Timeline



08/05/11:

23:02 Changeset [11804] by tbretz
Replaced a rounded value for the hex coordinates by the analytical value.
22:48 Changeset [11803] by tbretz
Fixed text displayed in CameraMouseMove
21:27 Changeset [11802] by tbretz
Added persistant raw data display mode.
18:44 Changeset [11801] by neise
hex: v214; dec: v220. FAD operates with socket 0 and 1 only. (TX MEM 60kb)
16:39 Changeset [11800] by neise
removed echo of ethernat command 'm'
16:33 Changeset [11799] by lyard
removed the emitting cout
16:26 Changeset [11798] by tbretz
Reordered some code to get rid of some root warnings.
16:26 Changeset [11797] by tbretz
Changed the name of the tab 'Page'; fixed warning in promotion of the new widgets.
16:19 Changeset [11796] by lyard
added tooltip for all cameras
16:00 Changeset [11795] by neise
debugged channel 0 bug.
15:09 Changeset [11794] by tbretz
Fixed the division by fPrescaling when calculating the rates.
15:08 Changeset [11793] by tbretz
Added new GUI classes to be compiled -- still needs a proper check for GL/GLU
15:08 Changeset [11792] by tbretz
Added new GUI classes to be compiled -- still needs a proper check for GL/GLU
15:07 Changeset [11791] by tbretz
Added 'light-puler' run-type.
15:07 Changeset [11790] by tbretz
Fixed an FTU-GUI ping pong
14:19 Changeset [11789] by neise
test to get rid of voltage channel 0 error.
14:12 Changeset [11788] by neise
multiple changes ... chaos.
14:10 Changeset [11787] by neise
set W5300 SPI clock freq to F_CPU/128. Since sometimes the W5300 interface seems not to work, when the Programming adapter is connected to the camere, this *might* help.
14:08 Changeset [11786] by lyard
added update of display when data changed
13:48 Changeset [11785] by lyard
the previous bug fix was not quite a fix ;)
13:32 Changeset [11784] by tbretz
Fixed settings for light pulser.
13:24 Changeset [11783] by lyard
fixed a bug with the GL camera
13:07 Changeset [11782] by lyard
replaced the 4 roots cameras by 4 GL ones
12:27 Changeset [11781] by ogrimm
Default voltages now given per bias channel
12:07 Changeset [11780] by Daniela Dorner
small changes in buttons and pulldown layout
10:47 Changeset [11779] by lyard
Replaced root camera by openGL camera in the gui

08/04/11:

20:51 Changeset [11778] by tbretz
Decrease update frequency for Event display; Set a better maximum for the raw data display.
20:07 Changeset [11777] by tbretz
Added options to set N/4 threshold; renamed options for thresholds.
20:06 Changeset [11776] by tbretz
Reformating of the clock conditioner values.
18:28 Changeset [11775] by tbretz
Added some more user commands.
18:25 Changeset [11774] by tbretz
Fixed the default for fNumGain
13:23 Changeset [11773] by ogrimm
Fix for reset button detection
12:44 Changeset [11772] by ogrimm
Added 'info' option for 'pixel' and 'channel' commands
11:20 Changeset [11771] by Daniela Dorner
key2 can be empty now
09:09 Changeset [11770] by neise
removed bug in nc_format. wrongly used pointer to piinter nc_format_buffer.

08/03/11:

22:06 Changeset [11769] by tbretz
Throw exceptions with text; do not use stoi otherwise we have to catch the exception.
22:05 Changeset [11768] by tbretz
Send the 2000/4096 also as default gain.
22:04 Changeset [11767] by tbretz
Apply the correct 2000/4096 also as default gain.
21:00 Changeset [11766] by tbretz
Latest changes.
20:16 Changeset [11765] by tbretz
Fixed the missing color for the horizontal histograms in the Raw data tab.
20:16 Changeset [11764] by tbretz
Fixed the missing color for the horizontal histograms in the Raw data tab.
20:02 Changeset [11763] by tbretz
Fixed the broken format of STATIC_DATA
19:58 Changeset [11762] by tbretz
Sanity check for fInHandler when sending new light pulser intensity
19:57 Changeset [11761] by tbretz
Fixed the light pulser control (DimStaticData)
19:06 Changeset [11760] by tbretz
Print light pulser settings.
18:18 Changeset [11759] by tbretz
Added new DATA_EVENT display.
18:17 Changeset [11758] by tbretz
Renamed EVENT_DATA to RAW_EVENT; added new EVENT_DATA
18:14 Changeset [11757] by neise
version 0x02.13: send data via socket 1 only. sockets 2..7 should be open as usual.
18:02 Changeset [11756] by neise
bitfiles are now versioned as well
17:51 Changeset [11755] by neise
reinit of this svn repos .... it was all too messy deleted the old folders and restarted with FACT_FAD_lib only. (well and the testbenches)
15:07 Changeset [11754] by tbretz
Added GetPixelStats and changed type of scalerel from uint32 to uint64
14:21 Changeset [11753] by lyard
added display of calibrated data
10:18 Changeset [11752] by tbretz
Changed artificial 0.5 to corect scale 2000/4096

08/02/11:

20:49 Changeset [11751] by tbretz
Added the missing factor 0.5 to convert ADC counts to rough mV
20:34 Changeset [11750] by tbretz
Added Errors in EVENT header.
20:32 Changeset [11749] by tbretz
Removed some stray output.
20:32 Changeset [11748] by tbretz
Latest updates.
20:32 Changeset [11747] by tbretz
Added runNr to eventCheck; added stub for subProcEvt
20:23 Changeset [11746] by tbretz
Removed some stray debug output.
20:23 Changeset [11745] by tbretz
Changed some argument types to match the huge range needed by the gain and the secondary baseline.
20:21 Changeset [11744] by tbretz
Set fNumRows to 0 in OpenFile; added ResetColumns function
20:20 Changeset [11743] by tbretz
Initialize fConv to 0.
20:20 Changeset [11742] by tbretz
changed some variable types to match the big range needed for the gain and secondary baseline.
20:19 Changeset [11741] by tbretz
Fixed scale for gain and secondaroy offset; increase fStep after Close(); changed some variable types to match the big range needed for the gain and secondary baseline.
15:43 Changeset [11740] by lyard
improved zooming and bug fix of raw events viewer
15:05 Changeset [11739] by tbretz
Fixed Dim format for STATIC_DATA
14:47 Changeset [11738] by tbretz

07/31/11:

20:01 Changeset [11737] by tbretz
Some updates to the package list.
19:59 Changeset [11736] by tbretz
Added some comments.
13:13 Changeset [11735] by tbretz
If we are already at the end of the stream return a default rather than try to analyze the stream further.
13:02 Changeset [11734] by tbretz
If we are already at the end of the stream return a default rather than try to analyze the stream further.
12:04 Changeset [11733] by tbretz
Move dimInfo in the service list at the last position to ensure that it is destroyed first; adapted arguments of RemoveService.
12:03 Changeset [11732] by tbretz
Added a check to make sure that the next run is not started while the previous is still processing.
12:03 Changeset [11731] by tbretz
Removed DimTriggerCounter; added DimTreiggerRates
12:02 Changeset [11730] by tbretz
When removing something from a list we have to pass a copy instead of a reference otherwise the removal might remove the source of the reference.

07/30/11:

20:13 Changeset [11729] by tbretz
Changed definitions in a way that forward declarations of the structs will work.
20:13 Changeset [11728] by tbretz
Do not split DrsCalib.h until it is unified with MARS.
20:08 Changeset [11727] by tbretz
Added the new files for the data processors.
20:08 Changeset [11726] by tbretz
20:07 Changeset [11725] by tbretz
Renamed the data processors and moved them to their own files.
16:16 Changeset [11724] by tbretz
Updated.
16:15 Changeset [11723] by tbretz
Fixed a bug when iterators point to empty lists.
16:15 Changeset [11722] by tbretz
16:14 Changeset [11721] by tbretz
Added checks for Qwt
16:14 Changeset [11720] by tbretz
Move QT4_INCLUDES to configure.ac; added the new FitsFile class.
16:12 Changeset [11719] by tbretz
Adapted to the changed in FitsFile; encapsulated fServiceSubscriptions.clear() in the destructor by a dim_lock/unlock. This is not a final solution, but currently the best one.
16:10 Changeset [11718] by tbretz
Fixed a typo and make sure that the buffer doesn't overflow if the data cannot be sent fast enough.
16:10 Changeset [11717] by tbretz
Fixed the memset in GetSampleStats.
16:09 Changeset [11716] by tbretz
Make use of the new FitsFile class.
16:08 Changeset [11715] by tbretz
Implemented using the new class FitsFile to write raw data and to write a file with the DRS calibration results.
16:07 Changeset [11714] by tbretz
Enabled regular call of RootUpdate, by calling DisplatchOneEvent instead of ProcessEvents the CPU usage is kept low, but the response time is better.
16:04 Changeset [11713] by tbretz
Fixed a problem in RemoveAllServers - it must be made sure that the reference given to RemoveServer is not deleted during usage.
16:04 Changeset [11712] by tbretz
Added function to return the FormatList suitable for CCfits.

07/29/11:

21:11 Changeset [11711] by tbretz
Fixed a bug when the END tag was the first in a block
18:10 Changeset [11710] by tbretz
Added libConfiguration.la to viwer.
18:08 Changeset [11709] by tbretz
Display the received light-pulser settings.
18:08 Changeset [11708] by tbretz
Added light-pulser settings to the DimStaticData structure.
18:07 Changeset [11707] by tbretz
Fixed some misspelled commands; removed the stray Fad from the light-pulser widgets.
18:07 Changeset [11706] by tbretz
Removed the stray Fad from the light-pulser widgets.
18:06 Changeset [11705] by tbretz
Added some ifdef to make it compile with Qwt 5.2; little change to the program options (so they are easier to be used in a file; made --file the first positional argument; fixed the include path to Coonfiguration.h
16:35 Changeset [11704] by lyard
replace histograms by curves drawn by myself
15:50 Changeset [11703] by tbretz
Added a nother check to help debugging whether the FITS header description matches the EVENT structure
15:49 Changeset [11702] by tbretz
Added GetSize() memember function and return this value in case of errors.
14:32 Changeset [11701] by tbretz
Display the result of the DRS calibration.
14:31 Changeset [11700] by tbretz
Send the result of the DRS calibration to the GUI.
14:31 Changeset [11699] by tbretz
Added a new function GetSampleStats which directly writes into an array o floats.
14:30 Changeset [11698] by tbretz
Fixed a bug in the name of the slots for the light pulse intensity.
13:51 Changeset [11697] by lyard
version 0.2 of the raw events viewer
10:24 Changeset [11696] by neise
the changes we made with thomas B did not work. I have to find out why... only crap is send away now.
09:54 Changeset [11695] by tbretz
Updated from dim_v19r22 to dim_v19r23

07/28/11:

15:20 Changeset [11694] by tbretz
Renamed FTM buttons.
15:13 Changeset [11693] by tbretz
Changed title for ADC tab.
15:09 Changeset [11692] by tbretz
Added trigger number to GUI.
15:04 Changeset [11691] by tbretz
Added Light Pulser commands.
14:36 Changeset [11690] by tbretz
Renamed 'StartCell' to 'StartCellData'
14:33 Changeset [11689] by tbretz
Added latest changes in the EventBuilder; consequently added TriggerNum and NumBoards to Event Header in FITS.
14:27 Changeset [11688] by tbretz
Scale calibrated data to 1000mV
14:20 Changeset [11687] by tbretz
Fixed default case of Drs calibration.
14:14 Changeset [11686] by tbretz
Don't divide ADC signal by by two, this is now done in the Drs Calibration procedure; fixed ADC AutoScale
14:13 Changeset [11685] by tbretz
Added Update of event display in caseof change of chip id.
11:47 Changeset [11684] by tbretz
Send Event data as floats.
11:47 Changeset [11683] by tbretz
Added functions to calculate result in floating points.
11:32 Changeset [11682] by tbretz
Added radio buttons for different scaling methods in ADC tab.
09:55 Changeset [11681] by neise
removed minor typos
09:16 Changeset [11680] by tbretz
Added a missing array index in the new code
09:14 Changeset [11679] by weitzel
09:14 Changeset [11678] by tbretz
To be unified with the code in MARS.
09:13 Changeset [11677] by tbretz
Added new fake-file DataFileCalib for DRS calibration.
09:13 Changeset [11676] by tbretz
Added file format 4 for DRS calibration.

07/27/11:

21:12 Changeset [11675] by tbretz
Added Channel/Chip to ADC tab
21:02 Changeset [11674] by tbretz
Switch off backlog for ConsoleStream per default.
21:02 Changeset [11673] by tbretz
Added 'no-dim' option to make boost happy; added function to convert PT1000 data to temperatures (~1% rms)
20:21 Changeset [11672] by tbretz
Changed CBC on ADT tab to CBCC
20:16 Changeset [11671] by tbretz
Fixed a bug in nc_format - nc_format_buffer is already the pointer and can be used directly. The address of it just points somewhere into the memory.
20:14 Changeset [11670] by tbretz
Simplified writing into ring-buffer by using modulo operator.
19:34 Changeset [11669] by tbretz
Fixed a possible dead lock in eth_write_*
19:03 Changeset [11668] by neise
18:57 Changeset [11667] by neise
18:57 Changeset [11666] by neise
17:16 Changeset [11665] by tbretz
Added fState to DimDynamicData
17:16 Changeset [11664] by tbretz
Added locked state to states.
17:15 Changeset [11663] by tbretz
Output fState from header.
17:15 Changeset [11662] by tbretz
Added header.fState to dynamic data.
17:15 Changeset [11661] by tbretz
Added locked status for clock conditioner.
17:14 Changeset [11660] by weitzel
FTM status states newly defined
17:14 Changeset [11659] by tbretz
Added clock conditioner LED for locked status.
16:33 Changeset [11658] by weitzel
16:27 Changeset [11657] by tbretz
Fixed temperatures provided by FAD.
16:24 Changeset [11656] by tbretz
16:23 Changeset [11655] by tbretz
fixed the board time display in the ADC tab.
16:18 Changeset [11654] by weitzel
two new status states introduced for FTM to indicate lock status of clock conditioner
15:43 Changeset [11653] by vogler
clock cond interface with PLL lock seperate
15:37 Changeset [11652] by vogler
ftm_definition for firmware v 4
14:03 Changeset [11651] by tbretz
Renamed TriggerId to TriggerCounter
12:43 Changeset [11650] by lyard
removed warning messages
12:23 Changeset [11649] by tbretz
Addes epcial pixel color for under- and overflow.
11:55 Changeset [11648] by vogler
clock cond interface, new settings loaded only when changed
10:18 Changeset [11647] by tbretz
Allow negative values in diable other patches.
10:17 Changeset [11646] by tbretz
Fixed cases in which fThresholdIdx can be negative ('all')
10:17 Changeset [11645] by tbretz
Fixed a typo.
10:07 Changeset [11644] by tbretz
Fixed a bug in SetThreshold.
09:28 Changeset [11643] by tbretz
Implemented setting min/max for color scale in rate tab
08:56 Changeset [11642] by lyard
removed references to Mars
08:44 Changeset [11641] by tbretz
Enabled the possibility to choose a pixel and a patch even taking data.
08:40 Changeset [11640] by tbretz
Added group box around FTU rate controls.
08:32 Changeset [11639] by tbretz
Changed number of allowed channels from 9 to 36
08:24 Changeset [11638] by tbretz
Set busy-off to normal and configure all DACs

07/26/11:

23:49 Changeset [11637] by tbretz
Artificially increased the size of the refclock widet of the FAD tab to display the unit properly.
23:45 Changeset [11636] by tbretz
SET_DAC_VALUE expectes two int not two short.
23:43 Changeset [11635] by tbretz
Added services and gui elements for FAD DAC values.
22:12 Changeset [11634] by tbretz
Fixed index when setting thresholds in EvealOptions
21:30 Changeset [11633] by tbretz
Fixed a double dot when checking the trigger options.
21:19 Changeset [11632] by tbretz
Renamed continous busy to constant busy.
21:17 Changeset [11631] by tbretz
Added some stuff for the new event viewer.
21:09 Changeset [11630] by tbretz
Added program options to set the DAC of the trheshold values.
21:05 Changeset [11629] by tbretz
Added busy on bit.
21:03 Changeset [11628] by tbretz
Added new definitions for busy on.
21:03 Changeset [11627] by tbretz
Split ENABLE_BUSY into ENABLE_BUSY_ON/_OFF
21:02 Changeset [11626] by tbretz
Added new busy on bit to header output.
21:02 Changeset [11625] by tbretz
Added new Busy on bit to fad output.
21:01 Changeset [11624] by tbretz
Added new Busy on command.
21:01 Changeset [11623] by tbretz
Added new BusyOn signal to FAD; some layout improvements
17:42 Changeset [11622] by tbretz
Added checks for GL, GLU and QtOpenGL
15:58 Changeset [11621] by lyard
added run number distribution check
15:37 Changeset [11620] by tbretz
Updated output at the end of configure.
15:32 Changeset [11619] by tbretz
Added more log output.
15:27 Changeset [11618] by tbretz
First draft of compiling the raw events viewer.
15:26 Changeset [11617] by tbretz
Renamed MFits to fits; removed wrong ifdef
15:23 Changeset [11616] by tbretz
Changed from using MFits.h to new fits.h in Mars trunk.
13:34 Changeset [11615] by tbretz
Added check for libz.
13:21 Changeset [11614] by tbretz
13:18 Changeset [11613] by tbretz
Renamed in order to allow the use of the existing Makefile
13:14 Changeset [11612] by tbretz
Moved and renamed in order to be able to use the existing Makefile.
13:11 Changeset [11611] by tbretz
Fixed AddEnv - should be 'host' not 'dns'
13:11 Changeset [11610] by tbretz
Made switching on and off of widgets more userfriendly in the FTU tab
13:01 Changeset [11609] by tbretz
Updated allowed states.
12:56 Changeset [11608] by tbretz
Added initialization for fTimeStamp1, fTimeStamp0 and fTriggerCounter0
12:42 Changeset [11607] by tbretz
Enable sending at least the roi checked by the event builder by DIM; Removed the other event checks for the time being
11:40 Changeset [11606] by tbretz
Added SET_TRIGGER_RATE command to GUUI.
11:26 Changeset [11605] by tbretz
Changed the definition of min/max in Compare so that it is compatible with FwVersion; added some TODO outputs; removed some unsused variables in function calls
11:26 Changeset [11604] by lyard
possible fix for bad run file name
11:25 Changeset [11603] by tbretz
Added roiTM to EVENT header.
11:23 Changeset [11602] by tbretz
Output time with fixed three digits after the point.
11:08 Changeset [11601] by Daniela Dorner
11:02 Changeset [11600] by Daniela Dorner
added user to displayed table
10:51 Changeset [11599] by Daniela Dorner
added various new features (min, max, user, show/hide of columns, ...) and changed layout
10:50 Changeset [11598] by Daniela Dorner
added ldap user authentication (not yet enabled)
10:49 Changeset [11597] by Daniela Dorner
added (functions for ldap-authentication)
10:47 Changeset [11596] by Daniela Dorner
added (explanations to be displayed)
10:23 Changeset [11595] by tbretz
Automatically enable all FTUs.
10:22 Changeset [11594] by tbretz
Implemented the correct database query.
10:22 Changeset [11593] by tbretz
Used a fixed-length type for the Dim reports.
10:21 Changeset [11592] by tbretz
Added fMcpReset.
10:21 Changeset [11591] by tbretz
Fixed min/max case for FwVersion
10:20 Changeset [11590] by tbretz
Added MCP 'Reset' button.

07/25/11:

20:28 Changeset [11589] by tbretz
delete should be delete[]
19:15 Changeset [11588] by tbretz
Do not send single trigger by default in configuration - needs some delay; enable busy to ensure consistency
19:14 Changeset [11587] by tbretz
Allow RESET in Configuring3; do not disable trigger line before ftm trigger is not disabled.
13:44 Changeset [11586] by tbretz
Added a fix when calling option_description::match for older boost versions.
13:21 Changeset [11585] by tbretz
Added libDimExtension.la to chatclient.
13:02 Changeset [11584] by tbretz
Fixed 'Connecting' status when thread is not running and sockdef!=0.
12:20 Changeset [11583] by tbretz
Removed a stray #
12:18 Changeset [11582] by tbretz
The EVENT structure now gives the RoiTM

07/24/11:

22:47 Changeset [11581] by tbretz
Removed unintentionally comitted debug output.
22:34 Changeset [11580] by tbretz
Added --null option to suppress the output more or less completely.
21:41 Changeset [11579] by tbretz
Added some descriptions for program options.
21:20 Changeset [11578] by tbretz
Moved some part of the initialization from main to Configure::DoParse
21:11 Changeset [11577] by tbretz
Moved Dim:Setup to Main::execute
21:11 Changeset [11576] by tbretz
Added host option.
21:00 Changeset [11575] by tbretz
Moved common option setup to Main.h; created Main namespace
20:43 Changeset [11574] by tbretz
Added the possibility to setup DIM_HOST_NODE with the --host program option.
20:21 Changeset [11573] by tbretz
Do not return the full path in UnLibToolize if it is the local path; fixed this case for fact++.rc
18:37 Changeset [11572] by tbretz
Latest changes.
18:37 Changeset [11571] by tbretz
Latest changes.
18:36 Changeset [11570] by tbretz
Don't print the header contents by default.
18:36 Changeset [11569] by tbretz
removed some obsolete calls to Format(); correctly display the relative and absolute error
18:33 Changeset [11568] by tbretz
Changed fHiGainFirst/fHiGainLast from Byte_t to UShort_t to support the DRS with 1024 samples.
18:29 Changeset [11567] by tbretz
Do not propagate non finite numbers.
18:23 Changeset [11566] by tbretz
Fixed header output.
17:52 Changeset [11565] by tbretz
Automatically initialize the Converter from the defined FITS format.
17:51 Changeset [11564] by tbretz
Added a function to allow the COnverter to be fed with FITS format data: ToFormat
12:34 Changeset [11563] by tbretz
Added support for the light pulser settings; changed most option names.
12:15 Changeset [11562] by tbretz
Added latest changes.
12:15 Changeset [11561] by tbretz
Added HAVE_ZLIB
12:14 Changeset [11560] by tbretz
Fixed check for SIMPLE; added HAVE_ZLIB support.
11:09 Changeset [11559] by tbretz
Removed MZlib, MFits; added izstream, fits
11:08 Changeset [11558] by tbretz
Fixed an ifsef in GetObjectInfo
11:07 Changeset [11557] by tbretz
Added exceptions if supported by the compiler; removed check for TELESCOP keyword
11:05 Changeset [11556] by tbretz
Replaced MZlib by izstream; added check for TELESCOP key.
11:04 Changeset [11555] by tbretz
added fIsSigned; adapted GetSample; added GetMin; changed code in GetMax
11:02 Changeset [11554] by tbretz
Added fIsSigned data memeber; increased version number.
11:01 Changeset [11553] by tbretz
Replaced MZlib with izstream
10:52 Changeset [11552] by tbretz
10:51 Changeset [11551] by tbretz
Moved all the source code to the header; set the fail and bad bit more properly.
10:49 Changeset [11550] by tbretz
10:49 Changeset [11549] by tbretz

07/22/11:

23:12 Changeset [11548] by tbretz
New widget should show evt/s rather than evts
23:02 Changeset [11547] by tbretz
Added new members to GUI_STAT
23:01 Changeset [11546] by tbretz
Added new members to GUI_STAT
23:01 Changeset [11545] by tbretz
Added new maxEvt support.
23:00 Changeset [11544] by tbretz
Exchanged wrong fDenable and fDwrite in Configure
22:39 Changeset [11543] by tbretz
Fixed FAD temperature min/max display.
22:39 Changeset [11542] by tbretz
Replaced BOARDID in fits header by just id (BOARDID is too long); made error messages compile again; another fix to fix the temperature min/max transmission
17:10 Changeset [11541] by weitzel
FTM IP changed
16:18 Changeset [11540] by lyard
added raw events viewer code
13:05 Changeset [11539] by tbretz
Another fix to fix the min/max temperatures
11:19 Changeset [11538] by tbretz
Added the variables for the light pulser settings in StaticData
11:18 Changeset [11537] by tbretz
Fixed once more the temperature compilation for the FADs; removed the Fatal and Error messages which were for debugging; unified some error messages.
11:17 Changeset [11536] by tbretz
Fixed a typo; added some stuff for the light pulser setup
08:53 Changeset [11535] by tbretz
Unified funtions to open an ofstream into a single function; unified some output texts in case of failure; return error from EvalOptions if log file could not be opened; use DimWriteStatistics::GetFileSizeOnDisk to replace GetFileSize code
08:50 Changeset [11534] by tbretz
Changed GetFileSizeOnDisk to be static so it can be accessed from the outside.
08:50 Changeset [11533] by tbretz
Optimized event creation.
08:49 Changeset [11532] by tbretz
Changed fExpectedRuns to keep target configuration; added NumBoards and reserved to FITS.
08:48 Changeset [11531] by tbretz
Propagate target configuration to EventBuilderWrapper.
08:48 Changeset [11530] by tbretz
Flush the output during startup immediately.
08:48 Changeset [11529] by tbretz
Added getter for fNullOUtput and fEnableBacklog
08:46 Changeset [11528] by tbretz
Replace a v6 loopback address by a v4 loopback address; we do not support v6.
08:46 Changeset [11527] by tbretz
Added operator!= to Header
08:45 Changeset [11526] by tbretz
Moved output to Setup function; changed output contents; return localhost if none was detected.
08:45 Changeset [11525] by tbretz
Added kCmdConfigFTU as a stub.
08:44 Changeset [11524] by tbretz
Write now takes a const reference
08:44 Changeset [11523] by tbretz
Fixed FadResetTriggerId

07/21/11:

18:37 Changeset [11522] by tbretz
Fixed format of fDimStatistics1.
18:34 Changeset [11521] by tbretz
folgende bug-fixes sind drin: - gotNewRun sollte jetzt immer sofort kommen - usdMem / maxMem sollte jetzt richtig gesetzt werden - open run 0 sollte nicht mehr auftreten (fuer das erste event) Neu implementiert: - falsche ROI werden nicht mehr akzeptiert; die ROI wird jeweils festgelegt durch das erste gelesenen board des ersten events eines neuen runs. Muss gelten: die ersten 8 pixel muessen identische ROI haben, Pixel 9 muss roi >= roi0 sein ( > wenn noch TM info dabei ist) mehrere zaehler werden neu an factStat uebergeben: int32_t badRoiE; //# boards with wrong roi (inconsistent in event) int32_t badRoiR; //# boards with wrong roi (inconsistent in run) int32_t badRoiB; //# boards with wrong roi (inconsistent in board) int32_t badRoi[NBOARDS]; //# wrong roi per board - RUN_HEAD enthaelt neu: uint16_t NroiTM; // <=0 wenn keine TM info da ist // (aber in event-structure ist leere TM drin...) - EVENT enthaelt neu: uint32_t NumBoards ; // number of active boards included // <40 fuer incomplete events
17:44 Changeset [11520] by tbretz
Request static data instead of just the register.
17:36 Changeset [11519] by tbretz
Added new command to configure a single FTU and use this in SetThreshold and in EnablePixel.
13:28 Changeset [11518] by tbretz
Fixed includes for g++ 4.5.2
13:27 Changeset [11517] by tbretz
Explicit conversion of function to bool needed for newer g++
13:26 Changeset [11516] by tbretz
Removed some arguments to suppress compiler warnings.
12:40 Changeset [11515] by tbretz
Added special pixel 1438 and 1439.
12:30 Changeset [11514] by weitzel
FTM: changeover to firmware ID 3
12:14 Changeset [11513] by vogler
lightpulser interface modified to reduce LED current and light output
12:13 Changeset [11512] by tbretz
Made mcp be compiled by default.
12:11 Changeset [11511] by tbretz
Updated to latest version of event builder.
12:04 Changeset [11510] by tbretz
improvements to pulse simulation - needs optimization.
12:03 Changeset [11509] by tbretz
send STOP_RUN instead of STOP to FTM.
12:02 Changeset [11508] by tbretz
Fixed the QVariant value in fMcpNumEvents
12:01 Changeset [11507] by tbretz
Fixed a name.
11:30 Changeset [11506] by Daniela Dorner
added index.html for this webinterface
11:24 Changeset [11505] by Daniela Dorner
added plenty of new features to view and edit the configuration database
11:21 Changeset [11504] by Daniela Dorner
added (interface to view configuration db)
11:20 Changeset [11503] by Daniela Dorner
added (script to get timestamp from database)
11:20 Changeset [11502] by Daniela Dorner
added (script to get pulldown with date)
11:19 Changeset [11501] by Daniela Dorner
added (script to get pulldown with programs)
09:31 Changeset [11500] by lyard
fixed a bug related to bad services formatting

07/20/11:

20:20 Changeset [11499] by tbretz
Propagate the maximum number of events and the maximum run-type together with the run-type when configuring/starting a run.
20:20 Changeset [11498] by tbretz
Propagate the maximum number of events and the maximum run-type together with the run-type when configuring/starting a run.
20:19 Changeset [11497] by tbretz
Added preliminary widgets for starting runs from the GUI.
18:49 Changeset [11496] by tbretz
Optimized ToFits according to the result of the optimization of the MFits reader.
18:36 Changeset [11495] by tbretz
Fixed a minor compiler issue from last commit.
18:10 Changeset [11494] by tbretz
Added some code to stop the ftm and the fads.
18:10 Changeset [11493] by tbretz
Receive the trigger id from the ftm; added gauss pulses in case the data was triggered from the ftm.
18:09 Changeset [11492] by tbretz
Send the trigger id with the trigger.
18:04 Changeset [11491] by tbretz
Latest changes.
18:03 Changeset [11490] by tbretz
Replaced fPCTime by a two byte buffer and init full time; added StartCell to reading.
18:01 Changeset [11489] by tbretz
Added fStartCells and increased version number
18:00 Changeset [11488] by tbretz
Added iterator to start cell.
17:58 Changeset [11487] by tbretz
Optimized reverse copy procedure; added HasKey
17:57 Changeset [11486] by tbretz
Added support for FITS files in readdaq.
14:54 Changeset [11485] by weitzel
FTM firmware features now the config_single_FTU command (to be tested); also some defaults were changed
10:27 Changeset [11484] by tbretz
Added a specialized template of SendCommand, suitable to send a string
10:27 Changeset [11483] by tbretz
Added a registry for wildcarded options to detect unaccessed options; for this EvalConfiguration(const Configuration&) has been changed to EvalOptions(Configuration&)
08:04 Changeset [11482] by tbretz
Fixed a problem with stoi when the string was empty.
08:03 Changeset [11481] by tbretz
Replaced boost::thread by std::thread and boost::bind by std::bind from the C++0x standard

07/19/11:

21:09 Changeset [11480] by tbretz
Removed obsolete include.
21:03 Changeset [11479] by tbretz
Replaces ato/atof by stoi/stof; replaced boost::lexical_cast by to_string
20:30 Changeset [11478] by tbretz
Removed some obsolete include.
20:23 Changeset [11477] by tbretz
Make use of Main.h
20:19 Changeset [11476] by tbretz
Removed some obsolete includes.
20:19 Changeset [11475] by tbretz
Added libDimExtension for drivectrl
20:18 Changeset [11474] by tbretz
Removed some obsolete includes; made it compile again.
20:00 Changeset [11473] by tbretz
Removed some obsolete includes.
19:55 Changeset [11472] by tbretz
Replaced boost::thread by std::thread.
19:54 Changeset [11471] by tbretz
Replaced boost::array by std::array
16:38 Changeset [11470] by tbretz
Improved output.
16:37 Changeset [11469] by tbretz
Fixed EnableAllPixels
16:37 Changeset [11468] by tbretz
Only plot the created commands in debig mode.
16:37 Changeset [11467] by tbretz
Replaced value by INT32_MAX; replaced StartPix with StartCell
16:36 Changeset [11466] by tbretz
Improved random data.
16:35 Changeset [11465] by tbretz
Fixed the expected size in the SetClockFrequency tab.
16:34 Changeset [11464] by tbretz
Fixed some display in the ADC tab.
14:13 Changeset [11463] by lyard
added backlog of events and log without dim
12:33 Changeset [11462] by ogrimm
Fixed bug crashing raw data browser when connected to DIM
11:13 Changeset [11461] by tbretz
Made also Entry public -- for newer root versions and moved ReadBlock down.

07/18/11:

17:52 Changeset [11460] by tbretz
Latest changes.
17:51 Changeset [11459] by tbretz
17:50 Changeset [11458] by ogrimm
Fixed detection of erroneous trigger cell
17:50 Changeset [11457] by tbretz
Added MRawFitsRead
17:49 Changeset [11456] by tbretz
Read the first header already at preprocessing time so that at least some header is available.
17:49 Changeset [11455] by ogrimm
Crash when reducing number of boards in FADctrl fixed
17:48 Changeset [11454] by tbretz
Fixed raplacing of extension and added fits as a valid extension.
17:47 Changeset [11453] by tbretz
Use FITS reader instead of raw-reader if it is a FITS raw file.
17:46 Changeset [11452] by tbretz
Added Getter for fCameraVersion
17:44 Changeset [11451] by tbretz
Au^Cmatically use MGeomCamFACT if the run header says that it is a fact camera.
17:19 Changeset [11450] by tbretz
Added some comments about FITS basic types.
17:18 Changeset [11449] by tbretz
Improved some output.
16:50 Changeset [11448] by tbretz
Added setter to init fact data and to set the format values.
16:49 Changeset [11447] by tbretz
Added virtual function to initialize reading event data.
16:35 Changeset [11446] by tbretz
Removed the debug values for maxevt and maxtime; removed two obsolete comment lines.
16:26 Changeset [11445] by tbretz
Updated access to run-number and store it into fExpectedRuns instead of fStartedRuns; implemented setting of exipry time and maximum event numbers; replaced DimEventData with just EVENT; updated FITS writing
16:25 Changeset [11444] by tbretz
Updated access to run-number.
16:24 Changeset [11443] by tbretz
Latest updates.
16:23 Changeset [11442] by tbretz
Replaced DimEventData by EVENT
16:22 Changeset [11441] by tbretz
Write a proper FITS header; removed obsolete fMjdRef data member
14:41 Changeset [11440] by tbretz
Added some comment.
14:40 Changeset [11439] by tbretz
Added Iso() member function.
13:24 Changeset [11438] by tbretz
Added MFits
13:23 Changeset [11437] by tbretz
13:21 Changeset [11436] by tbretz
13:20 Changeset [11435] by tbretz
Further optimized seeking so that we always seek relative.
09:57 Changeset [11434] by tbretz
Removed the need of fill_buffer
09:31 Changeset [11433] by tbretz
There is no need to make the derivative from istream virtual.
09:30 Changeset [11432] by tbretz
Added function DataMember which will return a pointer to a data member from the dictionary.
09:27 Changeset [11431] by tbretz
Outsourced OpenFile and ReadRunHeader to their own funtions.
09:26 Changeset [11430] by tbretz
Made ReadEvent and SkipEvent virtual.
09:25 Changeset [11429] by tbretz
Added -D__MARS__ to AcLiC
09:24 Changeset [11428] by tbretz
Included fstream

07/15/11:

15:47 Changeset [11427] by tbretz
the upper bound of searching the maximum was wrong
15:46 Changeset [11426] by tbretz
Added GaussProb2D
15:44 Changeset [11425] by ogrimm
Bug fix for previous trigger cell sanity check
15:43 Changeset [11424] by tbretz
Fixed seeking in gzipped files; increased buffer size
15:26 Changeset [11423] by tbretz
To be able to properly remobe the .libs also check the current path if filename is without path.
15:25 Changeset [11422] by tbretz
Don't use just a single buffer for writing, it might become overwritten if a new event is added to the queue before the olf one was sent.
15:24 Changeset [11421] by tbretz
Fall back from configured to connected as soon as the corresponding run has been opened.
15:23 Changeset [11420] by tbretz
Added Prescaler stuff and goNewRun feature.
15:23 Changeset [11419] by tbretz
Added prescaler stuff.
14:10 Changeset [11418] by tbretz
Replaced the include of MessageDim with MessageImp
14:10 Changeset [11417] by tbretz
Removed an obsolete comment block.
13:42 Changeset [11416] by tbretz
Removed an obsolete bool.
13:40 Changeset [11415] by tbretz
Added some const qualifiers.
12:12 Changeset [11414] by ogrimm
Added debugging for 'double signal' effect on FAD
07:44 Changeset [11413] by ogrimm
Fixed bug when changing displayed event scope channel too fast

07/14/11:

18:43 Changeset [11412] by tbretz
Fixed a problem with a possible infinite loop in the display.
18:37 Changeset [11411] by tbretz
18:36 Changeset [11410] by tbretz
Fixed a check which was always true.
18:35 Changeset [11409] by tbretz
Some name change to get rid of some compiler warnings.
18:32 Changeset [11408] by tbretz
Propagate argument to fThread.Run
18:32 Changeset [11407] by tbretz
Some improvements to get rid of compiler warnnings.
12:15 Changeset [11406] by lyard
Open the log file right away if path given in configuration
11:42 Changeset [11405] by lyard
various improvements of the datalogger
09:22 Changeset [11404] by tbretz
Added fact++.rc global configuration file.
09:01 Changeset [11403] by tbretz
Use Vec instead of Get and make sure 'console' is not accessed if not available.
09:00 Changeset [11402] by tbretz
Changed the default qos from kInfo to kMessage
08:59 Changeset [11401] by tbretz
Do not output = if avlue is empty
08:59 Changeset [11400] by tbretz
Do not output = if value is empty
08:58 Changeset [11399] by tbretz
Added microseconds to time output.
08:58 Changeset [11398] by tbretz
Added microseconds to time output.
08:58 Changeset [11397] by tbretz
Made write public to be accessed from Main.h
08:57 Changeset [11396] by tbretz
Adapted output to what we have now elsewhere.
08:57 Changeset [11395] by tbretz
Set the Dim timestamp to the given time.
08:56 Changeset [11394] by tbretz
Fixed a warning in SetTriggerRate
08:56 Changeset [11393] by tbretz
Added Time_t()
08:55 Changeset [11392] by tbretz
Added milliseconds to time output.

07/13/11:

23:28 Changeset [11391] by tbretz
Added svn path as PACKAGE_URL
23:27 Changeset [11390] by tbretz
Updated startup block
23:19 Changeset [11389] by tbretz
UPdated startup block
23:09 Changeset [11388] by tbretz
Added svn revision to output at startup.
22:44 Changeset [11387] by tbretz
Added code to unify access to parsed options; added GetOptions
22:43 Changeset [11386] by tbretz
Added output of a lot of information at startup.
20:02 Changeset [11385] by ogrimm
Board time published as DIM service, files written with permissions for OTHER
18:42 Changeset [11384] by tbretz
18:41 Changeset [11383] by tbretz
Added dim libraries to fad and ftm; added mcp
18:41 Changeset [11382] by tbretz
Added dim libraries to fad and ftm; added mcp
18:39 Changeset [11381] by tbretz
Some changes to the way filenames are determined; made MessageImp a base class of DataFileImp for simplicity; redirect debug-out to console.
18:38 Changeset [11380] by tbretz
Implemented sending triggers from the ftm to the fad via Dim.
18:37 Changeset [11379] by tbretz
Updated the behaviour of the configure command; allow all possible values to be send as trigger rate; fixed increasing of the run-number when a new run is started.
18:36 Changeset [11378] by tbretz
Updated the bahaviour of the CONFIGURE command.
15:00 Changeset [11377] by tbretz
Renamed TriggerId to EventCounter; added code to configure run-types
14:59 Changeset [11376] by tbretz
Updated writing of FITS; pipe MessageImp to all writers; enabled initialization of fRunNumber; updated FITS writing to a simplified but working version.
14:57 Changeset [11375] by tbretz
Renamed TriggerId to EventCounter; added struct Configuration; added operator== to EventHeader; removed some obsolete old commented code; added new states
14:56 Changeset [11374] by tbretz
Set default run-number to 1; renamed TriggerId to EventCounter
14:55 Changeset [11373] by tbretz
Minor change to some log-output
14:51 Changeset [11372] by tbretz
Some little changes to the output; use Vec<> instead of Get<vector<string>> fo rthe configuration
14:50 Changeset [11371] by tbretz
Do not display debug messages in the message output at the bottom
14:50 Changeset [11370] by tbretz
Set URL from SetEndpoint(tcp::endpoint)
14:03 Changeset [11369] by ogrimm
Added bias channel check program BiCh
07:55 Changeset [11368] by ogrimm
Finding own script path does not work reliably under ubuntu, removed
07:36 Changeset [11367] by ogrimm
Logon script finds its own directory, updated 'updateall' script

07/12/11:

22:58 Changeset [11366] by tbretz
Added output to see if GUI was properly closed.
22:57 Changeset [11365] by tbretz
Align right for fTriggerInterval
22:34 Changeset [11364] by tbretz
Updated some log-out.
20:33 Changeset [11363] by tbretz
Enforced an ROI of 1 for the ADC display.
17:13 Changeset [11362] by ogrimm
Default voltage allowed for pixel and channel commands
16:39 Changeset [11361] by ogrimm
Default voltages taken from configuration data
15:29 Changeset [11360] by ogrimm
Updates to make Edd more responsive with high incoming event rate
13:12 Changeset [11359] by tbretz
Implemented a solution to solve a multi-threading issue in factOut; added the possibility to allow output of kDebug messages coming from the event builder.
13:08 Changeset [11358] by tbretz
Updated display of PC time in ADC tab
12:00 Changeset [11357] by tbretz
Improved a bit the console output.
11:59 Changeset [11356] by tbretz
Renamed command to switch between command and data socket(s), added SET_DEBUG_EVENT_BUILDER_OUT
11:58 Changeset [11355] by tbretz
Do not propagate values larger than the maximum to the progress bar.
11:57 Changeset [11354] by tbretz
Renamed command to enable data-socket
11:09 Changeset [11353] by Daniela Dorner
added script to display and edit entries of the configuration database (ProgramOptions) and scripts which are called by this script
11:04 Changeset [11352] by Daniela Dorner
created directory for web interface to database ProgramOptions
11:02 Changeset [11351] by Daniela Dorner
create directory for fact web pages
09:06 Changeset [11350] by tbretz
Added argument to ResetThread

07/11/11:

17:33 Changeset [11349] by tbretz
Fixed variable names.
16:16 Changeset [11348] by tbretz
Added some more setter functions to StaticData to simplify the configuration.
16:08 Changeset [11347] by tbretz
Used Vec instead of Get in EvalConfiguration.
16:07 Changeset [11346] by tbretz
Use Vec instead of Get
16:06 Changeset [11345] by tbretz
Implemented a Getter especially for vectors.
16:05 Changeset [11344] by tbretz
Implemented the possibility to setup a full run-type.
16:04 Changeset [11343] by tbretz
Some fixes to the initialization procedure.
16:03 Changeset [11342] by tbretz
Divided Reset into soft and hard reset.
11:15 Changeset [11341] by tbretz
Updated; minor changes; compile chatclient and chatserver by default; do not compile dclient5 and dserver2 by default
11:13 Changeset [11340] by tbretz
Updated help text for RESET
11:13 Changeset [11339] by tbretz
Added setup of the clock-conditioner frequencies.
11:12 Changeset [11338] by tbretz
Moved setup of the clock-conditioner to the config-file.
11:09 Changeset [11337] by tbretz
Set the CommandStates_t back to the previous values; updated ResetThread
11:09 Changeset [11336] by tbretz
Added code to allow option values as hexadecimal numbers; added Get and Has for sections and for default values.
11:08 Changeset [11335] by tbretz
Added g_reset and some other updates and minor fixes.
11:07 Changeset [11334] by tbretz
Changed some unsigned int to signed int.
11:07 Changeset [11333] by tbretz
Changed some unsigned int to signed int.
11:07 Changeset [11332] by tbretz
Added FAD Reset button
11:05 Changeset [11331] by tbretz
Added FAD reset button

07/10/11:

22:21 Changeset [11330] by tbretz
Check whether option is available before accessing 'console' option.
22:20 Changeset [11329] by tbretz
Fixed a typo in HasPrint - print-unknown wasn't recognized correctly; removed the Has-clause from the Get-template; added GetMap and GetKeys
22:19 Changeset [11328] by tbretz
Updated EvalConfiguration to parse the address options one by one.
18:23 Changeset [11327] by tbretz
Removed some obsolete includes.
17:55 Changeset [11326] by tbretz
Added .! command to be able to execute shell commands.
17:05 Changeset [11325] by tbretz
Updated output when opening and closing files.
17:05 Changeset [11324] by tbretz
Updated logging when openeing and closing a file; fixed format of STATISTICS1; added fDimWriteStats
17:04 Changeset [11323] by tbretz
Fixed a wrong array index (should be b instead of k)
17:04 Changeset [11322] by tbretz
Added handling of FAD_CONTROL/STATS service.
17:03 Changeset [11321] by tbretz
Updated some ranges.
15:43 Changeset [11320] by tbretz
Added -d as shortcut for --debug.
15:42 Changeset [11319] by tbretz
Updated program options description.
15:26 Changeset [11318] by tbretz
Removed souble error message.
15:21 Changeset [11317] by tbretz
Removed obsolete fStatsPeriod; updated statistics
15:20 Changeset [11316] by tbretz
Fixed return value for stat() of filename; added GetUpdateInterval
14:07 Changeset [11315] by tbretz
Added DimWriteStatistics; added ConnectionUSB; added biasctrl
14:07 Changeset [11314] by tbretz
14:06 Changeset [11313] by tbretz
14:05 Changeset [11312] by tbretz
Adapted datalogger STATS service; fixed the case of null bytes in handleFadRuns
14:04 Changeset [11311] by tbretz
Enabled datalogger Stop button.
13:54 Changeset [11310] by tbretz
Updated datalogger controls.
13:52 Changeset [11309] by tbretz
Removed confusing output.
13:49 Changeset [11308] by tbretz
Updated name and usage of new statistics class; adapted and fixed new program options; updated includes; changed run-timeout to milliseconds.
13:48 Changeset [11307] by tbretz
Updated includes.
13:43 Changeset [11306] by tbretz
13:43 Changeset [11305] by tbretz
13:42 Changeset [11304] by tbretz
Simplified; removed the mutex; improved thread cencelation

07/08/11:

16:10 Changeset [11303] by tbretz
Added command to print only the currently allowed events.
16:10 Changeset [11302] by tbretz
Added PrintListOfAllowedEvents
16:01 Changeset [11301] by tbretz
Replaced the use of the =-operator where possible by the use of a cinstructor for StaticData
16:00 Changeset [11300] by tbretz
Replaced the operator= by a constructor in StaticData
15:58 Changeset [11299] by tbretz
Added a missing default argument.
15:53 Changeset [11298] by tbretz
Updated FAD statistics
15:53 Changeset [11297] by tbretz
Added the possibility in ConnectionFTM to compare the requested and the answered configuration; removed consistency check in Enable and SetTriggerSeq; revised teh states of ConnectionFTM and StateMachineFTM to support the configuration state; adde CONFIGURE and RESET_CONFIGURE command
15:42 Changeset [11296] by tbretz
Moved state definitions here; added operator== to StaticData
15:42 Changeset [11295] by tbretz
Updated to support new statistics; added sending of filename to fDimRuns
15:41 Changeset [11294] by tbretz
Removed the output of an obsolete error; adapted FAD statistics; adapted states of FTM
15:35 Changeset [11293] by tbretz
Updated statistics.
15:25 Changeset [11292] by lyard
added configurations to everything that can be tweaked
09:49 Changeset [11291] by lyard
Little changes and cosmetics with statistics service
09:34 Changeset [11290] by lyard
Moved the files statistics to a separate class and improved transitions
06:35 Changeset [11289] by ogrimm
Fixed bug when changing active boards just before a run is started

07/07/11:

19:56 Changeset [11288] by tbretz
Added virtual functions for Lock and Unlock
19:55 Changeset [11287] by tbretz
Added locking around HandleEvent
19:55 Changeset [11286] by tbretz
Updated to new statistic; changed to new runStat values; added ResetThread
19:54 Changeset [11285] by tbretz
Added 'RESET'
19:54 Changeset [11284] by tbretz
Added the possibility to set the update rate for self triggered events.
19:53 Changeset [11283] by tbretz
Adapted some log output to standard used in the other classes.
19:52 Changeset [11282] by tbretz
Mainly new statistics.
19:51 Changeset [11281] by tbretz
Removed obsolete gi_usedMem
19:51 Changeset [11280] by tbretz
Added virtual function for locking; fixed the order of instantiation of the base classes of StateMachineDim.
19:50 Changeset [11279] by tbretz
Added code for new fadctrl statistics; better treatment of enable of fad and event builder widget; better treatment of event builder led
19:48 Changeset [11278] by tbretz
Added preliminary code to start data logger.
19:48 Changeset [11277] by tbretz
Added button to start data logger.
13:56 Changeset [11276] by tbretz
Set default for FAD buffer progress bar to 0.
13:49 Changeset [11275] by tbretz
Fixed fServiceList.erase in RemoveServer; the entry might not exist.
13:48 Changeset [11274] by tbretz
Fixed a typo in a comment.
13:38 Changeset [11273] by tbretz
Added EVT_STAT and GUI_STAT; changed ADC values to signed
12:46 Changeset [11272] by tbretz
Fixed a bug in MHFalseSource::SetupFill - must be CopyBinning instead of SetBinning.

07/06/11:

17:25 Changeset [11271] by tbretz
Changed default for fDimMessage from en empty string to a NULL pointer.
17:21 Changeset [11270] by tbretz
Added a missing ;
17:19 Changeset [11269] by tbretz
Moved calling of RemoveAllServices from RemoveAllServers and RemoveServer to DimServiceInfoList and changed FITS ValueType for bytes from 'S' to 'B'
16:51 Changeset [11268] by Daniela Dorner
removed required() for option schedule-database-name
16:21 Changeset [11267] by tbretz
Included a call to RemoveAllServices to RemoveServer.
16:20 Changeset [11266] by tbretz
Removed cose which got obsolete due to the include of RemoveAllServices into RemoveAllServers and RemoveServer.
16:06 Changeset [11265] by lyard
Added the RemoveServer and RemoveAllServers functions. Seems to have fixed a bug occuring if the dns crashed (dim services were somehow corrupted)
13:51 Changeset [11264] by tbretz
Removed includes which are now in Main.h
13:50 Changeset [11263] by tbretz
Added include of boost/thread.hpp and LocalControl.h
13:49 Changeset [11262] by tbretz
Made SetCurrentState a protected functioj so that derives state machines can call it.
13:49 Changeset [11261] by tbretz
Removed SetCurrentState; removed includes which are now in Main.h; made argument of EvalConfiguration const; Replaced 'Closing' in output by the correct term 'Closed'
13:33 Changeset [11260] by tbretz
Fixed a problem introduced with the splitting of Connect which caused the connection to e.g. the FTM getting established twice.
10:11 Changeset [11259] by ogrimm
Bug fixed that caused wrong calculation of the number of bytes written to file if several boards where active
09:53 Changeset [11258] by ogrimm
pthread_attr_init() was missing in Evidence class constructor
09:35 Changeset [11257] by tbretz
Removed the --no-dim option, because it won't work anyway at the moment.
Note: See TracTimeline for information about the timeline view.