Back to DataTakingMainPage
Data Taking Check List
Preparation before going on shift:
| Task | achieved
|
|---|
| account in La Palma? |
|
| filled contact info? |
|
| read "Doing a shift" page? |
|
| read logbook of the last nights? |
|
| read shift forum? |
|
| familiar with the pages and features of smartfact? |
|
| familiar with the data taking limits? |
|
| computer prepared? vpn? vnc? |
|
| enter name in shift schedule? |
|
Check List for every night:
| Task | what to do for | 1. Night | 2. Night | 3. Night | 4. Night | 5. Night | 6. Night | 7. Night | 8. Night | 9. Night
|
|---|
| Preparation before datataking
|
| read all logbook and shift entries | | | | | | | | | |
|
| Begin one hour before datataking | | | | | | | | | |
|
| open | Smartfact | | | | | | | | |
|
| | showlog.php | | | | | | | | |
|
| | GTC-Allsky camera and Magic weatherstation | | | | | | | | |
|
| create new thread in logbook | start Shift summary | | | | | | | | |
|
| connect to La Palma | establish VPN-connection | | | | | | | | |
|
| | ssh to newdaq | | | | | | | | |
|
| | screen on newdaq | | | | | | | | |
|
| | vnc on gui and aux:1 | | | | | | | | |
|
| plan schedule | edit schedule.js | | | | | | | | |
|
| | don't forget Startup and Shutdown | | | | | | | | |
|
| | insert schedule to DB | | | | | | | | |
|
| | write planned schedule in shift summary | | | | | | | | |
|
| telescope status | start tpoint CCD (via page 10.0.100.230) | | | | | | | | |
|
| | check telescope status in IR cam and tpoint CCD | | | | | | | | |
|
| | check weather conditions (all-sky cam and magicweather) | | | | | | | | |
|
| Startup
|
| Start Drive | PWR_CONTROL/TOGGLE_DRIVE | | | | | | | | |
|
| unlock drive | DRIVE_CONTROL/UNLOCK | | | | | | | | |
|
| Datataking
|
| start datataking script | dimctrl --start scripts/Main.js | | | | | | | | |
|
| write logbook entries | | | | | | | | |
|
| monitor the system | | | | | | | | |
|
| monitor the currents | adapt schedule, if necessary | | | | | | | |
|
| add comments to the Run-comment DB | | | | | | | | |
|
| monitor the QLA Website | | | | | | | | |
|
| Shutdown
|
| stop datataking script | dimctrl --stop | | | | | | | | |
|
| check status of telescope | see below | | | | | | | | |
|
| Check status of telescope
|
| no script running? | dimctrl --stop | | | | | | | | |
|
| biasvoltage off? | BIAS_CONTROL/SET_ZERO_VOLTAGE | | | | | | | | |
|
| trigger off? (ftmctrl should be in state Idle) | FTM_CONTROL/STOP_TRIGGER | | | | | | | | |
|
| telescope status? | check telescope status in IR cam and tpoint CCD | | | | | | | | |
|
| telescope parked? | DRIVE_CONTROL/PARK | | | | | | | | |
|
| lid closed? | LID_CONTROL/CLOSE | | | | | | | | |
|
| biasctrl disconnected? | BIAS_CONTROL/DISCONNECT | | | | | | | | |
|
| logbook entries finished? | | | | | | | | |
|
| | stop tpoint CCD (via page 10.0.100.230) | | | | | | | | |
|
| stop Drive | PWR_CONTROL/TOGGLE_DRIVE | | | | | | | | |
|
