Timeline
08/05/11:
- 23:02 Changeset [11804] by
- Replaced a rounded value for the hex coordinates by the analytical value.
- 22:48 Changeset [11803] by
- Fixed text displayed in CameraMouseMove
- 21:27 Changeset [11802] by
- Added persistant raw data display mode.
- 18:44 Changeset [11801] by
- hex: v214; dec: v220. FAD operates with socket 0 and 1 only. (TX MEM 60kb)
- 16:39 Changeset [11800] by
- removed echo of ethernat command 'm'
- 16:33 Changeset [11799] by
- removed the emitting cout
- 16:26 Changeset [11798] by
- Reordered some code to get rid of some root warnings.
- 16:26 Changeset [11797] by
- Changed the name of the tab 'Page'; fixed warning in promotion of the new widgets.
- 16:19 Changeset [11796] by
- added tooltip for all cameras
- 16:00 Changeset [11795] by
- debugged channel 0 bug.
- 15:09 Changeset [11794] by
- Fixed the division by fPrescaling when calculating the rates.
- 15:08 Changeset [11793] by
- Added new GUI classes to be compiled -- still needs a proper check for GL/GLU
- 15:08 Changeset [11792] by
- Added new GUI classes to be compiled -- still needs a proper check for GL/GLU
- 15:07 Changeset [11791] by
- Added 'light-puler' run-type.
- 15:07 Changeset [11790] by
- Fixed an FTU-GUI ping pong
- 14:19 Changeset [11789] by
- test to get rid of voltage channel 0 error.
- 14:12 Changeset [11788] by
- multiple changes ... chaos.
- 14:10 Changeset [11787] by
- set W5300 SPI clock freq to F_CPU/128. Since sometimes the W5300 interface seems not to work, when the Programming adapter is connected to the camere, this *might* help.
- 14:08 Changeset [11786] by
- added update of display when data changed
- 13:48 Changeset [11785] by
- the previous bug fix was not quite a fix ;)
- 13:32 Changeset [11784] by
- Fixed settings for light pulser.
- 13:24 Changeset [11783] by
- fixed a bug with the GL camera
- 13:07 Changeset [11782] by
- replaced the 4 roots cameras by 4 GL ones
- 12:27 Changeset [11781] by
- Default voltages now given per bias channel
- 12:07 Changeset [11780] by
- small changes in buttons and pulldown layout
- 10:47 Changeset [11779] by
- Replaced root camera by openGL camera in the gui
08/04/11:
- 20:51 Changeset [11778] by
- Decrease update frequency for Event display; Set a better maximum for the raw data display.
- 20:07 Changeset [11777] by
- Added options to set N/4 threshold; renamed options for thresholds.
- 20:06 Changeset [11776] by
- Reformating of the clock conditioner values.
- 18:28 Changeset [11775] by
- Added some more user commands.
- 18:25 Changeset [11774] by
- Fixed the default for fNumGain
- 13:23 Changeset [11773] by
- Fix for reset button detection
- 12:44 Changeset [11772] by
- Added 'info' option for 'pixel' and 'channel' commands
- 11:20 Changeset [11771] by
- key2 can be empty now
- 09:09 Changeset [11770] by
- removed bug in nc_format. wrongly used pointer to piinter nc_format_buffer.
08/03/11:
- 22:06 Changeset [11769] by
- Throw exceptions with text; do not use stoi otherwise we have to catch the exception.
- 22:05 Changeset [11768] by
- Send the 2000/4096 also as default gain.
- 22:04 Changeset [11767] by
- Apply the correct 2000/4096 also as default gain.
- 21:00 Changeset [11766] by
- Latest changes.
- 20:16 Changeset [11765] by
- Fixed the missing color for the horizontal histograms in the Raw data tab.
- 20:16 Changeset [11764] by
- Fixed the missing color for the horizontal histograms in the Raw data tab.
- 20:02 Changeset [11763] by
- Fixed the broken format of STATIC_DATA
- 19:58 Changeset [11762] by
- Sanity check for fInHandler when sending new light pulser intensity
- 19:57 Changeset [11761] by
- Fixed the light pulser control (DimStaticData)
- 19:06 Changeset [11760] by
- Print light pulser settings.
- 18:18 Changeset [11759] by
- Added new DATA_EVENT display.
- 18:17 Changeset [11758] by
- Renamed EVENT_DATA to RAW_EVENT; added new EVENT_DATA
- 18:14 Changeset [11757] by
- version 0x02.13: send data via socket 1 only. sockets 2..7 should be open as usual.
- 18:02 Changeset [11756] by
- bitfiles are now versioned as well
- 17:51 Changeset [11755] by
- reinit of this svn repos .... it was all too messy deleted the old folders and restarted with FACT_FAD_lib only. (well and the testbenches)
- 15:07 Changeset [11754] by
- Added GetPixelStats and changed type of scalerel from uint32 to uint64
- 14:21 Changeset [11753] by
- added display of calibrated data
- 10:18 Changeset [11752] by
- Changed artificial 0.5 to corect scale 2000/4096
08/02/11:
- 20:49 Changeset [11751] by
- Added the missing factor 0.5 to convert ADC counts to rough mV
- 20:34 Changeset [11750] by
- Added Errors in EVENT header.
- 20:32 Changeset [11749] by
- Removed some stray output.
- 20:32 Changeset [11748] by
- Latest updates.
- 20:32 Changeset [11747] by
- Added runNr to eventCheck; added stub for subProcEvt
- 20:23 Changeset [11746] by
- Removed some stray debug output.
- 20:23 Changeset [11745] by
- Changed some argument types to match the huge range needed by the gain and the secondary baseline.
- 20:21 Changeset [11744] by
- Set fNumRows to 0 in OpenFile; added ResetColumns function
- 20:20 Changeset [11743] by
- Initialize fConv to 0.
- 20:20 Changeset [11742] by
- changed some variable types to match the big range needed for the gain and secondary baseline.
- 20:19 Changeset [11741] by
- Fixed scale for gain and secondaroy offset; increase fStep after Close(); changed some variable types to match the big range needed for the gain and secondary baseline.
- 15:43 Changeset [11740] by
- improved zooming and bug fix of raw events viewer
- 15:05 Changeset [11739] by
- Fixed Dim format for STATIC_DATA
- 14:47 Changeset [11738] by
07/31/11:
- 20:01 Changeset [11737] by
- Some updates to the package list.
- 19:59 Changeset [11736] by
- Added some comments.
- 13:13 Changeset [11735] by
- If we are already at the end of the stream return a default rather than try to analyze the stream further.
- 13:02 Changeset [11734] by
- If we are already at the end of the stream return a default rather than try to analyze the stream further.
- 12:04 Changeset [11733] by
- Move dimInfo in the service list at the last position to ensure that it is destroyed first; adapted arguments of RemoveService.
- 12:03 Changeset [11732] by
- Added a check to make sure that the next run is not started while the previous is still processing.
- 12:03 Changeset [11731] by
- Removed DimTriggerCounter; added DimTreiggerRates
- 12:02 Changeset [11730] by
- When removing something from a list we have to pass a copy instead of a reference otherwise the removal might remove the source of the reference.
07/30/11:
- 20:13 Changeset [11729] by
- Changed definitions in a way that forward declarations of the structs will work.
- 20:13 Changeset [11728] by
- Do not split DrsCalib.h until it is unified with MARS.
- 20:08 Changeset [11727] by
- Added the new files for the data processors.
- 20:08 Changeset [11726] by
- 20:07 Changeset [11725] by
- Renamed the data processors and moved them to their own files.
- 16:16 Changeset [11724] by
- Updated.
- 16:15 Changeset [11723] by
- Fixed a bug when iterators point to empty lists.
- 16:15 Changeset [11722] by
- 16:14 Changeset [11721] by
- Added checks for Qwt
- 16:14 Changeset [11720] by
- Move QT4_INCLUDES to configure.ac; added the new FitsFile class.
- 16:12 Changeset [11719] by
- Adapted to the changed in FitsFile; encapsulated fServiceSubscriptions.clear() in the destructor by a dim_lock/unlock. This is not a final solution, but currently the best one.
- 16:10 Changeset [11718] by
- Fixed a typo and make sure that the buffer doesn't overflow if the data cannot be sent fast enough.
- 16:10 Changeset [11717] by
- Fixed the memset in GetSampleStats.
- 16:09 Changeset [11716] by
- Make use of the new FitsFile class.
- 16:08 Changeset [11715] by
- Implemented using the new class FitsFile to write raw data and to write a file with the DRS calibration results.
- 16:07 Changeset [11714] by
- Enabled regular call of RootUpdate, by calling DisplatchOneEvent instead of ProcessEvents the CPU usage is kept low, but the response time is better.
- 16:04 Changeset [11713] by
- Fixed a problem in RemoveAllServers - it must be made sure that the reference given to RemoveServer is not deleted during usage.
- 16:04 Changeset [11712] by
- Added function to return the FormatList suitable for CCfits.
07/29/11:
- 21:11 Changeset [11711] by
- Fixed a bug when the END tag was the first in a block
- 18:10 Changeset [11710] by
- Added libConfiguration.la to viwer.
- 18:08 Changeset [11709] by
- Display the received light-pulser settings.
- 18:08 Changeset [11708] by
- Added light-pulser settings to the DimStaticData structure.
- 18:07 Changeset [11707] by
- Fixed some misspelled commands; removed the stray Fad from the light-pulser widgets.
- 18:07 Changeset [11706] by
- Removed the stray Fad from the light-pulser widgets.
- 18:06 Changeset [11705] by
- Added some ifdef to make it compile with Qwt 5.2; little change to the program options (so they are easier to be used in a file; made --file the first positional argument; fixed the include path to Coonfiguration.h
- 16:35 Changeset [11704] by
- replace histograms by curves drawn by myself
- 15:50 Changeset [11703] by
- Added a nother check to help debugging whether the FITS header description matches the EVENT structure
- 15:49 Changeset [11702] by
- Added GetSize() memember function and return this value in case of errors.
- 14:32 Changeset [11701] by
- Display the result of the DRS calibration.
- 14:31 Changeset [11700] by
- Send the result of the DRS calibration to the GUI.
- 14:31 Changeset [11699] by
- Added a new function GetSampleStats which directly writes into an array o floats.
- 14:30 Changeset [11698] by
- Fixed a bug in the name of the slots for the light pulse intensity.
- 13:51 Changeset [11697] by
- version 0.2 of the raw events viewer
- 10:24 Changeset [11696] by
- the changes we made with thomas B did not work. I have to find out why... only crap is send away now.
- 09:54 Changeset [11695] by
- Updated from dim_v19r22 to dim_v19r23
07/28/11:
- 15:20 Changeset [11694] by
- Renamed FTM buttons.
- 15:13 Changeset [11693] by
- Changed title for ADC tab.
- 15:09 Changeset [11692] by
- Added trigger number to GUI.
- 15:04 Changeset [11691] by
- Added Light Pulser commands.
- 14:36 Changeset [11690] by
- Renamed 'StartCell' to 'StartCellData'
- 14:33 Changeset [11689] by
- Added latest changes in the EventBuilder; consequently added TriggerNum and NumBoards to Event Header in FITS.
- 14:27 Changeset [11688] by
- Scale calibrated data to 1000mV
- 14:20 Changeset [11687] by
- Fixed default case of Drs calibration.
- 14:14 Changeset [11686] by
- Don't divide ADC signal by by two, this is now done in the Drs Calibration procedure; fixed ADC AutoScale
- 14:13 Changeset [11685] by
- Added Update of event display in caseof change of chip id.
- 11:47 Changeset [11684] by
- Send Event data as floats.
- 11:47 Changeset [11683] by
- Added functions to calculate result in floating points.
- 11:32 Changeset [11682] by
- Added radio buttons for different scaling methods in ADC tab.
- 09:55 Changeset [11681] by
- removed minor typos
- 09:16 Changeset [11680] by
- Added a missing array index in the new code
- 09:14 Changeset [11679] by
- 09:14 Changeset [11678] by
- To be unified with the code in MARS.
- 09:13 Changeset [11677] by
- Added new fake-file DataFileCalib for DRS calibration.
- 09:13 Changeset [11676] by
- Added file format 4 for DRS calibration.
07/27/11:
- 21:12 Changeset [11675] by
- Added Channel/Chip to ADC tab
- 21:02 Changeset [11674] by
- Switch off backlog for ConsoleStream per default.
- 21:02 Changeset [11673] by
- Added 'no-dim' option to make boost happy; added function to convert PT1000 data to temperatures (~1% rms)
- 20:21 Changeset [11672] by
- Changed CBC on ADT tab to CBCC
- 20:16 Changeset [11671] by
- Fixed a bug in nc_format - nc_format_buffer is already the pointer and can be used directly. The address of it just points somewhere into the memory.
- 20:14 Changeset [11670] by
- Simplified writing into ring-buffer by using modulo operator.
- 19:34 Changeset [11669] by
- Fixed a possible dead lock in eth_write_*
- 19:03 Changeset [11668] by
- 18:57 Changeset [11667] by
- 18:57 Changeset [11666] by
- 17:16 Changeset [11665] by
- Added fState to DimDynamicData
- 17:16 Changeset [11664] by
- Added locked state to states.
- 17:15 Changeset [11663] by
- Output fState from header.
- 17:15 Changeset [11662] by
- Added header.fState to dynamic data.
- 17:15 Changeset [11661] by
- Added locked status for clock conditioner.
- 17:14 Changeset [11660] by
- FTM status states newly defined
- 17:14 Changeset [11659] by
- Added clock conditioner LED for locked status.
- 16:33 Changeset [11658] by
- 16:27 Changeset [11657] by
- Fixed temperatures provided by FAD.
- 16:24 Changeset [11656] by
- 16:23 Changeset [11655] by
- fixed the board time display in the ADC tab.
- 16:18 Changeset [11654] by
- two new status states introduced for FTM to indicate lock status of clock conditioner
- 15:43 Changeset [11653] by
- clock cond interface with PLL lock seperate
- 15:37 Changeset [11652] by
- ftm_definition for firmware v 4
- 14:03 Changeset [11651] by
- Renamed TriggerId to TriggerCounter
- 12:43 Changeset [11650] by
- removed warning messages
- 12:23 Changeset [11649] by
- Addes epcial pixel color for under- and overflow.
- 11:55 Changeset [11648] by
- clock cond interface, new settings loaded only when changed
- 10:18 Changeset [11647] by
- Allow negative values in diable other patches.
- 10:17 Changeset [11646] by
- Fixed cases in which fThresholdIdx can be negative ('all')
- 10:17 Changeset [11645] by
- Fixed a typo.
- 10:07 Changeset [11644] by
- Fixed a bug in SetThreshold.
- 09:28 Changeset [11643] by
- Implemented setting min/max for color scale in rate tab
- 08:56 Changeset [11642] by
- removed references to Mars
- 08:44 Changeset [11641] by
- Enabled the possibility to choose a pixel and a patch even taking data.
- 08:40 Changeset [11640] by
- Added group box around FTU rate controls.
- 08:32 Changeset [11639] by
- Changed number of allowed channels from 9 to 36
- 08:24 Changeset [11638] by
- Set busy-off to normal and configure all DACs
07/26/11:
- 23:49 Changeset [11637] by
- Artificially increased the size of the refclock widet of the FAD tab to display the unit properly.
- 23:45 Changeset [11636] by
- SET_DAC_VALUE expectes two int not two short.
- 23:43 Changeset [11635] by
- Added services and gui elements for FAD DAC values.
- 22:12 Changeset [11634] by
- Fixed index when setting thresholds in EvealOptions
- 21:30 Changeset [11633] by
- Fixed a double dot when checking the trigger options.
- 21:19 Changeset [11632] by
- Renamed continous busy to constant busy.
- 21:17 Changeset [11631] by
- Added some stuff for the new event viewer.
- 21:09 Changeset [11630] by
- Added program options to set the DAC of the trheshold values.
- 21:05 Changeset [11629] by
- Added busy on bit.
- 21:03 Changeset [11628] by
- Added new definitions for busy on.
- 21:03 Changeset [11627] by
- Split ENABLE_BUSY into ENABLE_BUSY_ON/_OFF
- 21:02 Changeset [11626] by
- Added new busy on bit to header output.
- 21:02 Changeset [11625] by
- Added new Busy on bit to fad output.
- 21:01 Changeset [11624] by
- Added new Busy on command.
- 21:01 Changeset [11623] by
- Added new BusyOn signal to FAD; some layout improvements
- 17:42 Changeset [11622] by
- Added checks for GL, GLU and QtOpenGL
- 15:58 Changeset [11621] by
- added run number distribution check
- 15:37 Changeset [11620] by
- Updated output at the end of configure.
- 15:32 Changeset [11619] by
- Added more log output.
- 15:27 Changeset [11618] by
- First draft of compiling the raw events viewer.
- 15:26 Changeset [11617] by
- Renamed MFits to fits; removed wrong ifdef
- 15:23 Changeset [11616] by
- Changed from using MFits.h to new fits.h in Mars trunk.
- 13:34 Changeset [11615] by
- Added check for libz.
- 13:21 Changeset [11614] by
- 13:18 Changeset [11613] by
- Renamed in order to allow the use of the existing Makefile
- 13:14 Changeset [11612] by
- Moved and renamed in order to be able to use the existing Makefile.
- 13:11 Changeset [11611] by
- Fixed AddEnv - should be 'host' not 'dns'
- 13:11 Changeset [11610] by
- Made switching on and off of widgets more userfriendly in the FTU tab
- 13:01 Changeset [11609] by
- Updated allowed states.
- 12:56 Changeset [11608] by
- Added initialization for fTimeStamp1, fTimeStamp0 and fTriggerCounter0
- 12:42 Changeset [11607] by
- Enable sending at least the roi checked by the event builder by DIM; Removed the other event checks for the time being
- 11:40 Changeset [11606] by
- Added SET_TRIGGER_RATE command to GUUI.
- 11:26 Changeset [11605] by
- Changed the definition of min/max in Compare so that it is compatible with FwVersion; added some TODO outputs; removed some unsused variables in function calls
- 11:26 Changeset [11604] by
- possible fix for bad run file name
- 11:25 Changeset [11603] by
- Added roiTM to EVENT header.
- 11:23 Changeset [11602] by
- Output time with fixed three digits after the point.
- 11:08 Changeset [11601] by
- 11:02 Changeset [11600] by
- added user to displayed table
- 10:51 Changeset [11599] by
- added various new features (min, max, user, show/hide of columns, ...) and changed layout
- 10:50 Changeset [11598] by
- added ldap user authentication (not yet enabled)
- 10:49 Changeset [11597] by
- added (functions for ldap-authentication)
- 10:47 Changeset [11596] by
- added (explanations to be displayed)
- 10:23 Changeset [11595] by
- Automatically enable all FTUs.
- 10:22 Changeset [11594] by
- Implemented the correct database query.
- 10:22 Changeset [11593] by
- Used a fixed-length type for the Dim reports.
- 10:21 Changeset [11592] by
- Added fMcpReset.
- 10:21 Changeset [11591] by
- Fixed min/max case for FwVersion
- 10:20 Changeset [11590] by
- Added MCP 'Reset' button.
07/25/11:
- 20:28 Changeset [11589] by
- delete should be delete[]
- 19:15 Changeset [11588] by
- Do not send single trigger by default in configuration - needs some delay; enable busy to ensure consistency
- 19:14 Changeset [11587] by
- Allow RESET in Configuring3; do not disable trigger line before ftm trigger is not disabled.
- 13:44 Changeset [11586] by
- Added a fix when calling option_description::match for older boost versions.
- 13:21 Changeset [11585] by
- Added libDimExtension.la to chatclient.
- 13:02 Changeset [11584] by
- Fixed 'Connecting' status when thread is not running and sockdef!=0.
- 12:20 Changeset [11583] by
- Removed a stray #
- 12:18 Changeset [11582] by
- The EVENT structure now gives the RoiTM
07/24/11:
- 22:47 Changeset [11581] by
- Removed unintentionally comitted debug output.
- 22:34 Changeset [11580] by
- Added --null option to suppress the output more or less completely.
- 21:41 Changeset [11579] by
- Added some descriptions for program options.
- 21:20 Changeset [11578] by
- Moved some part of the initialization from main to Configure::DoParse
- 21:11 Changeset [11577] by
- Moved Dim:Setup to Main::execute
- 21:11 Changeset [11576] by
- Added host option.
- 21:00 Changeset [11575] by
- Moved common option setup to Main.h; created Main namespace
- 20:43 Changeset [11574] by
- Added the possibility to setup DIM_HOST_NODE with the --host program option.
- 20:21 Changeset [11573] by
- Do not return the full path in UnLibToolize if it is the local path; fixed this case for fact++.rc
- 18:37 Changeset [11572] by
- Latest changes.
- 18:37 Changeset [11571] by
- Latest changes.
- 18:36 Changeset [11570] by
- Don't print the header contents by default.
- 18:36 Changeset [11569] by
- removed some obsolete calls to Format(); correctly display the relative and absolute error
- 18:33 Changeset [11568] by
- Changed fHiGainFirst/fHiGainLast from Byte_t to UShort_t to support the DRS with 1024 samples.
- 18:29 Changeset [11567] by
- Do not propagate non finite numbers.
- 18:23 Changeset [11566] by
- Fixed header output.
- 17:52 Changeset [11565] by
- Automatically initialize the Converter from the defined FITS format.
- 17:51 Changeset [11564] by
- Added a function to allow the COnverter to be fed with FITS format data: ToFormat
- 12:34 Changeset [11563] by
- Added support for the light pulser settings; changed most option names.
- 12:15 Changeset [11562] by
- Added latest changes.
- 12:15 Changeset [11561] by
- Added HAVE_ZLIB
- 12:14 Changeset [11560] by
- Fixed check for SIMPLE; added HAVE_ZLIB support.
- 11:09 Changeset [11559] by
- Removed MZlib, MFits; added izstream, fits
- 11:08 Changeset [11558] by
- Fixed an ifsef in GetObjectInfo
- 11:07 Changeset [11557] by
- Added exceptions if supported by the compiler; removed check for TELESCOP keyword
- 11:05 Changeset [11556] by
- Replaced MZlib by izstream; added check for TELESCOP key.
- 11:04 Changeset [11555] by
- added fIsSigned; adapted GetSample; added GetMin; changed code in GetMax
- 11:02 Changeset [11554] by
- Added fIsSigned data memeber; increased version number.
- 11:01 Changeset [11553] by
- Replaced MZlib with izstream
- 10:52 Changeset [11552] by
- 10:51 Changeset [11551] by
- Moved all the source code to the header; set the fail and bad bit more properly.
- 10:49 Changeset [11550] by
- 10:49 Changeset [11549] by
07/22/11:
- 23:12 Changeset [11548] by
- New widget should show evt/s rather than evts
- 23:02 Changeset [11547] by
- Added new members to GUI_STAT
- 23:01 Changeset [11546] by
- Added new members to GUI_STAT
- 23:01 Changeset [11545] by
- Added new maxEvt support.
- 23:00 Changeset [11544] by
- Exchanged wrong fDenable and fDwrite in Configure
- 22:39 Changeset [11543] by
- Fixed FAD temperature min/max display.
- 22:39 Changeset [11542] by
- Replaced BOARDID in fits header by just id (BOARDID is too long); made error messages compile again; another fix to fix the temperature min/max transmission
- 17:10 Changeset [11541] by
- FTM IP changed
- 16:18 Changeset [11540] by
- added raw events viewer code
- 13:05 Changeset [11539] by
- Another fix to fix the min/max temperatures
- 11:19 Changeset [11538] by
- Added the variables for the light pulser settings in StaticData
- 11:18 Changeset [11537] by
- Fixed once more the temperature compilation for the FADs; removed the Fatal and Error messages which were for debugging; unified some error messages.
- 11:17 Changeset [11536] by
- Fixed a typo; added some stuff for the light pulser setup
- 08:53 Changeset [11535] by
- Unified funtions to open an ofstream into a single function; unified some output texts in case of failure; return error from EvalOptions if log file could not be opened; use DimWriteStatistics::GetFileSizeOnDisk to replace GetFileSize code
- 08:50 Changeset [11534] by
- Changed GetFileSizeOnDisk to be static so it can be accessed from the outside.
- 08:50 Changeset [11533] by
- Optimized event creation.
- 08:49 Changeset [11532] by
- Changed fExpectedRuns to keep target configuration; added NumBoards and reserved to FITS.
- 08:48 Changeset [11531] by
- Propagate target configuration to EventBuilderWrapper.
- 08:48 Changeset [11530] by
- Flush the output during startup immediately.
- 08:48 Changeset [11529] by
- Added getter for fNullOUtput and fEnableBacklog
- 08:46 Changeset [11528] by
- Replace a v6 loopback address by a v4 loopback address; we do not support v6.
- 08:46 Changeset [11527] by
- Added operator!= to Header
- 08:45 Changeset [11526] by
- Moved output to Setup function; changed output contents; return localhost if none was detected.
- 08:45 Changeset [11525] by
- Added kCmdConfigFTU as a stub.
- 08:44 Changeset [11524] by
- Write now takes a const reference
- 08:44 Changeset [11523] by
- Fixed FadResetTriggerId
07/21/11:
- 18:37 Changeset [11522] by
- Fixed format of fDimStatistics1.
- 18:34 Changeset [11521] by
- folgende bug-fixes sind drin: - gotNewRun sollte jetzt immer sofort kommen - usdMem / maxMem sollte jetzt richtig gesetzt werden - open run 0 sollte nicht mehr auftreten (fuer das erste event) Neu implementiert: - falsche ROI werden nicht mehr akzeptiert; die ROI wird jeweils festgelegt durch das erste gelesenen board des ersten events eines neuen runs. Muss gelten: die ersten 8 pixel muessen identische ROI haben, Pixel 9 muss roi >= roi0 sein ( > wenn noch TM info dabei ist) mehrere zaehler werden neu an factStat uebergeben: int32_t badRoiE; //# boards with wrong roi (inconsistent in event) int32_t badRoiR; //# boards with wrong roi (inconsistent in run) int32_t badRoiB; //# boards with wrong roi (inconsistent in board) int32_t badRoi[NBOARDS]; //# wrong roi per board - RUN_HEAD enthaelt neu: uint16_t NroiTM; // <=0 wenn keine TM info da ist // (aber in event-structure ist leere TM drin...) - EVENT enthaelt neu: uint32_t NumBoards ; // number of active boards included // <40 fuer incomplete events
- 17:44 Changeset [11520] by
- Request static data instead of just the register.
- 17:36 Changeset [11519] by
- Added new command to configure a single FTU and use this in SetThreshold and in EnablePixel.
- 13:28 Changeset [11518] by
- Fixed includes for g++ 4.5.2
- 13:27 Changeset [11517] by
- Explicit conversion of function to bool needed for newer g++
- 13:26 Changeset [11516] by
- Removed some arguments to suppress compiler warnings.
- 12:40 Changeset [11515] by
- Added special pixel 1438 and 1439.
- 12:30 Changeset [11514] by
- FTM: changeover to firmware ID 3
- 12:14 Changeset [11513] by
- lightpulser interface modified to reduce LED current and light output
- 12:13 Changeset [11512] by
- Made mcp be compiled by default.
- 12:11 Changeset [11511] by
- Updated to latest version of event builder.
- 12:04 Changeset [11510] by
- improvements to pulse simulation - needs optimization.
- 12:03 Changeset [11509] by
- send STOP_RUN instead of STOP to FTM.
- 12:02 Changeset [11508] by
- Fixed the QVariant value in fMcpNumEvents
- 12:01 Changeset [11507] by
- Fixed a name.
- 11:30 Changeset [11506] by
- added index.html for this webinterface
- 11:24 Changeset [11505] by
- added plenty of new features to view and edit the configuration database
- 11:21 Changeset [11504] by
- added (interface to view configuration db)
- 11:20 Changeset [11503] by
- added (script to get timestamp from database)
- 11:20 Changeset [11502] by
- added (script to get pulldown with date)
- 11:19 Changeset [11501] by
- added (script to get pulldown with programs)
- 09:31 Changeset [11500] by
- fixed a bug related to bad services formatting
07/20/11:
- 20:20 Changeset [11499] by
- Propagate the maximum number of events and the maximum run-type together with the run-type when configuring/starting a run.
- 20:20 Changeset [11498] by
- Propagate the maximum number of events and the maximum run-type together with the run-type when configuring/starting a run.
- 20:19 Changeset [11497] by
- Added preliminary widgets for starting runs from the GUI.
- 18:49 Changeset [11496] by
- Optimized ToFits according to the result of the optimization of the MFits reader.
- 18:36 Changeset [11495] by
- Fixed a minor compiler issue from last commit.
- 18:10 Changeset [11494] by
- Added some code to stop the ftm and the fads.
- 18:10 Changeset [11493] by
- Receive the trigger id from the ftm; added gauss pulses in case the data was triggered from the ftm.
- 18:09 Changeset [11492] by
- Send the trigger id with the trigger.
- 18:04 Changeset [11491] by
- Latest changes.
- 18:03 Changeset [11490] by
- Replaced fPCTime by a two byte buffer and init full time; added StartCell to reading.
- 18:01 Changeset [11489] by
- Added fStartCells and increased version number
- 18:00 Changeset [11488] by
- Added iterator to start cell.
- 17:58 Changeset [11487] by
- Optimized reverse copy procedure; added HasKey
- 17:57 Changeset [11486] by
- Added support for FITS files in readdaq.
- 14:54 Changeset [11485] by
- FTM firmware features now the config_single_FTU command (to be tested); also some defaults were changed
- 10:27 Changeset [11484] by
- Added a specialized template of SendCommand, suitable to send a string
- 10:27 Changeset [11483] by
- Added a registry for wildcarded options to detect unaccessed options; for this EvalConfiguration(const Configuration&) has been changed to EvalOptions(Configuration&)
- 08:04 Changeset [11482] by
- Fixed a problem with stoi when the string was empty.
- 08:03 Changeset [11481] by
- Replaced boost::thread by std::thread and boost::bind by std::bind from the C++0x standard
07/19/11:
- 21:09 Changeset [11480] by
- Removed obsolete include.
- 21:03 Changeset [11479] by
- Replaces ato/atof by stoi/stof; replaced boost::lexical_cast by to_string
- 20:30 Changeset [11478] by
- Removed some obsolete include.
- 20:23 Changeset [11477] by
- Make use of Main.h
- 20:19 Changeset [11476] by
- Removed some obsolete includes.
- 20:19 Changeset [11475] by
- Added libDimExtension for drivectrl
- 20:18 Changeset [11474] by
- Removed some obsolete includes; made it compile again.
- 20:00 Changeset [11473] by
- Removed some obsolete includes.
- 19:55 Changeset [11472] by
- Replaced boost::thread by std::thread.
- 19:54 Changeset [11471] by
- Replaced boost::array by std::array
- 16:38 Changeset [11470] by
- Improved output.
- 16:37 Changeset [11469] by
- Fixed EnableAllPixels
- 16:37 Changeset [11468] by
- Only plot the created commands in debig mode.
- 16:37 Changeset [11467] by
- Replaced value by INT32_MAX; replaced StartPix with StartCell
- 16:36 Changeset [11466] by
- Improved random data.
- 16:35 Changeset [11465] by
- Fixed the expected size in the SetClockFrequency tab.
- 16:34 Changeset [11464] by
- Fixed some display in the ADC tab.
- 14:13 Changeset [11463] by
- added backlog of events and log without dim
- 12:33 Changeset [11462] by
- Fixed bug crashing raw data browser when connected to DIM
- 11:13 Changeset [11461] by
- Made also Entry public -- for newer root versions and moved ReadBlock down.
07/18/11:
- 17:52 Changeset [11460] by
- Latest changes.
- 17:51 Changeset [11459] by
- 17:50 Changeset [11458] by
- Fixed detection of erroneous trigger cell
- 17:50 Changeset [11457] by
- Added MRawFitsRead
- 17:49 Changeset [11456] by
- Read the first header already at preprocessing time so that at least some header is available.
- 17:49 Changeset [11455] by
- Crash when reducing number of boards in FADctrl fixed
- 17:48 Changeset [11454] by
- Fixed raplacing of extension and added fits as a valid extension.
- 17:47 Changeset [11453] by
- Use FITS reader instead of raw-reader if it is a FITS raw file.
- 17:46 Changeset [11452] by
- Added Getter for fCameraVersion
- 17:44 Changeset [11451] by
- Au^Cmatically use MGeomCamFACT if the run header says that it is a fact camera.
- 17:19 Changeset [11450] by
- Added some comments about FITS basic types.
- 17:18 Changeset [11449] by
- Improved some output.
- 16:50 Changeset [11448] by
- Added setter to init fact data and to set the format values.
- 16:49 Changeset [11447] by
- Added virtual function to initialize reading event data.
- 16:35 Changeset [11446] by
- Removed the debug values for maxevt and maxtime; removed two obsolete comment lines.
- 16:26 Changeset [11445] by
- Updated access to run-number and store it into fExpectedRuns instead of fStartedRuns; implemented setting of exipry time and maximum event numbers; replaced DimEventData with just EVENT; updated FITS writing
- 16:25 Changeset [11444] by
- Updated access to run-number.
- 16:24 Changeset [11443] by
- Latest updates.
- 16:23 Changeset [11442] by
- Replaced DimEventData by EVENT
- 16:22 Changeset [11441] by
- Write a proper FITS header; removed obsolete fMjdRef data member
- 14:41 Changeset [11440] by
- Added some comment.
- 14:40 Changeset [11439] by
- Added Iso() member function.
- 13:24 Changeset [11438] by
- Added MFits
- 13:23 Changeset [11437] by
- 13:21 Changeset [11436] by
- 13:20 Changeset [11435] by
- Further optimized seeking so that we always seek relative.
- 09:57 Changeset [11434] by
- Removed the need of fill_buffer
- 09:31 Changeset [11433] by
- There is no need to make the derivative from istream virtual.
- 09:30 Changeset [11432] by
- Added function DataMember which will return a pointer to a data member from the dictionary.
- 09:27 Changeset [11431] by
- Outsourced OpenFile and ReadRunHeader to their own funtions.
- 09:26 Changeset [11430] by
- Made ReadEvent and SkipEvent virtual.
- 09:25 Changeset [11429] by
- Added -D__MARS__ to AcLiC
- 09:24 Changeset [11428] by
- Included fstream
07/15/11:
- 15:47 Changeset [11427] by
- the upper bound of searching the maximum was wrong
- 15:46 Changeset [11426] by
- Added GaussProb2D
- 15:44 Changeset [11425] by
- Bug fix for previous trigger cell sanity check
- 15:43 Changeset [11424] by
- Fixed seeking in gzipped files; increased buffer size
- 15:26 Changeset [11423] by
- To be able to properly remobe the .libs also check the current path if filename is without path.
- 15:25 Changeset [11422] by
- Don't use just a single buffer for writing, it might become overwritten if a new event is added to the queue before the olf one was sent.
- 15:24 Changeset [11421] by
- Fall back from configured to connected as soon as the corresponding run has been opened.
- 15:23 Changeset [11420] by
- Added Prescaler stuff and goNewRun feature.
- 15:23 Changeset [11419] by
- Added prescaler stuff.
- 14:10 Changeset [11418] by
- Replaced the include of MessageDim with MessageImp
- 14:10 Changeset [11417] by
- Removed an obsolete comment block.
- 13:42 Changeset [11416] by
- Removed an obsolete bool.
- 13:40 Changeset [11415] by
- Added some const qualifiers.
- 12:12 Changeset [11414] by
- Added debugging for 'double signal' effect on FAD
- 07:44 Changeset [11413] by
- Fixed bug when changing displayed event scope channel too fast
07/14/11:
- 18:43 Changeset [11412] by
- Fixed a problem with a possible infinite loop in the display.
- 18:37 Changeset [11411] by
- 18:36 Changeset [11410] by
- Fixed a check which was always true.
- 18:35 Changeset [11409] by
- Some name change to get rid of some compiler warnings.
- 18:32 Changeset [11408] by
- Propagate argument to fThread.Run
- 18:32 Changeset [11407] by
- Some improvements to get rid of compiler warnnings.
- 12:15 Changeset [11406] by
- Open the log file right away if path given in configuration
- 11:42 Changeset [11405] by
- various improvements of the datalogger
- 09:22 Changeset [11404] by
- Added fact++.rc global configuration file.
- 09:01 Changeset [11403] by
- Use Vec instead of Get and make sure 'console' is not accessed if not available.
- 09:00 Changeset [11402] by
- Changed the default qos from kInfo to kMessage
- 08:59 Changeset [11401] by
- Do not output = if avlue is empty
- 08:59 Changeset [11400] by
- Do not output = if value is empty
- 08:58 Changeset [11399] by
- Added microseconds to time output.
- 08:58 Changeset [11398] by
- Added microseconds to time output.
- 08:58 Changeset [11397] by
- Made write public to be accessed from Main.h
- 08:57 Changeset [11396] by
- Adapted output to what we have now elsewhere.
- 08:57 Changeset [11395] by
- Set the Dim timestamp to the given time.
- 08:56 Changeset [11394] by
- Fixed a warning in SetTriggerRate
- 08:56 Changeset [11393] by
- Added Time_t()
- 08:55 Changeset [11392] by
- Added milliseconds to time output.
07/13/11:
- 23:28 Changeset [11391] by
- Added svn path as PACKAGE_URL
- 23:27 Changeset [11390] by
- Updated startup block
- 23:19 Changeset [11389] by
- UPdated startup block
- 23:09 Changeset [11388] by
- Added svn revision to output at startup.
- 22:44 Changeset [11387] by
- Added code to unify access to parsed options; added GetOptions
- 22:43 Changeset [11386] by
- Added output of a lot of information at startup.
- 20:02 Changeset [11385] by
- Board time published as DIM service, files written with permissions for OTHER
- 18:42 Changeset [11384] by
- 18:41 Changeset [11383] by
- Added dim libraries to fad and ftm; added mcp
- 18:41 Changeset [11382] by
- Added dim libraries to fad and ftm; added mcp
- 18:39 Changeset [11381] by
- Some changes to the way filenames are determined; made MessageImp a base class of DataFileImp for simplicity; redirect debug-out to console.
- 18:38 Changeset [11380] by
- Implemented sending triggers from the ftm to the fad via Dim.
- 18:37 Changeset [11379] by
- Updated the behaviour of the configure command; allow all possible values to be send as trigger rate; fixed increasing of the run-number when a new run is started.
- 18:36 Changeset [11378] by
- Updated the bahaviour of the CONFIGURE command.
- 15:00 Changeset [11377] by
- Renamed TriggerId to EventCounter; added code to configure run-types
- 14:59 Changeset [11376] by
- Updated writing of FITS; pipe MessageImp to all writers; enabled initialization of fRunNumber; updated FITS writing to a simplified but working version.
- 14:57 Changeset [11375] by
- Renamed TriggerId to EventCounter; added struct Configuration; added operator== to EventHeader; removed some obsolete old commented code; added new states
- 14:56 Changeset [11374] by
- Set default run-number to 1; renamed TriggerId to EventCounter
- 14:55 Changeset [11373] by
- Minor change to some log-output
- 14:51 Changeset [11372] by
- Some little changes to the output; use Vec<> instead of Get<vector<string>> fo rthe configuration
- 14:50 Changeset [11371] by
- Do not display debug messages in the message output at the bottom
- 14:50 Changeset [11370] by
- Set URL from SetEndpoint(tcp::endpoint)
- 14:03 Changeset [11369] by
- Added bias channel check program BiCh
- 07:55 Changeset [11368] by
- Finding own script path does not work reliably under ubuntu, removed
- 07:36 Changeset [11367] by
- Logon script finds its own directory, updated 'updateall' script
07/12/11:
- 22:58 Changeset [11366] by
- Added output to see if GUI was properly closed.
- 22:57 Changeset [11365] by
- Align right for fTriggerInterval
- 22:34 Changeset [11364] by
- Updated some log-out.
- 20:33 Changeset [11363] by
- Enforced an ROI of 1 for the ADC display.
- 17:13 Changeset [11362] by
- Default voltage allowed for pixel and channel commands
- 16:39 Changeset [11361] by
- Default voltages taken from configuration data
- 15:29 Changeset [11360] by
- Updates to make Edd more responsive with high incoming event rate
- 13:12 Changeset [11359] by
- Implemented a solution to solve a multi-threading issue in factOut; added the possibility to allow output of kDebug messages coming from the event builder.
- 13:08 Changeset [11358] by
- Updated display of PC time in ADC tab
- 12:00 Changeset [11357] by
- Improved a bit the console output.
- 11:59 Changeset [11356] by
- Renamed command to switch between command and data socket(s), added SET_DEBUG_EVENT_BUILDER_OUT
- 11:58 Changeset [11355] by
- Do not propagate values larger than the maximum to the progress bar.
- 11:57 Changeset [11354] by
- Renamed command to enable data-socket
- 11:09 Changeset [11353] by
- added script to display and edit entries of the configuration database (ProgramOptions) and scripts which are called by this script
- 11:04 Changeset [11352] by
- created directory for web interface to database ProgramOptions
- 11:02 Changeset [11351] by
- create directory for fact web pages
- 09:06 Changeset [11350] by
- Added argument to ResetThread
07/11/11:
- 17:33 Changeset [11349] by
- Fixed variable names.
- 16:16 Changeset [11348] by
- Added some more setter functions to StaticData to simplify the configuration.
- 16:08 Changeset [11347] by
- Used Vec instead of Get in EvalConfiguration.
- 16:07 Changeset [11346] by
- Use Vec instead of Get
- 16:06 Changeset [11345] by
- Implemented a Getter especially for vectors.
- 16:05 Changeset [11344] by
- Implemented the possibility to setup a full run-type.
- 16:04 Changeset [11343] by
- Some fixes to the initialization procedure.
- 16:03 Changeset [11342] by
- Divided Reset into soft and hard reset.
- 11:15 Changeset [11341] by
- Updated; minor changes; compile chatclient and chatserver by default; do not compile dclient5 and dserver2 by default
- 11:13 Changeset [11340] by
- Updated help text for RESET
- 11:13 Changeset [11339] by
- Added setup of the clock-conditioner frequencies.
- 11:12 Changeset [11338] by
- Moved setup of the clock-conditioner to the config-file.
- 11:09 Changeset [11337] by
- Set the CommandStates_t back to the previous values; updated ResetThread
- 11:09 Changeset [11336] by
- Added code to allow option values as hexadecimal numbers; added Get and Has for sections and for default values.
- 11:08 Changeset [11335] by
- Added g_reset and some other updates and minor fixes.
- 11:07 Changeset [11334] by
- Changed some unsigned int to signed int.
- 11:07 Changeset [11333] by
- Changed some unsigned int to signed int.
- 11:07 Changeset [11332] by
- Added FAD Reset button
- 11:05 Changeset [11331] by
- Added FAD reset button
07/10/11:
- 22:21 Changeset [11330] by
- Check whether option is available before accessing 'console' option.
- 22:20 Changeset [11329] by
- Fixed a typo in HasPrint - print-unknown wasn't recognized correctly; removed the Has-clause from the Get-template; added GetMap and GetKeys
- 22:19 Changeset [11328] by
- Updated EvalConfiguration to parse the address options one by one.
- 18:23 Changeset [11327] by
- Removed some obsolete includes.
- 17:55 Changeset [11326] by
- Added .! command to be able to execute shell commands.
- 17:05 Changeset [11325] by
- Updated output when opening and closing files.
- 17:05 Changeset [11324] by
- Updated logging when openeing and closing a file; fixed format of STATISTICS1; added fDimWriteStats
- 17:04 Changeset [11323] by
- Fixed a wrong array index (should be b instead of k)
- 17:04 Changeset [11322] by
- Added handling of FAD_CONTROL/STATS service.
- 17:03 Changeset [11321] by
- Updated some ranges.
- 15:43 Changeset [11320] by
- Added -d as shortcut for --debug.
- 15:42 Changeset [11319] by
- Updated program options description.
- 15:26 Changeset [11318] by
- Removed souble error message.
- 15:21 Changeset [11317] by
- Removed obsolete fStatsPeriod; updated statistics
- 15:20 Changeset [11316] by
- Fixed return value for stat() of filename; added GetUpdateInterval
- 14:07 Changeset [11315] by
- Added DimWriteStatistics; added ConnectionUSB; added biasctrl
- 14:07 Changeset [11314] by
- 14:06 Changeset [11313] by
- 14:05 Changeset [11312] by
- Adapted datalogger STATS service; fixed the case of null bytes in handleFadRuns
- 14:04 Changeset [11311] by
- Enabled datalogger Stop button.
- 13:54 Changeset [11310] by
- Updated datalogger controls.
- 13:52 Changeset [11309] by
- Removed confusing output.
- 13:49 Changeset [11308] by
- Updated name and usage of new statistics class; adapted and fixed new program options; updated includes; changed run-timeout to milliseconds.
- 13:48 Changeset [11307] by
- Updated includes.
- 13:43 Changeset [11306] by
- 13:43 Changeset [11305] by
- 13:42 Changeset [11304] by
- Simplified; removed the mutex; improved thread cencelation
07/08/11:
- 16:10 Changeset [11303] by
- Added command to print only the currently allowed events.
- 16:10 Changeset [11302] by
- Added PrintListOfAllowedEvents
- 16:01 Changeset [11301] by
- Replaced the use of the =-operator where possible by the use of a cinstructor for StaticData
- 16:00 Changeset [11300] by
- Replaced the operator= by a constructor in StaticData
- 15:58 Changeset [11299] by
- Added a missing default argument.
- 15:53 Changeset [11298] by
- Updated FAD statistics
- 15:53 Changeset [11297] by
- Added the possibility in ConnectionFTM to compare the requested and the answered configuration; removed consistency check in Enable and SetTriggerSeq; revised teh states of ConnectionFTM and StateMachineFTM to support the configuration state; adde CONFIGURE and RESET_CONFIGURE command
- 15:42 Changeset [11296] by
- Moved state definitions here; added operator== to StaticData
- 15:42 Changeset [11295] by
- Updated to support new statistics; added sending of filename to fDimRuns
- 15:41 Changeset [11294] by
- Removed the output of an obsolete error; adapted FAD statistics; adapted states of FTM
- 15:35 Changeset [11293] by
- Updated statistics.
- 15:25 Changeset [11292] by
- added configurations to everything that can be tweaked
- 09:49 Changeset [11291] by
- Little changes and cosmetics with statistics service
- 09:34 Changeset [11290] by
- Moved the files statistics to a separate class and improved transitions
- 06:35 Changeset [11289] by
- Fixed bug when changing active boards just before a run is started
07/07/11:
- 19:56 Changeset [11288] by
- Added virtual functions for Lock and Unlock
- 19:55 Changeset [11287] by
- Added locking around HandleEvent
- 19:55 Changeset [11286] by
- Updated to new statistic; changed to new runStat values; added ResetThread
- 19:54 Changeset [11285] by
- Added 'RESET'
- 19:54 Changeset [11284] by
- Added the possibility to set the update rate for self triggered events.
- 19:53 Changeset [11283] by
- Adapted some log output to standard used in the other classes.
- 19:52 Changeset [11282] by
- Mainly new statistics.
- 19:51 Changeset [11281] by
- Removed obsolete gi_usedMem
- 19:51 Changeset [11280] by
- Added virtual function for locking; fixed the order of instantiation of the base classes of StateMachineDim.
- 19:50 Changeset [11279] by
- Added code for new fadctrl statistics; better treatment of enable of fad and event builder widget; better treatment of event builder led
- 19:48 Changeset [11278] by
- Added preliminary code to start data logger.
- 19:48 Changeset [11277] by
- Added button to start data logger.
- 13:56 Changeset [11276] by
- Set default for FAD buffer progress bar to 0.
- 13:49 Changeset [11275] by
- Fixed fServiceList.erase in RemoveServer; the entry might not exist.
- 13:48 Changeset [11274] by
- Fixed a typo in a comment.
- 13:38 Changeset [11273] by
- Added EVT_STAT and GUI_STAT; changed ADC values to signed
- 12:46 Changeset [11272] by
- Fixed a bug in MHFalseSource::SetupFill - must be CopyBinning instead of SetBinning.
07/06/11:
- 17:25 Changeset [11271] by
- Changed default for fDimMessage from en empty string to a NULL pointer.
- 17:21 Changeset [11270] by
- Added a missing ;
- 17:19 Changeset [11269] by
- Moved calling of RemoveAllServices from RemoveAllServers and RemoveServer to DimServiceInfoList and changed FITS ValueType for bytes from 'S' to 'B'
- 16:51 Changeset [11268] by
- removed required() for option schedule-database-name
- 16:21 Changeset [11267] by
- Included a call to RemoveAllServices to RemoveServer.
- 16:20 Changeset [11266] by
- Removed cose which got obsolete due to the include of RemoveAllServices into RemoveAllServers and RemoveServer.
- 16:06 Changeset [11265] by
- Added the RemoveServer and RemoveAllServers functions. Seems to have fixed a bug occuring if the dns crashed (dim services were somehow corrupted)
- 13:51 Changeset [11264] by
- Removed includes which are now in Main.h
- 13:50 Changeset [11263] by
- Added include of boost/thread.hpp and LocalControl.h
- 13:49 Changeset [11262] by
- Made SetCurrentState a protected functioj so that derives state machines can call it.
- 13:49 Changeset [11261] by
- Removed SetCurrentState; removed includes which are now in Main.h; made argument of EvalConfiguration const; Replaced 'Closing' in output by the correct term 'Closed'
- 13:33 Changeset [11260] by
- Fixed a problem introduced with the splitting of Connect which caused the connection to e.g. the FTM getting established twice.
- 10:11 Changeset [11259] by
- Bug fixed that caused wrong calculation of the number of bytes written to file if several boards where active
- 09:53 Changeset [11258] by
- pthread_attr_init() was missing in Evidence class constructor
- 09:35 Changeset [11257] by
- Removed the --no-dim option, because it won't work anyway at the moment.
Note:
See TracTimeline
for information about the timeline view.
