source: trunk

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @18219   9 years dneise resetting Configure before crate reset
(edit) @18218   9 years dneise introduced PFMINI_CONTROL to startup check
(edit) @18217   9 years dneise increased timeout, to cope for failing html parsing.
(edit) @18216   9 years tbretz Changed timeout for bias crate diconnect and toggling drive power to ...
(edit) @18215   9 years dneise deleted ratescan_plots.php
(edit) @18214   9 years dneise deleted plot_ratescan.py since Danielas version is now online
(edit) @18213   9 years Daniela Dorner updated script to run regularly
(edit) @18212   9 years Daniela Dorner small fix for certaindate check and prepared script to run in LP
(edit) @18211   9 years Daniela Dorner small fix for certaindate check
(edit) @18210   9 years Daniela Dorner fixed small bug
(edit) @18209   9 years Daniela Dorner fixed small bug
(edit) @18208   9 years Daniela Dorner added expert-on-call info
(edit) @18207   9 years Daniela Dorner adapted to ignore moon-entries
(edit) @18206   9 years Daniela Dorner website for ratescan quality plots
(edit) @18205   9 years Daniela Dorner added information and example ratescan to the plot
(edit) @18204   9 years Daniela Dorner updated code to treat new files after 20130818
(edit) @18203   9 years dneise made it mor quiet. added 'all' mode. inserted Zd angle into plot, and time.
(edit) @18202   9 years dneise less output needed
(edit) @18201   9 years dneise initial commit of page, which shows ratescan plots
(edit) @18200   9 years dneise initial commit of a script to create ratescan plots for the ...
(edit) @18199   9 years dneise reverting changes made in rev. 17956.
(edit) @18198   9 years dneise minor layout changes
(edit) @18197   9 years dneise changed text on humidity limits a bit
(edit) @18196   9 years dneise added comments about humidity plot.
(edit) @18195   9 years dneise added plotting of humidities inside camera
(edit) @18194   9 years dneise Workaround for FSC firmware bug. Auto Reconnect in case of checksum error.
(edit) @18193   9 years dneise Modified reaction on FSC state change. FSC connection state has ...
(edit) @18192   9 years tbretz Set correct server name.
(edit) @18191   9 years tbretz This implements th epossibility to load and save calibrations, an ...
(edit) @18190   9 years tbretz Added pfminictrl
(edit) @18189   9 years tbretz Moved Fletcher16 checksum claculation to tools.h
(edit) @18188   9 years tbretz Added Fletcher16 checksum calculation.
(edit) @18187   9 years tbretz New program to readout the arduino with the new temperature and ...
(edit) @18186   9 years tbretz Added sqmctrl
(edit) @18177   9 years Daniela Dorner macro to retrieve official data from QLA
(edit) @18176   9 years dneise increased timeout of waiting for DriveOff, took 5 seconds once.
(edit) @18174   9 years dneise Also this file has been changed by Daniela Dorner in February, while ...
(edit) @18173   9 years dneise Also this file has been changed by Daniela Dorner in February, while ...
(edit) @18172   9 years dneise Also this file has been changed by Daniela Dorner in February, while ...
(edit) @18171   9 years dneise renamed some variables
(edit) @18170   9 years dneise As discussed in the last telcon on 14.04.15, I implemented a new ...
(edit) @18169   9 years dneise on 21. or 22.02.15 Daniela Dorner made this modification. Since it's ...
(edit) @18168   9 years smueller log file is now opened, seeked close to the end and then read. This ...
(edit) @18167   9 years tbretz Print not only the identification of the script but also the user who ...
(edit) @18166   9 years Daniela Dorner updated IP for lidcam
(edit) @18158   10 years ftemme Added an additional photon acceptance to the simulation.
(edit) @18157   10 years Daniela Dorner fixed typo
(edit) @18156   10 years tbretz Added Reset to DrsCalibrateTime and removed the reading and writing of ...
(edit) @18155   10 years tbretz We now precalculate the DRS offsets. This is faster and allows to read ...
(edit) @18154   10 years tbretz Since the drs calibration is sorted in hw indices, the delays are ...
(edit) @18153   10 years Daniela Dorner improved logging
(edit) @18152   10 years Daniela Dorner added check if reading information from raw file works
(edit) @18151   10 years tbretz Added SetDelays(const TGraph&)
(edit) @18150   10 years tbretz Little improvement to output. Times now in UTC.
(edit) @18149   10 years tbretz Initiate an emergency shutdown also when an overcurrent is detected; ...
(edit) @18148   10 years tbretz std namespace missing; expand path name; consequently argument must ...
(edit) @18147   10 years Daniela Dorner added error message when reading delays-file failes
(edit) @18146   10 years Daniela Dorner fixed type of delays, added error message when reading delays-file failes
(edit) @18145   10 years Daniela Dorner line of pixel 0 had been lost - put it back
(edit) @18144   10 years tbretz Accounted for the change in exception handling.
(edit) @18143   10 years tbretz Made a mistake by not writing mean and rms.
(edit) @18142   10 years tbretz Added some explicit conversions, a const qualifier and removed an ...
(edit) @18141   10 years tbretz MMatrix was missing... how the hell could you ever link it?!
(edit) @18140   10 years tbretz Having the destructor abstract didn't link anymore... I don't know ...
(edit) @18139   10 years tbretz Replaced mktemp by mkstemp to avoid a linker warning.
(edit) @18138   10 years tbretz Use the compilers preprocessor for rootcint so that things like ...
(edit) @18137   10 years Daniela Dorner added usage of function getdata()
(edit) @18136   10 years Daniela Dorner ignore runs with a run number with more than 3 digits
(edit) @18135   10 years Daniela Dorner added mode to update aux data in case inserting in La Palma had a problem
(edit) @18134   10 years Daniela Dorner adapted table name to case sensitive
(edit) @18133   10 years tbretz The wrong function was called in case of SET_REFERENCE_PATCH
(edit) @18132   10 years tbretz Use delays from a text file and apply them to the data. Argument ...
(edit) @18131   10 years tbretz Read file with delays and apply pixel-to-pixel delays.
(edit) @18130   10 years tbretz Delays as posted by Max Noethe to the logbook converted to nanseconds ...
(edit) @18129   10 years dneise back-factored for loop from C++11-style to old-style
(edit) @18128   10 years tbretz Added the possibility to start a custom run.
(edit) @18127   10 years tbretz Report time as UTC
(edit) @18126   10 years tbretz Only go to Locked automatically when a shutdown was really initiatied.
(edit) @18125   10 years tbretz Implemeneted a locked state which is initiated by an automatic lid ...
(edit) @18124   10 years tbretz Implemented an emergency limit in raw adc counts at which, if ...
(edit) @18123   10 years tbretz Added interface to rread and write constants as fits file.
(edit) @18122   10 years tbretz Added ReadFitsImp and WriteFitsImp to read and write time calibration ...
(edit) @18121   10 years tbretz set::emplace is not known for the LP compiler.
(edit) @18120   10 years tbretz Added fitsselect
(edit) @18119   10 years tbretz Allow to access the calibration coefficients.
(edit) @18118   10 years tbretz
(edit) @18117   10 years tbretz Even if the state was OnTrack it could happen that the fDevCount was ...
(edit) @18116   10 years tbretz What is called 'breakdown voltage' here is actually the 'operation ...
(edit) @18115   10 years tbretz Some PostClose() should be PostClose(false)
(edit) @18114   10 years tbretz Added SLEEP task which is a shutdown without locking the drive and ...
(edit) @18113   10 years tbretz Added sleep as valid observation.
(edit) @18112   10 years tbretz Fixed a typo in a log text.
(edit) @18111   10 years tbretz Added SLEEP as new measurment type.
(edit) @18110   10 years tbretz Fixed a typo in a log-text.
(edit) @18105   10 years Daniela Dorner new coefficients for new FACT disp parametrization
(edit) @18104   10 years Daniela Dorner implmented FACT disp parametrization instead of MAGIC one
(edit) @18103   10 years tbretz Fixed a problem that the interrupt was only correctly handled if ...
(edit) @18099   10 years Daniela Dorner adapted to changes of RunGanymed.sh from 4 weeks ago
(edit) @18098   10 years Daniela Dorner fixed 2 bugs and improved logging
(edit) @18097   10 years tbretz Updated to v20r13
Note: See TracRevisionLog for help on using the revision log.