source: trunk/FACT++

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @16857   11 years tbretz Added the 'use strict'
(edit) @16854   11 years tbretz The length of the bytes released must be converted from short to bytes.
(edit) @16853   11 years tbretz Replaced some console.out by dim.log; take only 1min runs during ...
(edit) @16852   11 years tbretz Some changes to the output, replaced some console.out by dim.log
(edit) @16851   11 years tbretz Changed underflow level from 650 to 600; replaced some console.out by ...
(edit) @16848   11 years lyard Fixed reconstructed file filename
(edit) @16845   11 years lyard Added guard handling of case where startCells not found and Drs requested
(edit) @16842   11 years tbretz Updated some output.
(edit) @16841   11 years tbretz Added the possibility to interrupt the script peacefully; changed to ...
(edit) @16839   11 years tbretz Some updates on the output; removed an obsolete wait for MCP Idle.
(edit) @16838   11 years tbretz Try a CLOSE, if the LID is in the state 'Unknown' - might still need ...
(edit) @16837   11 years tbretz Added 'Overcurrent' as possible status.
(edit) @16836   11 years tbretz Use make_shared where possible.
(edit) @16835   11 years tbretz Moved the Write command back to the main thread, to ensure fast output ...
(edit) @16834   11 years tbretz Changed the time for an update of the EVENTS service to a number whihc ...
(edit) @16833   11 years tbretz The disposed handle fInterruptCallback must also be cleared, otherwise ...
(edit) @16832   11 years tbretz Using a queue, to be able to decouple writing to the log-files from ...
(edit) @16831   11 years tbretz Do not print any thresholds when the ratecontrol is not in operation.
(edit) @16830   11 years tbretz Print a warning if an interrupt request is received but no script is ...
(edit) @16829   11 years tbretz Updated.
(edit) @16828   11 years tbretz In Configured2 we do just wait.
(edit) @16827   11 years tbretz Make sure all boards are connected.
(edit) @16826   11 years lyard added 0 length files handling
(edit) @16824   11 years tbretz Updated usage information.
(edit) @16823   11 years tbretz Added libTool to showlog libraries.
(edit) @16822   11 years tbretz Removed the day-tag. It looks a bit odd, because we have night-wise ...
(edit) @16821   11 years tbretz Switch off database use for showlog as a default.
(edit) @16820   11 years lyard Modified block header's sequence scheme
(edit) @16819   11 years tbretz Added new program showlog
(edit) @16818   11 years tbretz Added new program showlog
(edit) @16817   11 years tbretz
(edit) @16814   11 years lyard added block headers and changed compression mechanism
(edit) @16813   11 years tbretz Implemented some debug out to a log-file when the sql query fails.
(edit) @16812   11 years tbretz When a user was logged in, the setting of a collaborator failed.. this ...
(edit) @16810   11 years lyard Added tile header to zfits
(edit) @16809   11 years lyard Added tile num rows tag
(edit) @16808   11 years tbretz kSM_KeepState must also be accounted for Events.
(edit) @16807   11 years tbretz Second argument was missing in all SetCurrentState (although I hope ...
(edit) @16806   11 years lyard Fixed HEAP size calculation bug
(edit) @16805   11 years lyard Added TILE marker and size between tile data
(edit) @16804   11 years tbretz Updated the description of setInterruptHandler and added triggerInterrupt
(edit) @16803   11 years tbretz If the first argument does contain an equal sign consider it to be the ...
(edit) @16802   11 years tbretz Allow arguments to be given to the interrupt handler and added a ...
(edit) @16801   11 years tbretz Replaced the new invalid FTM::State::kConfigured with Configured1 and ...
(edit) @16800   11 years tbretz Changed 90V to 80V
(edit) @16799   11 years lyard fixed fitsCompressor's copy verification issue. I was closing the file ...
(edit) @16798   11 years tbretz Reoragnized the logging output, to get closer to a final version ...
(edit) @16797   11 years tbretz Improved output when a command is sent.
(edit) @16796   11 years tbretz Wait for ftmctrl to be in Valid not Idle; changed the level to detect ...
(edit) @16795   11 years tbretz Added Configuring3 state; improved output whena command is sent:
(edit) @16794   11 years tbretz output some information so that it is aparent which FTU gives the problem.
(edit) @16793   11 years tbretz Fixed a problem with the 32bit shift operator when evaluating the ...
(edit) @16792   11 years tbretz There is not much we can do in Configured2 other than waiting for the ...
(edit) @16791   11 years tbretz Configured is now Configured1 and Configured2
(edit) @16790   11 years tbretz Added a chck for the clock conditioner; ftmctrl should now be in Valid ...
(edit) @16789   11 years tbretz Debugging output seems not needed anymore.
(edit) @16788   11 years tbretz
(edit) @16787   11 years tbretz Improved the output whenever a command is sent.
(edit) @16786   11 years tbretz Make sure no threshold is set initially below the limit (the limit is ...
(edit) @16785   11 years tbretz Replaced kConfigured with kConfigured1 according to the recent change ...
(edit) @16784   11 years tbretz Adapted the state checks according to the recent change in the ftmctrl.
(edit) @16783   11 years tbretz Replaced kConfigured by kConfigured1. This is the state in which ...
(edit) @16782   11 years tbretz Added MagicLidar and Temperature to status page; replaced some ...
(edit) @16781   11 years tbretz Implemented the algorithms needed for the new type current control ...
(edit) @16780   11 years tbretz Of course the server has to run the central loop... looks like it was ...
(edit) @16778   11 years tbretz Set all thresholds at once after the steps have been calculated using ...
(edit) @16777   11 years tbretz Added the long awaited customized template for vector<T>
(edit) @16776   11 years tbretz Implemented SET_SELECTED_THRESHOLDS to allow setting severalö ...
(edit) @16775   11 years tbretz Introduced a new state kConfiguring3 which checks if the messages to ...
(edit) @16774   11 years tbretz After five minutes of inactivity, sleep 10ms instead of 1us if all ...
(edit) @16773   11 years tbretz Introduced the new state kConfiguring3
(edit) @16772   11 years tbretz When calibrated by currents after the calibration was started, wait ...
(edit) @16771   11 years tbretz When compiling a new static buffer to be sent to the FTM, not the last ...
(edit) @16770   11 years tbretz We don't want to dispatch the event (blokcing) but to post the event ...
(edit) @16769   11 years tbretz There is no need to make the scheduling of the async write ...
(edit) @16768   11 years tbretz There is no need to make the scheduling of the async write ...
(edit) @16762   11 years tbretz Do not add zero values, they just bias the average.
(edit) @16761   11 years tbretz
(edit) @16760   11 years tbretz
(edit) @16759   11 years tbretz Removed an unintentional debug out.
(edit) @16745   11 years tbretz Should be DRS temperature not FAD tempreature.
(edit) @16744   11 years tbretz Produce some more output in case the FADs don't got properly connected.
(edit) @16743   11 years tbretz Use the QoS (num open files) of the RUNS service to detect whether a ...
(edit) @16742   11 years tbretz The format string did not match the description.
(edit) @16741   11 years tbretz Removed a stray comma from a dim service description.
(edit) @16737   11 years tbretz Implement a way to check if the (Log) Message Queue is empty. Only ...
(edit) @16736   11 years tbretz Of course we cannot call Execute of the base class, but have to make ...
(edit) @16735   11 years tbretz Some improvements on the messages when changing states.
(edit) @16734   11 years tbretz Some cosmetics.
(edit) @16733   11 years tbretz Removed some obsolete comments:
(edit) @16732   11 years tbretz Make use of the new StateMachineAsio which gets the CPU consumption to ...
(edit) @16731   11 years tbretz Make use of the new StateMachineAsio which gets the CPU consumption to ...
(edit) @16730   11 years tbretz Changed the default queue in three ways: 1) Execute() is called after ...
(edit) @16729   11 years tbretz Make use of the new StateMachineAsio which gets the CPU consumption to ...
(edit) @16728   11 years tbretz Gets the CPU consumption to basically 0 by a more intelligent event ...
(edit) @16727   11 years tbretz Make use of the new StateMachineAsio which gets the CPU consumption to ...
(edit) @16726   11 years tbretz Changed the scope of some variables and functions to allow for ...
(edit) @16697   11 years tbretz Fixed the missing ')'
(edit) @16696   11 years tbretz Ignore non finite values. This can happen if a board is diabled and ...
(edit) @16695   11 years tbretz The timing was not yet correct
Note: See TracRevisionLog for help on using the revision log.