz Fixed a misspelled class name.
(edit) @12284   15 years tbretz Added elapsed time and on time to DrimTriggerRate
(edit) @12280   15 years tbretz Added the most simple spike removal before the statistics for the ...
(edit) @12279   15 years tbretz Added some more output in case the previous answer was not yet ...
(edit) @12277   15 years lyard fixed the handling of columns names in the datalogger
(edit) @12272   15 years tbretz Exchanged some values whcih were obviously exhanged
(edit) @12271   15 years tbretz Added the possibility to apply a global offset to the temperature ...
(edit) @12270   15 years tbretz Added the possibility to switch off the update interval.
(edit) @12269   15 years tbretz Fixed wiritng the fits header.
(edit) @12268   15 years tbretz Fixed the output in the txt-file.
(edit) @12267   15 years tbretz Replaced the int16_t for dac by a uint16_t
(edit) @12254   15 years tbretz Added the possibility to change the update interval online.
(edit) @12252   15 years tbretz Added commands to set LED brightness.
(edit) @12251   15 years tbretz Added descriptions for the dim services.
(edit) @12250   15 years tbretz Added some dim descriptions.
(edit) @12249   15 years tbretz Added some Dim descriptions and a new service propagating the nominal ...
(edit) @12248   15 years tbretz Added some state descriptions.
(edit) @12247   15 years tbretz Added state descriptions; replaced WAIT_FOR_RUN_NUMBER by ...
(edit) @12246   15 years tbretz Reverting to last revision.
(edit) @12245   15 years tbretz Reverting to last revision.
(edit) @12244   15 years tbretz Reverting to last revision.
(edit) @12243   15 years tbretz Added output of commands and states to --help
(edit) @12242   15 years tbretz Fixed a typo.
(edit) @12241   15 years tbretz Added possibility to scan in the N-out-of-4 logic.
(edit) @12240   15 years tbretz Some imporved output.
(edit) @12239   15 years tbretz Added configuration options and more help output.
(edit) @12238   15 years tbretz Give scan range with the START command.
(edit) @12237   15 years tbretz Allow to set one patch or pixel as reference for the rate-scan.
(edit) @12236   15 years tbretz Changed signed char to unsigned in output queue.
(edit) @12235   15 years tbretz Some lttle cosmetics; added some help stuff.
(edit) @12234   15 years tbretz Allow STOP in all states.
(edit) @12233   15 years tbretz Switch off debugging by default.
(edit) @12232   15 years tbretz Added some more DEBUG stuff.
(edit) @12231   15 years tbretz Fixed the new DEBUG stuff.
(edit) @12230   15 years tbretz Added some debug options.
(edit) @12229   15 years tbretz Added some debug out code.
(edit) @12227   15 years tbretz Latest updates and bug fixes.
(edit) @12226   15 years tbretz Latest updates and bug fixes.
(edit) @12223   15 years tbretz Fixed a scoping problem.
(edit) @12222   15 years tbretz Fixed status VoltageOff.
(edit) @12221   15 years tbretz Debuged temperature feedback.
(edit) @12219   15 years tbretz Send only calibration events to feedback system.
(edit) @12218   15 years tbretz Adapted the datalogger state checks
(edit) @12216   15 years tbretz Send a different status for FADs which are currently configured.
(edit) @12215   15 years tbretz Allow derived classes to access CloseImp from handlers.
(edit) @12214   15 years tbretz Improved error messages; replaces PostClose by CloseImp in handlers.
(edit) @12213   15 years tbretz Improved error messages; switched to hardware flow control -- does ...
(edit) @12211   15 years tbretz Added some more debug output.
(edit) @12210   15 years tbretz Debuged to make it work.
(edit) @12203   15 years tbretz Removed some obsolete output in PrintUsage
(edit) @12201   15 years tbretz First version of a tool performing a rate scan.
(edit) @12187   15 years tbretz Replaced dic_cmnd_service by DimClient::sendCommandNB.
(edit) @12183   15 years tbretz Implemented the possibility to adapt the voltage according to the ...
(edit) @12177   15 years tbretz Added new commands ENABLE_PATCH and DISABLE_PATCH
(edit) @12167   15 years tbretz Updated graph; unified paths; updated compilation of file-names; ...
(edit) @12165   15 years tbretz
(edit) @12164   15 years tbretz Added bool-cast operator to PixelMapEntry.
Note: See TracRevisionLog for help on using the revision log.