source: trunk/FACT++

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @18052   10 years tbretz My gcc version needs unistd for usleep
(edit) @18051   10 years tbretz Added spaces as required by new C++11 compilers
(edit) @18050   10 years tbretz Added some spaces as requested by newer C++11 implementations.
(edit) @18048   10 years Daniela Dorner added ratescan type
(edit) @18047   10 years Daniela Dorner added RATESCAN2
(edit) @18046   10 years Daniela Dorner added checks for new options, fixed bug in ra/dec check
(edit) @18045   10 years Daniela Dorner changed column names of the table Measurement for consistency when ...
(edit) @18044   10 years tbretz If only have of the schedule is trasmitted, also the first entry must ...
(edit) @18036   10 years Daniela Dorner updated limits when temperatures are set to 0 to 970 and 1300
(edit) @18034   10 years Daniela Dorner updated institute list and added institute moon
(edit) @18016   10 years dneise initial commit of script, to take a closed lid ratescan
(edit) @17959   10 years tbretz Make use of new central current prediction.
(edit) @17958   10 years tbretz A small simplification (the vector isn't really needed)
(edit) @17957   10 years tbretz Make use of new central current prediction.
(edit) @17953   10 years tbretz Make use of the new central current prediction.
(edit) @17950   10 years tbretz Updated the threshold curve according to the latest measurement in the ...
(edit) @17947   10 years tbretz Fixed a typo.
(edit) @17942   10 years tbretz Fixed a bug which caused clicking on an entry in the autocomplete list ...
(edit) @17941   10 years tbretz Upper case column names; some imporvements to output.
(edit) @17940   10 years tbretz Better formatting for sqm numbers.
(edit) @17939   10 years tbretz Reverting to last revision.
(edit) @17938   10 years tbretz Better formatting for sqm numbers.
(edit) @17937   10 years tbretz Fixed a typo
(edit) @17936   10 years tbretz
(edit) @17935   10 years tbretz Added sqmctrl
(edit) @17934   10 years tbretz Added sqmctrl
(edit) @17932   10 years tbretz Revived the valid state; make sure the first message (which might ...
(edit) @17931   10 years tbretz A 1.5 times timeout interval for receiving reports is enough.
(edit) @17930   10 years tbretz More precise time interval for convenience
(edit) @17929   10 years tbretz It seems that the SQM does not allow asynchronous connections ...
(edit) @17928   10 years tbretz Error codes are not displayed anymore by the browser, fixed that by ...
(edit) @17927   10 years tbretz Added a timeout to checkStates
(edit) @17926   10 years tbretz Added handling for Critical and OnStandby status of feedback.
(edit) @17925   10 years tbretz Reverting to last revision.
(edit) @17924   10 years tbretz Reverting to last revision.
(edit) @17923   10 years tbretz Reverting to last revision.
(edit) @17922   10 years tbretz Added EVENT_SERVER and SQM_CONTROL; fixed a typo; close lid at startup.
(edit) @17921   10 years tbretz Added a timeout for checkStates
(edit) @17920   10 years tbretz Added NotReady and Ready
(edit) @17919   10 years tbretz Added OnStandby, Warning and Critical.
(edit) @17918   10 years tbretz First version of the control for the sky quality meter.
(edit) @17917   10 years tbretz Added a virtual function which allows the derived class to handle if a ...
(edit) @17916   10 years tbretz Start a new connection attempt if connection has failed.
(edit) @17884   10 years tbretz Fixed a compiler issue.
(edit) @17883   10 years tbretz Added an autoamtic reconnect if the received stream is broken.
(edit) @17882   10 years tbretz Disabled the second broken Humidity sensor.
(edit) @17856   11 years tbretz Added the possibility to retrieve different file names in the ...
(edit) @17852   11 years tbretz Take pixels above maximum out of image parameter calculation; changed ...
(edit) @17851   11 years tbretz Some updated to get it properly working.
(edit) @17848   11 years tbretz Reordered the elements in the display.
(edit) @17847   11 years tbretz Added some information on MC data.
(edit) @17843   11 years tbretz Fixed/simplified width/length/disp calculation by applying the scale ...
(edit) @17841   11 years tbretz Adapted to the new MC files and paths.
(edit) @17840   11 years tbretz Some updates to the CodeMirror colorizer.
(edit) @17838   11 years tbretz No fading for tooltip - hopefully this solves the 'maximum stack ...
(edit) @17825   11 years tbretz Reset the event to 0 when a new file is opened. That was ...
(edit) @17824   11 years tbretz Some layout improrvements around the checkboxes for the run type.
(edit) @17823   11 years tbretz The MC checkbox was not yet properly handled.
(edit) @17822   11 years tbretz Added isMC, isDRS and isCalibrated
(edit) @17821   11 years tbretz Make it easier to debug printing the executed command.
(edit) @17820   11 years tbretz Added support for reading DRS calibration constants and Monte Carlo files.
(edit) @17819   11 years tbretz Added support to display the DRS calibration constants and Monte Carlo ...
(edit) @17818   11 years tbretz Return drs files and MC files as well, compile the path properly.
(edit) @17817   11 years tbretz Some small layout improvements; added the MC checkbox and the Drs checkbox.
(edit) @17816   11 years tbretz Switch CodeMirror theme to our own theme; some improvements in the ...
(edit) @17815   11 years tbretz Added CodeMirror theme.
(edit) @17814   11 years tbretz Some small layout improevemnts; added Grid-checkbox
(edit) @17813   11 years tbretz Remove the carriage return from returned editor contents ;)
(edit) @17812   11 years tbretz Allow gaps in the returned array of arrays; null is interpreted as 0 - ...
(edit) @17811   11 years tbretz Minor optimizations.
(edit) @17810   11 years tbretz Recalculate the image parameters with each redraw to allow to use the ...
(edit) @17808   11 years tbretz Added debug for caluclation time and removed the second loop from the ...
(edit) @17807   11 years tbretz Added a checkbox for displaying the image and a help text for the ...
(edit) @17806   11 years tbretz Forgot to remove the debug output
(edit) @17805   11 years tbretz Implemented the calculation of the basic image paremeters and the ...
(edit) @17800   11 years tbretz It is nicer to have teh distance between two neighbors as 1. ...
(edit) @17799   11 years tbretz Removed conversion factor. Calculate geometry in degree instead.
(edit) @17798   11 years tbretz Updated help text
(edit) @17797   11 years tbretz Fixed the calculation of the geometry; added $.conv
(edit) @17796   11 years tbretz Make sure image is on top during movement; remove zindex again afterwards
(edit) @17793   11 years tbretz Now as JS code in internal.js
(edit) @17792   11 years tbretz Neighbors is not used anymore. A JS array will be faster than a php ...
(edit) @17791   11 years tbretz Code which is executed before proc and main.
(edit) @17790   11 years tbretz Added $.geom and $.map
(edit) @17789   11 years tbretz Some updates to the time calculation (more accurate position); check ...
(edit) @17788   11 years tbretz Simplified getIndex (now using the coordinate array)
(edit) @17775   11 years tbretz unified the tooltip functions.
(edit) @17774   11 years tbretz Added the possibility to access calibrated data files.
(edit) @17773   11 years tbretz Added the container needed to display the histograms. It is more or ...
(edit) @17772   11 years tbretz Added the possibility to load calibrated files, added a slider with ...
(edit) @17771   11 years tbretz An interface to access the fits raw data files and get an event in as ...
(edit) @17746   11 years tbretz Fixed an issue when the slected pixel had no value attached; some ...
(edit) @17745   11 years tbretz There is no need to send the neighbors with the output; trim the null ...
(edit) @17744   11 years tbretz Performance improvement in the example.
(edit) @17742   11 years tbretz Updated codemirror config; automatically colorize code snippets
(edit) @17741   11 years tbretz Added style for match highlighting.
(edit) @17740   11 years tbretz Switch to strict mode.
(edit) @17739   11 years tbretz Use Codemirror colorized for code snippets in the help text; ...
(edit) @17738   11 years tbretz Added xmin and xmax controls for the waveform.
(edit) @17732   11 years tbretz Added another accordion for the display of additional controls; ...
Note: See TracRevisionLog for help on using the revision log.