Timeline



08/12/11:

21:24 Changeset [11903] by tbretz
Updated what is needed to compiule the viewer.
21:21 Changeset [11902] by tbretz
Fixed the calibration subtraction.
16:23 Changeset [11901] by lyard
many changes...
13:51 Changeset [11900] by tbretz
Made the viewer work also with older raw data files.
13:15 Changeset [11899] by Daniela Dorner
updated corsika version, bugfix for diskusage, writing permission for group
11:28 Changeset [11898] by lyard
oops forgot the header file...
11:12 Changeset [11897] by lyard
fixed calibrated data display
10:26 Changeset [11896] by tbretz
Added mcore to path.
09:47 Changeset [11895] by tbretz
Latest one socket version with a fix to stop buffering data after the requested number of events.
08:38 Changeset [11894] by lyard
added anti-aliasing

08/11/11:

23:09 Changeset [11893] by tbretz
Implemented a new determination fo run-number after noon in the fadctrl; created the possibility to add the date to the raw-data path; allow to set the path as program option; for all this moved some code from the datalogger to DimWriteStatistics
21:06 Changeset [11892] by tbretz
Removed old dummy code for the DRS calibration.
21:05 Changeset [11891] by tbretz
Removed an obsolete comment block.
21:05 Changeset [11890] by tbretz
Added how to decode the trigger type.
21:04 Changeset [11889] by tbretz
Removed some obsolete comment blocks.
21:04 Changeset [11888] by tbretz
Added decoding of the trigger type.
21:04 Changeset [11887] by tbretz
Removed obsolete comments.
21:03 Changeset [11886] by tbretz
Do not write stuff which is not yet defined.
21:02 Changeset [11885] by tbretz
Added NPIx and NROI
21:01 Changeset [11884] by tbretz
Added title and units for the camera displays; implemented display of the physcial pipeline in the ADC tab
21:00 Changeset [11883] by tbretz
Added some bias controls.
21:00 Changeset [11882] by tbretz
Added pixel to switch ADC display to the physical pipeline.
16:35 Changeset [11881] by tbretz
Updated to DIM V19r24
10:39 Changeset [11880] by lyard
oops
10:39 Changeset [11879] by lyard
few changes
10:36 Changeset [11878] by lyard
added more features

08/10/11:

16:48 Changeset [11877] by lyard
fixed autoscale and median bugs
16:33 Changeset [11876] by lyard
fixed autoscale and median bugs
14:56 Changeset [11875] by lyard
degree character utf16 fixed
14:41 Changeset [11874] by lyard
added various features

08/09/11:

23:58 Changeset [11873] by tbretz
Added mcore to include path
23:56 Changeset [11872] by tbretz
Made sure that izstream and fits are in the dictionary
23:55 Changeset [11871] by tbretz
added the possibility to read the pixel map from a file
23:53 Changeset [11870] by tbretz
When setting a pixel map in the event data subtract one to get from the id to the index.
23:52 Changeset [11869] by tbretz
Implemented the possibility to set the pixel map in the run-header when initializing for fact data.
20:16 Changeset [11868] by tbretz
Two voltages need scaling by 2
20:15 Changeset [11867] by tbretz
SetPtrAddress takes the number of elements not the number of bytes.
20:07 Changeset [11866] by tbretz
Replaced fPixelMapHW by fPixelMap
17:23 Changeset [11865] by lyard
added coloured selected patch and a first preliminary text drawing
16:58 Changeset [11864] by tbretz
Fixed some scaling issues which came up with the scale removed in Apply
16:52 Changeset [11863] by Daniela Dorner
adapted paths for new production
16:52 Changeset [11862] by Daniela Dorner
added observation level and moon
16:09 Changeset [11861] by lyard
bug fix
14:49 Changeset [11860] by tbretz
Implemented reading referencevoltages from file -- preliminary.
14:49 Changeset [11859] by tbretz
Implemented SetRef and Set0 button for Bias.
14:20 Changeset [11858] by tbretz
More updates... added new function... restructured functions, etc.
14:17 Changeset [11857] by tbretz
Updates of some naming; implemented Bias control communication.
14:16 Changeset [11856] by tbretz
Added LED for Bias ctrl and for over current.
13:54 Changeset [11855] by tbretz
Finalized the BIAS display.
10:01 Changeset [11854] by tbretz
Added the Bias control to the GUI; consequently, updated the rate display functions -- to be unified.
00:05 Changeset [11853] by tbretz
Added the 'lost' 1000 event number.
00:03 Changeset [11852] by tbretz
This is the first step to get a working and stable Bias control.
00:02 Changeset [11851] by tbretz
undef DEBUG_TX -- it seems to work stable.

08/08/11:

19:40 Changeset [11850] by tbretz
Added the possibility to switch off the drs calibration display - does only work yet in case of update of the service.
17:28 Changeset [11849] by Daniela Dorner
small fixes
17:03 Changeset [11848] by Daniela Dorner
added (two scripts checking the status of the network card and the time of the machines; crontab files for all 4 machines)
15:56 Changeset [11847] by tbretz
Implemented display of FSC values.
15:49 Changeset [11846] by tbretz
Convert from milli to Volt and Amp
14:58 Changeset [11845] by tbretz
Some minor bug fixes to get the latest changes working.
11:24 Changeset [11844] by tbretz
Updated path to DrsCalib.h
11:18 Changeset [11843] by tbretz
10:46 Changeset [11842] by Daniela Dorner
adapted to allow backup of defined databases
10:45 Changeset [11841] by Daniela Dorner
added (setup for processing in La Palma)

08/07/11:

18:45 Changeset [11840] by tbretz
Added default options for run-type, run-time and run-count
18:44 Changeset [11839] by tbretz
Changed START_RUN service to provide the current run-number (whethe ropen or not) and the next run-number.
18:43 Changeset [11838] by tbretz
make sure that the Closed-message is displayed only once for raw-data.
18:43 Changeset [11837] by tbretz
Changed Dim services to ensure they send the time.
18:40 Changeset [11836] by tbretz
Added the Aux tab with the widgets for FSC data display.
17:49 Changeset [11835] by tbretz
Fixed a bug in a format string.
17:47 Changeset [11834] by tbretz
Updated sending DIM services.
16:53 Changeset [11833] by tbretz
Fixed a few typos.
16:44 Changeset [11832] by tbretz
Set fProcessing back as late as possible
16:42 Changeset [11831] by tbretz
Changed the Apply function to avoid too high numbers; little improvements to GetPixelStats
16:40 Changeset [11830] by tbretz
Added keys for ADC resolution and ADC range
16:36 Changeset [11829] by tbretz
Improved writing; fixed reading of drs-calibration file.

08/06/11:

19:59 Changeset [11828] by tbretz
Added a missing data member.
19:45 Changeset [11827] by tbretz
Some fine tuning.
19:45 Changeset [11826] by tbretz
Fixed service size for START_RUN
19:09 Changeset [11825] by tbretz
Configure possible run lengths etc. from program options.
18:34 Changeset [11824] by tbretz
Display some statistics in the FAD tab with th ehelp of current-run/next-run from the fadctrl -- in the way the users gets the most important infomration of what is going on.
17:53 Changeset [11823] by tbretz
Do not display rates if the corresponding FTU is switched off.
17:16 Changeset [11822] by tbretz
Updated to latest changes in dependencies.
16:54 Changeset [11821] by tbretz
Added diff of externals to diff target.
16:53 Changeset [11820] by tbretz
Display run-numbers of currently applied DRS calibration.
16:38 Changeset [11819] by tbretz
Added code for eventCheck; added command to load a DRS calibration file.
16:38 Changeset [11818] by tbretz
Added ReadFits.
16:37 Changeset [11817] by tbretz
Added command to load a DRS calibration.
16:14 Changeset [11816] by tbretz
16:11 Changeset [11815] by tbretz
16:11 Changeset [11814] by tbretz
Removed izstream.h and fits.h
16:10 Changeset [11813] by tbretz
Added new directory mcore.
16:05 Changeset [11812] by tbretz
Removed a stray debug output.
16:05 Changeset [11811] by tbretz
Added reading of FITS files.
16:05 Changeset [11810] by tbretz
Added reading of FITS files.
16:05 Changeset [11809] by tbretz
Updated include of fits.h
16:04 Changeset [11808] by tbretz
Updated to account for the new svn:externals which directly checks mcore out of Mars.
16:04 Changeset [11807] by tbretz
Moved signals for fRatesMin/fRatesMax to MainWindow -- they don't depend on root anymore.
15:57 Changeset [11806] by tbretz
11:05 Changeset [11805] by tbretz
Fixed a wrong spelling.

08/05/11:

23:02 Changeset [11804] by tbretz
Replaced a rounded value for the hex coordinates by the analytical value.
22:48 Changeset [11803] by tbretz
Fixed text displayed in CameraMouseMove
21:27 Changeset [11802] by tbretz
Added persistant raw data display mode.
18:44 Changeset [11801] by neise
hex: v214; dec: v220. FAD operates with socket 0 and 1 only. (TX MEM 60kb)
16:39 Changeset [11800] by neise
removed echo of ethernat command 'm'
16:33 Changeset [11799] by lyard
removed the emitting cout
16:26 Changeset [11798] by tbretz
Reordered some code to get rid of some root warnings.
16:26 Changeset [11797] by tbretz
Changed the name of the tab 'Page'; fixed warning in promotion of the new widgets.
16:19 Changeset [11796] by lyard
added tooltip for all cameras
16:00 Changeset [11795] by neise
debugged channel 0 bug.
15:09 Changeset [11794] by tbretz
Fixed the division by fPrescaling when calculating the rates.
15:08 Changeset [11793] by tbretz
Added new GUI classes to be compiled -- still needs a proper check for GL/GLU
15:08 Changeset [11792] by tbretz
Added new GUI classes to be compiled -- still needs a proper check for GL/GLU
15:07 Changeset [11791] by tbretz
Added 'light-puler' run-type.
15:07 Changeset [11790] by tbretz
Fixed an FTU-GUI ping pong
14:19 Changeset [11789] by neise
test to get rid of voltage channel 0 error.
14:12 Changeset [11788] by neise
multiple changes ... chaos.
14:10 Changeset [11787] by neise
set W5300 SPI clock freq to F_CPU/128. Since sometimes the W5300 interface seems not to work, when the Programming adapter is connected to the camere, this *might* help.
14:08 Changeset [11786] by lyard
added update of display when data changed
13:48 Changeset [11785] by lyard
the previous bug fix was not quite a fix ;)
13:32 Changeset [11784] by tbretz
Fixed settings for light pulser.
13:24 Changeset [11783] by lyard
fixed a bug with the GL camera
13:07 Changeset [11782] by lyard
replaced the 4 roots cameras by 4 GL ones
12:27 Changeset [11781] by ogrimm
Default voltages now given per bias channel
12:07 Changeset [11780] by Daniela Dorner
small changes in buttons and pulldown layout
10:47 Changeset [11779] by lyard
Replaced root camera by openGL camera in the gui

08/04/11:

20:51 Changeset [11778] by tbretz
Decrease update frequency for Event display; Set a better maximum for the raw data display.
20:07 Changeset [11777] by tbretz
Added options to set N/4 threshold; renamed options for thresholds.
20:06 Changeset [11776] by tbretz
Reformating of the clock conditioner values.
18:28 Changeset [11775] by tbretz
Added some more user commands.
18:25 Changeset [11774] by tbretz
Fixed the default for fNumGain
13:23 Changeset [11773] by ogrimm
Fix for reset button detection
12:44 Changeset [11772] by ogrimm
Added 'info' option for 'pixel' and 'channel' commands
11:20 Changeset [11771] by Daniela Dorner
key2 can be empty now
09:09 Changeset [11770] by neise
removed bug in nc_format. wrongly used pointer to piinter nc_format_buffer.

08/03/11:

22:06 Changeset [11769] by tbretz
Throw exceptions with text; do not use stoi otherwise we have to catch the exception.
22:05 Changeset [11768] by tbretz
Send the 2000/4096 also as default gain.
22:04 Changeset [11767] by tbretz
Apply the correct 2000/4096 also as default gain.
21:00 Changeset [11766] by tbretz
Latest changes.
20:16 Changeset [11765] by tbretz
Fixed the missing color for the horizontal histograms in the Raw data tab.
20:16 Changeset [11764] by tbretz
Fixed the missing color for the horizontal histograms in the Raw data tab.
20:02 Changeset [11763] by tbretz
Fixed the broken format of STATIC_DATA
19:58 Changeset [11762] by tbretz
Sanity check for fInHandler when sending new light pulser intensity
19:57 Changeset [11761] by tbretz
Fixed the light pulser control (DimStaticData)
19:06 Changeset [11760] by tbretz
Print light pulser settings.
18:18 Changeset [11759] by tbretz
Added new DATA_EVENT display.
18:17 Changeset [11758] by tbretz
Renamed EVENT_DATA to RAW_EVENT; added new EVENT_DATA
18:14 Changeset [11757] by neise
version 0x02.13: send data via socket 1 only. sockets 2..7 should be open as usual.
18:02 Changeset [11756] by neise
bitfiles are now versioned as well
17:51 Changeset [11755] by neise
reinit of this svn repos .... it was all too messy deleted the old folders and restarted with FACT_FAD_lib only. (well and the testbenches)
15:07 Changeset [11754] by tbretz
Added GetPixelStats and changed type of scalerel from uint32 to uint64
14:21 Changeset [11753] by lyard
added display of calibrated data
10:18 Changeset [11752] by tbretz
Changed artificial 0.5 to corect scale 2000/4096

08/02/11:

20:49 Changeset [11751] by tbretz
Added the missing factor 0.5 to convert ADC counts to rough mV
20:34 Changeset [11750] by tbretz
Added Errors in EVENT header.
20:32 Changeset [11749] by tbretz
Removed some stray output.
20:32 Changeset [11748] by tbretz
Latest updates.
20:32 Changeset [11747] by tbretz
Added runNr to eventCheck; added stub for subProcEvt
20:23 Changeset [11746] by tbretz
Removed some stray debug output.
20:23 Changeset [11745] by tbretz
Changed some argument types to match the huge range needed by the gain and the secondary baseline.
20:21 Changeset [11744] by tbretz
Set fNumRows to 0 in OpenFile; added ResetColumns function
20:20 Changeset [11743] by tbretz
Initialize fConv to 0.
20:20 Changeset [11742] by tbretz
changed some variable types to match the big range needed for the gain and secondary baseline.
20:19 Changeset [11741] by tbretz
Fixed scale for gain and secondaroy offset; increase fStep after Close(); changed some variable types to match the big range needed for the gain and secondary baseline.
15:43 Changeset [11740] by lyard
improved zooming and bug fix of raw events viewer
15:05 Changeset [11739] by tbretz
Fixed Dim format for STATIC_DATA
14:47 Changeset [11738] by tbretz

07/31/11:

20:01 Changeset [11737] by tbretz
Some updates to the package list.
19:59 Changeset [11736] by tbretz
Added some comments.
13:13 Changeset [11735] by tbretz
If we are already at the end of the stream return a default rather than try to analyze the stream further.
13:02 Changeset [11734] by tbretz
If we are already at the end of the stream return a default rather than try to analyze the stream further.
12:04 Changeset [11733] by tbretz
Move dimInfo in the service list at the last position to ensure that it is destroyed first; adapted arguments of RemoveService.
12:03 Changeset [11732] by tbretz
Added a check to make sure that the next run is not started while the previous is still processing.
12:03 Changeset [11731] by tbretz
Removed DimTriggerCounter; added DimTreiggerRates
12:02 Changeset [11730] by tbretz
When removing something from a list we have to pass a copy instead of a reference otherwise the removal might remove the source of the reference.

07/30/11:

20:13 Changeset [11729] by tbretz
Changed definitions in a way that forward declarations of the structs will work.
20:13 Changeset [11728] by tbretz
Do not split DrsCalib.h until it is unified with MARS.
20:08 Changeset [11727] by tbretz
Added the new files for the data processors.
20:08 Changeset [11726] by tbretz
20:07 Changeset [11725] by tbretz
Renamed the data processors and moved them to their own files.
16:16 Changeset [11724] by tbretz
Updated.
16:15 Changeset [11723] by tbretz
Fixed a bug when iterators point to empty lists.
16:15 Changeset [11722] by tbretz
16:14 Changeset [11721] by tbretz
Added checks for Qwt
16:14 Changeset [11720] by tbretz
Move QT4_INCLUDES to configure.ac; added the new FitsFile class.
16:12 Changeset [11719] by tbretz
Adapted to the changed in FitsFile; encapsulated fServiceSubscriptions.clear() in the destructor by a dim_lock/unlock. This is not a final solution, but currently the best one.
16:10 Changeset [11718] by tbretz
Fixed a typo and make sure that the buffer doesn't overflow if the data cannot be sent fast enough.
16:10 Changeset [11717] by tbretz
Fixed the memset in GetSampleStats.
16:09 Changeset [11716] by tbretz
Make use of the new FitsFile class.
16:08 Changeset [11715] by tbretz
Implemented using the new class FitsFile to write raw data and to write a file with the DRS calibration results.
16:07 Changeset [11714] by tbretz
Enabled regular call of RootUpdate, by calling DisplatchOneEvent instead of ProcessEvents the CPU usage is kept low, but the response time is better.
16:04 Changeset [11713] by tbretz
Fixed a problem in RemoveAllServers - it must be made sure that the reference given to RemoveServer is not deleted during usage.
16:04 Changeset [11712] by tbretz
Added function to return the FormatList suitable for CCfits.

07/29/11:

21:11 Changeset [11711] by tbretz
Fixed a bug when the END tag was the first in a block
18:10 Changeset [11710] by tbretz
Added libConfiguration.la to viwer.
18:08 Changeset [11709] by tbretz
Display the received light-pulser settings.
18:08 Changeset [11708] by tbretz
Added light-pulser settings to the DimStaticData structure.
18:07 Changeset [11707] by tbretz
Fixed some misspelled commands; removed the stray Fad from the light-pulser widgets.
18:07 Changeset [11706] by tbretz
Removed the stray Fad from the light-pulser widgets.
18:06 Changeset [11705] by tbretz
Added some ifdef to make it compile with Qwt 5.2; little change to the program options (so they are easier to be used in a file; made --file the first positional argument; fixed the include path to Coonfiguration.h
16:35 Changeset [11704] by lyard
replace histograms by curves drawn by myself
15:50 Changeset [11703] by tbretz
Added a nother check to help debugging whether the FITS header description matches the EVENT structure
15:49 Changeset [11702] by tbretz
Added GetSize() memember function and return this value in case of errors.
14:32 Changeset [11701] by tbretz
Display the result of the DRS calibration.
14:31 Changeset [11700] by tbretz
Send the result of the DRS calibration to the GUI.
14:31 Changeset [11699] by tbretz
Added a new function GetSampleStats which directly writes into an array o floats.
14:30 Changeset [11698] by tbretz
Fixed a bug in the name of the slots for the light pulse intensity.
13:51 Changeset [11697] by lyard
version 0.2 of the raw events viewer
10:24 Changeset [11696] by neise
the changes we made with thomas B did not work. I have to find out why... only crap is send away now.
09:54 Changeset [11695] by tbretz
Updated from dim_v19r22 to dim_v19r23

07/28/11:

15:20 Changeset [11694] by tbretz
Renamed FTM buttons.
15:13 Changeset [11693] by tbretz
Changed title for ADC tab.
15:09 Changeset [11692] by tbretz
Added trigger number to GUI.
15:04 Changeset [11691] by tbretz
Added Light Pulser commands.
14:36 Changeset [11690] by tbretz
Renamed 'StartCell' to 'StartCellData'
14:33 Changeset [11689] by tbretz
Added latest changes in the EventBuilder; consequently added TriggerNum and NumBoards to Event Header in FITS.
14:27 Changeset [11688] by tbretz
Scale calibrated data to 1000mV
14:20 Changeset [11687] by tbretz
Fixed default case of Drs calibration.
14:14 Changeset [11686] by tbretz
Don't divide ADC signal by by two, this is now done in the Drs Calibration procedure; fixed ADC AutoScale
14:13 Changeset [11685] by tbretz
Added Update of event display in caseof change of chip id.
11:47 Changeset [11684] by tbretz
Send Event data as floats.
11:47 Changeset [11683] by tbretz
Added functions to calculate result in floating points.
11:32 Changeset [11682] by tbretz
Added radio buttons for different scaling methods in ADC tab.
09:55 Changeset [11681] by neise
removed minor typos
09:16 Changeset [11680] by tbretz
Added a missing array index in the new code
09:14 Changeset [11679] by weitzel
09:14 Changeset [11678] by tbretz
To be unified with the code in MARS.
09:13 Changeset [11677] by tbretz
Added new fake-file DataFileCalib for DRS calibration.
09:13 Changeset [11676] by tbretz
Added file format 4 for DRS calibration.

07/27/11:

21:12 Changeset [11675] by tbretz
Added Channel/Chip to ADC tab
21:02 Changeset [11674] by tbretz
Switch off backlog for ConsoleStream per default.
21:02 Changeset [11673] by tbretz
Added 'no-dim' option to make boost happy; added function to convert PT1000 data to temperatures (~1% rms)
20:21 Changeset [11672] by tbretz
Changed CBC on ADT tab to CBCC
20:16 Changeset [11671] by tbretz
Fixed a bug in nc_format - nc_format_buffer is already the pointer and can be used directly. The address of it just points somewhere into the memory.
20:14 Changeset [11670] by tbretz
Simplified writing into ring-buffer by using modulo operator.
19:34 Changeset [11669] by tbretz
Fixed a possible dead lock in eth_write_*
19:03 Changeset [11668] by neise
18:57 Changeset [11667] by neise
18:57 Changeset [11666] by neise
17:16 Changeset [11665] by tbretz
Added fState to DimDynamicData
17:16 Changeset [11664] by tbretz
Added locked state to states.
17:15 Changeset [11663] by tbretz
Output fState from header.
17:15 Changeset [11662] by tbretz
Added header.fState to dynamic data.
17:15 Changeset [11661] by tbretz
Added locked status for clock conditioner.
17:14 Changeset [11660] by weitzel
FTM status states newly defined
17:14 Changeset [11659] by tbretz
Added clock conditioner LED for locked status.
16:33 Changeset [11658] by weitzel
16:27 Changeset [11657] by tbretz
Fixed temperatures provided by FAD.
16:24 Changeset [11656] by tbretz
16:23 Changeset [11655] by tbretz
fixed the board time display in the ADC tab.
16:18 Changeset [11654] by weitzel
two new status states introduced for FTM to indicate lock status of clock conditioner
15:43 Changeset [11653] by vogler
clock cond interface with PLL lock seperate
15:37 Changeset [11652] by vogler
ftm_definition for firmware v 4
14:03 Changeset [11651] by tbretz
Renamed TriggerId to TriggerCounter
12:43 Changeset [11650] by lyard
removed warning messages
12:23 Changeset [11649] by tbretz
Addes epcial pixel color for under- and overflow.
11:55 Changeset [11648] by vogler
clock cond interface, new settings loaded only when changed
10:18 Changeset [11647] by tbretz
Allow negative values in diable other patches.
10:17 Changeset [11646] by tbretz
Fixed cases in which fThresholdIdx can be negative ('all')
10:17 Changeset [11645] by tbretz
Fixed a typo.
10:07 Changeset [11644] by tbretz
Fixed a bug in SetThreshold.
09:28 Changeset [11643] by tbretz
Implemented setting min/max for color scale in rate tab
08:56 Changeset [11642] by lyard
removed references to Mars
08:44 Changeset [11641] by tbretz
Enabled the possibility to choose a pixel and a patch even taking data.
08:40 Changeset [11640] by tbretz
Added group box around FTU rate controls.
08:32 Changeset [11639] by tbretz
Changed number of allowed channels from 9 to 36
08:24 Changeset [11638] by tbretz
Set busy-off to normal and configure all DACs

07/26/11:

23:49 Changeset [11637] by tbretz
Artificially increased the size of the refclock widet of the FAD tab to display the unit properly.
23:45 Changeset [11636] by tbretz
SET_DAC_VALUE expectes two int not two short.
23:43 Changeset [11635] by tbretz
Added services and gui elements for FAD DAC values.
22:12 Changeset [11634] by tbretz
Fixed index when setting thresholds in EvealOptions
21:30 Changeset [11633] by tbretz
Fixed a double dot when checking the trigger options.
21:19 Changeset [11632] by tbretz
Renamed continous busy to constant busy.
21:17 Changeset [11631] by tbretz
Added some stuff for the new event viewer.
21:09 Changeset [11630] by tbretz
Added program options to set the DAC of the trheshold values.
21:05 Changeset [11629] by tbretz
Added busy on bit.
21:03 Changeset [11628] by tbretz
Added new definitions for busy on.
21:03 Changeset [11627] by tbretz
Split ENABLE_BUSY into ENABLE_BUSY_ON/_OFF
21:02 Changeset [11626] by tbretz
Added new busy on bit to header output.
21:02 Changeset [11625] by tbretz
Added new Busy on bit to fad output.
21:01 Changeset [11624] by tbretz
Added new Busy on command.
21:01 Changeset [11623] by tbretz
Added new BusyOn signal to FAD; some layout improvements
17:42 Changeset [11622] by tbretz
Added checks for GL, GLU and QtOpenGL
15:58 Changeset [11621] by lyard
added run number distribution check
15:37 Changeset [11620] by tbretz
Updated output at the end of configure.
15:32 Changeset [11619] by tbretz
Added more log output.
15:27 Changeset [11618] by tbretz
First draft of compiling the raw events viewer.
15:26 Changeset [11617] by tbretz
Renamed MFits to fits; removed wrong ifdef
15:23 Changeset [11616] by tbretz
Changed from using MFits.h to new fits.h in Mars trunk.
13:34 Changeset [11615] by tbretz
Added check for libz.
13:21 Changeset [11614] by tbretz
13:18 Changeset [11613] by tbretz
Renamed in order to allow the use of the existing Makefile
13:14 Changeset [11612] by tbretz
Moved and renamed in order to be able to use the existing Makefile.
13:11 Changeset [11611] by tbretz
Fixed AddEnv - should be 'host' not 'dns'
13:11 Changeset [11610] by tbretz
Made switching on and off of widgets more userfriendly in the FTU tab
13:01 Changeset [11609] by tbretz
Updated allowed states.
12:56 Changeset [11608] by tbretz
Added initialization for fTimeStamp1, fTimeStamp0 and fTriggerCounter0
12:42 Changeset [11607] by tbretz
Enable sending at least the roi checked by the event builder by DIM; Removed the other event checks for the time being
11:40 Changeset [11606] by tbretz
Added SET_TRIGGER_RATE command to GUUI.
11:26 Changeset [11605] by tbretz
Changed the definition of min/max in Compare so that it is compatible with FwVersion; added some TODO outputs; removed some unsused variables in function calls
11:26 Changeset [11604] by lyard
possible fix for bad run file name
11:25 Changeset [11603] by tbretz
Added roiTM to EVENT header.
11:23 Changeset [11602] by tbretz
Output time with fixed three digits after the point.
11:08 Changeset [11601] by Daniela Dorner
11:02 Changeset [11600] by Daniela Dorner
added user to displayed table
10:51 Changeset [11599] by Daniela Dorner
added various new features (min, max, user, show/hide of columns, ...) and changed layout
10:50 Changeset [11598] by Daniela Dorner
added ldap user authentication (not yet enabled)
10:49 Changeset [11597] by Daniela Dorner
added (functions for ldap-authentication)
10:47 Changeset [11596] by Daniela Dorner
added (explanations to be displayed)
10:23 Changeset [11595] by tbretz
Automatically enable all FTUs.
10:22 Changeset [11594] by tbretz
Implemented the correct database query.
10:22 Changeset [11593] by tbretz
Used a fixed-length type for the Dim reports.
10:21 Changeset [11592] by tbretz
Added fMcpReset.
10:21 Changeset [11591] by tbretz
Fixed min/max case for FwVersion
10:20 Changeset [11590] by tbretz
Added MCP 'Reset' button.

07/25/11:

20:28 Changeset [11589] by tbretz
delete should be delete[]
19:15 Changeset [11588] by tbretz
Do not send single trigger by default in configuration - needs some delay; enable busy to ensure consistency
19:14 Changeset [11587] by tbretz
Allow RESET in Configuring3; do not disable trigger line before ftm trigger is not disabled.
13:44 Changeset [11586] by tbretz
Added a fix when calling option_description::match for older boost versions.
13:21 Changeset [11585] by tbretz
Added libDimExtension.la to chatclient.
13:02 Changeset [11584] by tbretz
Fixed 'Connecting' status when thread is not running and sockdef!=0.
12:20 Changeset [11583] by tbretz
Removed a stray #
12:18 Changeset [11582] by tbretz
The EVENT structure now gives the RoiTM

07/24/11:

22:47 Changeset [11581] by tbretz
Removed unintentionally comitted debug output.
22:34 Changeset [11580] by tbretz
Added --null option to suppress the output more or less completely.
21:41 Changeset [11579] by tbretz
Added some descriptions for program options.
21:20 Changeset [11578] by tbretz
Moved some part of the initialization from main to Configure::DoParse
21:11 Changeset [11577] by tbretz
Moved Dim:Setup to Main::execute
21:11 Changeset [11576] by tbretz
Added host option.
21:00 Changeset [11575] by tbretz
Moved common option setup to Main.h; created Main namespace
20:43 Changeset [11574] by tbretz
Added the possibility to setup DIM_HOST_NODE with the --host program option.
20:21 Changeset [11573] by tbretz
Do not return the full path in UnLibToolize if it is the local path; fixed this case for fact++.rc
18:37 Changeset [11572] by tbretz
Latest changes.
18:37 Changeset [11571] by tbretz
Latest changes.
18:36 Changeset [11570] by tbretz
Don't print the header contents by default.
18:36 Changeset [11569] by tbretz
removed some obsolete calls to Format(); correctly display the relative and absolute error
18:33 Changeset [11568] by tbretz
Changed fHiGainFirst/fHiGainLast from Byte_t to UShort_t to support the DRS with 1024 samples.
18:29 Changeset [11567] by tbretz
Do not propagate non finite numbers.
18:23 Changeset [11566] by tbretz
Fixed header output.
17:52 Changeset [11565] by tbretz
Automatically initialize the Converter from the defined FITS format.
17:51 Changeset [11564] by tbretz
Added a function to allow the COnverter to be fed with FITS format data: ToFormat
12:34 Changeset [11563] by tbretz
Added support for the light pulser settings; changed most option names.
12:15 Changeset [11562] by tbretz
Added latest changes.
12:15 Changeset [11561] by tbretz
Added HAVE_ZLIB
12:14 Changeset [11560] by tbretz
Fixed check for SIMPLE; added HAVE_ZLIB support.
11:09 Changeset [11559] by tbretz
Removed MZlib, MFits; added izstream, fits
11:08 Changeset [11558] by tbretz
Fixed an ifsef in GetObjectInfo
11:07 Changeset [11557] by tbretz
Added exceptions if supported by the compiler; removed check for TELESCOP keyword
11:05 Changeset [11556] by tbretz
Replaced MZlib by izstream; added check for TELESCOP key.
11:04 Changeset [11555] by tbretz
added fIsSigned; adapted GetSample; added GetMin; changed code in GetMax
11:02 Changeset [11554] by tbretz
Added fIsSigned data memeber; increased version number.
11:01 Changeset [11553] by tbretz
Replaced MZlib with izstream
10:52 Changeset [11552] by tbretz
10:51 Changeset [11551] by tbretz
Moved all the source code to the header; set the fail and bad bit more properly.
10:49 Changeset [11550] by tbretz
10:49 Changeset [11549] by tbretz

07/22/11:

23:12 Changeset [11548] by tbretz
New widget should show evt/s rather than evts
23:02 Changeset [11547] by tbretz
Added new members to GUI_STAT
23:01 Changeset [11546] by tbretz
Added new members to GUI_STAT
23:01 Changeset [11545] by tbretz
Added new maxEvt support.
23:00 Changeset [11544] by tbretz
Exchanged wrong fDenable and fDwrite in Configure
22:39 Changeset [11543] by tbretz
Fixed FAD temperature min/max display.
22:39 Changeset [11542] by tbretz
Replaced BOARDID in fits header by just id (BOARDID is too long); made error messages compile again; another fix to fix the temperature min/max transmission
17:10 Changeset [11541] by weitzel
FTM IP changed
16:18 Changeset [11540] by lyard
added raw events viewer code
13:05 Changeset [11539] by tbretz
Another fix to fix the min/max temperatures
11:19 Changeset [11538] by tbretz
Added the variables for the light pulser settings in StaticData
11:18 Changeset [11537] by tbretz
Fixed once more the temperature compilation for the FADs; removed the Fatal and Error messages which were for debugging; unified some error messages.
11:17 Changeset [11536] by tbretz
Fixed a typo; added some stuff for the light pulser setup
08:53 Changeset [11535] by tbretz
Unified funtions to open an ofstream into a single function; unified some output texts in case of failure; return error from EvalOptions if log file could not be opened; use DimWriteStatistics::GetFileSizeOnDisk to replace GetFileSize code
08:50 Changeset [11534] by tbretz
Changed GetFileSizeOnDisk to be static so it can be accessed from the outside.
08:50 Changeset [11533] by tbretz
Optimized event creation.
08:49 Changeset [11532] by tbretz
Changed fExpectedRuns to keep target configuration; added NumBoards and reserved to FITS.
08:48 Changeset [11531] by tbretz
Propagate target configuration to EventBuilderWrapper.
08:48 Changeset [11530] by tbretz
Flush the output during startup immediately.
08:48 Changeset [11529] by tbretz
Added getter for fNullOUtput and fEnableBacklog
08:46 Changeset [11528] by tbretz
Replace a v6 loopback address by a v4 loopback address; we do not support v6.
08:46 Changeset [11527] by tbretz
Added operator!= to Header
08:45 Changeset [11526] by tbretz
Moved output to Setup function; changed output contents; return localhost if none was detected.
08:45 Changeset [11525] by tbretz
Added kCmdConfigFTU as a stub.
08:44 Changeset [11524] by tbretz
Write now takes a const reference
08:44 Changeset [11523] by tbretz
Fixed FadResetTriggerId

07/21/11:

18:37 Changeset [11522] by tbretz
Fixed format of fDimStatistics1.
18:34 Changeset [11521] by tbretz
folgende bug-fixes sind drin: - gotNewRun sollte jetzt immer sofort kommen - usdMem / maxMem sollte jetzt richtig gesetzt werden - open run 0 sollte nicht mehr auftreten (fuer das erste event) Neu implementiert: - falsche ROI werden nicht mehr akzeptiert; die ROI wird jeweils festgelegt durch das erste gelesenen board des ersten events eines neuen runs. Muss gelten: die ersten 8 pixel muessen identische ROI haben, Pixel 9 muss roi >= roi0 sein ( > wenn noch TM info dabei ist) mehrere zaehler werden neu an factStat uebergeben: int32_t badRoiE; //# boards with wrong roi (inconsistent in event) int32_t badRoiR; //# boards with wrong roi (inconsistent in run) int32_t badRoiB; //# boards with wrong roi (inconsistent in board) int32_t badRoi[NBOARDS]; //# wrong roi per board - RUN_HEAD enthaelt neu: uint16_t NroiTM; // <=0 wenn keine TM info da ist // (aber in event-structure ist leere TM drin...) - EVENT enthaelt neu: uint32_t NumBoards ; // number of active boards included // <40 fuer incomplete events
17:44 Changeset [11520] by tbretz
Request static data instead of just the register.
17:36 Changeset [11519] by tbretz
Added new command to configure a single FTU and use this in SetThreshold and in EnablePixel.
13:28 Changeset [11518] by tbretz
Fixed includes for g++ 4.5.2
13:27 Changeset [11517] by tbretz
Explicit conversion of function to bool needed for newer g++
13:26 Changeset [11516] by tbretz
Removed some arguments to suppress compiler warnings.
12:40 Changeset [11515] by tbretz
Added special pixel 1438 and 1439.
12:30 Changeset [11514] by weitzel
FTM: changeover to firmware ID 3
12:14 Changeset [11513] by vogler
lightpulser interface modified to reduce LED current and light output
12:13 Changeset [11512] by tbretz
Made mcp be compiled by default.
12:11 Changeset [11511] by tbretz
Updated to latest version of event builder.
12:04 Changeset [11510] by tbretz
improvements to pulse simulation - needs optimization.
12:03 Changeset [11509] by tbretz
send STOP_RUN instead of STOP to FTM.
12:02 Changeset [11508] by tbretz
Fixed the QVariant value in fMcpNumEvents
12:01 Changeset [11507] by tbretz
Fixed a name.
11:30 Changeset [11506] by Daniela Dorner
added index.html for this webinterface
11:24 Changeset [11505] by Daniela Dorner
added plenty of new features to view and edit the configuration database
11:21 Changeset [11504] by Daniela Dorner
added (interface to view configuration db)
11:20 Changeset [11503] by Daniela Dorner
added (script to get timestamp from database)
11:20 Changeset [11502] by Daniela Dorner
added (script to get pulldown with date)
11:19 Changeset [11501] by Daniela Dorner
added (script to get pulldown with programs)
09:31 Changeset [11500] by lyard
fixed a bug related to bad services formatting

07/20/11:

20:20 Changeset [11499] by tbretz
Propagate the maximum number of events and the maximum run-type together with the run-type when configuring/starting a run.
20:20 Changeset [11498] by tbretz
Propagate the maximum number of events and the maximum run-type together with the run-type when configuring/starting a run.
20:19 Changeset [11497] by tbretz
Added preliminary widgets for starting runs from the GUI.
18:49 Changeset [11496] by tbretz
Optimized ToFits according to the result of the optimization of the MFits reader.
18:36 Changeset [11495] by tbretz
Fixed a minor compiler issue from last commit.
18:10 Changeset [11494] by tbretz
Added some code to stop the ftm and the fads.
18:10 Changeset [11493] by tbretz
Receive the trigger id from the ftm; added gauss pulses in case the data was triggered from the ftm.
18:09 Changeset [11492] by tbretz
Send the trigger id with the trigger.
18:04 Changeset [11491] by tbretz
Latest changes.
18:03 Changeset [11490] by tbretz
Replaced fPCTime by a two byte buffer and init full time; added StartCell to reading.
18:01 Changeset [11489] by tbretz
Added fStartCells and increased version number
18:00 Changeset [11488] by tbretz
Added iterator to start cell.
17:58 Changeset [11487] by tbretz
Optimized reverse copy procedure; added HasKey
17:57 Changeset [11486] by tbretz
Added support for FITS files in readdaq.
14:54 Changeset [11485] by weitzel
FTM firmware features now the config_single_FTU command (to be tested); also some defaults were changed
10:27 Changeset [11484] by tbretz
Added a specialized template of SendCommand, suitable to send a string
10:27 Changeset [11483] by tbretz
Added a registry for wildcarded options to detect unaccessed options; for this EvalConfiguration(const Configuration&) has been changed to EvalOptions(Configuration&)
08:04 Changeset [11482] by tbretz
Fixed a problem with stoi when the string was empty.
08:03 Changeset [11481] by tbretz
Replaced boost::thread by std::thread and boost::bind by std::bind from the C++0x standard

07/19/11:

21:09 Changeset [11480] by tbretz
Removed obsolete include.
21:03 Changeset [11479] by tbretz
Replaces ato/atof by stoi/stof; replaced boost::lexical_cast by to_string
20:30 Changeset [11478] by tbretz
Removed some obsolete include.
20:23 Changeset [11477] by tbretz
Make use of Main.h
20:19 Changeset [11476] by tbretz
Removed some obsolete includes.
20:19 Changeset [11475] by tbretz
Added libDimExtension for drivectrl
20:18 Changeset [11474] by tbretz
Removed some obsolete includes; made it compile again.
20:00 Changeset [11473] by tbretz
Removed some obsolete includes.
19:55 Changeset [11472] by tbretz
Replaced boost::thread by std::thread.
19:54 Changeset [11471] by tbretz
Replaced boost::array by std::array
16:38 Changeset [11470] by tbretz
Improved output.
16:37 Changeset [11469] by tbretz
Fixed EnableAllPixels
16:37 Changeset [11468] by tbretz
Only plot the created commands in debig mode.
16:37 Changeset [11467] by tbretz
Replaced value by INT32_MAX; replaced StartPix with StartCell
16:36 Changeset [11466] by tbretz
Improved random data.
16:35 Changeset [11465] by tbretz
Fixed the expected size in the SetClockFrequency tab.
16:34 Changeset [11464] by tbretz
Fixed some display in the ADC tab.
14:13 Changeset [11463] by lyard
added backlog of events and log without dim
12:33 Changeset [11462] by ogrimm
Fixed bug crashing raw data browser when connected to DIM
11:13 Changeset [11461] by tbretz
Made also Entry public -- for newer root versions and moved ReadBlock down.

07/18/11:

17:52 Changeset [11460] by tbretz
Latest changes.
17:51 Changeset [11459] by tbretz
17:50 Changeset [11458] by ogrimm
Fixed detection of erroneous trigger cell
17:50 Changeset [11457] by tbretz
Added MRawFitsRead
17:49 Changeset [11456] by tbretz
Read the first header already at preprocessing time so that at least some header is available.
17:49 Changeset [11455] by ogrimm
Crash when reducing number of boards in FADctrl fixed
17:48 Changeset [11454] by tbretz
Fixed raplacing of extension and added fits as a valid extension.
17:47 Changeset [11453] by tbretz
Use FITS reader instead of raw-reader if it is a FITS raw file.
17:46 Changeset [11452] by tbretz
Added Getter for fCameraVersion
17:44 Changeset [11451] by tbretz
Au^Cmatically use MGeomCamFACT if the run header says that it is a fact camera.
17:19 Changeset [11450] by tbretz
Added some comments about FITS basic types.
17:18 Changeset [11449] by tbretz
Improved some output.
16:50 Changeset [11448] by tbretz
Added setter to init fact data and to set the format values.
16:49 Changeset [11447] by tbretz
Added virtual function to initialize reading event data.
16:35 Changeset [11446] by tbretz
Removed the debug values for maxevt and maxtime; removed two obsolete comment lines.
16:26 Changeset [11445] by tbretz
Updated access to run-number and store it into fExpectedRuns instead of fStartedRuns; implemented setting of exipry time and maximum event numbers; replaced DimEventData with just EVENT; updated FITS writing
16:25 Changeset [11444] by tbretz
Updated access to run-number.
16:24 Changeset [11443] by tbretz
Latest updates.
16:23 Changeset [11442] by tbretz
Replaced DimEventData by EVENT
16:22 Changeset [11441] by tbretz
Write a proper FITS header; removed obsolete fMjdRef data member
14:41 Changeset [11440] by tbretz
Added some comment.
14:40 Changeset [11439] by tbretz
Added Iso() member function.
13:24 Changeset [11438] by tbretz
Added MFits
13:23 Changeset [11437] by tbretz
13:21 Changeset [11436] by tbretz
13:20 Changeset [11435] by tbretz
Further optimized seeking so that we always seek relative.
09:57 Changeset [11434] by tbretz
Removed the need of fill_buffer
09:31 Changeset [11433] by tbretz
There is no need to make the derivative from istream virtual.
09:30 Changeset [11432] by tbretz
Added function DataMember which will return a pointer to a data member from the dictionary.
09:27 Changeset [11431] by tbretz
Outsourced OpenFile and ReadRunHeader to their own funtions.
09:26 Changeset [11430] by tbretz
Made ReadEvent and SkipEvent virtual.
09:25 Changeset [11429] by tbretz
Added -D__MARS__ to AcLiC
09:24 Changeset [11428] by tbretz
Included fstream

07/15/11:

15:47 Changeset [11427] by tbretz
the upper bound of searching the maximum was wrong
15:46 Changeset [11426] by tbretz
Added GaussProb2D
15:44 Changeset [11425] by ogrimm
Bug fix for previous trigger cell sanity check
15:43 Changeset [11424] by tbretz
Fixed seeking in gzipped files; increased buffer size
15:26 Changeset [11423] by tbretz
To be able to properly remobe the .libs also check the current path if filename is without path.
15:25 Changeset [11422] by tbretz
Don't use just a single buffer for writing, it might become overwritten if a new event is added to the queue before the olf one was sent.
15:24 Changeset [11421] by tbretz
Fall back from configured to connected as soon as the corresponding run has been opened.
15:23 Changeset [11420] by tbretz
Added Prescaler stuff and goNewRun feature.
15:23 Changeset [11419] by tbretz
Added prescaler stuff.
14:10 Changeset [11418] by tbretz
Replaced the include of MessageDim with MessageImp
14:10 Changeset [11417] by tbretz
Removed an obsolete comment block.
13:42 Changeset [11416] by tbretz
Removed an obsolete bool.
13:40 Changeset [11415] by tbretz
Added some const qualifiers.
12:12 Changeset [11414] by ogrimm
Added debugging for 'double signal' effect on FAD
07:44 Changeset [11413] by ogrimm
Fixed bug when changing displayed event scope channel too fast

07/14/11:

18:43 Changeset [11412] by tbretz
Fixed a problem with a possible infinite loop in the display.
18:37 Changeset [11411] by tbretz
18:36 Changeset [11410] by tbretz
Fixed a check which was always true.
18:35 Changeset [11409] by tbretz
Some name change to get rid of some compiler warnings.
18:32 Changeset [11408] by tbretz
Propagate argument to fThread.Run
18:32 Changeset [11407] by tbretz
Some improvements to get rid of compiler warnnings.
12:15 Changeset [11406] by lyard
Open the log file right away if path given in configuration
11:42 Changeset [11405] by lyard
various improvements of the datalogger
09:22 Changeset [11404] by tbretz
Added fact++.rc global configuration file.
09:01 Changeset [11403] by tbretz
Use Vec instead of Get and make sure 'console' is not accessed if not available.
09:00 Changeset [11402] by tbretz
Changed the default qos from kInfo to kMessage
08:59 Changeset [11401] by tbretz
Do not output = if avlue is empty
08:59 Changeset [11400] by tbretz
Do not output = if value is empty
08:58 Changeset [11399] by tbretz
Added microseconds to time output.
08:58 Changeset [11398] by tbretz
Added microseconds to time output.
08:58 Changeset [11397] by tbretz
Made write public to be accessed from Main.h
08:57 Changeset [11396] by tbretz
Adapted output to what we have now elsewhere.
08:57 Changeset [11395] by tbretz
Set the Dim timestamp to the given time.
08:56 Changeset [11394] by tbretz
Fixed a warning in SetTriggerRate
08:56 Changeset [11393] by tbretz
Added Time_t()
08:55 Changeset [11392] by tbretz
Added milliseconds to time output.

07/13/11:

23:28 Changeset [11391] by tbretz
Added svn path as PACKAGE_URL
23:27 Changeset [11390] by tbretz
Updated startup block
23:19 Changeset [11389] by tbretz
UPdated startup block
23:09 Changeset [11388] by tbretz
Added svn revision to output at startup.
22:44 Changeset [11387] by tbretz
Added code to unify access to parsed options; added GetOptions
22:43 Changeset [11386] by tbretz
Added output of a lot of information at startup.
20:02 Changeset [11385] by ogrimm
Board time published as DIM service, files written with permissions for OTHER
18:42 Changeset [11384] by tbretz
18:41 Changeset [11383] by tbretz
Added dim libraries to fad and ftm; added mcp
18:41 Changeset [11382] by tbretz
Added dim libraries to fad and ftm; added mcp
18:39 Changeset [11381] by tbretz
Some changes to the way filenames are determined; made MessageImp a base class of DataFileImp for simplicity; redirect debug-out to console.
18:38 Changeset [11380] by tbretz
Implemented sending triggers from the ftm to the fad via Dim.
18:37 Changeset [11379] by tbretz
Updated the behaviour of the configure command; allow all possible values to be send as trigger rate; fixed increasing of the run-number when a new run is started.
18:36 Changeset [11378] by tbretz
Updated the bahaviour of the CONFIGURE command.
15:00 Changeset [11377] by tbretz
Renamed TriggerId to EventCounter; added code to configure run-types
14:59 Changeset [11376] by tbretz
Updated writing of FITS; pipe MessageImp to all writers; enabled initialization of fRunNumber; updated FITS writing to a simplified but working version.
14:57 Changeset [11375] by tbretz
Renamed TriggerId to EventCounter; added struct Configuration; added operator== to EventHeader; removed some obsolete old commented code; added new states
14:56 Changeset [11374] by tbretz
Set default run-number to 1; renamed TriggerId to EventCounter
14:55 Changeset [11373] by tbretz
Minor change to some log-output
14:51 Changeset [11372] by tbretz
Some little changes to the output; use Vec<> instead of Get<vector<string>> fo rthe configuration
14:50 Changeset [11371] by tbretz
Do not display debug messages in the message output at the bottom
14:50 Changeset [11370] by tbretz
Set URL from SetEndpoint(tcp::endpoint)
14:03 Changeset [11369] by ogrimm
Added bias channel check program BiCh
07:55 Changeset [11368] by ogrimm
Finding own script path does not work reliably under ubuntu, removed
07:36 Changeset [11367] by ogrimm
Logon script finds its own directory, updated 'updateall' script
Note: See TracTimeline for information about the timeline view.